My xperia arc s bricked with installing custom rom,
tried flashing using flashtool but flashtool also stuck at "Device connected in Flashmode"
my device is locked bootloader, rooted and cwm installed,
Please help me...
junaidtahir said:
My xperia arc s bricked with installing custom rom,
tried flashing using flashtool but flashtool also stuck at "Device connected in Flashmode"
my device is locked bootloader, rooted and cwm installed,
Please help me...
Click to expand...
Click to collapse
watch this http://www.youtube.com/watch?v=hPPWRXcsz7g
Hit thanks if it help you
Thnaks for reply but.....
borakx said:
watch this http://www.youtube.com/watch?v=hPPWRXcsz7g
Hit thanks if it help you
Click to expand...
Click to collapse
already trying this but in flashtool when it says "connect your device in flash mode" i connected in flash mode and flash mode shows that device is connected in flash mode but nothing happen then and after few seconds device power off automatically. I think my device is in MTP mode as flashtool say your device should not in MTP mode, is there any way to change mode using flashtool or any other method?
Maybe useing SEUS?
junaidtahir said:
already trying this but in flashtool when it says "connect your device in flash mode" i connected in flash mode and flash mode shows that device is connected in flash mode but nothing happen then and after few seconds device power off automatically. I think my device is in MTP mode as flashtool say your device should not in MTP mode, is there any way to change mode using flashtool or any other method?
Click to expand...
Click to collapse
Is your phone stuck at the Sony Bootloop?
If so the method that i've give you might work!
Which version of flashtools that use?
Related
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
You need to connect your phone is flashmode
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
elroyjolew said:
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
Click to expand...
Click to collapse
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Knightfuryz said:
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Click to expand...
Click to collapse
elroyjolew said:
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
Click to expand...
Click to collapse
Make a factory reset
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
how to connect in flashmode without using the buttons?im stock in sony logo and i need to turn on usb debugging to use flashtool
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Nikhil kuttu said:
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Click to expand...
Click to collapse
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Manas1796 said:
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Click to expand...
Click to collapse
the drivers will be on the flash tool folder just open the app then tick drivers for Xperia L (thoshan) and general fast boot drivers.
and use the latest flash tool if you can ( Now I am using a Mac so I have a flash tool which was made for apple. but I used to flash my phone using windows and this is the version of the flash tool "flashtool-0.9.18.5" and this worked fine for me ).
if anything else is needed just reply
i got sony z3 d6633 dual sim rebooting after flash with flashtool ftf file its cricked no chance to be flashed again n on device manager its just recobnized as "somc flash mode"
any idea to fix it guys?
thx in advance
hey guys no help at all?
Try if you can boot it in fastboot mode. If that works flash a original Sony kernel (you can get that from your ftf) using fastboot (don't worry as long as it's an original Sony kernel you can flash it without unlocking).
After that try flashing your complete firmware again and let us know if it worked.
sorry no fastboot mode fone is dead neva wake up just somc mode on usb
flashmode problem
bro,
in my xperia z3 dual d6633.....i tried to boot into flashmode the mobile led blinks green light... but pc does'nt recognize it. i have installed driver also but no detection in pc... and mobile can be connected and detected by pc in fastboot.. but can't do anything in fastboot else... pleaes help me....thanks in advance
I used flashtool to unlock the boot loader. I cannot flash the stock version because somehow the debugging option have been disabled. My handset was "boot looping" now it is stuck on the "SONY" Logo when I try to boot which happened after I tried flashing. I don't know much about Android. Whatever I tried was out of curiosity and suddenly things went wrong. I do have Android SDK in my Computer. Is there any way to flash the stock version ???
CHRISTINITTY said:
I used flashtool to unlock the boot loader. I cannot flash the stock version because somehow the debugging option have been disabled. My handset was "boot looping" now it is stuck on the "SONY" Logo when I try to boot which happened after I tried flashing. I don't know much about Android. Whatever I tried was out of curiosity and suddenly things went wrong. I do have Android SDK in my Computer. Is there any way to flash the stock version ???
Click to expand...
Click to collapse
usb debugging is NOT relevant for flashmode
output battery.... input....
(do not start the phone or anything else)
do all steps on flashtool flash until it tells you to connect the device in flashmode...
hold vol - and connect to pc....
Sent from my Xperia T using XDA Free mobile app
Will you please take a look at the thumbnail which I have attached?
CHRISTINITTY said:
Will you please take a look at the thumbnail which I have attached?
Click to expand...
Click to collapse
it seems ok?
Sent from my Xperia T using XDA Free mobile app
The second info from the last says that for flashtool unknown sources and debugging should be selected in the phone.
CHRISTINITTY said:
I used flashtool to unlock the boot loader. I cannot flash the stock version because somehow the debugging option have been disabled. My handset was "boot looping" now it is stuck on the "SONY" Logo when I try to boot which happened after I tried flashing. I don't know much about Android. Whatever I tried was out of curiosity and suddenly things went wrong. I do have Android SDK in my Computer. Is there any way to flash the stock version ???
Click to expand...
Click to collapse
Bro everything is OK and the process was successful ( I saw the attachment image).
The whole thing is that you didn't wait for booting, it will take some time for booting after flashing the stock ftf .
So wait for it, it would take about 10 min in max.
I tried to Jailbreak my Xperia E3 with a locked bootloader with the instructions found on this thread: http://forum.xda-developers.com/xperia-e3/general/root-xperia-e3-d2203-locked-bl-t3075559
After flashing the new kernel, I am greeted with a dissapearing boot logo. PC Companion cannot recognise my device, despite being able to before flashing the kernel. When I try to connect my phone via usb, I always get a connection error from pc companion asking me to restart my phone and try again when it tries to install the adb drivers
Apparently, this problem can be fixed this by switching to mass storage mode, but how can I do this if my phone can't even turn on? :crying:
Please help
Texturiser said:
I tried to Jailbreak my Xperia E3 with a locked bootloader with the instructions found on this thread: http://forum.xda-developers.com/xperia-e3/general/root-xperia-e3-d2203-locked-bl-t3075559
After flashing the new kernel, I am greeted with a dissapearing boot logo. PC Companion cannot recognise my device, despite being able to before flashing the kernel. When I try to connect my phone via usb, I always get a connection error from pc companion asking me to restart my phone and try again when it tries to install the adb drivers
Apparently, this problem can be fixed this by switching to mass storage mode, but how can I do this if my phone can't even turn on? :crying:
Please help
Click to expand...
Click to collapse
Didn't really get what you need help with.
Well, you cannot practically install adb drivers at the point where you are.
What you should do is connect your mobile in the fastboot mode (Volume up button while connecting usb cable) or flash mode (Volume down button while connecting usb cable). And maybe install fastboot (bootloader) drivers or flash (SEMC flash device) drivers.
Then maybe flash a ROM through which you could restore your backup which you hopefully made.
Hope that helps.
flash a stock rom via flashtool..
can some one please help me ...:crying::crying::crying:
What happen?
use EMMA ou SEUS (windows) or sony bridge (mac) to repair phone
e3 d2202 wont connect into flash
vincy009 said:
What happen?
Click to expand...
Click to collapse
hello im new
i have xperia e3 d2202 and now stuck on logo
i tried flashing but fails,, my phone wasnt recognized in my pc (The LED lights Green but nothing happens).
The phone connects in Fastboot(with blue LED) and is recognized in Flashtool
can u help me ?
luci morningstar said:
hello im new
i have xperia e3 d2202 and now stuck on logo
i tried flashing but fails,, my phone wasnt recognized in my pc (The LED lights Green but nothing happens).
The phone connects in Fastboot(with blue LED) and is recognized in Flashtool
can u help me ?
Click to expand...
Click to collapse
yeah flash it trough flashtool if its detecting in flashtool its easy check tutorial here or Google it
vincy009 said:
yeah flash it trough flashtool if its detecting in flashtool its easy check tutorial here or Google it
Click to expand...
Click to collapse
yes i have done
i follow instruction how to flash xperia e3 d2202.
I've already downloaded what needed ( file .ftf, drivers, and flashtool)
i use flashtool 0.9.18.6 version
when i press volume - then connect usb cable , the green led indikator turn on but no respond and not recognize on my pc
if i press volume +, my pc recognize it and at fastboot mode
plis help me
luci morningstar said:
yes i have done
i follow instruction how to flash xperia e3 d2202.
I've already downloaded what needed ( file .ftf, drivers, and flashtool)
i use flashtool 0.9.18.6 version
when i press volume - then connect usb cable , the green led indikator turn on but no respond and not recognize on my pc
if i press volume +, my pc recognize it and at fastboot mode
plis help me
Click to expand...
Click to collapse
Press Win key+R, type devmgmt.msc and press enter.
You will see the list of devices connected to your PC. If you connect your phone and your PC recognizes it, the list will refresh.
Try to see if the list refreshes when you put your D2202 into flash mode (with the green LED).
If it refreshes, look if a new device has appeared in any menu.
rmnhg said:
Press Win key+R, type devmgmt.msc and press enter.
You will see the list of devices connected to your PC. If you connect your phone and your PC recognizes it, the list will refresh.
Try to see if the list refreshes when you put your D2202 into flash mode (with the green LED).
If it refreshes, look if a new device has appeared in any menu.
Click to expand...
Click to collapse
thanks for advice
still wont connect
green led has turn, but my pc or even in device manager still no respond
its hardware problem ??
luci morningstar said:
thanks for advice
still wont connect
green led has turn, but my pc or even in device manager still no respond
its hardware problem ??
Click to expand...
Click to collapse
Maybe but I don't know becouse if USB doesn't work fastboot mode wouldn't connect, but it is connecting.
You have to flash a rom through fastboot mode, so you need to find system.img and boot.img from stock rom of a D2202 (unfortunately I have D2203 variant so I can't backup my phone, but I can help you findind the files on XDA) and flash it though flash tool.
You can also try to download an ADB toolbox and run the command:
fastboot erase userdata
(this command will remove all your apps' data but can fix your issue)
rmnhg said:
Maybe but I don't know becouse if USB doesn't work fastboot mode wouldn't connect, but it is connecting.
You have to flash a rom through fastboot mode, so you need to find system.img and boot.img from stock rom of a D2202 (unfortunately I have D2203 variant so I can't backup my phone, but I can help you findind the files on XDA) and flash it though flash tool.
You can also try to download an ADB toolbox and run the command:
fastboot erase userdata
(this command will remove all your apps' data but can fix your issue)
Click to expand...
Click to collapse
flash via fastboot ? tell me how to do that ...
ill try, thnks you
luci morningstar said:
flash via fastboot ? tell me how to do that ...
ill try, thnks you
Click to expand...
Click to collapse
Try these steps
Follow this guide to install ADB toolkit.
Then open Sony Flashtool and select the XF icon.
Find Xperia E3 and select D2202 variant. In the right panel you will see a lot of entries with countries and telephone companies, select one and click in the field of "Available firmware:". Download the rom.
When it finishes, close XperiFirm. Click on thunder icon, select Fastboot mode, connect your phone off with vol + pressed (blue LED) to the PC and then press on Select system to Flash. It will ask for a sin file. You have to select a system_....sin, which is in C:\Users\(your user profile folder)\.flashtool\firmwares\Downloads\D2202_...\
and let process finish.
Then press on Select kernel to Flash and select, in the same folder as before, a file called kernel_....sin
When it finishes you can disconnect your pone and try to power it on.
I have a Xperia E3 D2212 and I made the whole process, the problem is that I could not increase the storage memory and FlashTools no longer recognizes my cell phone as a D2212, it recognizes as a D2203, this is because it changed the Kernel in TWRP . Would you like to go back to the Original Kernel ??