Database Info

[Q] Revert 6210 back to stock

Can someone help me to be sure my procedure is correct please....There are many different opinions and procedures on the Forum so I figured I would ask this question directly so I make sure I get it right.
I have a US gt-6210 that I flashed with ODIN to the UK ICS ROM (P6210XXLPL). Everything went well and I have been using it but I decided it is time to reset the tab. I have to unsolved issues with battery life and I want to start getting OS updates again....
A little while ago I tried flashing with the US ICS ROM but ended up in a bootloop so I just flashed back to the UK ROM.
I figure my best bet is to just do a factory reset and load either the factory original ROM or give the US ICS ROM another shot.
1) I want to avoid bricking my tab so what is the best way to reset to factory-I am on the Stock (UK) ICS recovery at this time
2) I don't have the original 3.2 image, is the Cellular South 3.2 (P6210UELA3) image from SamMobile the same or should I just use the Cellular South 4.0.4 ROM (P6210UELPC )
I am fine with using ODIN, I currently have the stock ICS Recovery and I am Rooted.
Thanks for help in advance....

kamishki said:
Can someone help me to be sure my procedure is correct please....There are many different opinions and procedures on the Forum so I figured I would ask this question directly so I make sure I get it right.
I have a US gt-6210 that I flashed with ODIN to the UK ICS ROM (P6210XXLPL). Everything went well and I have been using it but I decided it is time to reset the tab. I have to unsolved issues with battery life and I want to start getting OS updates again....
A little while ago I tried flashing with the US ICS ROM but ended up in a bootloop so I just flashed back to the UK ROM.
I figure my best bet is to just do a factory reset and load either the factory original ROM or give the US ICS ROM another shot.
1) I want to avoid bricking my tab so what is the best way to reset to factory-I am on the Stock (UK) ICS recovery at this time
2) I don't have the original 3.2 image, is the Cellular South 3.2 (P6210UELA3) image from SamMobile the same or should I just use the Cellular South 4.0.4 ROM (P6210UELPC )
I am fine with using ODIN, I currently have the stock ICS Recovery and I am Rooted.
Thanks for help in advance....
Click to expand...
Click to collapse
Follow my guide on pretty much anything firmware here:
http://forum.xda-developers.com/showthread.php?t=1777003

[Q] radio issues cannot make recive calls,txt,data phone on roaming mode

hi every one i dont know what to do now at this point i flashed my phone to the cyanogenmod 10.1 nightly which worked but the problem i started to have was could not send txt or calls but could browse the web on 4g so i though i would just restore from my back up of recovery image i did back to original stock which i noticed the proble still ocurred then i tried flashing to another rom called smooth liquid which now at this point it was only stuck on roaming my phone does seem to have the imei still in place, ive been reading aroud and did odin flash to stock touchwiz rom but still did not correct apparantly something messed up with the radio i went to the other forum were i woul dhave to flash the radio i tried the first one which was the lates one vrlk3 modem but when i tried to flash it in clockwork mod it gave me some error saying bad install so i attemted the one below that modem which is VRLK1 which flashed successfully but still did not seem to fix my service issue i read something about RPM on that same forum but there was many options to download i didnt know which one or if i even had to please help me someone. :crying:

Which build did you odin back to? Also did you do the reprovision code in the dialer? If not odin the F2 ICS build and put this in the dialer... *2767*3855#

x714x said:
Which build did you odin back to? Also did you do the reprovision code in the dialer? If not odin the F2 ICS build and put this in the dialer... *2767*3855#
Click to expand...
Click to collapse
the build or what it says here is COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar which is the jelly bean official ota

Flash this with odin http://goo.im/devs/invisiblek/i535/HOME_I535VRALF2_I535VZWALF2_618049_REV09_user_low_ship.tar.md5 and then in the dialer put *2767*3855# that should fix you up. Then just odin back to the K3 JB release.

ok thanks lets hope this works im trying this right now lets see what happens would it matter if im currently rooted??

droidman89 said:
ok thanks lets hope this works im trying this right now lets see what happens would it matter if im currently rooted??
Click to expand...
Click to collapse
do i have to do any radio flashing in addition to this stock rom flash?

x714x said:
Flash this with odin http://goo.im/devs/invisiblek/i535/HOME_I535VRALF2_I535VZWALF2_618049_REV09_user_low_ship.tar.md5 and then in the dialer put *2767*3855# that should fix you up. Then just odin back to the K3 JB release.
Click to expand...
Click to collapse
Thanks a million man you saved my life it worked thanks again

Youre welcome!

It Worked
I just want to say this post saved me tonight. I had searched the forums and tried everything to get my phone operational after flashing Slim's 4.2.1 ROM; which I learned I should not have done ... too late. I was stuck on roaming and no matter what I tried nothing worked until I found this post.
Thank you so much for your help.

[Q] Going to stock from cm10.1

if i want to reset my tab to factory settings, can i just flash a recent official version over my current cm10.1 with odin? will everything be as before (i want to return it)?
tia wiedster

AW: [Q] Going to stock from cm10.1
anyone?

wiedster said:
if i want to reset my tab to factory settings, can i just flash a recent official version over my current cm10.1 with odin? will everything be as before (i want to return it)?
tia wiedster
Click to expand...
Click to collapse
I'm sorry , we cannot allow you to return a device and deplete our numbers, but yes , ODIN stock rom resets everything except any personal files you might have stored on the internal storage (photos, porn, etc.)

AW: [Q] Going to stock from cm10.1
i dont know. i figure i might be able to get a sweeter deal for the money. if not, at least i know my p3110 now and can always return. would love hdmi out though.

AW: [Q] Going to stock from cm10.1
Sorry to bother you guys again.
Given the chance I ever find a german 4.0.4 rom, could I flash this over my CM10.1 right away or do I have to downgrade to CM9 first?

wiedster said:
Sorry to bother you guys again.
Given the chance I ever find a german 4.0.4 rom, could I flash this over my CM10.1 right away or do I have to downgrade to CM9 first?
Click to expand...
Click to collapse
Use ODIN to flash it directly

DigitalMD said:
Use ODIN to flash it directly
Click to expand...
Click to collapse
So to get this right.
I want to flash this firmware from Sammobile
Germany 2012 October 4.0.4 P3110XWBLH3 P3110DBTBLH2
It doesn't matter which firm im on as long as i use odin to flash this as pda? right?
sorry for not getting it straight away.

Just a quick heads up for anyone with the same problem.
I could flash the aforementioned .tar. with odin.
On booting it got stuck in a loop (of course).
I could go to recovery and do a wipe.
After reeboot everything went just fine.
cheers wiedster

[Q] Telephone is confused

GT-S7500
So I installed a custom kernel by MD-14,
Installed ICS along with it.
Telephone didnt work that well, so I wanted to get back to the stock.
I reversed the firmware with the rom backupped with CWM ( also from MD-14)
At this point Wifi stopped working.
Reflashed with the netherlands firmware, phone crashed ( didi it trough Odin, not a smart move )
Reflashed kernel to blackburners kernel and the phone works now
No network support, no wifi support, so this isnt the solution.
Phone was ordered in germany, currently downloading the europe firmware.
Is anyone in possesion of a offical kernel for this phone? or what is the way to go.
Second of all I want a fresh clean phone. can I also format everything? or doesnt that get repopulated by the firmware flash ?
greetings,
Rowan

Why the heck did you install MB-14's kernel over JB? It's only for GB!
Sent from my GT-S7500 using xda app-developers app

How to back to stock ICS 4.0.4 from OMNIROM 4.4.4 bigpart?

Hi all,
I am using OMNIROM 4.4.4 bigpart in my old EU Wingray XOOM 32GB but I have lots of performance and stability issues (browser crashes, apps freezing, very slow system....). After reinstalling it I still have problems and I want to check if it's due to the device itself...
To test that, I would like to go back to the stock Android 4.0.4 ICS that I was using in my European xoom before the jump to EOS, CM and OMNI.
Could anybody help me on how to go back to stock? Where to download the stock rom? how to remove bigpart? Is it really required to remove bigpart to install the stock rom?
Thanks for any help given.

The best way to go back to factory image is to go back to Android 3.1 honeycomb , firmware HW169
http://morningbeat.blogspot.ca/2012/02/convert-uk-or-other-motorola-xoom-to.html
once you are back to android 3.1, keep check update. until you get the latest 4.12 or stop at 4.0.4 if you wish.

valent|n0 said:
The best way to go back to factory image is to go back to Android 3.1 honeycomb , firmware HW169
http://morningbeat.blogspot.ca/2012/02/convert-uk-or-other-motorola-xoom-to.html
once you are back to android 3.1, keep check update. until you get the latest 4.12 or stop at 4.0.4 if you wish.
Click to expand...
Click to collapse
Thanks a lot for answering.
So... I have to download the original Honeycomb software, "reflash it" and update until I get 4.0.4 or 4.1.2 ...
My doubt is ... do I have to "undo" the "bigpart"? Or will the stock firmware install perfectly in my "bigpart" xoom?
Thanks!

the bigpart issue I am not to sure of

Of course you need to undo BigPart. It's well document in Xoom Android development section of this forum.
You need to flash the non-big-part TWRP (2.8.0 or other), wipe everything, reboot intot TWRP, format Data, wipe everything again, reboot into TWRP again. Then you can flash original image using fastboot.

Just to stick my nose in, (and go slightly off topic) have you tried My Android Jellybean 4.2? before you go back to honeycomb you might want to give it a go, runs very smooth and very few bugs (if any!)

machina77 said:
Just to stick my nose in, (and go slightly off topic) have you tried My Android Jellybean 4.2? before you go back to honeycomb you might want to give it a go, runs very smooth and very few bugs (if any!)
Click to expand...
Click to collapse
... Sorry

jkd said:
... Sorry
Click to expand...
Click to collapse
Eh?

I didn't find anything in forum, could somebody help me how can i go back from bigpart to stock partition?

I tried to go back to stock last month and it was a nightmare trying to get it to boot back after the update. My only advise is to leave the thing alone. Or do a wipe in twrp or cwm. BTW, I still can not get my device to boot or enter recovery after my dumb ass tried to get back stock firmware.

nomadman said:
I tried to go back to stock last month and it was a nightmare trying to get it to boot back after the update. My only advise is to leave the thing alone. Or do a wipe in twrp or cwm. BTW, I still can not get my device to boot or enter recovery after my dumb ass tried to get back stock firmware.
Click to expand...
Click to collapse
I just flashed mine from omni bigpart back to stock 3.1 cause my 1yr old daughter can't keep her hands off my phone...was time consuming researching how to do it. But it works perfectly...I wound up running some script somebody wrote and it pretty much did everything for me... not in front of my PC at the moment but if you are still fighting it PM me and I'll give ya everything you need...