are there any new kernels or older kernels that will work with the 4.2 bootlader and the latest .27 firmware? i just finally updated from 4.1 bootloader to 4.2 and latest firmware. did this so i could update cm10.1 from a old june version i had to the latest and greatest 10.2 . on my old setup i ran perf kernel. does anyone know of any kernels i can run on new setup?
Are you looking for a kernel for .27 firmware or a kernel for CM10.2?
hardslog said:
Are you looking for a kernel for .27 firmware or a kernel for CM10.2?
Click to expand...
Click to collapse
more for cm10.2 does perf kenel still work?
No, perf kernel is not working anymore. Hasn't for a while.
I have been able to get some stock based kernels modified for CM10.1, one of them has overclocking abilities too. As for CM10.2, right now you are out of luck, as builds for it are still so new.
Sbdags has O/C kernels that work with CROMI, but those are all stock based.
hardslog said:
No, perf kernel is not working anymore. Hasn't for a while.
I have been able to get some stock based kernels modified for CM10.1, one of them has overclocking abilities too. As for CM10.2, right now you are out of luck, as builds for it are still so new.
Sbdags has O/C kernels that work with CROMI, but those are all stock based.
Click to expand...
Click to collapse
Ya sucks I was happy with perfect and cm10.1 but of course cm force me to update as it wasn't supporting new 4.1 bootloader anymore. I figured if I was going to do it I'd go big. IL just wait it out. Cm 10.2 is running OK with exception of gas issue.
Sent from inside my mkv.
I got Hundsbuah's kernel working in CM10.1 with O/C
hardslog said:
I got Hundsbuah's kernel working in CM10.1 with O/C
Click to expand...
Click to collapse
Good ****. Let me know if you need testers on 10.2
Sent from inside my mkv.
Related
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
boredomkillz said:
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
Click to expand...
Click to collapse
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
treUse said:
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
boredomkillz said:
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
Click to expand...
Click to collapse
it should work on any 2.3.4 cm based roms.
Hi everyone,I have a sensation xe.
I flash the Bricked's kernel, because the sweep2wake is very cool.But after i flash the kernels into AOKP, everything goes well expect the wifi.I also try RCMix's kernel, and faux's kernel, but same the result.
How could i use the phone without wifi!
I need to flash a kernel for AOKP with a feature like sweep2wake, and the wifi should be work.Can someone help me?
English is not very well, but i try my best to write these
I believe Faux has an AOSP kernel. The ones you tried are Sense based, which is the problem.
Sent from my Sensational Sachiel.
l2icky said:
I believe Faux has an AOSP kernel. The ones you tried are Sense based, which is the problem.
Sent from my Sensational Sachiel.
Click to expand...
Click to collapse
Thanks a lot！I have found Faux's AOSP kernel and the wifi worked althought without sweep2wake. The only way is to way the new version.
vince.liu said:
Thanks a lot！I have found Faux's AOSP kernel and the wifi worked althought without sweep2wake. The only way is to way the new version.
Click to expand...
Click to collapse
I know Faux put Sweep2Wake in his Sense versions. I am spoiled with it as well, you might shoot him a message or post in the thread and ask if a future release for AOSP will have Sweep2Wake.
suggestion, I'm on aokp since build 32...don't use custom kernels, is better with the stock one...more stable...I use it at 1ghz and is ****in' great! no lags at all, even gaming
there is no sweep2wake kernel for aosp at the moment, just wait
throcker said:
suggestion, I'm on aokp since build 32...don't use custom kernels, is better with the stock one...more stable...I use it at 1ghz and is ****in' great! no lags at all, even gaming
there is no sweep2wake kernel for aosp at the moment, just wait
Click to expand...
Click to collapse
Or make it yourself based on the sources that do have it
Sent from my HTC Sensation using XDA
throcker said:
suggestion, I'm on aokp since build 32...don't use custom kernels, is better with the stock one...more stable...I use it at 1ghz and is ****in' great! no lags at all, even gaming
there is no sweep2wake kernel for aosp at the moment, just wait
Click to expand...
Click to collapse
You're right.
I'm running the latest CM9 nightly and noticed that the kernel does not give great battery and only runs at 1.2Ghz...
Was wondering if anyone could recommend me a kernel that goes up to at least 1.5Ghz and preferably has a GPU overclock too, that will work with CM9.
Thanks!
You can try Faux´s AOSP Kernel. But i think it´s Faux´s kernel they are using as stock.
http://forum.xda-developers.com/showthread.php?t=1258816&page=31
Bricked doesn´t have one yet. Dunno about Sebastian..
I tried CM9 and the battery sucks to me as well. After all its at Nightly stages so i just let it be for Beta testers and wait for the Official release.
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
chronophase1 said:
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
Click to expand...
Click to collapse
Thanks for reply.
Does it will wipe my data/apps as well?
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
chronophase1 said:
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
Click to expand...
Click to collapse
has your kernel been replaced??? or is it the same ??
For ****s-and-giggles, I threw the matr1x kernel on top of my 4.1.1 ota last night ... It didn't work.
asdf2020 said:
has your kernel been replaced??? or is it the same ??
Click to expand...
Click to collapse
Yea. My app settings stayed the same, but like I said, my kernel got replaced, which is expected. I don't use matrix though and seeing as the kernel sources vary, chances of it working are pretty slim, as seen above.
asdf2020 said:
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
Click to expand...
Click to collapse
Your kernel will get replaced. I wouldn't recommend it because I've tried other kernels with the official OTA JB ROM and the experience wasn't as smooth. I have yet to try Matr1x kernel yet though.
No different versión of Ndroid not supported at least yet ;D
Lets just say hes workin on it i would expect
So......official JB 4.1 won't work on my Matr1x kernel
I've unlocked the 4.1.1 JB bootloader and proceded to flash cm10.1
I'm under the belief that the stock kernel is out of date and I'm looking for a kernel update. Some hints in the right direction would be very helpful.
kingkira said:
I've unlocked the 4.1.1 JB bootloader and proceded to flash cm10.1
I'm under the belief that the stock kernel is out of date and I'm looking for a kernel update. Some hints in the right direction would be very helpful.
Click to expand...
Click to collapse
As far as I know, CM10.1 is not compatible with ASUS stock kernels. CM10.1 runs on it's own Cyanogenmod base kernel. So your choices for alternative TF300T cm10.1 kernels are:
1. Perf Kernel based on Franco by chrmhoffmann: http://forum.xda-developers.com/showthread.php?t=2182956
2. Unofficial CM10.1 by surdu with his own modified CM10.1 based kernel: http://forum.xda-developers.com/showthread.php?t=2112369
I would recommend using the Perf Kernel based on Franco by chrmhoffmann, if you're on official cm10.1.
Oh okay thanks for the help! For some reason during the portait mode on my tablet it have a lot of lagg issues. do you think you have a solution?
kingkira said:
Oh okay thanks for the help! For some reason during the portait mode on my tablet it have a lot of lagg issues. do you think you have a solution?
Click to expand...
Click to collapse
So far, I haven't encountered lag issues exclusive to portrait mode. I have used CM10.1 nightly up to April 13. Then, I switched to unofficial AOKP and CM10.1 by surdu. But, due to quick battery draining issue with surdu unofficial AOKP, I went back to stock ASUS rom for a while. And, finally decided to try CROMI 4.3 and am now on CROMI 4.4.1, which are based on ASUS stock ROM and kernels.
I can't say I have seen lag issues on portrait mode during my switching of kernels and ROM. My guess is that your lag issue might be caused by a particular app or some combination of apps.
When tinkering around with GMT gesture control, with the status bars off the portrait lag disappeared. I'm not sure what the cause is :/.
I've ran the Perf kernel with CM10.1 plus the Franco app. It's a great combination. Just make sure you turn the speed down when you don't need it or it will eat up your battery pretty quick.
Sent from my LG-LG855 using Xparent SkyBlue Tapatalk 2