Hi,
I was running CM 10.1 and later on i decided to Try out PAC-MAN Rom so i FXD back to ICS -> Installed BMM and flashed PAC as my primary system but since it started to Give me Black screen problems so i decided to FXZ back to ICS so that i could go back to my CM 10.1.
But after FXZ'ing back my phone has started rebooting every 5 Minutes. Any ideas as to How to FIX this?
My phone is running stock ICS ATT version Now.
Did you wiped data from stock recovery after flashing via RSD & what A2 you have international or at&t?
Sent from my Atrix 2 using Tapatalk 2
turffe said:
Did you wiped data from stock recovery after flashing via RSD & what A2 you have international or at&t?
Sent from my Atrix 2 using Tapatalk 2
Click to expand...
Click to collapse
Hi , Yes i wiped the data after factory reset via recovery. I have an International Atrix 2. Please advice if i can try something else.To add to that,it also does not connect to mobile network,The only thing that it does it connect to Wi-fi.
If you flashed to International Atrix 2 AT&T firmware you're screwed‚ but not completely.... Best way is to bringt it to warranty.... They will couple times trying to flash international fw via RSD‚ but it will failing so they will change your mainboard... Biggest mistake is flashing to International A2 AT&T firmware‚ because secure version increasing & you cannot downgrade from it....
Sent from my Atrix 2 using Tapatalk 2
turffe said:
If you flashed to International Atrix 2 AT&T firmware you're screwed‚ but not completely.... Best way is to bringt it to warranty.... They will couple times trying to flash international fw via RSD‚ but it will failing so they will change your mainboard... Biggest mistake is flashing to International A2 AT&T firmware‚ because secure version increasing & you cannot downgrade from it....
Sent from my Atrix 2 using Tapatalk 2
Click to expand...
Click to collapse
My warranty is already out.So cant do anything to get it bag replacing a motherboard will cost a bomb here in India. I tried flashing different versions of firmware but no luck. Tried flashing the JB leak as well but tough luck there as well.
Do you think i must have messed up something while using the BMM for installing PAC-MAN Rom?
Related
Hey all, I recently rooted my atrix 2 about 3 days ago then decided I wanted to run ICS so I went back to 2.3.5 then OTA'd to 2.3.6 and got my phone on ICS following Jim's guide. Everything went fine and I was running ICS fine until I downloaded ROMtoolbox and tried to change my font to the DROID font. the screen flashed and everything went to chinese and then my phone reboot itself but now it keepts getting stuck on the white AT&T screen, I've tried running through recovery and rebooting but everytime it just freezes on that screen.
Nevermind guys I got it all back up and working by just reinstalling ICS from recovery menu.
J9993 said:
Hey all, I recently rooted my atrix 2 about 3 days ago then decided I wanted to run ICS so I went back to 2.3.5 then OTA'd to 2.3.6 and got my phone on ICS following Jim's guide. Everything went fine and I was running ICS fine until I downloaded ROMtoolbox and tried to change my font to the DROID font. the screen flashed and everything went to chinese and then my phone reboot itself but now it keepts getting stuck on the white AT&T screen, I've tried running through recovery and rebooting but everytime it just freezes on that screen. Please help
Click to expand...
Click to collapse
Can you get into bootmenu? If yes, do you have an ICS based backup?
If you don't have a backup or bootmenu the only thing you can really do is fkz back to GB 2.3.5 and re-update...
And for future reference... don't use rom toolbox.. it usually doesn't end well... as you might have figured out.
PEOPLE! Stop goofing around with things using ROM Toolbox, it does nothing for your phone other than cause headaches. I've soft bricked using it, others are having similar problems. It's not worth the hassle. Seriously...
Sent from my rooted Mayan Calendar
Apex_Strider said:
PEOPLE! Stop goofing around with things using ROM Toolbox, it does nothing for your phone other than cause headaches. I've soft bricked using it, others are having similar problems. It's not worth the hassle. Seriously...
Sent from my rooted Mayan Calendar
Click to expand...
Click to collapse
Yupp, even i bootlooped trying to change the font.
Sent from my MB865 on rooted ICS leak
so it would be better to have the individual apps themselves instead of toolbox or stay away from those apps in general? also is it still possible to do the wifi tethering with the ICS leak?
I flashed JB on my gt-n8013, and then i wanted to return back to ICS as Kno doesn't want to run. So i downloaded the GT-N8013 from Sammobile and flashed it in.
But when it's rebooting it's kept hanging on Samsung logo and doesnt want to run. what can i do. Help please
http://forum.xda-developers.com/showthread.php?t=2080366
try re-flashing.. or re-downloading the file... it might be corrupted
Well you need to boot into recovery and do a comple wipe unfortuantely you will lose all data
I would suggest to you that if you redownload the rom and it still does not work then you should try out a different rom, because it seems like you may have downloaded a rom for a similar tablet and now find yourself running into issues.
Sent from my GT-N7100 using xda premium
I Reflashed again JB UK 4.1.1 and it's working fine, but i can't switch back to ICS GT-N8013. I'm in exams' period and some of my studies on Kno :S and i can't get it working, i contacted them and told me they're still working on a JB version :S
Thanks all
Boot to recovery Factory reset .
Flash stock ICS rom via Odin .
jje
You will loose ALL data on internal card so back up before doing this...
AbdallahSaied said:
I Reflashed again JB UK 4.1.1 and it's working fine, but i can't switch back to ICS GT-N8013. I'm in exams' period and some of my studies on Kno :S and i can't get it working, i contacted them and told me they're still working on a JB version :S
Thanks all
Click to expand...
Click to collapse
I'm having the exact same problem could you please post a direct link to the package that finally worked, what flags did you check in odin?
What he did was went from JB to JB for 8010 when JB to ICS did not work so he did not get it to work
Unfortunately there is no workaround when you go from JB to ICS you need to do a complete wipe to make it work
I have ATT i727 Skyrocket that was at 4.1.x and working fine for months.
I rooted the phone about 6 months ago. All OK.
Yesterday phone locked up. I pulled battery to reboot. Phone stopped at Samsung word boot screen.
I got TWRP re-installed, then gingerbread tar 2.3.5 installed. phone now works.
Will not OTA to ICS. Will download, reboot and get to 25% and fail.
ODIN says YES 2 and Custom for ROM.
I can't find a tar image of ICS and would like to reset counter to zero, maybe unroot, go back to orig. firmware and then ICS.
Please, any suggestions? Thank you.
Alan - [email protected]
Go to sammobile.com for the stock firmware
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
alanmcbride said:
I have ATT i727 Skyrocket that was at 4.1.x and working fine for months.
I rooted the phone about 6 months ago. All OK.
Yesterday phone locked up. I pulled battery to reboot. Phone stopped at Samsung word boot screen.
I got TWRP re-installed, then gingerbread tar 2.3.5 installed. phone now works.
Will not OTA to ICS. Will download, reboot and get to 25% and fail.
ODIN says YES 2 and Custom for ROM.
I can't find a tar image of ICS and would like to reset counter to zero, maybe unroot, go back to orig. firmware and then ICS.
Please, any suggestions? Thank you.
Alan - [email protected]
Click to expand...
Click to collapse
Here are som ICS TARs:
Rogers Canada (imo less bloatware than AT&T):
http://hotfile.com/dl/163303882/02796f1/
AT&T USA:
http://hotfile.com/dl/162903193/644c77d/
Telcel Mexico (someone said it has a sim lock, read here):
http://hotfile.com/dl/182237393/93f6637/
everything u need is in the sticky NEWB GUIDES To: | RESTORE TO STOCK
how did u increase your counter, its been ages since there was a tar file that did that
Hello everyone.
I have a Motorola Atrix 2 (AsiaRetail).
I was using the Leaked JB on it for a while and because of the bugs and bloatware, thought about moving to ICS.
I flash GB FXZ with RSD Lite and after that did an OTA update on it.
Then I installed BMM (through play store app) and then flashed MOKEE on SYSTEM 3.
Thats it.. !!
After that my phone was stuck at MOTO logo and whatever I tried couldn't make it to boot.
This time I downloaded the ASIARETAIL ICS FXZ file and flashed it using RSDLITE.
Now the phone boots up, flashes the Google Account signing page for a fraction of a second and then go back to lock screen.
Tried flashing it again, cleaned cache / data / factory reset through the stock recovery etc.
I was searching for a while but in vain.
Can anyone help us on this ?
SOLVED
Hi All,
Seems I have found an answer to this
If anyone is seeing this issue and breaking their head over this, please try again with SIM INSERTED.
Yes that was the EFFING problem
anooparavindp said:
Hello everyone.
I have a Motorola Atrix 2 (AsiaRetail).
I was using the Leaked JB on it for a while and because of the bugs and bloatware, thought about moving to ICS.
I flash GB FXZ with RSD Lite and after that did an OTA update on it.
Then I installed BMM (through play store app) and then flashed MOKEE on SYSTEM 3.
Thats it.. !!
After that my phone was stuck at MOTO logo and whatever I tried couldn't make it to boot.
This time I downloaded the ASIARETAIL ICS FXZ file and flashed it using RSDLITE.
Now the phone boots up, flashes the Google Account signing page for a fraction of a second and then go back to lock screen.
Tried flashing it again, cleaned cache / data / factory reset through the stock recovery etc.
I was searching for a while but in vain.
Can anyone help us on this ?
Click to expand...
Click to collapse
Dude, you should have been on ICS to flash ROMs not JB leak.
brokenaxe said:
Dude, you should have been on ICS to flash ROMs not JB leak.
Click to expand...
Click to collapse
Kexec ROMs can run on ICS as well as JB Leak Kernels.
So up until a week ago I was running CM11, but for the past month I was having battery issues so I decided to revert back to stock to test if it was the battery or the ROM. So I flash my phone back to stock and update to 4.4.2 knowing that I still had all the tools still available in case I wanted to flash back to CM11. Now today I wanted to flash back to CM11, but I wanted to make sure the methods were still correct to flash back to CM most concerning the bootloader, and to my dismay I found out that everything changed for the worse. On the bright side I was able to root my phone but unfortunately I flashed CWM recovery so now I can't get into recovery, but I can still access my phone so its not hard bricked to the point I have to JTAG, but my first question is how do I revert back to system recovery, I made a nandroid backup before I flashed the recovery but would that still work? And my second question is are there any ROMS you can install that allow you to run a custom recovery or allow you to flash back to 4.1.2? Either way, I'm glad I decided to double checks facts before proceeding or I would've had a bricked phone.
Flameancer said:
So up until a week ago I was running CM11, but for the past month I was having battery issues so I decided to revert back to stock to test if it was the battery or the ROM. So I flash my phone back to stock and update to 4.4.2 knowing that I still had all the tools still available in case I wanted to flash back to CM11. Now today I wanted to flash back to CM11, but I wanted to make sure the methods were still correct to flash back to CM most concerning the bootloader, and to my dismay I found out that everything changed for the worse. On the bright side I was able to root my phone but unfortunately I flashed CWM recovery so now I can't get into recovery, but I can still access my phone so its not hard bricked to the point I have to JTAG, but my first question is how do I revert back to system recovery, I made a nandroid backup before I flashed the recovery but would that still work? And my second question is are there any ROMS you can install that allow you to run a custom recovery or allow you to flash back to 4.1.2? Either way, I'm glad I decided to double checks facts before proceeding or I would've had a bricked phone.
Click to expand...
Click to collapse
No custom recovery and no flashing back to 4.1.2. It is safestrap only and 4.4.2 touchwiz ROMs only, of which there is only one right now. Unless you are willing to send your phone to mobile tech videos and pay them $50. They are apparently ale to revert you're phone to 4.1.2.
You should have done a little more reading of all the warnings available in the forums before going back to stock and taking the update to 4.4.2.
Sent from the Shark Tank using XDA Premium 4 mobile app
landshark68 said:
No custom recovery and no flashing back to 4.1.2. It is safestrap only and 4.4.2 touchwiz ROMs only, of which there is only one right now. Unless you are willing to send your phone to mobile tech videos and pay them $50. They are apparently ale to revert you're phone to 4.1.2.
You should have done a little more reading of all the warnings available in the forums before going back to stock and taking the update to 4.4.2.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, that answers my second question, but is there anyways to reflash the stock recovery for 4.4.2?
Flameancer said:
Ok, that answers my second question, but is there anyways to reflash the stock recovery for 4.4.2?
Click to expand...
Click to collapse
There is if you can find one, but I don't think it's posted anywhere. Your best bet is to just Odin flash a stock 4.4.2 rom and start over again.
Sent from my HTC6525LVW using Tapatalk