Flashed CM 10.1 Nightly - Sim Issues - AT&T Samsung Galaxy S II Skyrocket SGH-I727

Here's what I did:
From ATT stock gingerbread, I installed touch custom recovery via hiemdall, then from the custom recovery I flashed the CM 10.1 nightly zip and the jelly bean google apps.
Phone boots up fine but immediately after booting it says sim card inserted, restart to begin using... I can cancel the message and the phone will work fine except every minute or so the cell signal is lost and 15 seconds later I get the "sim card inserted message" again.
This problem does not occur on stock. I'm currently thinking the gingerbread radio isn't working well with the 4.2 rom.
I tried flashing a few radios but each one I try to flash in CWM say FAILED.
Thoughts?

Use ucmc1 radio. It's required on cm 10.1.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
Use ucmc1 radio. It's required on cm 10.1.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I just flashed the usmc1 radio successfully. I originally was trying to work with the UCLi3 ICS radio as directed by the team chopsticks website.
At the moment it seems to be working properly. It still gives me the "sim card inserted" message upon initial bootup and I've restarted a few times.
The signal is staying strong and consistent and it hasn't given me the message repeatedly like it did before though so this may be a success.
Any idea why it'd continue giving that message on initial startup? Cheers :good:

Idk, I haven't seen that issue
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

mistarose said:
Phone boots up fine but immediately after booting it says sim card inserted, restart to begin using... I can cancel the message and the phone will work fine except every minute or so the cell signal is lost and 15 seconds later I get the "sim card inserted message" again.
Click to expand...
Click to collapse
Your problem sounds similar to one I was having a while back. Mine would just fail to recognize a SIM. You can see my thread on the matter and the steps I took to troubleshoot it (ultimately the device was dead). I would recommend getting a new SIM from AT&T (or whichever provider you have) first and foremost.

mistarose said:
I just flashed the usmc1 radio successfully. I originally was trying to work with the UCLi3 ICS radio as directed by the team chopsticks website.
At the moment it seems to be working properly. It still gives me the "sim card inserted" message upon initial bootup and I've restarted a few times.
The signal is staying strong and consistent and it hasn't given me the message repeatedly like it did before though so this may be a success.
Any idea why it'd continue giving that message on initial startup? Cheers :good:
Click to expand...
Click to collapse
It gives me that too sometimes on different roms, i guess it's totally normal and that the OS boots faster than the cellular services are initialised.

lingowistico said:
It gives me that too sometimes on different roms, i guess it's totally normal and that the OS boots faster than the cellular services are initialised.
Click to expand...
Click to collapse
That is what seems to be happening. The initial boot after a factory reset I didn't get the reset which may be partly due to the initial boot taking longer than successive ones. At any rate, I'm still getting the message on each startup which isn't a deal breaker. Glad to see I'm not the only one.
Many thanks jd1639 for providing a solution to get the phone working well!

mistarose said:
That is what seems to be happening. The initial boot after a factory reset I didn't get the reset which may be partly due to the initial boot taking longer than successive ones. At any rate, I'm still getting the message on each startup which isn't a deal breaker. Glad to see I'm not the only one.
Many thanks jd1639 for providing a solution to get the phone working well!
Click to expand...
Click to collapse
also, the Rogers jelly bean radio uxuma7 gives you an option to switch modes LTE/HSPA/GSM in different combinations.
i'd recommend it over ucmc1. i have LTE turned off by default, and save alot of battery from that, because this phone doesn't support the frequencies we have here.

Related

htc sensation wifi error

yes I have tried almost everything, like flashing custom roms or stock ruu almost everyday with different variations. flashing kernels, tweeks, so on and so on.
It works somehow and it disconnect itself after a while or totally stucks in "wireless is turning on". After it get online it makes couple of reboots and it gives "wireless is turning on" error again. I can use the phone for days but wireless never gets on.
The funny point is when wireless on and screen is locked and screen is off. When I attempt to click screen lock button, sometimes it never gives light but I can see that The screen is on and I can move the ring and do whatever i want but it is very hard to see actually. I have to put on light on to see the pictures but it doesnt happen when wifi is off or gives error.
and another funny point is I can swipe down upper bar when screen is locked. I can do bypass.
What the hell is going on my phone? no idea really
lol, i don't know a solution for the screen/wifi issue. but lockscreen pulldown status bar is a new feature of ICS, not a bypass
to make it easier to access your notifications
we have the same issue i even downgrade to GB but still the same problem did have the wifi issue when you did OTA ?
lenetfm said:
we have the same issue i even downgrade to GB but still the same problem did have the wifi issue when you did OTA ?
Click to expand...
Click to collapse
the problem has come after I updated my phone to ICS since february I guess. I have almost tried everything on everyday but still having issues. I am sure it is all about software problem, nothing is wrong with hardware
me too i am exactly like you now i am running GB and i ma flashing the radio
I think most of the people having same issues and problems but having no solution for that? it is just ridiculous.
Is there anybody out there that can help us please.
thanks
ozy01 said:
I think most of the people having same issues and problems but having no solution for that? it is just ridiculous.
Is there anybody out there that can help us please.
thanks
Click to expand...
Click to collapse
Hi,
Have a look at THIS THREAD
Particularly # 3 and Extra 1
I have this problem as well...whatever I do, I can't get wifi to work anymore...I reflashed firmware, tried several different roms, I followed the guide in the aforementioned post...nothing helps...it always says "Error" after some time.
Is there anybody who knows what to do?
Struggled with same problem for months...gave up
I had the same problem with my wi-fi and bluetooth. Both would get stuck on "turning on" mode and never come on. Everything else worked fine. I too flashed ROMS, Kernels, RUU's etc. to no avail. SO I GAVE UP. After 2 months without wifi i couldn't anymore so i called HTC, they asked for my S/N and IMEI and confirmed I was still under warranty, so I un-rooted, went back to S-ON, flashed the newest official T-Mobile RUU and shipped the phone away. I called today and they said the MOTHERBOARD was being replaced and I should have it back this week! Woot-Woot! Try giving HTC a call...worst thing that happens is they say NO LONGER UNDER WARRANTY...but you won't find out till you give em a call...*shrug.
I have the same problem with the lock screen and wifi. Except for me the wifi is always on "Error". It doesn't say anything else it just says error. It started happening after a system update failed to install. An update would come up and reboot my phone to try and install it. So it would start up ext4 recovery and ext4 would do some stuff and then reboot again. After boot I was asked again if I wanted to install the update. I repeated this process a couple of times before deciding I had enough and deleted the update.
Wifi has been on Error ever since. Everything else works fine.
Does anyone have any ideas? I'm on a HTC Sensation XE stock rom but HTC Dev unlocked and perm rooted.
Datastreamx said:
I have the same problem with the lock screen and wifi. Except for me the wifi is always on "Error". It doesn't say anything else it just says error. It started happening after a system update failed to install. An update would come up and reboot my phone to try and install it. So it would start up ext4 recovery and ext4 would do some stuff and then reboot again. After boot I was asked again if I wanted to install the update. I repeated this process a couple of times before deciding I had enough and deleted the update.
Wifi has been on Error ever since. Everything else works fine.
Does anyone have any ideas? I'm on a HTC Sensation XE stock rom but HTC Dev unlocked and perm rooted.
Click to expand...
Click to collapse
did you try as malybru said on his post?
use the extra 1 part of this thread
i had the same issue with wifi after an official update
rzr86 said:
did you try as malybru said on his post?
use the extra 1 part of this thread
i had the same issue with wifi after an official update
Click to expand...
Click to collapse
Yes I'm trying to find the boot.img I need but I can't find one that is right for my version and all that.
Datastreamx said:
Yes I'm trying to find the boot.img I need but I can't find one that is right for my version and all that.
Click to expand...
Click to collapse
find your firmware.zip,extract the boot.img from it,place it the file where adb is and then do the commands
ozy01 said:
yes I have tried almost everything, like flashing custom roms or stock ruu almost everyday with different variations. flashing kernels, tweeks, so on and so on.
It works somehow and it disconnect itself after a while or totally stucks in "wireless is turning on". After it get online it makes couple of reboots and it gives "wireless is turning on" error again. I can use the phone for days but wireless never gets on.
The funny point is when wireless on and screen is locked and screen is off. When I attempt to click screen lock button, sometimes it never gives light but I can see that The screen is on and I can move the ring and do whatever i want but it is very hard to see actually. I have to put on light on to see the pictures but it doesnt happen when wifi is off or gives error.
and another funny point is I can swipe down upper bar when screen is locked. I can do bypass.
What the hell is going on my phone? no idea really
Click to expand...
Click to collapse
Hi buddy.. I was having the same problem as you with the wifi error. Also my phone was restarting by itself. what I did was that I removed the SD card and left the phone without it. It worked for me. After that my wifi was working perfectly and no more restarts. I had a 8GB SD Card before, maybe with this new update this 8GB SDcard was too heavy for the phone. I running a 2GB SDcard now with no problems. Please let me know if it worked to you as well.. Good luck!!
ozy01 said:
I think most of the people having same issues and problems but having no solution for that? it is just ridiculous.
Is there anybody out there that can help us please.
thanks
Click to expand...
Click to collapse
I tried this, but it did not work. I'm not sure if my problem is a hardware failure or a software problem. 3 weeks after I got this phone, it got water damaged. Full of water! I took out the battery, letted it dry for some hours and turned it on. Everything worked! Only thing to see from the water, was the spot, that shows if it have got water, was 3/4 red. Everyting went good within a month or so. Then in feburary/march it stopped working (wifi). The same thing for Bluetooth. It's just writing "turns on" wifi or the bluetooth, and after 5-10 minutes it say "error"
Edit: The reason why I wonder about if it's a hardware/software failure is, I do not remember if it came within a install of an costum rom or it just happened out of now where
Any sugestions?
Huotari
I had the same problem, this is how i fixed it : first flahs 4EXT recovery, not clockwork, then get the rom you want and a super wipe, go into recovery, turn smartflash on in tools. Superwipe, then let it reboot, turn smartflash on again, and flash the rom
Sent from my HTC Sensation Z710e using xda premium
Sent from My Omega powered beast, using Xparent ICS
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
timmy-kidd said:
I had the same problem, this is how i fixed it : first flahs 4EXT recovery, not clockwork, then get the rom you want and a super wipe, go into recovery, turn smartflash on in tools. Superwipe, then let it reboot, turn smartflash on again, and flash the rom
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Ignore this info. What you need to do is log into your router hub & change the wifi signal Ch from auto to say, number 4 or summat, guarantee that's your problem.
Sent from My Omega powered beast, using Xparent ICS

Wifi won't work on ICS, only on HC - Help needed

Hello all I hope you can help me with this...
I'm having the strangest issue with my P6200L... Everything was working fine a couple of days ago... I was using latest CM9 by aorth here, browsing the web and everything when suddenly.... Wifi disconnected and never reconnected again...
The symptoms are:
- displays all available networks in range
- if I force to connect, all networks disappear and saved connections are "not in range"
- if I turn off/on again it displays all networks in range again, saved ones are "disabled", if I force connect it repeats the cycle.
I tried factory reset dozens of times. Didn't work.
I tried flashing CM9 again (with this and another patch I found on the thread (forgot where it is)) dozens of times. Didn't work.
I tried flashing official ICS (Open Austria) dozens of time. Didn't work.
Needless to say, I did data wipe/factory reset/format cache/clear dalvik twice between each flash.
And then I flashed stock Honeycomb. It worked. Wifi connected! All was fine!
Marvelous! Or so it seemed...
Now that I got it working again, I want to upgrade to ICS, so I flashed ICS Open Austria. Wifi stopped working.
"Ohh well", I thought, "let's try everything again"
Flashed stock Honeycomb again. Working.
Flashed CM9 + patch. Stopped working.
Flashed ICS Open Austria. Still not working.
Flashed stock Honeycomb yet again. Working.
Flashed ICS Open Austria. Not working.
Flashed stock Honeycomb. Working.
My conclusion: Wifi works only on stock 3.2.
Why? I have absolutely no idea whatsoever.
I've tried every possible combination of flashing and wiping data (except from stock ICS recovery, as I have one of those bad chips and I'm afraid of the brick bug)
Is there anything else left to try? Maybe copying some system files over from stock Honeycomb to an ICS firmware?
I'm really getting desperate here and I've run out of options. I'm hoping the community here on XDA helps me solve this mystery.
It is similiar to this bug here, but although the user there fixed it by several wipes/flashes, apparently I'm not having the same luck.
[last-effort yell]
PLEASE HELP! :crying:
[/last-effort yell]
This is a know issue on ics...
Sent from my GT-P6200 using xda app-developers app
fefopumper said:
This is a know issue on ics...
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Really? On every ICS firmware? But why was it working the first time I flashed ICS, but not anymore?
Sorry for all these questions, it's just that I'm completely dazzled by this issue, hahaha :silly:
But thank you for your reply :highfive:
try wifi fixer, i solved my problem with wifi.
Sent from my GT-P6200 using Tapatalk 2
petrenj said:
try wifi fixer, i solved my problem with wifi.
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
I tried that yesterday, but wifi kept restarting for hours and never connected
there is a wifi fix flashable in recovery search for it somewhere in the android dev section of cm9 by aorth
Justinhopaolo said:
there is a wifi fix flashable in recovery search for it somewhere in the android dev section of cm9 by aorth
Click to expand...
Click to collapse
I did flashed that zip, as stated in OP:
rickmiraldo said:
I tried flashing CM9 again (with this and another patch I found on the thread (forgot where it is)) dozens of times. Didn't work.
Click to expand...
Click to collapse
It's still not working... It flashes successfully but wifi still can't connect
Maybe you hve the wrong password..
Sent from my GT-P6200 using xda premium
Justinhopaolo said:
Maybe you hve the wrong password..
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Hahahaha I'm 100% sure this is NOT the issue here
Wifi networks keep dissapearing when I try to connect. I have tried in 3 different routers with different encryption settings, so I'm sure this is not on my end.
Could be that you flash and incorrect firmware, maybe for the p6210 tab?
Sorry, I'm just guessing , I don't know what could be the problem.
Kuniokun said:
Could be that you flash and incorrect firmware, maybe for the p6210 tab?
Sorry, I'm just guessing , I don't know what could be the problem.
Click to expand...
Click to collapse
No problem about that, we're all guessing
But no, I'm sure it's for the P6200 because it worked the first time I flashed. If it was for the P6210 my tab wouldn't even boot, partition layout is different...
I'm having this kind of issue aswell. Wifi is doin' fine with HC 'til flashed it to ICS. Damn, I really hope someone could help us regards with this issue. I also tried Wifi fixer, it helps but not that enough. 'Cause it connects me to my wifi but after a minute or two. It'll disconnect and reconnect. This is happening again and again. And it's kinda annoying when watching video on youtube or surfing the net. Well, just sharing my issue.
Yeah, I know how it's like... I reverted back to ICS while there isn't a fix... It's weird because it also happens on official ICS from Samsung, which it shouldn't
guys, I had the identical problem with wifi on ics. I returned to the hc and wifi worked. Then again the ics and did not work. Wipe cache, Dalvik, data, everything I tried several times and no results . Then I installed wifi fixer and it was a little better, over *# 94 349 # tablet began work with the occasional stop. a couple of times I rebooted it. and after one reboot started to work normally. I know that I m not helped, but it is my experience.
Sent from my GT-P6200 using Tapatalk 2
petrenj said:
guys, I had the identical problem with wifi on ics. I returned to the hc and wifi worked. Then again the ics and did not work. Wipe cache, Dalvik, data, everything I tried several times and no results . Then I installed wifi fixer and it was a little better, over *# 94 349 # tablet began work with the occasional stop. a couple of times I rebooted it. and after one reboot started to work normally. I know that I m not helped, but it is my experience.
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Are you talking about this app? I've tried that, but the only thing it did was to keep disabling/enabling the wifi... Several reboots later, same results... I'm glad it worked for you, but so far I'm not in luck
http://forum.xda-developers.com/showthread.php?p=21406675
check this thread..
Sent from my GT-P6200 using Tapatalk 2
petrenj said:
http://forum.xda-developers.com/showthread.php?p=21406675
check this thread..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
OK, I got some progress.... But it's still bad, keeps disconnecting... Here's what I've done...
I flashed CM9 with wifi patch and tried the app above. Restarted, no luck. Still didn't work.
I removed my SIM card, restarted in CM9, and Wifi worked! If I put it back in, wifi stops working.
I tried changing country codes with the app above, lost 3G SIM card connectivity. No wifi and no 3G, I though I f***ed up everything.
ODINed back to stock Honeycomb. Got a "no SIM card" error. But wifi worked.
Restarted several times, tried changing country codes several times, still got the "no SIM card" error.
After several attempts by removing/inserting the SIM card and restarting I got it working, finally.
Tried flashing ICS Open Austria. Both Wifi and 3G works!!! However wifi keeps disconnecting every 40 seconds or so.
Tried Wifi Fixer from Market, but all it does is monitor when wifi disconnects and then resets it. It connects again, but 40 seconds later it disconnects again, thus repeating the cycle.
It's still not usable, but it is some progress. I'm afraid to factory reset in official ICS because of brick bug, but I'm willing to do some more steps if anyone got some more ideas
THANK YOU very much for your response petrenj! We're getting somewhere here! :good:
rickmiraldo said:
OK, I got some progress.... But it's still bad, keeps disconnecting... Here's what I've done...
I flashed CM9 with wifi patch and tried the app above. Restarted, no luck. Still didn't work.
I removed my SIM card, restarted in CM9, and Wifi worked! If I put it back in, wifi stops working.
I tried changing country codes with the app above, lost 3G SIM card connectivity. No wifi and no 3G, I though I f***ed up everything.
ODINed back to stock Honeycomb. Got a "no SIM card" error. But wifi worked.
Restarted several times, tried changing country codes several times, still got the "no SIM card" error.
After several attempts by removing/inserting the SIM card and restarting I got it working, finally.
Tried flashing ICS Open Austria. Both Wifi and 3G works!!! However wifi keeps disconnecting every 40 seconds or so.
Tried Wifi Fixer from Market, but all it does is monitor when wifi disconnects and then resets it. It connects again, but 40 seconds later it disconnects again, thus repeating the cycle.
It's still not usable, but it is some progress. I'm afraid to factory reset in official ICS because of brick bug, but I'm willing to do some more steps if anyone got some more ideas
THANK YOU very much for your response petrenj! We're getting somewhere here! :good:
Click to expand...
Click to collapse
Unfortunately I'm experiencing the same problem as yours. I have 3 tabs and all of them exhibits the problem in ICS. Wifi seems a lot more stable in honeycomb. I already tried xxlpl and xxlpn with/without wifi fix from aorths cm9. I'm also experiencing force reboots when I disable and enable wifi for sometime.
ejoya said:
Unfortunately I'm experiencing the same problem as yours. I have 3 tabs and all of them exhibits the problem in ICS. Wifi seems a lot more stable in honeycomb. I already tried xxlpl and xxlpn with/without wifi fix from aorths cm9. I'm also experiencing force reboots when I disable and enable wifi for sometime.
Click to expand...
Click to collapse
How odd... It's weird that some people have this issue while others don't... Also, I'm beggining to wonder if this is something that aorth or other dev can fix, seeing as it affects several different devices with ICS, and not only our tab. I don't think it's a hardware problem, because wifi works in Honeycomb...
So far, if we want to use wifi in our tabs we must remove the SIM card or just stick with Honeycomb... I've stopped using my tab for a while due to the constant data wipes/flashes and dedicated it to try to fix this issue... I really don't want to restore all my apps twice a day while switching between ICS and HC versions
Are there any P6210 users reading this? If yes, are you able to use wifi in your tab? As the P6210 doesn't have a slot for a SIM card, this shouldn't affect you, right?
Anyway, let's wait for aorth to be back from his trip and introduce this thread to him. He should be able to clarify something to us.
Affects P6210 as well
GT-P6210UWR
XXLB2 Firmware as stock
16GB wifi without I.R.
Sent from my GT-P6210 using XDA Premium App

[Q] installed rom and now I have NO service.

Hey guys,
No matter what I do I can't get my service to work again. All it shows at the top is a little circle with a slash through the middle. I tried installing a custom rom but ran into some problems. So I "restored" my backup through rom manager. But i don't have service anymore. Since this happend I have tried several new roms and I still can't get the service to come back.
Some people say it has something to do with the IMEI but according to my setup I still have one.
I have been working on this problem for nearly 13 hrs none stop! Please help... I have searched everywhere.
Thanks
ptiworld said:
Hey guys,
No matter what I do I can't get my service to work again. All it shows at the top is a little circle with a slash through the middle. I tried installing a custom rom but ran into some problems. So I "restored" my backup through rom manager. But i don't have service anymore. Since this happend I have tried several new roms and I still can't get the service to come back.
Some people say it has something to do with the IMEI but according to my setup I still have one.
I have been working on this problem for nearly 13 hrs none stop! Please help... I have searched everywhere.
Thanks
Click to expand...
Click to collapse
If your IMEI and all that information is correct then you may have a bad sim card resulting in no service at all. Otherwise i'd recommend using odin to go back to completely 100% stock and see if that fixes it.
Neverendingxsin said:
If your IMEI and all that information is correct then you may have a bad sim card resulting in no service at all. Otherwise i'd recommend using odin to go back to completely 100% stock and see if that fixes it.
Click to expand...
Click to collapse
Thank you so much for responding. I have tried to restore stock with odin but every time odin finishes my phone still boots up my existing rom. Any quick ideas with that one?
And do you really think my sim could have just gone bad like that? It's free to get a new one so maybe I will try that as a last resort.
I don't know much about rooting but could it be my radio?
A couple of questions?
Is boot loader unlocked, if so how did you unlock, updated ver 1.4 ez-unlock can mess up and relock boot loader. Use ver 1.2 . "Verizon only"
What ROM and kernel? Make sure its for your carrier.
Any radio should be OK as long as its for you phone and carrier.
See the Galaxy sIII shine via SynergyRom
did you try reprovisioning your device with dialer code *2767*3855?
note that this does wipe internal sd so back ur **** up!
I tired the above number in dialer but always comes up with error saying "mobile network not available".
Am I doing something wrong?
Oh.... You forgot to ad a # on the end of that number. After this everything started working again!!! Thank you so much!
ptiworld said:
Oh.... You forgot to ad a # on the end of that number. After this everything started working again!!! Thank you so much!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1954331 I had this happen last week and this is what fixed it for me.
Christian
Neverendingxsin said:
If your IMEI and all that information is correct then you may have a bad sim card resulting in no service at all. Otherwise i'd recommend using odin to go back to completely 100% stock and see if that fixes it.
Click to expand...
Click to collapse
What fixes the problem. This happened to me after flashing the latest MIUI ROM on my Verizon S3.
I tried re provisioning my phone with the number sequence below but it did not work. I also used the phone info app but I'm not sure what I'm supposed to do.

[Q] Have IMEI number, but lost phone number after flashing

I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
RESOLVED
james3kral said:
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
I ran into the same problem but after trying you fix I still have no service. ?????
TheBurgh said:
I ran into the same problem but after trying you fix I still have no service. ?????
Click to expand...
Click to collapse
I am having the same problem. The phone wont still activate. Please help!!
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
Any one try Odin back to stock?
I have a similar issue and I have been going around and around with it without any luck. I restored my latest backup and I still have 000-000-3257 with a PRL of 1. I will try the ops recommendation and will report back.
Odin to stock is my next move unless someone else can think of something else to try.
Try clearing dalvik cache in recovery. Fixed it for me on AOKP. Had the exact same thing where my phone number was a bunch of zeroes. Still had service though when I hit the home button to bypass the activation screen.
Sent from my SCH-I535 using Tapatalk 2
I tried to remove the sim, and boot, and readd the sim and boot but no go. I will try it again but then I think I am going back to stock to see if that works.
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
TechSavvy2 said:
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
Click to expand...
Click to collapse
My issue is it is affecting my functionality. My phone is not working and whenever I call out I get a generic message saying my phone is not active.
I restored a backup from when I first rooted. Now my phone number is listed properly and when I get into a 4G coverage area I can get data, but I still can't call out and it shows I am roaming when I am in a 3G area.
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
dknell said:
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
you can try that or mastamoons both have been reported to work
mastamoon said:
Here is my unofficial 10.1 build as of 3:00pm EST.
Has working data and increased MMS picture size mod. Otherwise is stock CM10.1
http://bit.ly/12yrtcw
Click to expand...
Click to collapse
Droosh said:
Thanks for sharing! I did a full data wipe and installed this and it activated right away.
Click to expand...
Click to collapse
I was very unlucky and the dirty flash didnt work for me. However, I did have a backup of my IMEI and was able to flash it back to my phone.
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
brandao.gabe said:
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
Click to expand...
Click to collapse
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
fowen said:
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
Click to expand...
Click to collapse
I flashed back to stock as well and then used the same number to reprovision. After that everything worked fine it fixed the roaming, incorrect number, PRL, and all. I never lost my IMEI so I didnt do that step. but if you flash back to the cm 10.1 before they fix the data it will happen again :laugh:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I can't remember for sure, but I think that is something that the VZW tech had me do, and it didn't work. Maybe someone else who is having the issue can test and comment.
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This fixed it for me! Thank you very much!
Sent from an unlocked Galaxy S 3! Screw you Verizon!

[Q&A] Hyperdrive Rom S3║ Non-Development Discussion ║ Support

Hyperdrive Rom Support Thread for All US Galaxy S3 Varient​
This Thread is Started for Help and Support for those Members who cannot post in development threads or do not have enough posts to do so.
You may ask your general questions/issues here.
Please respect all members, especially those trying to provide you with help.
Please read the Frequently Asked Questions in the Rom Thread before asking questions
Thank you
Mine
Reserved
Currently I am running the Hyperdrive ROM 13.0.0 and today my phone is really acting up. The power button is unresponsive. I am not sure if this is a hardware issue or what. It just randomly became unresponsive. When I try to boot into recovery or download mode, the screen will pop up for literally one second and then the phone will cut off. So booting into recovery and/or download mode is a no go. The only way I can get it to boot all the way back up is if I pull the battery out and then put it back in and then hold the volume down button and the home button and then quickly hit volume down to cancel the download mode operation and then the phone restarts and reboots all the way.
Also, when trying to send text messages, it always says failed to send message and yet the message still goes through because the person I am texting always responds to the message that supposedly failed.
I was wanting to update to Hyperdrive 16 but now I just want to restore my phone to working order. Any help would be so greatly appreciated!
heels50blue said:
Currently I am running the Hyperdrive ROM 13.0.0 and today my phone is really acting up. The power button is unresponsive. I am not sure if this is a hardware issue or what. It just randomly became unresponsive. When I try to boot into recovery or download mode, the screen will pop up for literally one second and then the phone will cut off. So booting into recovery and/or download mode is a no go. The only way I can get it to boot all the way back up is if I pull the battery out and then put it back in and then hold the volume down button and the home button and then quickly hit volume down to cancel the download mode operation and then the phone restarts and reboots all the way.
Also, when trying to send text messages, it always says failed to send message and yet the message still goes through because the person I am texting always responds to the message that supposedly failed.
I was wanting to update to Hyperdrive 16 but now I just want to restore my phone to working order. Any help would be so greatly appreciated!
Click to expand...
Click to collapse
Odin back to stock. And then flash rls16
Sent from my SCH-I545 using xda premium
sbreen94 said:
Odin back to stock. And then flash rls16
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
The problem is I can't get my phone into download mode to be able to use ODIN. Download mode will pop up for literally one second and then the phone shuts off.
mms
I am on MetroPCS and I can not get mms to work on 16, it worked fine on 13. Please help me.
ccsmoker said:
I am on MetroPCS and I can not get mms to work on 16, it worked fine on 13. Please help me.
Click to expand...
Click to collapse
Link me to a stock premium suite ROM for your carrier and I will fix it. I don't have your phone or carrier
Sent from my SCH-I545 using xda premium
sbreen94 said:
Link me to a stock premium suite ROM for your carrier and I will fix it. I don't have your phone or carrier
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
It will not let me post the link, I am too new to the forum.
Shazam app not working on hyper drive 16.0.0 as well as video recorder.
This is. A great rom. Just I notice Shazam not working. It starts up then exit to the home screen. The S4 camera video recorder not working. Starts. up then turns to fuzz. Then say not able to capture media.
Incoming call volume ringer not working
I had previously had the RLS15 rom and it worked great for about a month then all of a sudden my ringer stopped working. Every other sound works. My notifications and media works just fine. So i was forced to flash back to stock rom. I was really disappointed because i love this rom. Then when the RLS16 rom came out i was really hoping this would fix my issue but it didnt. I really dont want to go back to another rom to have my ringer volume work again.
collettgirl said:
I had previously had the RLS15 rom and it worked great for about a month then all of a sudden my ringer stopped working. Every other sound works. My notifications and media works just fine. So i was forced to flash back to stock rom. I was really disappointed because i love this rom. Then when the RLS16 rom came out i was really hoping this would fix my issue but it didnt. I really dont want to go back to another rom to have my ringer volume work again.
Click to expand...
Click to collapse
Like your phone ringtone?
Sent from my SCH-I545 using xda premium
sbreen94 said:
Like your phone ringtone?
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Yes my phone ringtone. also when i set my phone ringtone to vibrate and ring. It will just vibrate when someone calls. Thank you for you quick response and trying to help me. Much appreciated.
Tablet/Phablet Mode
Currently running RLS16 and it's running great!!!! Just curious on how I can get the phone to do a tablet mode and/or phablet since there's no hybrid settings baked into the ROM yet. Any help would be apprectiated.
hyperdrive rls16
Have a Verizon Galaxy S3 and followed Roms install instructions: 1.Download latest Hyperdrive Rom version Rls 16
2. Reboot into Recovery
3. Wipe Data/Factory Reset twice
4. Wipe cache and dalvik cache
5. Install Rom
6. Reboot.
But when phone reboots it loads and gets to the language screen and then will reboot and will do that over and over. Have tried it several times and same result did not have that problem with Rls 15. Any Help would be greatly appreciated. Thanks
GPS Fails to Lock (SCH-I535)
First of all, thank you to SBreen for your hard work on this ROM!
I just updated to RLS16 (standard kernel) hoping that it would fix my GPS and google Maps issues, but no luck so far. Below are the methods I have tried in my attempt to fix the GPS:
1) Clean ROM install (four times) including formatting all user/system data, wiping Dalvik cache, etc.
2) Fix Permissions from Clockwork Recovery (countless times)
3) Clearing all app data for google applications, including deleting velvet.apk from system and re-installing through the play store (and using standalone .apks)
4) Tightening the screws on the back of my S3
5) Enabling all location service providers
6) Removing Hyperdrive and restoring to the original ROM (yuck!) restores GPS functionality, so I know it's not physically broken.
I love everything about this ROM with the sole exception of the lack of GPS functionality. Google Maps is currently unusable, and GPS Status will run for hours without acquiring a lock, even with the phone in a stationary position in high-reception areas.
Any help on this issue is greatly appreciated, thanks!
After flashing, were you able to let the phone sit for 5-10 minutes before rebooting and setting it up? I found this crucial to getting the GPS to work...
Sent from my SCH-I535 using xda app-developers app
Wifi Automatically turning on
So far so good on rls16. Its great work, and I am digging all the great features and customization options. Performance is smooth. One issue though, which has plagued me on rls15 as well...
My WiFi keeps automatically turning itself on. It happens when the screen is off and has been sitting on my desk for a while, also happens while I am using it. I believe it is supposed to turn on and then off when downloading mms data, but that is not the case here. It wouldn't be an issue, except it is connecting me to the open network here in my office, which I need to sign into on a web interface every time I connect. The WiFi signal is very, very poor so I prefer not to connect. Any ideas?
Thanks!
RLS16 problem
I have been using rls15 with no problem except for the initial install with the Samsung activation. I love your builds they really bring out the capabilities of the device. I updated to RLS16 and the activation problem came back and also I'm now having sms problems. It works well for so long then it starts returning messages saying they failed. I've flashed and wiped 4 times before the install of rom and have tried to install the fix. Still no solution. Any advice? I'm also using att i747
Boot Animation
First, I would like to congratulate you for this wonderful ROM.
Only trouble is; unable to customize the boot animation. I've tried a few applications, but none were successful.
I will appreciate you help. Thank you.
Have a Verizon Galaxy S III

Categories

Resources