Related
I ordered a tpu case + screen protector for ebay , great price only £1.95 delivered.
I am not bothered about the screen protector, as i have a pack of seven full lenth ones on order, it`s more to get the seller to send the right screen protector for other buyers.
Now the tpu case is great, but the screen protector is too small, in both leanth and width, It`s only 110mm x 55mm , and the top and bottom are slightly rounded, as are the corners, I emailed the seller and this is the reply, see below.
Also is the sensation screen not totally flat?
Thanks
John.
Click link below too see screen protector rested on sensation.
http://i42.photobucket.com/albums/e306/policeman999/screenprotector.jpg
Hi
Thanks for contacting us. We have been informed by our suppliers that we have been supplied the correct size screen protector for the HTC Sensation. The screen protectors are designed to be smaller than the screen. It is due to screen on the Sensation not being completely flat, it is slightly raised at the edges, a bit like a plate. If the screen protector were the same size as the screen it would not stick correctly.
The size you should have been sent is 107mm x 55mm. If you have a different size to this it is possible that you have been sent the incorrect one, in which case we apologise and will send the correct size for your phone.
Please could you let us know so we can resolve this issue for you.
Click to expand...
Click to collapse
I got full size screen protectors from ebay, and due the curved screen it didn't attach correctly, and peel off very quickly.
If you want full screen protector, you need to look for the ultra thin and ultra clear ones.
they are very thin and can be molded to follow the curve of the sensation screen.
Yeah, I have a pack of seven of the recommended ones, coming from the US , the ones you heat up with an hair-dryer.
John.
Try to search up iShieldz, by far the best screen protector, wet apply but covers every inch. Try to find it on ebay or an online site ?
I got some from ebay which are a bit short and only cover the flat part of the screen. They do the job and the edges can only be seen when the the screen is off.
I also noticed that some supply protectors that are smaller than needed and my first one I got with case was same...
But later I got this one: http://www.ebay.co.uk/itm/220921502767?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 from fleabay and it was correct full size. I thought it might be hard to apply at first, but it went rather smooth, after removing top protective layer I was able to go around the edges and it curved in perfectly, now is full size of screen.
I'm currently using the matte full screen
it is slightly smaller than the screen, I was only able to "curve" the protector in 2 corners, the other 2 now has bubble and won't stick to the screen at all (one at the search button, the other one a the HTC logo) it's not that bad, just ugly
I used to have the Zagg shield on it, used it for awhile, then got annoyed by the feel of it, not the best touchscreen experience... kinda squeaky, not as smooth as traditional flat protector, but it does the job well, cover every millimeter on it
are the official ones from HTC full screen size?
enjoy this one.
Genuine SP P540 Invisible Screen Protector for HTC Sensation
perfect size!
ishieldz is the same as CParmor™ and Zagg™ ones "Made from military grade material used for protecting helicopter rotor blades"
i've used Terrapin screen protectors - they're pretty good and the right size, etc, the only problem is they are not matte
The material is the same in theory... but ive used all three, iShiedz has a enormous difference. No rainbow effect after installing and orange peel effect. As well, no scratching. I got 4 Zagg's, all had that problem. Never again. Now im good
Try these http://www.ebay.co.uk/itm/190552613736?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
You also get MATTE but only x3 not x6 same price
^^^^^^
[I can not quote the link, I write the link of the post above me.]
Very good.
I ordered.
It is recommended
+1
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..
I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600
gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ
I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk
I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Amazon Mr Shield For Huawei Mate 9
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...
Try full covdr
I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk
Has anyone purchased a tempered glass screen protector for this phone that they like?
Most of the ones I have looked at on amazon have complaints that they interfere with the fingerprint scanner or they have great reviews but aren't even available for another month. LOL.
FireRaider said:
Has anyone purchased a tempered glass screen protector for this phone that they like?
Most of the ones I have looked at on amazon have complaints that they interfere with the fingerprint scanner or they have great reviews but aren't even available for another month. LOL.
Click to expand...
Click to collapse
I m using trink(unbreakable ) bought from shop
I've always gone for a matte protector in the past but there were none on the market and I found myself enjoying the clarity of an unadulterated screen. So I decided to go for tempered glass and bought these
https://www.amazon.co.uk/gp/aw/d/B073T91BR7
Got two in a pack. Wasn't happy with the application of the first one I put on, so pulled it off and used the second one which I am 99% happy with. Small bubble on one extreme edge which really isn't a problem other than it triggers my OCD. In terms of the protector itself, it's a nice feel tempered glass affair and feels no different to the glass of the original screen. My one criticism is that it is slightly smaller than I think it needs to be. It covers the screen area - just. The cut outs at the top are odd (unless there's a sensor next to the front camera that I don't know about. Personally think they'd have been better off not bothering with the top cutouts and just making it a straight line underneath the earpiece. The cutout for the fingerprint sensor fits well. It actually adds height to the well in which the sensor fits, so it kind of guides your finger to the right location. I use the swipe navigation so I suppose time will tell whether it gets in the way on that front.
A 7 out of 10 for me.
I just installed iVoler on my wife's phone.
(https://www.amazon.fr/dp/B074MPC2G2/ref=cm_sw_r_cp_apap_vCJqUdNtCwZGC).
The top cutouts are weird... I messed up my first tgsp trying to align the flash cutout. Gratefully it was a 2-pack.
Managed to install it without any bubble and almost centered. She doesn't do selfies, so the front-facing flash is not important, and it still works well, it's just inelegant imo (cf. pictures)
Other than that it's a fingerprint magnet, it does not adhere well on the sides and on the top left corner, but it does the job ok for now.
I'll see if someone finds a better one and probably change it.
I don't recommend it
Loccy said:
I've always gone for a matte protector in the past but there were none on the market and I found myself enjoying the clarity of an unadulterated screen. So I decided to go for tempered glass and bought these
https://www.amazon.co.uk/gp/aw/d/B073T91BR7
Got two in a pack. Wasn't happy with the application of the first one I put on, so pulled it off and used the second one which I am 99% happy with. Small bubble on one extreme edge which really isn't a problem other than it triggers my OCD. In terms of the protector itself, it's a nice feel tempered glass affair and feels no different to the glass of the original screen. My one criticism is that it is slightly smaller than I think it needs to be. It covers the screen area - just. The cut outs at the top are odd (unless there's a sensor next to the front camera that I don't know about. Personally think they'd have been better off not bothering with the top cutouts and just making it a straight line underneath the earpiece. The cutout for the fingerprint sensor fits well. It actually adds height to the well in which the sensor fits, so it kind of guides your finger to the right location. I use the swipe navigation so I suppose time will tell whether it gets in the way on that front.
A 7 out of 10 for me.
Click to expand...
Click to collapse
Replying to myself here, but downgrading to a 2 out of 10. A few days in and I have a ding in the protector slap bang in the middle of the screen. Someone less OCD than I would probably put up with it but I don't think I can. My eyes keep getting drawn to it.
I have not tried any tempered glass protectors, but I did install these on both my and my wife's phone. It's pretty good, especially the clarity, it's somewhat okay in resisting fingerprints, but when the screen is on, it's hard to notice any fingerprint smudges. If you can't find a tempered glass protector you like, these will do nicely.
[8-Pack] Moto G5S Plus Screen Protector on Amazon
What you think about this, quality?
by dipos - Motorola Moto G5s Plus Screen Protector - 2x dipos Flexible Glass 9H Display Protection?
They're awful, tempered glasses don't go over to the edges because the screen is slightly curved, plus they get super sweaty, reflective and gross in general. Took off mine, won't recommend.
Sent from my Moto G5S Plus using XDA Labs
Use 5d glass buy from Amazon
iRaymee said:
I just installed iVoler on my wife's phone.
(https://www.amazon.fr/dp/B074MPC2G2/ref=cm_sw_r_cp_apap_vCJqUdNtCwZGC).
The top cutouts are weird... I messed up my first tgsp trying to align the flash cutout. Gratefully it was a 2-pack.
Managed to install it without any bubble and almost centered. She doesn't do selfies, so the front-facing flash is not important, and it still works well, it's just inelegant imo (cf. pictures)
Other than that it's a fingerprint magnet, it does not adhere well on the sides and on the top left corner, but it does the job ok for now.
I'll see if someone finds a better one and probably change it.
I don't recommend it
Click to expand...
Click to collapse
Wow, that one looks like it wasn't even made for your phone, the size is too small and the cutout is wrong - surely any model sold specifically for "G5S Plus" should be a better fit?
I bought the same one linked in the 3rd post, but I have NOT put it on yet. The biggest complaint people have with it is "does not go to the edge" . It is not supposed to!
I have the Spigen case with carbon fiber texture inserts. It wraps around the top edges of the g5s+. So a full front protector would either not let the case fit properly AND / OR would push up the edges of the screen protector.
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.
Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had
kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!
Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.
I managed to get some hair-like fine scratches. I think your full cover helps a lot
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk
kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?
Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress
Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn
crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?
ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.
My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.
Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.
I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.
Hey everyone. Been seeing a few threads here with folks struggling with tempered glass screen protectors for the Pixel 4 XL, so I thought I would share what I can about my experiences so far.
Some notes:
- been using this since beginning of November
- I included pictures of two of the cases I have so that you can see the lip, but I also used this with an unpictured Spigen Neo Hybrid and the protector worked fine
- if you want a cheap alternative, the OMOTON was OK but I had touch issues along the edges. Here is a link if you want to check it out (had great coverage the and install tray worked great): https://www.amazon.ca/OMOTON-Google-XL-Screen-Protector/dp/B07VCJHS76
- I am very picky
- webpage for the model I am reviewing below: https://www.zagg.com/en_us/glass-elite-pixel-4-xl
- pictures taken with my old 2XL as best as I could.
- I have not dropped my phone yet thankfully.
Summary:
- this is the best protector I have found so far. I would prefer a Whitestone Dome but I don't think they are making one for the 4XL (based on a response I got from the Amazon store).
- I suggest this protector if you want full coverage* (see review below) and full adhesive and you don't mind spending extra cash. Install is easy with included install tray.
Pros of this protector:
- was available locally at Best Buy and if I didn't like it, I could easily return it.
- is what I would consider full coverage. I don't get any weird reflections on the sides and the screen is not cutoff. If I look at the phone from an extreme angle on one side I can see the image get distorted due to the glass edge lining up perfectly with the AMOLED screen edge, but that's not something that happens in everyday usage. I have pictures of this below. The screen protector lines up perfectly with the lit portion of the screen.
- full adhesive
- no black bars or screen cutoffs. Full clear.
- I got some bubbles when i installed it. They were gone by the next day.
- I had slight touch sensitivity on one side on the first day of install, but it went away by the next day. Sensitivity is as good now as no protector.
- has install tray
- fits the three cases I tried with it; NOMAD rugged leather case, Spigen Liquid Air, and Spigen Neo hybrid. There is still a bit of lip around the sides that allows you to place the phone face-down no problem, and I can swipe with my thumb from the sides of the case to the protector and it does not feel sharp, etc.
Links to the cases I have used here:
https://hellonomad.com/collections/pixel-4/products/rugged-case-black-pixel-4-xl
https://www.spigen.com/collections/...l-4-xl-case-neo-hybrid?variant=30271183880239
https://www.spigen.com/collections/...l-4-xl-case-liquid-air?variant=30271175983151
Cons:
- expensive. I paid $40CDN
- oleo-phobic coating did not last very long. Much better on the Whitestone Dome Glass I had on my 2XL.
- no room for error installing. The screen lines up perfectly with the lit screen, so you need to take your time installing, even with the tray.
- little/no protection at the top.
Some pictures below, with side and front pictures of the Nomad and Liquid air cases.
$40? That's ridiculous. No thanks
Looks like there's some halo in pictures #2 and #5 on the upper left side. Zagg really is too expensive for what they offer especially when it's a one and done. Would be nice to have whitestone but they had a bunch of issues with with the 3/3XL. They cheapened their loca so there was tons of spider webbing and lifting for many.
zetsumeikuro said:
Looks like there's some halo in pictures #2 and #5 on the upper left side. Zagg really is too expensive for what they offer especially when it's a one and done. Would be nice to have whitestone but they had a bunch of issues with with the 3/3XL. They cheapened their loca so there was tons of spider webbing and lifting for many.
Click to expand...
Click to collapse
I had to turn the phone in such a way to get the halo noticeable, ,but yes, in this price range I would have preferred the Whitestone for 100% sure.
This top with no protection bothers me extremely.
This picture isn't very good but these fit great with no halo at all. You get 3 in a pack and it also comes with an installation tray. This one has been on for 2 month and they're only $8.99 for the 3 pack.
https://www.amazon.com/gp/product/B07YCBZCP3/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
airmaxx23 said:
This picture isn't very good but these fit great with no halo at all. You get 3 in a pack and it also comes with an installation tray. This one has been on for 2 month and they're only $8.99 for the 3 pack.
https://www.amazon.com/gp/product/B07YCBZCP3/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
hate that there is no top protection.. It doesn't feel complete
ceelos218 said:
hate that there is no top protection.. It doesn't feel complete
Click to expand...
Click to collapse
I doubt you'll find one that does, the Soli sensor doesn't work very well through a screen protector. Most protectors also don't cover the camera.
airmaxx23 said:
I don't you'll find one that does, the Soli sensor doesn't work very well through a screen protector.
Click to expand...
Click to collapse
I meant for there to be cutouts instead. I'm waiting for intelliglass 3rd revision for their tempered glass at the moment. it covers the full screen ?
ceelos218 said:
I meant for there to be cutouts instead. I'm waiting for intelliglass 3rd revision for their tempered glass at the moment. it covers the full screen
Click to expand...
Click to collapse
Gotcha, I just don't like the feel of the little tabs of glass with the little cutouts at the top.