Database Info

install Navigon 6.2 on the Diamond

Hi,
I try to install Navigon on my Diamond. First time it hang and after restart Diamond set "Please insert Card" and since that I cannot install Navigon. I already deinstalled broken installation, but I cannot reinstall it. Every time I try I get Message "Installation not sussessful"

u r in the wrong forum.
any way... try to instal an another/newer version.
WBR
Siemens Lover

Why I´m in wrong Forum? Isn´t it the forum for HTC Touch Diamond?
MN6.2 is the newest Version and first Install worked, but after deinstall I cannot install again.

u r in the Diamond accessories forum!
make a softreset and then try to instal, if not, then do a hardreset.
Or try TomTomm 7 it is much better

TT7 is already installed on O2 Diamond. But I don´t like the routing and I don´t want to pay for TMC etc. For Navigon it´s all free over FM.
What is the correct forum for my problem?

here will u be right:
http://forum.xda-developers.com/forumdisplay.php?f=429

Hi
This worked for me:
Copy both folders "2577" and "MN6" to internal storage (using Diamond as flash drive)
Run "install05.cab" in the "2577" folder

genauso hab ich es gemacht. Beim ersten mal ist er dann bei 100% Progessbar hängen geblieben und nach dem Neustart und Start von MN6 kam die MEldung "Bitte Karte einlegen". Hab dann in WM unter Programm entfernen MN6 wieder entfernt und versucht nochmal Install05.cab aus zu führen. Jetzt krieg ich immer die Meldung "Installation fehlgeschlagen". Aber wenn ich aus dem Speicher im Ordner MN6 die MN6.exe starte läuft MN6. Umständlich aber so geht es. Anders wäre mir aber 1000mal lieber

You can add a programm shortcut to your TF3D programms tab using TF3D config

but only if it is correctly installed, isn´t it?

No, with TF3D config you can add any file on your device to the programs tab.

usb problems

Just bought a galaxy and retired the htc hd2....
So came here to get ics for it and cannot get my pc to recognize the phone.
I used different cords downloaded the drivers 1.3.2200
Tried the usb debugging check box, settings -wireless- usb utilities.....
None of it works any ideas?

clean the usb port on the phone. itll work then

cederrowe said:
Just bought a galaxy and retired the htc hd2....
So came here to get ics for it and cannot get my pc to recognize the phone.
I used different cords downloaded the drivers 1.3.2200
Tried the usb debugging check box, settings -wireless- usb utilities.....
None of it works any ideas?
Click to expand...
Click to collapse
When I first got my Gs2 LTE and before I rooted it etc. I connected with Kies on my PC. part of the process involved d/ling the proper drivers. At least it'll let you know if the connection is working.
Stew

Did I download the proper drivers? And are these the phone drivers or for my PC?

Killadude said:
clean the usb port on the phone. itll work then
Click to expand...
Click to collapse
Cleaned the crap out of it still nothing!
It will charge but no usb?

cederrowe said:
Did I download the proper drivers? And are these the phone drivers or for my PC?
Click to expand...
Click to collapse
Did you use Kies?

stoopendis said:
Did you use Kies?
Click to expand...
Click to collapse
You mean the kies air thats on the phone? ok used it and got into the phone but wont i need the usb to move forward with ics?

cederrowe said:
You mean the kies air thats on the phone? never used it.
Click to expand...
Click to collapse
NO. It's kies that you load onto your PC. (It takes a while for it to install itself). I can't remember all the steps but it guides you. Then you connect up via USB and away you go.
Stew
http://www.samsung.com/ca/support/usefulsoftware/KIES/JSP
http://www.samsung.com/us/kies/

cederrowe said:
You mean the kies air thats on the phone? ok used it and got into the phone but wont i need the usb to move forward with ics?
Click to expand...
Click to collapse
If you can connect with Kies then you have the right drivers. You've got USB debugging enabled in settings/developer options. Now when you connect to the pc usb port you should get a popup on the status bar pull that down and hit turn on USB storage. That should be all you need.
OH, I forgot you're still on Gingerbread and unrooted ..is that right?

stoopendis said:
If you can connect with Kies then you have the right drivers. You've got USB debugging enabled in settings/developer options. Now when you connect to the pc usb port you should get a popup on the status bar pull that down and hit turn on USB storage. That should be all you need.
OH, I forgot you're still on Gingerbread and unrooted ..is that right?
Click to expand...
Click to collapse
Correct phone is unrooted and stock, Just downloaded keis and updating will follow tutorial now if i get connected. Thanks.

Checked usb debugging and still no pull down notice, just charges. Kies doesnt notice it, just says plug in device.

cederrowe said:
Checked usb debugging and still no pull down notice, just charges. Kies doesnt notice it, just says plug in device.
Click to expand...
Click to collapse
1. From the Home screen, tap  Settings  Wireless
and network  USB utilities Connect storage to PC.
This is from my Rogers version manual.

1. From the Home screen, tap  Settings  Wireless
and network  USB utilities Connect storage to PC
If i have my usb cable in it pops up "usb connected. remove the cable" if i do that and press "ok" takes me back to "connect storage to pc" if i click it then it says "turn usb debugging off" click ok then says "connect usb to mass storage" ido that and it takes me right back to the "connect storage to pc"
Never do I get a pull down usb connected other than charging.

cederrowe said:
1. From the Home screen, tap  Settings  Wireless
and network  USB utilities Connect storage to PC
If i have my usb cable in it pops up "usb connected. remove the cable" if i do that and press "ok" takes me back to "connect storage to pc" if i click it then it says "turn usb debugging off" click ok then says "connect usb to mass storage" ido that and it takes me right back to the "connect storage to pc"
Never do I get a pull down usb connected other than charging.
Click to expand...
Click to collapse
Ya that pull down thing is probably only in ICS..
OK at any time during this connection process are you able to look at you phone storage via Windows Explorer on your PC?
Here's the rest from my manual!
1. From the Home screen, tap  Settings  Wireless
and network  USB utilities Connect storage to PC.
2. Connect a USB cable from your phone to your PC.
3. Tap Connect USB storage. Both the phone and computer
display icons to show that the device is mounted. As soon
as the connection is established a drive letter is assigned to
the phone’s storage device.
A pop-up window displays on the PC when connected.
4. Open the folder to view files.
5. Copy files between your PC and your memory card as
required.
6. To exit, tap Disconnect storage from PC.

Got it! After doing a reset of phone for the fourth time with the tech guy it finally recognized the usb?????? Geuss ill keep a eye on it. Thanks for all the help.

So.....which Rom you gonna flash?
Sent from my SAMSUNG-SGH-I727 using xda premium

I just put in the first leak just to get going, looking for a stable rom as I've done my share of reporting on bugs..... any ideas on a stable daily rom? Also after I loaded the ics ucle4 I rerooted the phone installed cwm and super user and titanium backup says I'm not rooted?

Sounds familiar. Have you installed busy box?
Roms are all phone model dependent. I'm using SkyIcs.
Sent from my SAMSUNG-SGH-I727 using xda premium

Mine takes awhile to be recognized by pc or mac , now my s2 is retired i use my iphone 4s cause it works.
Sent from my SAMSUNG-SGH-I727 using XDA

cant connect to PC

im running EOS JDQ39 nightly B202 rom with kat kernel
when i connect the tablet or tablet in the dock to pc it chargers but doesn't show up as a drive or as the transformer
any help would be great thanks

combat goofwing said:
im running EOS JDQ39 nightly B202 rom with kat kernel
when i connect the tablet or tablet in the dock to pc it chargers but doesn't show up as a drive or as the transformer
any help would be great thanks
Click to expand...
Click to collapse
Does it give a message hat it failed to install a driver on the PC? If so, it is probably a bad USB cable.
Another thing to try is to to Settings - Storage - Menu key (top right) - USB connection - tick MTP. If that does not help, tick th PTP option.

frederuco said:
Does it give a message hat it failed to install a driver on the PC? If so, it is probably a bad USB cable.
Another thing to try is to to Settings - Storage - Menu key (top right) - USB connection - tick MTP. If that does not help, tick th PTP option.
Click to expand...
Click to collapse
thanks neither of those worked, if its the cable where's the best place for replacements they are not a common cable

I bought one off of amazon. I would recommend a genuine Asus cable.

[Q] Rooted but cannot access internal storage

Hi,
I am running ViperROM and have USB debugging enabled.. But when I plug in my phone to my PC I am not able to browse to it to copy files/roms to it.. I've been downloading them through the browser which is a pain.
How can I access internal storage?
Thanks!

logie said:
Hi,
I am running ViperROM and have USB debugging enabled.. But when I plug in my phone to my PC I am not able to browse to it to copy files/roms to it.. I've been downloading them through the browser which is a pain.
How can I access internal storage?
Thanks!
Click to expand...
Click to collapse
Try disabling USB debugging
Sent from my HTC6525LVW using Tapatalk

Still nothing... I see the HTC sync manager on the top of my notifications about running from the CD-Rom.. which is confusing as I have that disabled through my ROM i thought.
Anything I can run from terminal emulator possibly?
Thanks! <3

logie said:
Still nothing... I see the HTC sync manager on the top of my notifications about running from the CD-Rom.. which is confusing as I have that disabled through my ROM i thought.
Anything I can run from terminal emulator possibly?
Thanks! <3
Click to expand...
Click to collapse
I figured it out.. It was the stupid USB cable.. would charge but not do data. Sorry! *smacks forehead*

Problem connecting to PC

Hi, I have just received my new phone, but when I connect it to the PC via USB cable I only get this attached. How can I make it known as an external memory?
Thanks for your help
Massimo

Run the driver installer from in that cd drive
Then on the phone, swipe down to your notification view and select the charge type notification and select
"Transfer files"

Hunter3U said:
Run the driver installer from in that cd drive
Then on the phone, swipe down to your notification view and select the charge type notification and select
"Transfer files"
Click to expand...
Click to collapse
That's what I have done... but still open CD Oneplus Drivers...
I can choose between Transfer files, Tethering, MIDI, PTP
My Pc is Windows 10 last update

elconfa said:
That's what I have done... but still open CD Oneplus Drivers...
I can choose between Transfer files, Tethering, MIDI, PTP
My Pc is Windows 10 last update
Click to expand...
Click to collapse
If you go to Control Panel > Programs and Features, do you have the Oneplus drivers in that list?

Hunter3U said:
If you go to Control Panel > Programs and Features, do you have the Oneplus drivers in that list?
Click to expand...
Click to collapse
Yes, OnePlus USB Drivers 1.00

Hello! I am having this exact problem with my Oneplus 7t Pro. Was anyone, perhaps the original poster, ever able to solve it?

I need original cable for connecting with pc
Maybe is it problem
Sent from my GM1910 using Tapatalk