Will this kernel work with my phone/rom? - Verizon Samsung Galaxy S III

I am running CM 10.1 nightly on my d2vzw and I just want to make sure that this kernel would wouldn't brick my phone. Thanks
http://forum.xda-developers.com/showthread.php?t=2226894

uromastix87 said:
I am running CM 10.1 nightly on my d2vzw and I just want to make sure that this kernel would wouldn't brick my phone. Thanks
http://forum.xda-developers.com/showthread.php?t=2226894
Click to expand...
Click to collapse
It is a silly question only because you're asking if a kernel meant for this device and for the type of ROM you're running will work. Since you're using 10.1 nightly use the 3.4 version of the kernel. FYI all AOSP kernels will work with your ROM since they have 3.4 versions for Android 4.2.2 and please know the difference between a software brick and a hardware brick. Enjoy your ROM.

Related

[Q] [i9020-T] Trinity UV Kernel Flashing

Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
boredomkillz said:
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
Click to expand...
Click to collapse
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
treUse said:
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
boredomkillz said:
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
Click to expand...
Click to collapse
it should work on any 2.3.4 cm based roms.

LG Phoenix?

What roms have you guys gotten running on the lg phoenix/ P505 with the joban kernel
thugnastie said:
What roms have you guys gotten running on the lg phoenix/ P505 with the joban kernel
Click to expand...
Click to collapse
About your question, i got running on my lg thrive, which is identical in hardware to the lg phoenix; gingersnap, gingerdx, gtr, cyanogen mod 7.2,, only that ones...
Currently joban's kernel is only supported in gingerbread, even in those roms is kind of unstable...
Now, we have a new kernel from the great developer DJnoXd, it supports Ice Cream Sandwich, and Jellybean... But if you are only interested in Gingerbread, tell me and i will pm you a better method to get roms
DJnoXd kernel will work on GB also. Arjen has a kernel that will work on GB too.
joban kernel is old base band... so any p500 rom that is obb will work.
savagephoenix said:
DJnoXd kernel will work on GB also. Arjen has a kernel that will work on GB too.
joban kernel is old base band... so any p500 rom that is obb will work.
Click to expand...
Click to collapse
can you give me the link to the rom and kernel your useing
Do I flash the rom then the kernel right after or do I flash the rom, boot up the phone then go back into recovery to flash the kernel
Just figured out djnoxd kernel no good for gb. Found in original development here on xda
Arjens is found at androidcentral under Phoenix / thrive thread
Sorry no links .. on phone.
Flash rom. Reboot recovery. Flash kernel. Recamend full boot. Then flash gapps. But can flash gapps after kernel
iirc I just read the new kernel runs on the p500/505/509, I don't know which one is the phoenix tho
Sent from my LG-P500 using xda app-developers app
i believe that to be the new 3.0 kernel
so no one could give me links
http://forum.xda-developers.com/showthread.php?t=1587209 DJNoXD ICS and 4.1.x
http://forum.xda-developers.com/showthread.php?t=2144790 3.0 kernel by androidarmv6 team maybe ICS primarily for 4.1.x & 4.2.x
http://forum.xda-developers.com/showthread.php?t=2140930 sweetnsour i think still in beta, primarily for ICS, may work on JB
http://forums.androidcentral.com/t-...gerbread-cm-2-6-35-kernel-thrive-phoenix.html Arjens GB kernel
dont be lazy. do read the OP and make sure you know what your doing.

kernel questions

are there any new kernels or older kernels that will work with the 4.2 bootlader and the latest .27 firmware? i just finally updated from 4.1 bootloader to 4.2 and latest firmware. did this so i could update cm10.1 from a old june version i had to the latest and greatest 10.2 . on my old setup i ran perf kernel. does anyone know of any kernels i can run on new setup?
Are you looking for a kernel for .27 firmware or a kernel for CM10.2?
hardslog said:
Are you looking for a kernel for .27 firmware or a kernel for CM10.2?
Click to expand...
Click to collapse
more for cm10.2 does perf kenel still work?
No, perf kernel is not working anymore. Hasn't for a while.
I have been able to get some stock based kernels modified for CM10.1, one of them has overclocking abilities too. As for CM10.2, right now you are out of luck, as builds for it are still so new.
Sbdags has O/C kernels that work with CROMI, but those are all stock based.
hardslog said:
No, perf kernel is not working anymore. Hasn't for a while.
I have been able to get some stock based kernels modified for CM10.1, one of them has overclocking abilities too. As for CM10.2, right now you are out of luck, as builds for it are still so new.
Sbdags has O/C kernels that work with CROMI, but those are all stock based.
Click to expand...
Click to collapse
Ya sucks I was happy with perfect and cm10.1 but of course cm force me to update as it wasn't supporting new 4.1 bootloader anymore. I figured if I was going to do it I'd go big. IL just wait it out. Cm 10.2 is running OK with exception of gas issue.
Sent from inside my mkv.
I got Hundsbuah's kernel working in CM10.1 with O/C
hardslog said:
I got Hundsbuah's kernel working in CM10.1 with O/C
Click to expand...
Click to collapse
Good ****. Let me know if you need testers on 10.2
Sent from inside my mkv.

[Q] [p3113]Will OC kernels work with cm11 based roms?

Hello to all.
I upgraded from cm10.1.3 stable today, which I had over clocked. So I would just like to know if anyone knew if over clocking kernels would work with cm11 based Roms. Thank you.
Edit:I got the answer I needed. Resolved
I forgot to mention that I am using Mokee ROM specifically. Not sure if that makes a huge difference but, just in case...
should work
Android-andi has oc kernels in his cm11 and omni thread. Should work considering that mokee's cm based
mirzafran said:
Android-andi has oc kernels in his cm11 and omni thread. Should work considering that mokee's cm based
Click to expand...
Click to collapse
Thank you. I'll give it a try. I guess this is resolved

[Q] XT926 PA 4.4 Final

I am currently using a XT926 with stock KitKat (unlocked/unrooted) and have a kernel version of 3.4.42. I read that 3.4 kernel wouldn't work with PA, but a 3.0 would. What steps would I need to take to have the correct kernel running as to not mess up my phone?
oFumbleSo said:
I am currently using a XT926 with stock KitKat (unlocked/unrooted) and have a kernel version of 3.4.42. I read that 3.4 kernel wouldn't work with PA, but a 3.0 would. What steps would I need to take to have the correct kernel running as to not mess up my phone?
Click to expand...
Click to collapse
you have to downgrade to JB for that.. because the 3.0 kernel just work with Jelly Bean Bootloader..

Categories

Resources