I S-off'd my HTC Sensation using Revolutionary's S-Off & recovery tool. I also installed the Superuser app to give me 'root' although I simply cannot access the phone's internal memory. (only my 8GB SD card is recognized by W764bit).
I've tried everything I can think off, including: uninstalling/reinstalling the drivers, rebooting, enabling USB debugging, factory rest, renaming the ext-SD's drive from H to Z, enabling disk connection type, installing HTC Sync, mounting/demounting,
Bizarrely, when I physically remove the ext SD card Windows 7 displays a drive, although its unaccessable and PC connect goes into charge only mode with 'disk' option not available.
I did have trouble installing Superuser 3.0.7 and had to retry several times, also in the apps menu its icon is a green android appose to a grey andoid with cross bones. Does this mean my phone's not rooted?
I also noticed whilst backing up using the recoverythat it does find the ext SD. I'm in a bit a situation because I used Revolutionary so I could install ICS, and now it's available over OTA I can't install it because of the S-Off.
Would it be easier for me to reurn it to stock and just install over OTA?
I've tried everything I can think of and searched everywhere to resolve this issue so help much appreciated.
Cheers Ian
Internal memory isn't meant to be accessed.
No the green Android is the new icon, you should be rooted. To check download an app like Titanium and see if you can obtain root access.
Is your SD card formatted as an EXT partition?
Easiest way to get ICS from where you are is to follow this guide: http://forum.xda-developers.com/showthread.php?p=21989107
I assume you've already done SuperCID so backup your stuff and then move onto the part that says update firmware.
Do you mean you can't access the SD card from the phone? Or just from the computer?
If you can view the SD card contents from within the phone just fine, it could be that you formatted the SD card with a file structure that's incompatible with Windows.
Thanks for the reply K0mic... When I said memory I meant storage, or is this the came case?
If Revolutionary S-Off is a bootloader unclocker then use I've SuperCID (sorry complete noob), but yeah I got the beta key.
The SD card is FAT32 ATM which will el[plain why the backup doesn't recognize it What's the best way to format it to EXT? is it using 3rd party software or can it be done with Android?
I went to follow this guide:
w w w .androidauthority.c o m/sensation-install-ics-aokp-rom-63544
when installing ICS and 'step 4' is the problem I have; I simply cannot access the Sensation's Internal SD card :/ Windows only displays the phone's fitted 8GB microSD card :/
Skipjacks said:
Do you mean you can't access the SD card from the phone? Or just from the computer?
If you can view the SD card contents from within the phone just fine, it could be that you formatted the SD card with a file structure that's incompatible with Windows.
Click to expand...
Click to collapse
I can view the microSD fine with W7, but maybe that's because its Fat32. It's the internal SD card I can't access, or is it because that one has an EXT partition?
Cheers Ian
You cannot access your internal memory (it's not an internal sd card) from windows explorer. You'll need to use adb in order to obtain access to your internal memory through your pc...
android-dls.com/wiki/index.php?title=ADB
Ahh... that explains why then I take it the internal storage is where the HBoot and ROM resides?
I think I may has misinterpeted what ext SDcard means. (I thought it mean external, i.e. the microSD card you can access/remove. So, when a website's guide tells to to place a ROM's file in the internal SD and not the EXT SD they mean place the file on the FAT32 partion of the same physical micro SDcard that contains both FAT32 and EXT partitions correct?
And the true internal storage is where the ROM (GB/ICS) and Hboot is located along with all of the OS' system files? If this is the case I take it there's no real reason for the average person to want or need to access the device's internal storage unless allowing a tool like Revolutionary to write to it.
I hope I've explained myself enough, so do I have the right understanding now?
Cheers Ian
Infiltrator2K said:
Ahh... that explains why then I take it the internal storage is where the HBoot and ROM resides?
I think I may has misinterpeted what ext SDcard means.
Cheers Ian
Click to expand...
Click to collapse
You can see your SD card in windows 7 (PC) but not the internal memory. If you want to flash something in to your phone's internal memory (hboot, boot, system, recovery etc) through the PC, you can use adb command. Or you can flash the zip file thorough SD card with custom recovery.
If you want to change the android system file on phone, you can use root explore (you can find it on google play) or other apps.
gordonlu said:
You can see your SD card in windows 7 (PC) but not the internal memory. If you want to flash something in to your phone's internal memory (hboot, boot, system, recovery etc) through the PC, you can use adb command. Or you can flash the zip file thorough SD card with custom recovery.
If you want to change the android system file on phone, you can use root explore (you can find it on google play) or other apps.
Click to expand...
Click to collapse
So all I need to do to get ICS on my S-off Sensation is download the relevant ICS ROM to my micro SDcard and run it from recovery?
Also, is recovery not recognizing Ext SD because I've not created the partition yet? If so what is the EXT partition actually used for?
Cheers Ian
Infiltrator2K said:
So all I need to do to get ICS on my S-off Sensation is download the relevant ICS ROM to my micro SDcard and run it from recovery?
Also, is recovery not recognizing Ext SD because I've not created the partition yet? If so what is the EXT partition actually used for?
Cheers Ian
Click to expand...
Click to collapse
If you want to get custum ICS ROM, first, you need a s-off phone, then flash a custom recovery, then flash adequate firmware (hboot, radio) with custom recovery, then flash the custum rom. You can found detail guide and files in sensation Rom develope forum.
The sencond question, I don't know what kind of problems you met. When you enter recovery, you can choose install zip from SD card. Or you met another promblem?
I hope these answer can help you
Sent from my HTC Sensation XE with Beats Audio using XDA Premium HD app
I think I am kind of get what you problem is, as I read thru the site you give it seem have some mistake at no 4. Because you want see or never have access to internal memory of the phone. Just place the ROM on the SD card. as you see on step 9 you have to “wipe data/ factory reset” the phone. This procedure will definetly remove/delete the rom if you place in internal memory. The Clock Work Recovery also don't have function to install ROM from internal memory. I think maybe some miss typo on the site.
Another things is if you are now on stock Gingerbread not custom ROM you'll be get the FOTA update. Since S-OFF and rooting don't bother the update file, but you have to change to Default or original Recovery because you will get hang on htc white screen after reboot. Maybe the FOTA just not been role up on your country/carrier or unknown reason.
*sorry for my bad english
gordonlu said:
If you want to get custum ICS ROM, first, you need a s-off phone, then flash a custom recovery, then flash adequate firmware (hboot, radio) with custom recovery, then flash the custum rom. You can found detail guide and files in sensation Rom develope forum.
The sencond question, I don't know what kind of problems you met. When you enter recovery, you can choose install zip from SD card. Or you met another promblem?
I hope these answer can help you
Click to expand...
Click to collapse
XaQi nailed it... it was a typo on the websites behalf that threw me. Many thanks with your help though and for explaining things, it's much appreciated
XaQi 101 said:
I think I am kind of get what you problem is, as I read thru the site you give it seem have some mistake at no 4. Because you want see or never have access to internal memory of the phone. Just place the ROM on the SD card. as you see on step 9 you have to “wipe data/ factory reset” the phone. This procedure will definetly remove/delete the rom if you place in internal memory. The Clock Work Recovery also don't have function to install ROM from internal memory. I think maybe some miss typo on the site.
Another things is if you are now on stock Gingerbread not custom ROM you'll be get the FOTA update. Since S-OFF and rooting don't bother the update file, but you have to change to Default or original Recovery because you will get hang on htc white screen after reboot. Maybe the FOTA just not been role up on your country/carrier or unknown reason.
*sorry for my bad english
Click to expand...
Click to collapse
I am running what I believe stock Gingerbread, but I used Revolutionary Tool to aquire S-off and installed Clock Work Recovery. I installed Superuser for root, although I believe this to be just a normal app and nothing to do with the Hboot process.
I used the Revolutionary tool so I could manually install ICS as at the time it wasn't available OTA, although it became available yesterday, but now I've tinkered around with the Revolutionary tool it won't install, only hanging with the red exclamation mark.
That typo you so rightly pointed out to me cost me a lot of time wasting. I spend hours trying to resolve what I thought was an issue Muppets who wrote those instructions!
How can I install ICS OTA now? Either way I can't install atm as things are.
Cheers Ian
Always check the software update on settings.
If you can find a link to download the compatible FOTA file or RUU you may go with it. But remember to install Stock Recovery before OTA I use this guide to get back to Stock Recovery it may help you to. [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
Other's option is install custom ROM go to Sensation Android Development, there are many great custom ROM you may find one that suite you. Just follow the instruction carefully.
If you want something similar to OTA you may want to try this [ROM] HTC Sensation *STOCK* ROMs | 3.32.401.x | Ice Cream Sandwich | HTC Sense 3.6 but I recommended [ROM] Android Revolution HD 6.6.0 | ICS | High Quality & Performance | 3.32.401.105 for many support and guide.
Sweet
XaQi 101 said:
Always check the software update on settings.
If you can find a link to download the compatible FOTA file or RUU you may go with it. But remember to install Stock Recovery before OTA I use this guide to get back to Stock Recovery it may help you to. [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
Other's option is install custom ROM go to Sensation Android Development, there are many great custom ROM you may find one that suite you. Just follow the instruction carefully.
If you want something similar to OTA you may want to try this [ROM] HTC Sensation *STOCK* ROMs | 3.32.401.x | Ice Cream Sandwich | HTC Sense 3.6 but I recommended [ROM] Android Revolution HD 6.6.0 | ICS | High Quality & Performance | 3.32.401.105 for many support and guide.
Click to expand...
Click to collapse
Top man I found a link on how to remove Revolutionary and return the phone to stock although I don't see the point if I can install tweaked ROMs like that I take it I can install the ROMs with S-off and rooted?
You can install OTA updates, or custom ROMs with s-off and root. The catch is that you'll need to change between recoveries to do so...
OTA updates = stock recovery
Custom ROMs = CWM or EXT4 recoveries
Follow the link provided two posts up, or let me know if you want a PG58IMG.zip I made for the stock recovery. I made another for CWM touch but I won't share warez.
Also, if you're going to flash a custom ICS rom you'll need to update your firmware first to one of the 3.32 releases...
Related
hi all, i have a rooted htc aria running froyo 2.2.ive got a new 16g card coming. i would like to partition. ive read way too much info on doing this, that im now totally confused! i cant figure out what steps this should be done in. ive got everything backed up. im not sure what program to use for the partitioning. have read not to use rom manager. im not sure about how many partitions i should have. after i copy my card contents to pc, where do they go when i copy them back? i just really need someone kind enough to walk me thru this. i have adhd and need specific instructions......thanx
chowceal said:
hi all, i have a rooted htc aria running froyo 2.2.ive got a new 16g card coming. i would like to partition. ive read way too much info on doing this, that im now totally confused! i cant figure out what steps this should be done in. ive got everything backed up. im not sure what program to use for the partitioning. have read not to use rom manager. im not sure about how many partitions i should have. after i copy my card contents to pc, where do they go when i copy them back? i just really need someone kind enough to walk me thru this. i have adhd and need specific instructions......thanx
Click to expand...
Click to collapse
Why do you need to partition buddy? Do you want multiple internal storages, or another reason? I may be able to help here with just a little more info.
i would like to partition the micro card.ive read that its better to have it partitioned?
chowceal said:
i would like to partition the micro card.ive read that its better to have it partitioned?
Click to expand...
Click to collapse
In some cases, putting a separate partition on your SD card and formatting to etx3 can be beneficial, especially with the Galaxy S devices. In day-to-day use with others phones though, you'll benefit far more from the extra storage than having multiple partitions. Do you have a Galaxy S mate?
i have a htc aria.
chowceal said:
i have a htc aria.
Click to expand...
Click to collapse
I found this for you, from the Aria forum:
To Enable A2SD:
Backup your applications
Backup your sdcard
Partition your sdcard with ROM Manager with an ext partition option. (ROM manager is in Market)
This should start a special mode of clockwork recovery, which will partition the sdcard.
That's the only reason you'd want to partition your card, so that if you're running out of memory you can move some of your apps to the SD card. ROM Manager is very easy to use, but I'll be here if you need me Good luck!
juzz86 said:
I found this for you, from the Aria forum:
To Enable A2SD:
Backup your applications
Backup your sdcard
Partition your sdcard with ROM Manager with an ext partition option. (ROM manager is in Market)
This should start a special mode of clockwork recovery, which will partition the sdcard.
That's the only reason you'd want to partition your card, so that if you're running out of memory you can move some of your apps to the SD card. ROM Manager is very easy to use, but I'll be here if you need me Good luck!
Click to expand...
Click to collapse
To follow onto this question. 1st time droid user, limited linux knowledge. I am running 2.2 on a brand new optimus t(mobile). I plan on rooting using z4root and flashing ROM (maybe megatron). Sdcard new (unused) only thing I have done with the phone is install a bunch of apps (which I can replace) and load my contact/gmail account.
I notice that my phone indicates 143kb internal available, so I assume I will have space limitations soon. It is my understanding that one of the benefits or rooting and putting on custom rom is the ability to have your phone recognize portions of the sd card as internal memory and, thus, "create" more internal space.
Considering my phone and my desire, can I go through the process of 1) rooting (z4root) 2) backup (custom recovery) 3) flash new rom/kernal 4) dump back up from sdcard onto PC via card reader 5) Use your above method to partition card?
Any suggestions/advice would be greatly appreciated, including partition types/sizes, process, procedure....or just tell me if I am an idiot and am way off base.
Thanks a lot
I got a new LG P999 (I think that's the G2X). I'm new to Android but I'm not sure if I should root/mod or not.
Is there really any significant benefits from modding (like speed or stability) or it's just to make your Android flashier?
Also, what mod would be best to go for? And if someone could link me to a beginner tutorial on how to mod (with simpler terminology; I only found some with terminology like NANDroid, clockwork recovery, etc... which I don't really understand), that would be much appreciated.
Hope someone can help, thanks!
kefloxin said:
I got a new LG P999 (I think that's the G2X). I'm new to Android but I'm not sure if I should root/mod or not.
Is there really any significant benefits from modding (like speed or stability) or it's just to make your Android flashier?
Also, what mod would be best to go for? And if someone could link me to a beginner tutorial on how to mod (with simpler terminology; I only found some with terminology like NANDroid, clockwork recovery, etc... which I don't really understand), that would be much appreciated.
Hope someone can help, thanks!
Click to expand...
Click to collapse
Well, rooting/modding gives you every benefit out there. Battery life, speed, options, features, the list goes on. Flashing ROM's is basically 99% the reason why people root or install a custom recovery on their phones. NANdroid, Clockwork MOD, etc are basically the basis and the stuff that you need to know about rooting. Since you're new I suggest you read a lot first and get to know what those terminologies are. ClockWork is a custom recovery that enables you to flash a custom ROM onto your phone.
Here is the G2x Bible. That's a reference guide to most, if not everything, that you need to know.
Here is the NVFlash method that you need to do to install Clockwork onto your G2x. You don't really need root for the G2x, just install Clockwork via that guide and you'll be good to go.
Remember: Read, read, and read.
Thanks for your reply! Those links helped me a lot. A few questions though:
1) If I don't have an external SD card, will I be able to put an external SD card without problems later? And can I re-flash for the external SD card support if desired?
2) Once I'm in the ClockworkMod Recovery, how do I put the ROM on my phone? (Flash is the correct terminology if I'm not mistaken).
3) Which ROM or mod should I go with? From the looks of it, a lot of people use CyanogenMod, but is there one that's most stable/fast?
Thanks again for your answer.
Here's another guide on NVFlashing.
These are my 3 favorite ROM's. And I'm sure most of the G2x people would agree as well.
Eagle's Blood: Based on LG's stock 2.3.3 Gingerbread.
Weapon G2x: Again, based on LG's stock 2.3.3 Gingerbread, but with Whitehawx's many tweaks and features.
And of course, CyanogenMOD 7 Nightlies: It's based on Google's AOSP, but the CM team has added in hundreds of tweaks that makes the user experience the best you can ever get on Android.
My favorite is CM but I suggest you try all 3 to see which one you like the best.
Yes, you can slip in an SD card after you've flashed if you want. Just follow the instructions carefully on how to NVFlash, there's even a YouTube video on how to do it.
Once you're in CWM, I suggest you do a NANDroid backup to backup your current ROM. Then do the following steps.
1. Wipe Data
2. Wipe Cache
3. Wipe Dalvik Cache (within Advanced)
4. Then go into mounts and format your /system
5. Then proceed to flashing your desired ROM.
Here's a quick video on how to flash a ROM.
But note; that video is how to flash a ROM on a myTouch 4G, just ignore the ROM's I showed in that video as it's for the MT4G. But the Clockwork MOD that you see there is just like the one for the G2x, except now the letters are blue. Do as I did in that video by wiping everything. Only thing I left out is formating /system since it wasn't needed on the MT4G. So don't forget to do that on your G2x.
Also, do you have Froyo or Gingerbread right now?
If you need any help with your g2x just drop me an email at [email protected]. I will be happy to help with any questions you may have.
Sent from the fastest g2x in the world
Thanks again for your awesome reply mackster248.
To answer your question, I'm currently running Froyo and I'm not actually with T-Mobile. I'm in Quebec with Videotron but I read it's the same phone. The phone model I have is LG P999DW.
I think I'll go with CM V7.1.0.1 as my first ROM (the nightlies may not be as stable as I want them to be). Do you think that would be an okay ROM as a first?
So just to confirm, this is what I will be doing as a whole process:
First, I will follow the NVFlashing guide which will allow me to use ClockworkMod Recovery. Next, I'll do a backup with NANDroid (which I assume is an option in CWM). Following that, I follow the wiping steps you listed (same as your video). Is that correct or am I missing something?
Thanks again!
EDIT: So I followed the NVFlash steps and it worked fine until I tried to boot in Recover by holding Vol Down + Power, but it doesn't seem to do anything... I can boot up the phone fine normally by holding the power button though. Is there a reason booting into recovery wouldn't work?
EDIT 2: Ah, nevermind. It works after I took out the battery and tried again.
EDIT 3: I haven't wiped my data yet in the recovery, but it seems I need an SD card so I can load the zip of the ROM I want. Is there a way to load the ROM from my computer or will I need to get an SD card first? Also, I would like to know if I should root as well? Does it make a difference? If not, why do people root before flashing?
Do you mind making a video of all the steps you did in exact order? also people root because most phones just use ROM manager to flash clockworkmod right from ROM Manger, but we are using NVFlash so we dont technically need it. Also new to the G2x, from (wind Mobile, i believe its the same one as the videotron P999-DW)
but im so scared to flash lol i had a vibrant i9000-m die on me before :3
Well, I can't make a video of what I did since I don't have a spare camera. All I did up until now is follow the NVFlashing guide to get ClockworkMod Recovery. It's not very hard to do actually.
I'm apparently supposed to wipe data, etc. now but I don't want to do that because steps later say that I need to flash from the SD card which I don't have. So I need to know now whether I need an SD card to flash a ROM on the phone? I've ordered an SD card which might take a while to get but after I get it, I also would like to know whether I need to root to flash? (since ROM manager says I need to root to use it, maybe I need to root to flash a ROM via CWM as well?)
I downloaded ROM manager and it says I need to root my phone for it to function. I also tried "Flash ClockworkMod Recovery" via the ROM manager which gives me an error as well.
So if someone could let me know whether 1) I can flash without an SD card and 2) whether I need to root to flash via CWM, that would be much appreciated. Thanks!
The newest version of CWM Recovery requires a physical SD to put the rom backups on. Go get yourself one. The smaller capacities are very inexpensive now, but it is nice to have a larger one if you can afford it. Each backup is very large, so a small card would run out of space quickly if you don't offload them to your computer or another storage medium. If you want to backup to the internal sd then install the older version (4.0.1.5) of CWM that support internal sd only, then you don't need a physical sd card. That is why TGA_Gunnman put that version back into his flasher.
With the latest CWM and a g2x and NO sd card, I was able to root, and flash roms. Just select the flash zip from internal SD option in CWM. I did not backup though.
hesher said:
With the latest CWM and a g2x and NO sd card, I was able to root, and flash roms. Just select the flash zip from internal SD option in CWM. I did not backup though.
Click to expand...
Click to collapse
Wouldn't the flash zip be deleted after you wipe the data, etc.?
Also, do I need to root for flash via CWM to work?
No just place it in the root.
kefloxin said:
Wouldn't the flash zip be deleted after you wipe the data, etc.?
Also, do I need to root for flash via CWM to work?
Click to expand...
Click to collapse
So you're saying that if I place the ROM on the root of the phone, it won't be deleted once I wipe data, wipe cache, wipe dalvik cache and format my /system?
I would just like to make sure as I don't want to be stuck without a phone until I get an SD card and no backup.
Thanks
kefloxin said:
So you're saying that if I place the ROM on the root of the phone, it won't be deleted once I wipe data, wipe cache, wipe dalvik cache and format my /system?
I would just like to make sure as I don't want to be stuck without a phone until I get an SD card and no backup.
Thanks
Click to expand...
Click to collapse
If you were factory resetting a Samsung the internal SD is also wiped; but thankfully, LG does not do that. When you do a factory reset on the P999 all it does is wipe the data and cache partitions. The internal sd is left alone. So yes you can place the zip package on the internal sd, reset and then flash it. It also doesn't have to be on the root. In CWM if you select install zip from sd card, you can then choose external or internal sd and navigate to any folder and zip file you want to flash. Have fun!
I was able to install the old CWM with internal SD card support and I used that to make a backup and flash the ROM successfully. Everything seems to be awesome so far except that I can't use USB mass storage from the O/S. I turn on USB mass storage and my computer doesn't detect it. The only way to make it work is going to CWM and mounting the USB. Anyone know how I would be able to make it work through the O/S again?
I also can't install Swype without an external SD card, but I'll have one soon so that's not a big worry.
Aside from those things, I think it's pretty cool.
Thanks to everyone who helped.
Have fun bud. No phone is perfect, but the G2x is pretty awesome.
Powered by a G2x
Yeah, it's awesome. But anyone know why USB mass storage doesn't show the removable drive on my computer? I have to go into CWM and mount it to make it work, but I would prefer to be able to do it via the O/S.
Thanks for all your help though guys, you guys are awesome
kefloxin said:
Yeah, it's awesome. But anyone know why USB mass storage doesn't show the removable drive on my computer? I have to go into CWM and mount it to make it work, but I would prefer to be able to do it via the O/S.
Thanks for all your help though guys, you guys are awesome
Click to expand...
Click to collapse
Install the LG Gingerbread drivers. Let me find a link.
Edit: I had the same problem as you, but this fixed that.
http://www.lg-phones.org/t-mobile-g2x-usb-driver.html
Powered by a G2x
It doesn't seem to work. I installed the drivers via the download link in the link you provided. Didn't work, then I tried to update following the instructions using the LG mobile support tool, and it still doesn't work either. (I've tried on 2 computers btw.)
I'm not sure why it only works via CWM, any other suggestions?
kefloxin said:
It doesn't seem to work. I installed the drivers via the download link in the link you provided. Didn't work, then I tried to update following the instructions using the LG mobile support tool, and it still doesn't work either. (I've tried on 2 computers btw.)
I'm not sure why it only works via CWM, any other suggestions?
Click to expand...
Click to collapse
Could be USB connection type is set wrong internally. See if there is some setting in CM7 for it. On a stock rom you can go into LG Hidden menu and set USB to automatic.
I saw in multiple threads saying to take out the sd card and go to restore and put it back in then delete the PG58IMG file but I did that and my phone is still in a boot loop does anybody know how to fix this ?
Shivam555 said:
I saw in multiple threads saying to take out the sd card and go to restore and put it back in then delete the PG58IMG file but I did that and my phone is still in a boot loop does anybody know how to fix this ?
Click to expand...
Click to collapse
Install a ROM based on the new firmware, the old one won't boot unless you reflash old firmware.
I recommend reflashing the old firmware getting messages, contacts, etc onto your memory card.
Then flash 3.32 firmware. Then format all partitions except SD Card from recovery. Then install your ROM.
Im sorry im brand new to all of this I just rooted my phone fine and then I tried doing something and it messed up can you give a step by step on what to do and with details it would be really helpful. Thanks !
To install a new rom based on the 3.32 firmware you download the rom to your computer plug in your device after It's downloaded, your device needs to be debugging on in settings, you will then check run as disk drive instead of charge option, then click on file sharing , go to downloads, share with disk drive e the removable disk drive which is your device.this will copy the rom to the root of your sd card. Unplug. Then go into recovery, wipe data factory reset, wipe cash, wipe dalvick cash, stay in recovery when finished, then install zip from sd card, stay in recovery, reboot. Then you have installed your rom. You want to make sure the firmware matches the rom. Ics Roms or 4.0.3, are 3.32 firmware gb Roms are different firmware. Hope this helps. You have 3.32 firmware so use a Ics rom. (4.0.3). This is how I flash mine. Good luck and hope I helped.
Sent from my HTC Sensation 4G using xda premium
realsis said:
To install a new rom based on the 3.32 firmware you download the rom to your computer plug in your device after It's downloaded, your device needs to be debugging on in settings, you will then check run as disk drive instead of charge option, then click on file sharing , go to downloads, share with disk drive e the removable disk drive which is your device.this will copy the rom to the root of your sd card. Unplug. Then go into recovery, wipe data factory reset, wipe cash, wipe dalvick cash, stay in recovery when finished, then install zip from sd card, stay in recovery, reboot. Then you have installed your rom. You want to make sure the firmware matches the rom. Ics Roms or 4.0.3, are 3.32 firmware gb Roms are different firmware. Hope this helps. You have 3.32 firmware so use a Ics rom. (4.0.3). This is how I flash mine. Good luck and hope I helped.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
He can't boot to Android.
Shivam555 said:
Im sorry im brand new to all of this I just rooted my phone fine and then I tried doing something and it messed up can you give a step by step on what to do and with details it would be really helpful. Thanks !
Click to expand...
Click to collapse
Steps 1 (method 2) & 4 from here.
The file required for 4: http://www64.zippyshare.com/v/66813266/file.html
Now, once done, pull out the battery from the phone. Remove the SD Card. Reinsert the battery.
Boot to bootloader by holding Volume down & Power button.
Next, select Recovery option. It will take some time to boot without the SD Card.
You will then see a menu. Don't switch off the phone but just insert the SD Card.
Select mounts|storage > mount /sdcard
Go back to the previous menu.
Select Toggle USB Storage.
Your SD Card can now be accessed from the computer. Delete the PG58IMG.zip from SD Card
Copy the ROM of your choice & put it on the SD Card.
Once done, select Disconnect (on the phone)
Select wipe|format >Format all partitions except SD Card.
Once done, go back.
Select Install zip from SD Card. Select your ROM zip file & install.
Once done, reboot.
How would I install 4EXT without booting into Android ?
Shivam555 said:
How would I install 4EXT without booting into Android ?
Click to expand...
Click to collapse
Did you bother to read the guide?
Connect USB in bootloader (fastboot USB), fastboot flash recovery recovery.img, fastboot reboot-bootloader
I'm not going to answer any more questions.
Whatever you need has already been linked to you.
Thank you so much, do you have any tips on what I should do next ?
Hi, i have a clone of GS, and i have 3 storage:
-The phone (system file)
-Internal storage (app but just 2gb)
-SD Card
But, i can't move or install app, game on the sd card, i can just on phone and internal storage. My phone is root, how can i amke ?
thanks.
What is a "GS"?
If the "GS" is Android, you can try this way:
Settings | Applications | Manage applications | Downloaded | Move to SD Card
ze7zez said:
What is a "GS"?
If the "GS" is Android, you can try this way:
Settings | Applications | Manage applications | Downloaded | Move to SD Card
Click to expand...
Click to collapse
gs is galaxy s 3, don't work for me, anyone have guide ?
flavien317 said:
gs is galaxy s 3, don't work for me, anyone have guide ?
Click to expand...
Click to collapse
Try apps2sd app from market
Sent from my HTC One X using xda app-developers app
vivek_bhoj said:
Try apps2sd app from market
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
ok, i have try many app on market, but i know don't work or im noob. but i have find i can change system file for reverse the sd card (8g) and internal stockage (2g) ? how can i make ?
You can't do many with internal storage unless you root your phone. What i know about internal storage is cannot be partitioned.
sent from htc evo 4g sprint supersonic with energy rom
How to install apps on SD
I did it many time and I think that to fully install apps on SD you need to know its steps:
1. Root phone.
2. Partition your SD card
3. Install app that help move all data app on SD, such as Link2SD, S2E, ...
all that stuff u can find on Google or just in xda forum. they talk 'bout that every day
But I think maybe U did it all but still got unsuccessful. I think 2GB internal storage is big enough to install app and U don't need to try anymore. Just choose what app to keep and what not to keep for your phone. GS III is a smart expensive phone, Is your matter deserve to try? I just have 180MB internal storage (Mini) and do a lot of stuff just to get more 500MB, but I lost 1 SD-Card dear
if you have a locked phone(not rooted) its up to every applications security settings if you can move it to sd or not.
This setting is deprecated on Google Play and new apps will have licensing service , but for now its up to developer choice.
thx all, i have find, i cgange a file sytem vlag if i think and work.
My sd card isnt detected
I was flashed and running with s-off. I was using 4K atom azul for the evo 4g. I wanted to be able to use my FFC but i couldnt figure it out with that rom. and then i decided to upgraded to the one that look like black beans but is made by team dirt. hated the fact i couldnt use my camera so i reverted back. after reverting back i got the 5 vibrations thing and black screen. Now i have my s-on and did the ruu. after several failed attempts my phone suddenly booted back to the 4k atom azul. i was stoked that i knew how to get it back but now i have no way of using the wifi or bluetooth, and plus my sd card is not found by any program says i have it mounted and when i go to settings to unmount it says to insert a sdcard. i have my 32 gb sd card in there. I dont know why my phone is no longer rooted. and i am scared to pull the battery out and try anything because of the simple fact i might not have a phone for another couple days and i about drove myself crazy not having a phone.
a little info:
I had s-off and idk what else... other than using amon ra for recovery image and formatting and reset factory data before installing another rom. it became an addiction to get another rom every week. and now i am stuck in the situation described above.
I have been doing the reboot over and over the past couple days before i got the 5 vibrations fixed back to normal, that the information below is what i remember from trying to recover...
supersonic evt3 ship s-on
hboot-2.10.0001
microp-041f
touch panel-amtel224_16ab
radio-2.15.00.11.19
oct 15 2010, 12:07:00
This above might not be exactly right.
I used a PC36IMG.zip file that i had after reformatting my sd card. it would not run the PC36IMG.zip file that i put on the root and recover my system so i had to do the ruu thing...
It would read something like this below...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
and it would successfully read the PC36IMG.zip but would not restore and a little scroll bar as it read the file would come up... i used fastboot usb and miraculously i have my 4K atom that i tried to reflash on my evo before it messed up.
I know that i still have s-on but it puzzles me how i have the s-on and running a rooted rom. my hotspot works and so does the GPS and navigation, i just can not connect to my wifi, or boot back into recovery without getting the black screen and 5 vibes of diagnostic so i am kinda stuck. My phone will send text and call out and let me download apps for what little internal memory i have on it; I hate i dont have an sd card to save pictures too, or and sd card to put music on to play in the car...
Thank everyone for your time, I just joined today but I have been a flashing freak for the last year or so once i figured out how to do it. I used unrevoked as my flashing software. If anyone can help it would be greatly appreciated. Thanks
Usually my phone gives me the option to move recently downloaded or updated apps to the sd card...
(Now, I know this is not in the right section or even in the device's page, but...)
Forewarning: I am NOT responsible for any damages caused by running this tool. (You ran it, not me.) Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Pio_masaki and I have been working hard for almost a year to get root on the ICS version of the Toshiba Thrive 10.
Last night, I was able to finally sneak past sealime.ko and have it work.
It uses the "root any ICS device" tool, with special modifications specifically for the Thrive 10.
(can't post any links, so it's on the "thrive-hackers" github page.)
Special note: While it is set up for OSX ADB, I have not been able to find any binaries.
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
rohads said:
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
Click to expand...
Click to collapse
Saying there is a method to root it now, yes, we got around sealime.ko. This means we can flash the HC bootloader which is unlocked, which allows custom recovery and kernels/ramdisks (boot.img) to be used.
BTW the link is https://github.com/Thrive-Hackers
congrats guys ! very awesome work !
jdsingles deodexed ROM w/ agat63's 1.3 kernel Suped up w/ CB 6.26.13
More specifically, it bypasses sealime to flash the unlocked bootloader. What we did was we MVd /dev/block/mmcblk0p6 to 0p9. It's a pure fluke Pio and I found out that it works. We found out that sealime was explicitly blocking write to 0p6, so he semi-sarcastically said to move it. I ran the mv command, whadda ya know? It worked!
'Course, getting the tool completed wasn't as simple as that...
PS: Could we get this moved to the Toshiba Thrive Development section?
Have instructions been written for the process?
worked for me
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
navyguy said:
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
Click to expand...
Click to collapse
Try fastboot flash:raw.
Is there any need to do a backup before rooting?
TubaMeister said:
Is there any need to do a backup before rooting?
Click to expand...
Click to collapse
Not explicitly, but it wouln't hurt in case your tablet got into contact with allspark.... er, the bootloader didn't flash, and you're stuck in a bootloop.
easy root and CWM recovery
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Uh oh
robyn402 said:
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Click to expand...
Click to collapse
I installed the drivers, used the root tool, the restore was successful, but now the tablet is stuck in a boot-loop mode.
The root tool was running, there was a line that said the screen would go blank, which it did, and it stayed there for several hours. When I came back to check on it, the tablet was off, so I turned it on. That's when I found the boot loop. It'll get to the home page, tell me that nova launcher has stopped, then loop back to the moving stars section of the boot screen.
Any ideas on what to do now?
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Kyonex said:
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Click to expand...
Click to collapse
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
DLeach4512 said:
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
Click to expand...
Click to collapse
also make sure you open the zip and place the update.zip on your card -
From my GSIII - jd's Stock/Rooted/Deodexed 4.3
Kyonex said:
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
Click to expand...
Click to collapse
Excellent!
1) I had to extract "update.zip" from the ROM I had downloaded.
2) I re-formatted the card I was using to FAT32 instead of FAT.
3) I was able to get the install started with no trouble after following your directions.
BIG THANK YOU FOR THAT!
I got a successful install message, and then it booted!
Thanks a million!
Problems after Mount Changes
I changed the mount as described on thriveforums.org to allow apks and data to go to the external sd rather than "shared" internal memory.
I now have the situation with less free memory available on the sd card than on internal. The CWM backups went on the physical card- a 32 G one almost full. Will look for a major mfr 64 Gig.
One or so issues with the revised mounts where the external sd card is now internal. They relate to making backups with dalepl's latest CWM 6.0.1: where to put CWM backups for now and are they being made correctly with the revised mounts?
The backup made prior to the mount change looks normal: a single, dated/numbered folder about 2.6 Gb, 6 files: boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img and system.ext4.tar. However, the one made after the mount change also has a dated, numbered folder of only 15.8 Mb and 7 files: .android_secure.vfat.dup, boot.img, cache.ext4.dup, data.ext4.dup, nandroid.md5, recovery.img and system.ext4.dup. There is a second folder associated with the later bu called "blobs", which is huge --2.76 Gb, 3292 folders and 6581 files. Is this an expected result and any one think it might be a valid bu?
Also, it went on to the external SD (now "internal") and total storage use is now almost 28 Gb out of 30.2. I now have the situation with less free memory available on the sd card than on internal. The stuff there looks ok, pix movies and music plus CWM bups of 5.5 G and App_Backup_Restore archived apks at 2.8 Gb. So, I copied the cwm backups folder to the real internal memory, now sdcard2. I assume this true internal memory might get wiped during a restore so, this is not a valid storage site for this? And, if I put copies on a spare card, will that really work if my downloaded apps are on the original card, eg does the CWM backup copy the external card apps?
As I note, for some reason this 'blobs' folder won't copy easily to a USB via the Thrive or Win 7 pc. It also won't copy to a Win 7 HD partition where I store my Thrive stuff. (Update: I was able to do a wireless transfer to my pc and then, from there, to a spare SD card.)
Any thoughts? Should I go back and change the mounts to default?
BTW, I find FolderMount has no real use with the changed mount on the Thrive unless someone tells me otherwise. With the Thrive mounting the external card as internal, files go to the physical card.
gberpa,
I don't understand your question - it is very long. But I know that custom recovery (CWM / TWRP) itself remounts sdcard and internal memory before wipe process so it will wipe correct memory (only internal memory). If you need to change the ROM you don't need to worry about mounting paths because after wipe mounting paths will be restored to original.
Partition layout of Toshiba Thrive 10.1" ICS
AmEv said:
Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Click to expand...
Click to collapse
Can you give us information on the Toshiba Thrive 10.1" ICS partition layout and their names, please?
We would like to compare it to ours Toshiba Excite Pro (AT10LE-A, tostab12BA). A Dirty Cow enabled KingoRoot has given us a temporary root.
[Q] How Root Toshiba Excite Pro AT10LE-A-108 by dexxxZ
https://forum.xda-developers.com/showthread.php?t=2583677&page=6
Sent from my takee 1 using XDA Labs