[Q] [Issue] Battery Icon while Powered Down - Verizon Samsung Galaxy S III

Is this 'normal'?
I just got done flashing LiquidSmooth 2.7 onto my Verizon Samsung GS3.
And I noticed when the device is 'Shutdown' the battery icon will appear with a "swirly ball" in the center then blank out and reappear with a heavily color-distorted image....it reminds me of running Windows in 256 color mode.
I also notice that in Windows the phone displays a "?" inside the battery next to "Power Source: Battery"
Everything else appears to be fine. I used CASUAL* to unlock and root. And used TWRP for Recovery Mode. Wiped both Delv and Cache, even did a factory reset prior to install the LS ROM.
*http://forum.xda-developers.com/showthread.php?t=2332825
Model number
SCH-I535
Android version
4.2.2
Kernel version
3.4.45-cyanogenmod-g78e800d
[email protected] #1
Tue Jun 18 05:22:20 EDT 2013
LiquidSmoth verison
Liquid-JB-v2.7-OFFICIAL
Build number
liquid_d2vzw-userdebug 4.2.2 JDQ39E
eng.liquid.20130618.050426 test-keys

Related

Have to hard reset to power into android!

Firstly hey I'm new here Long time "lurker" & user of XDA for both Desire HD & Atrix
The RAZR HD I purchased off ebay is being a little dicky, I'll run you through the process
-- Unboxed , plugged it in , green LED light is on
-- Try to turn it on , LED light is gone and will not return
----End up having to enter recovery mode to boot into android
-- Phone works fine , installing apps etc ( used for about 6-7 hours)
--LED is working for sms etc
--Turn it off this morning to check that it is okay now (It's not).
So when i try to turn it on normally a green wind-up droid with a spinning blue sphere inside of it appears with a blue loading bar.... this goes on for a minute before the green droid appears on it's back with a error sign above it (The phone then turns off)
From there the only way i can actually turn on the phone is the hold power+Down volume and then switch to up volume to enter recovery which stays for a second and then boots up into a reset phone (Due to the hard reset of power+Down volume i guess?)
When it was running it was going fine!, I can't really be bothered sending it back & would rather fix it myself
I'm thinking the error has something to do with the battery? (e.g corrupted battery stats?)
System Version: 98.21.13001.XT925.Telstra.en.AU
Android Bersion: 4.1.2
Baseband: VANQUISH_U_BP_100700.250.66.01P
Kernel Version: 3.0.42-gc95e53f
[email protected] #1
SMP PREEMPT Tue Nov 13
AP Flex Version: GAS_ASIA_LSAVNQJBTELSTRA_P010
'' '' ''A010
To me the Baseband & Kernel look 3rd party?
Anyway if you guys have any insight into this that would be great
Thanks
PS: I don't mind flashing or anything to get this fixed
jhhindle said:
Firstly hey I'm new here Long time "lurker" & user of XDA for both Desire HD & Atrix
The RAZR HD I purchased off ebay is being a little dicky, I'll run you through the process
-- Unboxed , plugged it in , green LED light is on
-- Try to turn it on , LED light is gone and will not return
----End up having to enter recovery mode to boot into android
-- Phone works fine , installing apps etc ( used for about 6-7 hours)
--LED is working for sms etc
--Turn it off this morning to check that it is okay now (It's not).
So when i try to turn it on normally a green wind-up droid with a spinning blue sphere inside of it appears with a blue loading bar.... this goes on for a minute before the green droid appears on it's back with a error sign above it (The phone then turns off)
From there the only way i can actually turn on the phone is the hold power+Down volume and then switch to up volume to enter recovery which stays for a second and then boots up into a reset phone (Due to the hard reset of power+Down volume i guess?)
When it was running it was going fine!, I can't really be bothered sending it back & would rather fix it myself
I'm thinking the error has something to do with the battery? (e.g corrupted battery stats?)
System Version: 98.21.13001.XT925.Telstra.en.AU
Android Bersion: 4.1.2
Baseband: VANQUISH_U_BP_100700.250.66.01P
Kernel Version: 3.0.42-gc95e53f
[email protected] #1
SMP PREEMPT Tue Nov 13
AP Flex Version: GAS_ASIA_LSAVNQJBTELSTRA_P010
'' '' ''A010
To me the Baseband & Kernel look 3rd party?
Anyway if you guys have any insight into this that would be great
Thanks
PS: I don't mind flashing or anything to get this fixed
Click to expand...
Click to collapse
Hey
I had this problem with 2 razr HD telstra phone after Updated to JB and after factory reset exact thin happened.they replaced the first one and sent the second one to repair.
Im 100% sure that this issue is with Telstra JB update.
I stl waiting for device!!!!
cheers
Would reflashing the Telstra JB Rom fix the problem??
[solved]
I had exactly the same problem with a brand new unused RAZR HD,
here is the solution (maybe for all RAZR phones?) [german]
I try to translate in a few words:
Code:
you need to hold down the reset IMMEDIATELY both volume keys
until the boot loader (I hope I do not rename the whole thing wrong now) appears.
In the menu that appears choose the recovery point, after which
first the screen goes black and then the Android males appear.
Now press again BOTH volume buttons and the menu (similar to the
ClockworkMod Recory menu) to reset the device is displayed.
[it took me some tries to figure out the right point of time]
Here you have the menu option to reset the data and cache
area [ I did this twice ]
and then perform a reboot of the Razr.
After performing these steps in the Bootloop kicked me on and
I could no longer continue with the set.
ATTENTION: When resetting all the data in the internal memory
(contacts, SMS, calendar entries, etc.) will be deleted ...
the Micro SD should remain untouched!
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
jhhindle said:
Would reflashing the Telstra JB Rom fix the problem??
Click to expand...
Click to collapse
I think NO,
because there must be some error on data partition, flashing an new ROM afaik touches only the system partition

Tweaked 3.2 help

Well apparently since I am a new member this is the only place I can post questions. So please don't get up my case.
I am running
Hardware version i510.06
Model Number SCH-i510
Firmware: 2.3.6
Baseband: i510.06 V.FP5
SCH-i510.FP5
Kernal: 2.6.35.7.FP5 (the Imnuts Kernal)
Build number: SCH-i510.FP5
Mod Version: Tweaked 3.2
Installed the "imnuts" kernal last night followed by tweaked 3.2
The phone is not stuck in a boot loop, however it will not turn off. Every time I turn the phone off it just turns right back on as if I hit a reboot or restart instead.
Anyone?
Update: If I power off and wait for the blank screen and plug it in, it loads up the charging screen and does not turn on. havnt unplugged it yet to see if it does turn on (doing the battery calibrate thing)
done
So after finishing the battery calibration I turned the phone on and back off and its working fine now.

BC1003 flytouch 7 10.1 URGENT help

Hi there Everyone, I have got this Flytouch 8 tablet today, model number is BC1003, android version 4.0.4, baseband version 1.5rc4, kernel version 3.0.8+ [email protected] #68 Sat Dec 8 08:54:36 CST 2012, I tried to reboot into recovery and now it is stuck on the android boot up screen and no matter what button combination I press including the reset button it will not come off the android boot screen, I can get the android figure laid on it's back with red exclamation mark but nothing else, how do I reset this pleaseeeeeeeeeeeeeeeeee

Google nexus S goolge logo freezing problem

for fectory resetting when click on recovry then suddenly a google logo apper on screen every time and freez, with lock icon at down side screen. some one can tell that what to do
Cell is already unlocked
model no. nexus S
android version: 2.3.4
kernel version: 2.6.35.7-ge382d80
build no: GRJ22

Problem after upgrade - From Kitkat 4.4.2 EMUI 2.3 to Official Lollipo 5.1.1 EMU 3.1

After upgrade from Kitkat 4.4.2 to Lollipop 5.1.1, battery status showing 100% always.
Device details:
Model number: Honor H60-L04
Previous Build number: H60-L04V100R001C00B109SP01
Current Build number: H60-L04C151B510​
Before initiating upgrade battery status 90% exactly. After I upgrade to Lollipop 5.1.1 EMUI 3.1 using local update. After complete battery status showing 100% always. I got update notification and I installed online update H60-L04C151B520. But, battery still 100%. After I did Wipe data/Factory reset (Volume up + Power Buttons). Also I used my phone more than 2 hours. Still same problem.:silly:
I thought problem with installation. So I force re-install to official update using 3 button method ( Volume up + Volume down + Power Buttons). But no changes. Still showing 100%.
How to fix it?
--------------------------------------------------------------------
:laugh::laugh:I got unlimited battery. Feeling very happy. :laugh::laugh:
--------------------------------------------------------------------
​
Current Version Image:
hxxps://i.imgur.com/YD2Lzj9.png
Previous version image:
hxxps://i.imgur.com/cVFHWmE.jpg

Categories

Resources