GT-S7500
So I installed a custom kernel by MD-14,
Installed ICS along with it.
Telephone didnt work that well, so I wanted to get back to the stock.
I reversed the firmware with the rom backupped with CWM ( also from MD-14)
At this point Wifi stopped working.
Reflashed with the netherlands firmware, phone crashed ( didi it trough Odin, not a smart move )
Reflashed kernel to blackburners kernel and the phone works now
No network support, no wifi support, so this isnt the solution.
Phone was ordered in germany, currently downloading the europe firmware.
Is anyone in possesion of a offical kernel for this phone? or what is the way to go.
Second of all I want a fresh clean phone. can I also format everything? or doesnt that get repopulated by the firmware flash ?
greetings,
Rowan
Why the heck did you install MB-14's kernel over JB? It's only for GB!
Sent from my GT-S7500 using xda app-developers app
Related
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Today I tried to install .. and installation and start at about 15% said that everything is ok successfully installed and reset the mob stuck on lg logo
what to do please help
Try this:
http://forum.xda-developers.com/showthread.php?t=1244490
not so in general .. I went through zipa on the SD card ..
I hold power and volume, and when I go to open the instal rom from sd
sombadi help plz
It's the same problem as mine . But me 27 % stuck in it .
I tried smart flsher and it worked . I do not how did it do it . but it worked . And now my phone ICS
Sent from my LG-SU760 using xda app-developers app
Zlocesti said:
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Click to expand...
Click to collapse
first of all you have to change the BASEBAND and the ROM.
FLASHING ZIP ROM with CWM will NOT change your ROM from version to version (2.2 ->2.3 -> 4.0) !!!!
Once you install OVER THE COMPUTER your ROM (in KDZ or FLS+BIN) then you can play with custom roms.
so if you did this before install Acura ICS rom then proibabvly you lost you IMEI.
this check when you write on your dial pad *#06#
if it is empty - you should restore it - check the developer section how to do that.
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Zlocesti said:
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Click to expand...
Click to collapse
If you want to install gingerbrad ROM's you must update your phone to gingerbread, you can do this with official LG program or with kdz installer http://forum.xda-developers.com/showthread.php?t=1287236 and then install rom.Or if you want to install xbsall ICS port go http://forum.xda-developers.com/showthread.php?t=1956347.
Gutted Mate!!
But you Cannot UPGRADE from GingerBread ( Thats what you Had on phone originally ) To ICS through your phone using Clockwork Mod
your phone will try, but you will just end up confusing it like you have done,
http://forum.xda-developers.com/showthread.php?t=1956347
follow this thread and read every post from Page 1, then read all post in links to other helpfull threads like this one
http://forum.xda-developers.com/showthread.php?t=1244490
i found this helped
http://forum.xda-developers.com/showthread.php?t=1942836
but tbh i cant really stress enough,, that you need to read read read lol,, and if still not sure read some more :good:
Good Luck buddy
ive recently got the p920 and it was locked to orange so ive unlocked it but now i want to get rid of the orange bloatware. I have now rooted and installed CWM recovery and have attempted to install a stock rom now heres were my problem starts the rom installs fine but there baseband doesnt so i dont get a signal ect. so my question is have i done summit wrong when installing from zip in recovery?
Any help with this would be great thanxs.
You mean that your mobile running 2.2 and you install a costum rom (.zip) ??
This costum rom may be a gingerbread rom so you must upgrade your phone officially before flashing costem rom .
Sent from my LG-P920
choose your most appropriate firmware > http:// lg-phone-firmware .com/ index.php?id_mod=2 (remove the spaces)
follow the tutorial > http://forum.xda-developers.com/showthread.php?t=1473781
im currently on android 2.3.5 n software version has V20D in it so which would be best for me to use?
is there a stock v20d firmware that i could use as i cant seem to find one as i need one to be compaitible with my baseband as i dont feel comfortable flashing basebands
enemyrex said:
ive recently got the p920 and it was locked to orange so ive unlocked it but now i want to get rid of the orange bloatware. I have now rooted and installed CWM recovery and have attempted to install a stock rom now heres were my problem starts the rom installs fine but there baseband doesnt so i dont get a signal ect. so my question is have i done summit wrong when installing from zip in recovery?
Any help with this would be great thanxs.
Click to expand...
Click to collapse
can you see your IMEI?
which baseband you have?
Which rom version you have?
p-vlad said:
can you see your IMEI?
which baseband you have?
Which rom version you have?
Click to expand...
Click to collapse
yes i can see my imei number
my base band is L6260_MODEM_SIC_01.1042.00
software version LG920-V20D-JUN-27-2012
android version 2.3.5
this is an orange based rom n would like to have it on stock
there is different stocks on different times (first was v10a)
this is not your base band This is INFINEON stuff.. go to market place and take GetRIL
Install. Run, See your base band version.
You can also isntall from there the recommended RIL for your configuration. Wait a minute (do not exit the program). if you do not have still signal - then RESTORE RIL back from the program (the program make a backup of you RIL when you install new one)
I've tried that getril and it said baseband matched but still no imei number once I've installed a custom/stock Rom. Looks like ill have to keep the orange Rom
Sent from my LG-P920 using xda premium
IMO getril is pretty useless and most of the time you're better off when they don't match.
Why are you uncomfortable flashing a baseband? Its not as simple as a zip and can be a pain but once you get it, you have so many more options.
Sent from my LG-SU760 using xda app-developers app
im used to htc phones n iphones n have never done anything with lg mobile hence the not wanting to do the baseband
I flashed JB on my gt-n8013, and then i wanted to return back to ICS as Kno doesn't want to run. So i downloaded the GT-N8013 from Sammobile and flashed it in.
But when it's rebooting it's kept hanging on Samsung logo and doesnt want to run. what can i do. Help please
http://forum.xda-developers.com/showthread.php?t=2080366
try re-flashing.. or re-downloading the file... it might be corrupted
Well you need to boot into recovery and do a comple wipe unfortuantely you will lose all data
I would suggest to you that if you redownload the rom and it still does not work then you should try out a different rom, because it seems like you may have downloaded a rom for a similar tablet and now find yourself running into issues.
Sent from my GT-N7100 using xda premium
I Reflashed again JB UK 4.1.1 and it's working fine, but i can't switch back to ICS GT-N8013. I'm in exams' period and some of my studies on Kno :S and i can't get it working, i contacted them and told me they're still working on a JB version :S
Thanks all
Boot to recovery Factory reset .
Flash stock ICS rom via Odin .
jje
You will loose ALL data on internal card so back up before doing this...
AbdallahSaied said:
I Reflashed again JB UK 4.1.1 and it's working fine, but i can't switch back to ICS GT-N8013. I'm in exams' period and some of my studies on Kno :S and i can't get it working, i contacted them and told me they're still working on a JB version :S
Thanks all
Click to expand...
Click to collapse
I'm having the exact same problem could you please post a direct link to the package that finally worked, what flags did you check in odin?
What he did was went from JB to JB for 8010 when JB to ICS did not work so he did not get it to work
Unfortunately there is no workaround when you go from JB to ICS you need to do a complete wipe to make it work
I am not a pro at installing android os. I am 16. I recently installed Cyanogenmod 10 (Android 4.1) on my phone (LG Optimus One) and I can't call. I use Simple Mobile. Whenever I try to call, it says,"Mobile Network not available". If you don't know a way to fix this. Can you show me how to put it back into Froyo 2.2?
Seems you are on old baseband and you have flashed a rom which is based on new baseband. Just search for ' old bb fix ' and flash this from your recovery. You will get back your network.
Sent from my LG-P500
pmvyas said:
Seems you are on old baseband and you have flashed a rom which is based on new baseband. Just search for ' old bb fix ' and flash this from your recovery. You will get back your network.
Sent from my LG-P500
Click to expand...
Click to collapse
How do I do that tho? Please help me. And I don't have google play on this. But the video says that I can get it from here: h t t p: // w w w. g00(dot)im/ gapps . But idk how. This is really confusing.:confused
search XDA for oldbb fix, it is a flashable zip
here in adfad's post you'll find it http://forum.xda-developers.com/showthread.php?t=1444328
Download the old bb fix from here -
http://forum.xda-developers.com/showthread.php?p=39893089
Boot to your recovery and flash the zip file to fix your network issue. :thumbup:
Sent from my LG-P500
help again plzz
How do I boot to recovery without the clockwork thingy ?
How did you flash the cm 10 rom? Use the same recovery.
Sent from my LG-P500
pmvyas said:
How did you flash the cm 10 rom? Use the same recovery.
Sent from my LG-P500
Click to expand...
Click to collapse
Nvm, I got it. I have the same problem for the Galaxy S2 model t989 too. It dropped in the water, then it can't read the sim card. So can you give me a link to old bb fix for S2 T989 plz? Thank you.
Ok, apparently, I installed a different old bb fix and now that doesn't work , then I installed the one you gave to me but then it didn't work. So I am stuck again. Please help.
goto settings, abouth phone and read what is your baseband, if it's v10 that is old, if its v20 it is new,
if it is old update via LGMDP to latest version 2.3 GB(if PC doesn't recognize your phone, boot into recovery, conect usb cable an from advance/mounts mount usb), install, reboot, now you'll have fresh oficial GB, root with Superoneclick latest version(maybe you will need to do it few times, for me it didn't go first time, if I remember it was at 3rd time or so), install CWM trough RomManager and after that you are good to go with what ever you want to put in that phone, anyway, all ccustom roms from 2.3.7 are for newbb
So, after hours of looking for the stock rom for my Samsung galaxy S ( I don't know which one it is.. It just says samsung at the top and bottom) I found a gingerbread rom, and I flashed it to my phone via Odin. I reset the phone, and I no longer had my 3g, and my phone number says "Unknown". I installed Froyo 2.2.2 before this, and it was working perfectly, except that wasn't the stock that I was looking for, and so that was the reason I flashed the gingerbread ROM.. If anyone could help me, it'd be a big help.
~EPIKHBK1
aww Cmon.. :crying:
No one?
Probably something went wrong with the modem flash. The stock rom contained the modem for the rom itself? It happened to me on a galaxy ace. I flashed a 4.0.4 rom and then i lost the signal (only 3g/2g, not the wifi). Then I flashed a custom rom based on the original one and now everything works. Try to search the official rom for your device on sammobile.
:/
Well, I've spent days looking for the stock ROM :/ I couldn't find the one for mine..
You said install a custom ROM? won't that require a ROOT?
I can't find my model, "SCH-I500" on sammobile.
Ok, I installed http://www.mediafire.com/download/c7h1wl5wne51duf/ed05_radio.tar.md5.. so I'm able to send/recieve calls, but I still don't see "3g network" icon on the top of my phone, meaning that I don't have 3g..
anyone??
...
Rage..
Eh..
guys... Help me.