Hello, where I work purchased an atrix 2 with a broken digi and we ordered a replacement to repair it. When the digi came in we noticed it had "confidential motorola property not for resale" on the side with a number beside it. It works fine it's just kinda weird/cool
I'm just looking for more information on how it could have gotten out and the part itself, etc.
http://db.tt/lEp9wwS7
http://db.tt/hjOBGmnY
Looks like an early run of the hardware.
The Motorola and AT&T logo placement is the same as the photos that leaked when the device passed the FCC.
Me too...
I just received my replacement digitizer and the screen is almost identical, besides the different number.
After you installed did you now have a "lip" around the screen... It almost appears to have thinner glass than the original glass.
Also, my digitizer and LCD seem to be touching in one spot. Not sure if defect or installation error.
Thought i might have missed a step when re-installing... help?
I'm trying to change the glass digitizer on my phone, i'm also keeping the old frame, but when the glass was changed the notification bar was scrolling randomly as if a multi-touch was happening? any idea of what the cause could be. The phone is running stock rom and the adhesive used is lepage gel epoxy
When I changed only the digitizer, I never used glue to put it back... never had a problem with the touch.
I had just changed one with one that had an lg logo. It had these dots with connecting lines you could see when the light reflected on it. That digitizer had some issues with the touch scenceativity. I replaced it with one with a T moble logo, there were no dots or lines in it and it works like it was a new phone. I used a double stick tape to install them it holds good and if you have to remove it for some reason it is easy to heat with a hair dryer and ease off without breaking it. I guess I just got a bad one at first (lg logo one). Otherwise it was not much of a problem to change. The seller did refund 1/2 the cost of the lg logo one so I guess that was fare It works just not as responsive as the other.
Sent from my LG-P999 using xda premium
I managed to break the screen on my Optimus 3d last night, not sure if it was dropped or ran over. I found it face down in my driveway this morning and to my horror when I flipped it over the screen was completely smashed, however the phone is still working fine, minus the never ending ghost call issue.
What make the situation worse is Rogers just sent me out a replacement phone yesterday and I have to send this one back, in the next couple days.
So I called a repair centre and they wanted $190 to repair the phone, and stated they would need to replace the LCD and the glass screen. I know there is nothing wrong with the LCD screen, phone functions and all colours are good, just has broken glass.
My question is, can I repair just the glass without replacing the LCD? I have found the screen for around $30 on ebay. Based on watching the how to on youtube it doesn't look like too difficult of a job.
me too i have broke my glass of my phone and they said like your prize to replace thre glass but in my country crunncy and the screen work perfectly I don't know why they want to change the screen too it's annoying
Sent from my LG-P920 using xda app-developers app
n3fta said:
I managed to break the screen on my Optimus 3d last night, not sure if it was dropped or ran over. I found it face down in my driveway this morning and to my horror when I flipped it over the screen was completely smashed, however the phone is still working fine, minus the never ending ghost call issue.
What make the situation worse is Rogers just sent me out a replacement phone yesterday and I have to send this one back, in the next couple days.
So I called a repair centre and they wanted $190 to repair the phone, and stated they would need to replace the LCD and the glass screen. I know there is nothing wrong with the LCD screen, phone functions and all colours are good, just has broken glass.
My question is, can I repair just the glass without replacing the LCD? I have found the screen for around $30 on ebay. Based on watching the how to on youtube it doesn't look like too difficult of a job.
Click to expand...
Click to collapse
If your LCD is working you only need the digitizer replaced (phone front + touch screen) which costs you around 20/30$ http://www.ebay.com/itm/Replacement...080?pt=LH_DefaultDomain_0&hash=item1c2d78e968 .
My touchscreen was broken (randomly pressing things on the screen) and I think the 2nd hand shop I got it from only replaced the digitizer I think based on the small dust I see on my screen.
This only works if your LCD doesn't show blurry or (partially) black (damaged).
I've peaked around eBay and I found a few different digitalizer plus LCD replacements. What's the difference between g23 and 710d? I can seem to find either of those numbers on my phone box. Also how hard is it to replace the entire screen?
I have some experience with this. Either replace the digitizer/lcd assembly or sell the phone and get a new one. It's possible to replace just one, but it will always look like **** when you're done, and it's not just a matter of ungluing the two layers.
If you are willing to buy a new assembly, is actually a lot easier than I thought it would be. Make sure you work in a clean area. Also, be sure to get the att screen. The international one does look cooler with its HTC logo, but it's not a perfect fit. What that means is a lot of light bleed on the edges and capacitive buttons not lighting up at all.
Best of luck either way!
Viper Rom, baby!
I've replaced mine 3 times so far. The first time you replace it , it WILL be a major pain more than likely. I recommend you find a GOOD video on YouTube or something and follow it closely. (Careful there are a lot of videos that are just atrocious..). Also as stated, get the full assembly for LCD+digitizer and to be safe, get the one with at&t logo. I have heard that the international one works but the fit might not be perfect. Anyway, good luck.
Sent from my One X using xda premium
Does anyone have a reliable source for the at&t screen?
Thanks.
sheik124 said:
Does anyone have a reliable source for the at&t screen?
One X AT&T logo replacement screen
etechnotics.com/touch-screen-glass-digitizer-replacement-for-htc-one-x-s720e-htc-at-t-logo.html[/url]
Click to expand...
Click to collapse
shanar585 said:
sheik124 said:
Does anyone have a reliable source for the at&t screen?
One X AT&T logo replacement screen
etechnotics.com/touch-screen-glass-digitizer-replacement-for-htc-one-x-s720e-htc-at-t-logo.html[/url]
Click to expand...
Click to collapse
Unfortunately, that's just the digitizer :/ We need the digitizer + LCD.
I can't find a reliable source of the entire assembly. Debating getting both of these and putting it together myself:
http://www.etradesupply.com/htc-one-x-digitizer-touch-panel-with-at-t-logo.html
http://www.etradesupply.com/htc-one-x-lcd-screen.html
Click to expand...
Click to collapse
htc one x lcd & diditizer
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=170992426980
This one is AT&T and has capacitive light redirection things. The only one I bought that came with that
Also eBay has all the tape u need for LCD to frame, LCD to digitizer, and one for the digitizer to frame
May want to read this thread before buying an lcd. http://forum.xda-developers.com/showthread.php?t=2164760
Sent from my One X using Xparent Green Tapatalk 2
capacitive light
I would really like to figure out what these are called and were to get them.
these came with my LCD&digitizer from eBay. my last post above
billb23ok said:
I would really like to figure out what these are called and were to get them.
these came with my LCD&digitizer from eBay. my last post above
Click to expand...
Click to collapse
Have you installed the screen yet? I'm doubtful that it will fit in the AT&T/Telstra model.
thecoolestcow said:
Have you installed the screen yet? I'm doubtful that it will fit in the AT&T/Telstra model.
Click to expand...
Click to collapse
I havnt tried to turn it on but it says AT&T and the prefit looks nice. I will keep you up to date after I get the other parts and I put it together. The battery is dead at the moment
billb23ok said:
I havnt tried to turn it on but it says AT&T and the prefit looks nice. I will keep you up to date after I get the other parts and I put it together. The battery is dead at the moment
Click to expand...
Click to collapse
Any updates here? If you've installed it, how's the fit, do the capacitive buttons work, and is the contrast/sharpness correct?
thecoolestcow said:
Any updates here? If you've installed it, how's the fit, do the capacitive buttons work, and is the contrast/sharpness correct?
Click to expand...
Click to collapse
OK so the first phone I got wouldn't work with any screen. Problem cause it wouldn't. Turn on from the beginning. The second phone came. I plugged in LCD with green cable said at&t at top from source above and it wouldn't turn on so I plugged in another one from the source above it had a yellow cable said htc and the Sony one that ssid I had also turned on. The HTC ones seem to be slightly smaller but after I put the sticky tape I think it will all be OK. I just have to do it rite. Also, both screens from supplier above look remanufactured cause they both have black tape and the digitize seem to me to be thinner / glass not so thick. But they come with good black paint and light redirect things for soft buttons. So in short. Buying from him is unpredictable. As I got to different. Screen types. I have only bought two from him. I will post a picture after I assemble the phone today
So I got some good news for my Att version. I ordered this one:
http://www.ebay.com/itm/OEM-Full-LC...low-Green-Flex-For-HTC-One-X-XL-/360612529957
1. its not a sony, its a sharp. Its yellow on one side and full green on the other.
2. mine came with a sony screen. I killed my old screen getting it off (just lights up white). I booted my phone with the old sony screen, waited till the phone went to sleep, then swapped the screens. The sharp screen fired up just fine.
3. This was a perfect fit with the HTC logo. the ambient light sensor lined up, and it has light guides that line up. Also there was not the 2mm gap with the international versions.
4. One problem. The "holes" in the touch panel where the misaligned light guides/buttons are still there. So you will see the leds on the botton assembly when they light up. I recommend painting the blank spots over with a few layers of black paint.
I think what is happening is the international version has the buttons directly over top the led bar and does not use light guides.
Hello,
This all started when I got my first smartphone. I had three HTC Incredible 2s due to WiFi issues. Fast forward to my macbook, white spots on the screen. Upgrade time, I went through 4 repairs on a Razr HD due to dirt upset the glass and burn in. Sold it, bought an s3. Uneven colors and dirt again. Traded to a droid DNA. Had dirt under the screen. Sent out for repair like 10 times. Dead pixels, stuck pixels, blue dots, broken ports, etc. sold it for an LG g2. The g2 had multiple white dots from pressure, so I sold it and went back to a different DNA. this one has a really dark backlight on the lower left corner. My first iPod had white dots, the second one had metal shavings under the screen. Sold it. Went to the iPod touch 5, had random dark banding, new one is fine. MacBook pro has dirt under the glass but not much, and it can be cleaned. Tried out the nexus 7 2013 and both had dead/stuck pixels and banding. I got the Xperia Tablet Z and the first one has a green piece of dirt or plastic under the glass and uneven screen tint. The second one has 7-10 stuck pixels and severe backlight bleed. My old LCD tv had stuck pixels, my new one I went through 3 before getting one without severe banding, but it has lots of clouding and backlight bleed. My monitor has a stuck green sub pixel. Am I just unlucky? Seriously wondering this. I'm debating on giving the Xperia tablet z one more exchange...
Sent from my HTC6435LVW using XDA Free mobile app