Database Info

Cannot Access Internal Storage After S-off

I S-off'd my HTC Sensation using Revolutionary's S-Off & recovery tool. I also installed the Superuser app to give me 'root' although I simply cannot access the phone's internal memory. (only my 8GB SD card is recognized by W764bit).
I've tried everything I can think off, including: uninstalling/reinstalling the drivers, rebooting, enabling USB debugging, factory rest, renaming the ext-SD's drive from H to Z, enabling disk connection type, installing HTC Sync, mounting/demounting,
Bizarrely, when I physically remove the ext SD card Windows 7 displays a drive, although its unaccessable and PC connect goes into charge only mode with 'disk' option not available.
I did have trouble installing Superuser 3.0.7 and had to retry several times, also in the apps menu its icon is a green android appose to a grey andoid with cross bones. Does this mean my phone's not rooted?
I also noticed whilst backing up using the recoverythat it does find the ext SD. I'm in a bit a situation because I used Revolutionary so I could install ICS, and now it's available over OTA I can't install it because of the S-Off.
Would it be easier for me to reurn it to stock and just install over OTA?
I've tried everything I can think of and searched everywhere to resolve this issue so help much appreciated.
Cheers Ian

Internal memory isn't meant to be accessed.
No the green Android is the new icon, you should be rooted. To check download an app like Titanium and see if you can obtain root access.
Is your SD card formatted as an EXT partition?
Easiest way to get ICS from where you are is to follow this guide: http://forum.xda-developers.com/showthread.php?p=21989107
I assume you've already done SuperCID so backup your stuff and then move onto the part that says update firmware.

Do you mean you can't access the SD card from the phone? Or just from the computer?
If you can view the SD card contents from within the phone just fine, it could be that you formatted the SD card with a file structure that's incompatible with Windows.

Thanks for the reply K0mic... When I said memory I meant storage, or is this the came case?
If Revolutionary S-Off is a bootloader unclocker then use I've SuperCID (sorry complete noob), but yeah I got the beta key.
The SD card is FAT32 ATM which will el[plain why the backup doesn't recognize it What's the best way to format it to EXT? is it using 3rd party software or can it be done with Android?
I went to follow this guide:
w w w .androidauthority.c o m/sensation-install-ics-aokp-rom-63544
when installing ICS and 'step 4' is the problem I have; I simply cannot access the Sensation's Internal SD card :/ Windows only displays the phone's fitted 8GB microSD card :/

Skipjacks said:
Do you mean you can't access the SD card from the phone? Or just from the computer?
If you can view the SD card contents from within the phone just fine, it could be that you formatted the SD card with a file structure that's incompatible with Windows.
Click to expand...
Click to collapse
I can view the microSD fine with W7, but maybe that's because its Fat32. It's the internal SD card I can't access, or is it because that one has an EXT partition?
Cheers Ian

You cannot access your internal memory (it's not an internal sd card) from windows explorer. You'll need to use adb in order to obtain access to your internal memory through your pc...
android-dls.com/wiki/index.php?title=ADB

Ahh... that explains why then I take it the internal storage is where the HBoot and ROM resides?
I think I may has misinterpeted what ext SDcard means. (I thought it mean external, i.e. the microSD card you can access/remove. So, when a website's guide tells to to place a ROM's file in the internal SD and not the EXT SD they mean place the file on the FAT32 partion of the same physical micro SDcard that contains both FAT32 and EXT partitions correct?
And the true internal storage is where the ROM (GB/ICS) and Hboot is located along with all of the OS' system files? If this is the case I take it there's no real reason for the average person to want or need to access the device's internal storage unless allowing a tool like Revolutionary to write to it.
I hope I've explained myself enough, so do I have the right understanding now?
Cheers Ian

Infiltrator2K said:
Ahh... that explains why then I take it the internal storage is where the HBoot and ROM resides?
I think I may has misinterpeted what ext SDcard means.
Cheers Ian
Click to expand...
Click to collapse
You can see your SD card in windows 7 (PC) but not the internal memory. If you want to flash something in to your phone's internal memory (hboot, boot, system, recovery etc) through the PC, you can use adb command. Or you can flash the zip file thorough SD card with custom recovery.
If you want to change the android system file on phone, you can use root explore (you can find it on google play) or other apps.

gordonlu said:
You can see your SD card in windows 7 (PC) but not the internal memory. If you want to flash something in to your phone's internal memory (hboot, boot, system, recovery etc) through the PC, you can use adb command. Or you can flash the zip file thorough SD card with custom recovery.
If you want to change the android system file on phone, you can use root explore (you can find it on google play) or other apps.
Click to expand...
Click to collapse
So all I need to do to get ICS on my S-off Sensation is download the relevant ICS ROM to my micro SDcard and run it from recovery?
Also, is recovery not recognizing Ext SD because I've not created the partition yet? If so what is the EXT partition actually used for?
Cheers Ian

Infiltrator2K said:
So all I need to do to get ICS on my S-off Sensation is download the relevant ICS ROM to my micro SDcard and run it from recovery?
Also, is recovery not recognizing Ext SD because I've not created the partition yet? If so what is the EXT partition actually used for?
Cheers Ian
Click to expand...
Click to collapse
If you want to get custum ICS ROM, first, you need a s-off phone, then flash a custom recovery, then flash adequate firmware (hboot, radio) with custom recovery, then flash the custum rom. You can found detail guide and files in sensation Rom develope forum.
The sencond question, I don't know what kind of problems you met. When you enter recovery, you can choose install zip from SD card. Or you met another promblem?
I hope these answer can help you
Sent from my HTC Sensation XE with Beats Audio using XDA Premium HD app

I think I am kind of get what you problem is, as I read thru the site you give it seem have some mistake at no 4. Because you want see or never have access to internal memory of the phone. Just place the ROM on the SD card. as you see on step 9 you have to “wipe data/ factory reset” the phone. This procedure will definetly remove/delete the rom if you place in internal memory. The Clock Work Recovery also don't have function to install ROM from internal memory. I think maybe some miss typo on the site.
Another things is if you are now on stock Gingerbread not custom ROM you'll be get the FOTA update. Since S-OFF and rooting don't bother the update file, but you have to change to Default or original Recovery because you will get hang on htc white screen after reboot. Maybe the FOTA just not been role up on your country/carrier or unknown reason.
*sorry for my bad english

gordonlu said:
If you want to get custum ICS ROM, first, you need a s-off phone, then flash a custom recovery, then flash adequate firmware (hboot, radio) with custom recovery, then flash the custum rom. You can found detail guide and files in sensation Rom develope forum.
The sencond question, I don't know what kind of problems you met. When you enter recovery, you can choose install zip from SD card. Or you met another promblem?
I hope these answer can help you
Click to expand...
Click to collapse
XaQi nailed it... it was a typo on the websites behalf that threw me. Many thanks with your help though and for explaining things, it's much appreciated
XaQi 101 said:
I think I am kind of get what you problem is, as I read thru the site you give it seem have some mistake at no 4. Because you want see or never have access to internal memory of the phone. Just place the ROM on the SD card. as you see on step 9 you have to “wipe data/ factory reset” the phone. This procedure will definetly remove/delete the rom if you place in internal memory. The Clock Work Recovery also don't have function to install ROM from internal memory. I think maybe some miss typo on the site.
Another things is if you are now on stock Gingerbread not custom ROM you'll be get the FOTA update. Since S-OFF and rooting don't bother the update file, but you have to change to Default or original Recovery because you will get hang on htc white screen after reboot. Maybe the FOTA just not been role up on your country/carrier or unknown reason.
*sorry for my bad english
Click to expand...
Click to collapse
I am running what I believe stock Gingerbread, but I used Revolutionary Tool to aquire S-off and installed Clock Work Recovery. I installed Superuser for root, although I believe this to be just a normal app and nothing to do with the Hboot process.
I used the Revolutionary tool so I could manually install ICS as at the time it wasn't available OTA, although it became available yesterday, but now I've tinkered around with the Revolutionary tool it won't install, only hanging with the red exclamation mark.
That typo you so rightly pointed out to me cost me a lot of time wasting. I spend hours trying to resolve what I thought was an issue Muppets who wrote those instructions!
How can I install ICS OTA now? Either way I can't install atm as things are.
Cheers Ian

Always check the software update on settings.
If you can find a link to download the compatible FOTA file or RUU you may go with it. But remember to install Stock Recovery before OTA I use this guide to get back to Stock Recovery it may help you to. [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
Other's option is install custom ROM go to Sensation Android Development, there are many great custom ROM you may find one that suite you. Just follow the instruction carefully.
If you want something similar to OTA you may want to try this [ROM] HTC Sensation *STOCK* ROMs | 3.32.401.x | Ice Cream Sandwich | HTC Sense 3.6 but I recommended [ROM] Android Revolution HD 6.6.0 | ICS | High Quality & Performance | 3.32.401.105 for many support and guide.

Sweet
XaQi 101 said:
Always check the software update on settings.
If you can find a link to download the compatible FOTA file or RUU you may go with it. But remember to install Stock Recovery before OTA I use this guide to get back to Stock Recovery it may help you to. [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
Other's option is install custom ROM go to Sensation Android Development, there are many great custom ROM you may find one that suite you. Just follow the instruction carefully.
If you want something similar to OTA you may want to try this [ROM] HTC Sensation *STOCK* ROMs | 3.32.401.x | Ice Cream Sandwich | HTC Sense 3.6 but I recommended [ROM] Android Revolution HD 6.6.0 | ICS | High Quality & Performance | 3.32.401.105 for many support and guide.
Click to expand...
Click to collapse
Top man I found a link on how to remove Revolutionary and return the phone to stock although I don't see the point if I can install tweaked ROMs like that I take it I can install the ROMs with S-off and rooted?

You can install OTA updates, or custom ROMs with s-off and root. The catch is that you'll need to change between recoveries to do so...
OTA updates = stock recovery
Custom ROMs = CWM or EXT4 recoveries
Follow the link provided two posts up, or let me know if you want a PG58IMG.zip I made for the stock recovery. I made another for CWM touch but I won't share warez.
Also, if you're going to flash a custom ICS rom you'll need to update your firmware first to one of the 3.32 releases...

HELP! Optimus 3D has no memory?

I have an Optimus 3D from Rogers (the P925g) and I wasn't able to use many roms because I didn't have the 21e baseband. I tried flashing it, after I flashed one for the P250 (which apparently would work on mine), the phone had decided that the internal memory doesn't exist now. I can mount the SD card, but both the usable memory and the space reserved for apps is missing. The phone still boots and I can access a few select apps, but I am really at a loss for how to fix this.
Any help is VERY MUCH appreciated!

BG64 said:
I have an Optimus 3D from Rogers (the P925g) and I wasn't able to use many roms because I didn't have the 21e baseband. I tried flashing it, after I flashed one for the P250 (which apparently would work on mine), the phone had decided that the internal memory doesn't exist now. I can mount the SD card, but both the usable memory and the space reserved for apps is missing. The phone still boots and I can access a few select apps, but I am really at a loss for how to fix this.
Any help is VERY MUCH appreciated!
Click to expand...
Click to collapse
You just have many data in your device. it is like to install win95, win2000 winXP and win7 in one folder on your computer
Open CWM -> go to mounts and storage
Format System
Format Data
Format Cache
DO NOT REBOOOT !!!
Install the ROM you want from ZIP file.

p-vlad said:
You just have many data in your device. it is like to install win95, win2000 winXP and win7 in one folder on your computer
Open CWM -> go to mounts and storage
Format System
Format Data
Format Cache
DO NOT REBOOOT !!!
Install the ROM you want from ZIP file.
Click to expand...
Click to collapse
That's just it- I can't even access CWM anymore. I can't install ROM Manager to flash CWM because I don't have any app memory, and I can't even flash it using my computer because, again, the phone thinks there is no memory to store apps in.
Would screenshots help in this situation?

Well. Apparently, after reflashing the same thing maybe 7 different times, it has decided to work. So, thanks for anyone who looked into this. Sorry about all this too. -.-

[root tool] Toshiba Thrive 10.1" ICS

(Now, I know this is not in the right section or even in the device's page, but...)
Forewarning: I am NOT responsible for any damages caused by running this tool. (You ran it, not me.) Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Pio_masaki and I have been working hard for almost a year to get root on the ICS version of the Toshiba Thrive 10.
Last night, I was able to finally sneak past sealime.ko and have it work.
It uses the "root any ICS device" tool, with special modifications specifically for the Thrive 10.
(can't post any links, so it's on the "thrive-hackers" github page.)
Special note: While it is set up for OSX ADB, I have not been able to find any binaries.

Are you saying that we are close to a root method for Thrives running Toshiba ICS?

rohads said:
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
Click to expand...
Click to collapse
Saying there is a method to root it now, yes, we got around sealime.ko. This means we can flash the HC bootloader which is unlocked, which allows custom recovery and kernels/ramdisks (boot.img) to be used.
BTW the link is https://github.com/Thrive-Hackers

congrats guys ! very awesome work !
jdsingles deodexed ROM w/ agat63's 1.3 kernel Suped up w/ CB 6.26.13

More specifically, it bypasses sealime to flash the unlocked bootloader. What we did was we MVd /dev/block/mmcblk0p6 to 0p9. It's a pure fluke Pio and I found out that it works. We found out that sealime was explicitly blocking write to 0p6, so he semi-sarcastically said to move it. I ran the mv command, whadda ya know? It worked!
'Course, getting the tool completed wasn't as simple as that...
PS: Could we get this moved to the Toshiba Thrive Development section?

Have instructions been written for the process?

worked for me
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!

navyguy said:
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
Click to expand...
Click to collapse
Try fastboot flash:raw.

Is there any need to do a backup before rooting?

TubaMeister said:
Is there any need to do a backup before rooting?
Click to expand...
Click to collapse
Not explicitly, but it wouln't hurt in case your tablet got into contact with allspark.... er, the bootloader didn't flash, and you're stuck in a bootloop.

easy root and CWM recovery
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/

Uh oh
robyn402 said:
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Click to expand...
Click to collapse
I installed the drivers, used the root tool, the restore was successful, but now the tablet is stuck in a boot-loop mode.
The root tool was running, there was a line that said the screen would go blank, which it did, and it stayed there for several hours. When I came back to check on it, the tablet was off, so I turned it on. That's when I found the boot loop. It'll get to the home page, tell me that nova launcher has stopped, then loop back to the moving stars section of the boot screen.
Any ideas on what to do now?

DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)

Kyonex said:
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Click to expand...
Click to collapse
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?

1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)

DLeach4512 said:
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
Click to expand...
Click to collapse
also make sure you open the zip and place the update.zip on your card -
From my GSIII - jd's Stock/Rooted/Deodexed 4.3

Kyonex said:
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
Click to expand...
Click to collapse
Excellent!
1) I had to extract "update.zip" from the ROM I had downloaded.
2) I re-formatted the card I was using to FAT32 instead of FAT.
3) I was able to get the install started with no trouble after following your directions.
BIG THANK YOU FOR THAT!
I got a successful install message, and then it booted!
Thanks a million!

Problems after Mount Changes
I changed the mount as described on thriveforums.org to allow apks and data to go to the external sd rather than "shared" internal memory.
I now have the situation with less free memory available on the sd card than on internal. The CWM backups went on the physical card- a 32 G one almost full. Will look for a major mfr 64 Gig.
One or so issues with the revised mounts where the external sd card is now internal. They relate to making backups with dalepl's latest CWM 6.0.1: where to put CWM backups for now and are they being made correctly with the revised mounts?
The backup made prior to the mount change looks normal: a single, dated/numbered folder about 2.6 Gb, 6 files: boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img and system.ext4.tar. However, the one made after the mount change also has a dated, numbered folder of only 15.8 Mb and 7 files: .android_secure.vfat.dup, boot.img, cache.ext4.dup, data.ext4.dup, nandroid.md5, recovery.img and system.ext4.dup. There is a second folder associated with the later bu called "blobs", which is huge --2.76 Gb, 3292 folders and 6581 files. Is this an expected result and any one think it might be a valid bu?
Also, it went on to the external SD (now "internal") and total storage use is now almost 28 Gb out of 30.2. I now have the situation with less free memory available on the sd card than on internal. The stuff there looks ok, pix movies and music plus CWM bups of 5.5 G and App_Backup_Restore archived apks at 2.8 Gb. So, I copied the cwm backups folder to the real internal memory, now sdcard2. I assume this true internal memory might get wiped during a restore so, this is not a valid storage site for this? And, if I put copies on a spare card, will that really work if my downloaded apps are on the original card, eg does the CWM backup copy the external card apps?
As I note, for some reason this 'blobs' folder won't copy easily to a USB via the Thrive or Win 7 pc. It also won't copy to a Win 7 HD partition where I store my Thrive stuff. (Update: I was able to do a wireless transfer to my pc and then, from there, to a spare SD card.)
Any thoughts? Should I go back and change the mounts to default?
BTW, I find FolderMount has no real use with the changed mount on the Thrive unless someone tells me otherwise. With the Thrive mounting the external card as internal, files go to the physical card.

gberpa,
I don't understand your question - it is very long. But I know that custom recovery (CWM / TWRP) itself remounts sdcard and internal memory before wipe process so it will wipe correct memory (only internal memory). If you need to change the ROM you don't need to worry about mounting paths because after wipe mounting paths will be restored to original.

Partition layout of Toshiba Thrive 10.1" ICS
AmEv said:
Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Click to expand...
Click to collapse
Can you give us information on the Toshiba Thrive 10.1" ICS partition layout and their names, please?
We would like to compare it to ours Toshiba Excite Pro (AT10LE-A, tostab12BA). A Dirty Cow enabled KingoRoot has given us a temporary root.
[Q] How Root Toshiba Excite Pro AT10LE-A-108 by dexxxZ
https://forum.xda-developers.com/showthread.php?t=2583677&page=6
Sent from my takee 1 using XDA Labs

[Q] internal sd card mount issue

hey guys i was trying to increase my phone's internal memory using sp flash tool and intall color os rom, ihad inavalid imei issue so i reverted back to stock rom and it didn.t work out for me. i even used the zip files to increase the memory using cwm. it didn.t work too. but now i am facing a new issue which is that i am not able to see the internal memory in my phone. so i want to know that how do i fix it. and is it why i am not able to install the color os rom?
thank you

amitm20 said:
hey guys i was trying to increase my phone's internal memory using sp flash tool and intall color os rom, ihad inavalid imei issue so i reverted back to stock rom and it didn.t work out for me. i even used the zip files to increase the memory using cwm. it didn.t work too. but now i am facing a new issue which is that i am not able to see the internal memory in my phone. so i want to know that how do i fix it. and is it why i am not able to install the color os rom?
thank you
Click to expand...
Click to collapse
was your internal sd card mounted?
1.is you imei restored?if not.. restore using imeifix.zip or mobile uncle tools
2.revert to stock rom with no partitions
3.increase system partition using zip(install custom recovery first) or sp flash tools... (follow instructions carefully)
4.install color os rom .(follow instructions)
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
amitm20 said:
hey guys i was trying to increase my phone's internal memory using sp flash tool and intall color os rom, ihad inavalid imei issue so i reverted back to stock rom and it didn.t work out for me. i even used the zip files to increase the memory using cwm. it didn.t work too. but now i am facing a new issue which is that i am not able to see the internal memory in my phone. so i want to know that how do i fix it. and is it why i am not able to install the color os rom?
thank you
Click to expand...
Click to collapse
also... please frame our questions properly.. i still cant understand what your problem is... is it invalid imei? or issue in flashing color os? or the sd card thing?
you mixed everything up... tell me the current status of your phone... and what exactly do you want...
if you want other members to help you.. your issues should be comprehendable

help
abhimanyu bajaj said:
was your internal sd card mounted?
1.is you imei restored?if not.. restore using imeifix.zip or mobile uncle tools
2.revert to stock rom with no partitions
3.increase system partition using zip(install custom recovery first) or sp flash tools... (follow instructions carefully)
4.install color os rom .(follow instructions)
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
also... please frame our questions properly.. i still cant understand what your problem is... is it invalid imei? or issue in flashing color os? or the sd card thing?
you mixed everything up... tell me the current status of your phone... and what exactly do you want...
if you want other members to help you.. your issues should be comprehendable
Click to expand...
Click to collapse
i got back my imei fixed through a local store. i tried everything which didn't work at that moment. now i have my imei and i used mtk droid tools to take a backup this time and tried the whole process again. i used sp flash tools and the zip method for increasing internal memory for installing color os rom. but it didn't work again.
the current status of my phone is that i am using stock rom which is rooted but all i wanted to ask is that did i mess up with my internal sd card which is actually not allowing me to install color os rom? or is it something else? because i did each and every step correctly each time.

amitm20 said:
i got back my imei fixed through a local store. i tried everything which didn't work at that moment. now i have my imei and i used mtk droid tools to take a backup this time and tried the whole process again. i used sp flash tools and the zip method for increasing internal memory for installing color os rom. but it didn't work again.
the current status of my phone is that i am using stock rom which is rooted but all i wanted to ask is that did i mess up with my internal sd card which is actually not allowing me to install color os rom? or is it something else? because i did each and every step correctly each time.
Click to expand...
Click to collapse
so wait.. your sd card is mounted right? install titanium backup and see the amount of memory in you partitions..

abhimanyu bajaj said:
so wait.. your sd card is mounted right? install titanium backup and see the amount of memory in you partitions..
Click to expand...
Click to collapse
ok bro see this attachment. it shows my internal memoery as 1.58gb and see what it shows on my pc.

amitm20 said:
ok bro see this attachment. it shows my internal memoery as 1.58gb and see what it shows on my pc.
Click to expand...
Click to collapse
aah.. i see your problem.. the internal memory referred to in titanium backup is the memory for your apps... the internal sd card one is the one which is showing on your pc...
Edit: in titanium backup... SD is your memory card which you inserted... Ext SD is actually internal SD ..its messed ub but you get the jist

abhimanyu bajaj said:
aah.. i see your problem.. the internal memory referred to in titanium backup is the memory for your apps... the internal sd card one is the one which is showing on your pc...
Edit: in titanium backup... SD is your memory card which you inserted... Ext SD is actually internal SD ..its messed ub but you get the jist
Click to expand...
Click to collapse
so what do you think is the exact problem? the storage space space showing on my pc used to more before i tried to increase it.
and do you think this has been the problem which is not allowing me to install color os rom? please help me bro i am tired with the stock rom. I wonder flashing custom roms in mmx a52 was much more easier lol

amitm20 said:
so what do you think is the exact problem? the storage space space showing on my pc used to more before i tried to increase it.
and do you think this has been the problem which is not allowing me to install color os rom? please help me bro i am tired with the stock rom. I wonder flashing custom roms in mmx a52 was much more easier lol
Click to expand...
Click to collapse
see.. what your computer labeled as internal SD .... titanium labeled as ext. sd okay? see. both have the same memory..
the sd in titanium backup is your sd card
the internal memory is the app memory...
try installing color os.... follow instructions..i should install.. otherwise ask the dev. in the rom forum

abhimanyu bajaj said:
see.. what your computer labeled as internal SD .... titanium labeled as ext. sd okay? see. both have the same memory..
the sd in titanium backup is your sd card
the internal memory is the app memory...
try installing color os.... follow instructions..i should install.. otherwise ask the dev. in the rom forum
Click to expand...
Click to collapse
i tried it just now.. but it's stuck to boot logo.waited for more than 10mins but it didn't boot.
and btw do you think i have enough partition size for color os rom? because i was reading the posts and it was mentioned that it takes 750mb after the installation

amitm20 said:
i tried it just now.. but it's stuck to boot logo.waited for more than 10mins but it didn't boot.
and btw do you think i have enough partition size for color os rom? because i was reading the posts and it was mentioned that it takes 750mb after the installation
Click to expand...
Click to collapse
use the cwm zip file to increase the partition.. just to confirm again.. then flash the rom...
did you flash the color os2 or the original one?
Edit: did you also flash the patch?

abhimanyu bajaj said:
use the cwm zip file to increase the partition.. just to confirm again.. then flash the rom...
did you flash the color os2 or the original one?
Edit: did you also flash the patch?
Click to expand...
Click to collapse
ok i'll try to use the zip file again and see if it works.
i tried to flash color os 1.2, when i got the bootloop i reverted back to my backup which is a rooted stock rom.

abhimanyu bajaj said:
use the cwm zip file to increase the partition.. just to confirm again.. then flash the rom...
did you flash the color os2 or the original one?
Edit: did you also flash the patch?
Click to expand...
Click to collapse
i tried to use the zip file but it didn't work either. i got the bootloop again. i was flashing color os 1.2 rom.
and i did not use the patch yet. actually i don't know how it works so didn't try. i have almost given up on this. i don't know why i am not able to do it.

amitm20 said:
i tried to use the zip file but it didn't work either. i got the bootloop again. i was flashing color os 1.2 rom.
and i did not use the patch yet. actually i don't know how it works so didn't try. i have almost given up on this. i don't know why i am not able to do it.
Click to expand...
Click to collapse
install rom and then install the patch right away...told you to follow instructions..
and wait.. you got a bootloop on flashing the partition file or the rom file?
alos which zip are you using? there are 2 (for the partition)

abhimanyu bajaj said:
install rom and then install the patch right away...told you to follow instructions..
and wait.. you got a bootloop on flashing the partition file or the rom file?
alos which zip are you using? there are 2 (for the partition)
Click to expand...
Click to collapse
I followed each step correctly..
i used 880mb partition file for that i did wipe data/factory reset>wipe cache>wipe system> wipe dalvik cache and then installed 880mb.zip
as memntioned in that thread i installed the rom zip directly after that and rebbot system. i was supposed to get the bootloop at first which i got and then i did wipe data/factory reset>wipe cache>wipe system> wipe dalvik cache again and installed rom again. but i am stuck in bootloop.
i was reading the reviews in color os thread and it was mentioned to unmount cache and sytem before flashing i did that too but no luck.
so please let me know if i did anything wrong because thiis is all i have been trying.

amitm20 said:
I followed each step correctly..
i used 880mb partition file for that i did wipe data/factory reset>wipe cache>wipe system> wipe dalvik cache and then installed 880mb.zip
as memntioned in that thread i installed the rom zip directly after that and rebbot system. i was supposed to get the bootloop at first which i got and then i did wipe data/factory reset>wipe cache>wipe system> wipe dalvik cache again and installed rom again. but i am stuck in bootloop.
i was reading the reviews in color os thread and it was mentioned to unmount cache and sytem before flashing i did that too but no luck.
so please let me know if i did anything wrong because thiis is all i have been trying.
Click to expand...
Click to collapse
after flashing rom .. did you flash the patch? maybe that's important.. also which color os are you using?

abhimanyu bajaj said:
after flashing rom .. did you flash the patch? maybe that's important.. also which color os are you using?
Click to expand...
Click to collapse
i am trying to install color os 1.2 rom bro. and i did not flash the patch as yet. do you think i should try that?

amitm20 said:
i am trying to install color os 1.2 rom bro. and i did not flash the patch as yet. do you think i should try that?
Click to expand...
Click to collapse
yes...if it doesnt help.. try and install the newest color os 2

abhimanyu bajaj said:
yes...if it doesnt help.. try and install the newest color os 2
Click to expand...
Click to collapse
ok bro I.ll try the patch file.. thanks for your help.

where does the content of internal sd card goes when it is used as partition..... thw
abhimanyu bajaj said:
see.. what your computer labeled as internal SD .... titanium labeled as ext. sd okay? see. both have the same memory..
the sd in titanium backup is your sd card
the internal memory is the app memory...
try installing color os.... follow instructions..i should install.. otherwise ask the dev. in the rom forum
Click to expand...
Click to collapse
....................

Figured out internal Sd card mount error clear solution.
Here's what i think you have done
You did a system partition with sptool and also tried zip like 507mb to 1gb or in between .
I had the same problem of lost internal sd card in file manager.
If you want it back or increase system partition try factory mode to format unmount error of internal sd card.
follow these steps.
1) take or keep a backup in sd card.
2) go into cwm recovery mode and flash 507mb partition zip or 1gb partition zip(507mb for undo partition and 1gb for partition)
3)To solve mount issue without external sd card go to factory mode after the flash.
select "Full test" option in it select memory it'll show 3 options
1 Format ext...
2 test pass
3 test fail
And it shows the space in yellow text in two sd card as 0 mb or any . Select the first option which will increase the space of internal sd.
After you'll just need to update or restore backup to successfully fix mount error for internal sd card either for partition or undo partition.
This worked for me when i just tried various format option to format the partition error.

Storage space running out after installing lineageOS.

After installing twrp i wiped my x509 by fastboot qnd then simply installed lineage. Now the issue is,on storage i see 29.5 gb used of 29.11 gb and a notification always showing "storage space running out". Can't even take screenshots. Please help!!!!!!
Sent from my Pixel XL using Tapatalk

deepjyoti30 said:
After installing twrp i wiped my x509 by fastboot qnd then simply installed lineage. Now the issue is,on storage i see 29.5 gb used of 29.11 gb and a notification always showing "storage space running out". Can't even take screenshots. Please help!!!!!!
Click to expand...
Click to collapse
Same here

Try wiping internal storage and data from TWRP.

Fastboot do't work as expected so either try with twrp or flash stock with sp flash tool then install LOS

I too have the same problem. I don't remember how I got myself into this problem but I remember that I was flashing a "custom rom" and my internal storage by default which is (without any files in the storage except the newly flashed rom) 32 gb which is in general is 29.12gb. Was decreased to 24 gb. And after reading many pages and bull**** I came to know that my phone has created an "virtual sd card" without my knowledge.
Failed solutions : I have tried everything. (when I say everything I mean it)
1.I have format my internal memory
2. Flashed an "stock rom" (no twrp) and again format my storage.
And none of the above worked out.
IF ANYONE OUT THERE KNOW SOMETHING AND WILLING TO HELP. DO REPLY.
PEACE OUT