[Q] Audio jack broken, how to fix? - Eee Pad Transformer Q&A, Help & Troubleshooting

Dear XDA developers,
Today I noticed my audio output jack of my asus transformer TF101 is broken.
The problem is that only one earbud receive's the sound. (the be specific the left earbud however this can change in how far you push the earphone jack inside. If you put it halfway the right earbud is working if you put the jack completly inside only the left earbud is working.)
And yes I tried about 10 different pair of headphones and they all gave me the same result. I also tested these headphone on my other devices and they worked great on these.
My question now is how to fix this? and how much would it cost me.
I also saw a gadget for the Ipad or iphone etc
http://www.sendstation.com/us/products/pocketdock/lineout-miniusb.html
is there something like a gadget like this for the asus eee pad? since this would just replace my 3.5mm output jack and I wouldn't have to open up my tablet.

There is an audio daughter card that you can replace. I had issues with my microSD card reader which is on the same daughter card so I was looking recently. Found replacements on eBay for about $20 used, $40 new.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2

bsoplinger said:
There is an audio daughter card that you can replace. I had issues with my microSD card reader which is on the same daughter card so I was looking recently. Found replacements on eBay for about $20 used, $40 new.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
can you explain to me how to replace this card?
also got a link to such kind of carD?

kaspertje100 said:
can you explain to me how to replace this card?
also got a link to such kind of carD?
Click to expand...
Click to collapse
You need to take the bezel and back cover off. I took my bezel off to fix a power button and light bleed issue and wrote a tutorial here:
http://www.transformerforums.com/fo.../10501-rs-guide-power-lock-button-issues.html
I did not talk about taking the back cover off, but there are 10-16 screws (#0 or #00 Philips) and then the back cover comes off. I think there are 2 on each side, and then 3 on top and 3 from the bottom between the screen and the back cover. Then you can get to the daughter board. It is on top and should come out by removing 3 more screws and disconnecting 3 cables. See photo below, board is outlined in red:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is an ebay search for TF101 Audio Board

thanks for answering so clearly and fast! Tonight when I come home I will order the audio daughter part.
If I fixed it i will let you know
Verstuurd van mijn Transformer TF101 met Tapatalk

Related

Touch Pro/Fuze TV Out Cable Question

Ok i recently recieved a warranty exchanged fuze (upgrade froma tilt) and i recieved an adapter in the box..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
very similar to whats included with the tilt..its a non standard htc usb plug with an extended adapter on it which has on one side what looks like a normal headphone jack and a mini headphone jack and on the end has the usb..ive included a pic of it..im assuming this is standard accessory equipment included with the ATT FUZE sooo i was looking on ebay for a video out cable and came upon this
http://cgi.ebay.com/TOUCH-PRO-TV-VI...0|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
and ive included a pic
but it looks like you can plug it into what i thought were audio jacks and achieve video out? because i have these cables laying around (from video cameras and stuff) and i tried them just now and i dont get any results..any ideas on how this is being pulled off?
The one on eBay is a modified dongle. And the guy probably did it using the thread found in xda-dev! I will bet you that! LOL! But, if you had searched, you would have found this thread here.
derrrrrrr..yah sorry about not searching..just thought it was interesting and found a makeshift on on ppcgeeks really didnt think about searching lol
pazookie said:
derrrrrrr..yah sorry about not searching..just thought it was interesting and found a makeshift on on ppcgeeks really didnt think about searching lol
Click to expand...
Click to collapse
Well Pazookie, good for you getting your Fuze as a replacement. Didn't cost you a cent. Congrats and I hope you enjoy it. As for the Bold, I brought that the day it came out and took it back the following day. LOL The screen is awesome but I guess I'm just that WM kinda guy. I hated the BB format espically for email and text messages. Again, that's me and I sure it's that I'm so used to the WM platform. I know many people that would give their arm before lossing their BB. LOL
Have a GREAT holiday my Firend.
beachboyde/JON
thanks..merry christmas.//and about the fuze..i have never been more pleased with a device..it went above and beyond my expectations..i thought i was going to have to settle for less buttons and all that stuff but i have found the workarounds easier..i have found it to be more responsive and accurate as in screen taps and typing with the on screen SIP and pocketgba works again (on my tilt once wm6.1 came out that gba emulater stopped working). I LOVE this thing lol oh yah its built tuff too..i dropped it at work the other day (idiot coworker bear hugged me from behind thus flinging the fuze out of my hand). It hid concrete from about 4 feet and the back cover flew off and the battery popped off and only a smal scratch/paintsmudge on the bottom right corner (top half of device). Hope you have a great new year

Cradle

Is anyone using a cradle for Optimus One? I was wondering if other phone cradles will fit?
You can always use an universal one like this one,but the original LG SDT-140 is very very beautiful..although a little pricey too (orange sells it for 18 pounds and I've seen it on ebay too at the same price)
The original cradle is not just beautiful but also of solid build.
Shiny and solid, what a joy to use.
But expensive....
Cradle, where to buy?
Cannot find LG SDT-140 on ebay.
Where could I buy it? I am no Orange customer.
Verizon
I have an optimus t and use the Verizon Vortex dock...it works beautifully and looks decent also.
rikux said:
Cannot find LG SDT-140 on ebay.
Where could I buy it? I am no Orange customer.
Click to expand...
Click to collapse
Hi,
You can find it if you search for item number 400192261278.
Okay I have the cradle but I don't think it's worth the money. It doesn't do much.
Sent from my LG-P500 using XDA App
I was thinking of getting one but if I will be using any case then it will be a hassle just to remove it & put the phone on the cradle.
Sent from my LG-P500 using XDA App
Joel Chan said:
Okay I have the cradle but I don't think it's worth the money. It doesn't do much.
Click to expand...
Click to collapse
Using Dealextreme plexiglass-cell-phone-holder sku33310
and glueing the micro-usb connector in place would be a cheaper solution.
Thanks rikux! It seems a cool & inexpensive alternative.
Sent from my LG-P500 using XDA App
why is it so expensive i realy want one
Will this work?
dealextreme.com/p/usb-ac-charger-adapters-for-htc-desire-g7-eu-plug-100-240v-40145
It's intended for a HTC Desire but as far as I see, the micro usb conector is right in the middle, in the same spot as our P500.
zekesic said:
Will this work?
dealextreme.com/p/usb-ac-charger-adapters-for-htc-desire-g7-eu-plug-100-240v-40145
It's intended for a HTC Desire but as far as I see, the micro usb conector is right in the middle, in the same spot as our P500.
Click to expand...
Click to collapse
Probably won't.
Because for Desire this connector is much closer to the back lid:
img837.imageshack.us/img837/763/htcdesirebottom1.jpg
than for P500:
cdn5.fonearena.com/lg-optimus1/lg-optimus1-P500_13.jpg
someone could buy the crib? i want one too
the dock i made
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i made this an hour or less and just did the vid and pics because was bored it only charges it primary use would be for my car. id tell you where i got the dock form but i dont remember at this time i will post as soon as i find out

[Q] [SOLVED] DEFECTIVE PHONE are you having line out issues and blue photo?

I really do not one to create two threads on this...
issue 1
while charging (tested 2 chargers so far) I get feedback over the speakers when using the line out. we have tried 5 devices through the same set up and the skyrocket is the only one with this feedback
http://youtu.be/P-XmzjoMN4g
issue 2
a number of our photos turn out blue, some others have an odd bright line
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your first issue is a common complaint for all smartphones. They put out so much EMF noise that cheaply made speakers tend to crackle when they are near. Only solutions are speakers with better shielding or keeping the phone away. Sometimes a separation of 3-5 feet is enough.
Issue 2 is just weird. I don't know what to tell you except that it is probably not related to one. Do all your pictures turn out like that or just some?
Thanks for the reply...but out of 5 android devices...this is the only one that does this in the same vehicle/same cables (Harmon kardon sound system)
That is the odd thing about the pics.. it isn't all of them. I would say 1 in 20
Izmir Stinger said:
Your first issue is a common complaint for all smartphones. They put out so much EMF noise that cheaply made speakers tend to crackle when they are near. Only solutions are speakers with better shielding or keeping the phone away. Sometimes a separation of 3-5 feet is enough.
Issue 2 is just weird. I don't know what to tell you except that it is probably not related to one. Do all your pictures turn out like that or just some?
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App
check your finger placement, it may be guiding the LED flash away from 1 side of the image, and towards the other (at least on pic #2)
wirelessFREAK said:
check your finger placement, it may be guiding the LED flash away from 1 side of the image, and towards the other (at least on pic #2)
Click to expand...
Click to collapse
That is what I am thinking.
I went ahead and exchanged my phone over the line out issue...moments away from testing it
Sent from my SAMSUNG-SGH-I727 using XDA App
Phone was defective. So far none of the above issues are present on my new replacement.
Sent from my SAMSUNG-SGH-I727 using XDA App

Microsd card fit?

For those that already have access to one, how does the microsd card fit? Does it stick out? I'd like to use a microsd card as a semi-permanent storage space and wonder if it is easy to eject it during normal usage. Thanks
Nope, the microSD card does NOT stick out. You won't have any jumpy fleas like it was on the Prime, don't worry. At least one of the Prime's issues has been solved throughly -- I haven't had the chance to test the GPS, will do that today )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is what it looks like with a micro SD card.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
MartyHulskemper said:
Nope, the microSD card does NOT stick out. You won't have any jumpy fleas like it was on the Prime, don't worry. At least one of the Prime's issues has been solved throughly -- I haven't had the chance to test the GPS, will do that today )
Click to expand...
Click to collapse
Yay! Now I won't lose any more sds.
Sent from my 3d porn machine.
Yes, but then how do you easily take it out?
I got mine last night, but in my SD card from my phone and then started to panic when I realised I couldn't take it out with my fingers. I had to use a blade to pry it out (which very slightly scratched the side,...which I am NOT happy about)
cs97jb said:
Yes, but then how do you easily take it out?
I got mine last night, but in my SD card from my phone and then started to panic when I realised I couldn't take it out with my fingers. I had to use a blade to pry it out (which very slightly scratched the side,...which I am NOT happy about)
Click to expand...
Click to collapse
Umm....it's spring loaded socket. So, if you press it in, it will pop out...
Now, don't pry anything out of that slot...
cs97jb said:
Yes, but then how do you easily take it out?
I got mine last night, but in my SD card from my phone and then started to panic when I realised I couldn't take it out with my fingers. I had to use a blade to pry it out (which very slightly scratched the side,...which I am NOT happy about)
Click to expand...
Click to collapse
Haha...thanks boys. I tried that but looks like I didn't press it in hard it enough for it to spring back out.
Houston: Disaster averted!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
The first time I put the micro sd card in to the infinity I freaked out.... then tried using tweezers to take it out... After failing at that I realized it pushed in against the spring to pop out. Quite nicely fits in there.

Desktop cradle?

Has anyone out there found a decent desktop cradle? I like to stand my phone up on the night stand while charging.
Got this one a few weeks ago for $8...worth it IMO, the quality and construction are both great esp for the price: https://www.amazon.com/gp/aw/d/B0126HG28I/ref=yo_ii_img?ie=UTF8&psc=1
Any pics of it in the stand/connector/power cable etc? Thx Would be nice to have one at work to stand the phone up instead of it sitting on my notepad flat.
Maybe at home as a charge stand at night as well.
I bought one of these a while back when I had the wireless adapter for my M8.
http://www.amazon.com/gp/product/B00M4OB1WG?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
If anyone is still interested in this, I ordered this one http://www.amazon.com/gp/product/B018PJ6EBG?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
*****UPDATE*******
This will NOT NOT NOT work with the A9. I sent it back to the seller with a rant. Obviously they didn't test it, the USB connection is 180 degrees out.
****UPDATE*****
techlogik said:
Any pics of it in the stand/connector/power cable etc? Thx Would be nice to have one at work to stand the phone up instead of it sitting on my notepad flat.
Maybe at home as a charge stand at night as well.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use a cheap business card holder, it is black and mesh and my phones have all fit very well in it on their side.
Russ741 said:
If anyone is still interested in this, I ordered this one http://www.amazon.com/gp/product/B018PJ6EBG?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
*****UPDATE*******
This will NOT NOT NOT work with the A9. I sent it back to the seller with a rant. Obviously they didn't test it, the USB connection is 180 degrees out.
****UPDATE*****
Click to expand...
Click to collapse
You mean like this one?
http://www.martgreat.com/htc-one-a9...nzp2lHPJ_XLh25eCUZW-XoiY0xxFrrdod8aApsX8P8HAQ
The USB connector is turned around 180 degrees..WTF.
Anyway, can't find a desktop cradle worth beans anywhere. Pretty sad how the A9 support is so limited.
techlogik said:
Anyway, can't find a desktop cradle worth beans anywhere. Pretty sad how the A9 support is so limited.
Click to expand...
Click to collapse
The problem is HTC don't make the charging in the middle but they keep moving the port in/out a little in the side from model to model. For example, the dock for m7 won't fit the m8, the dock for m8 won't fit the m9. While the dock for m9 has same width as the a9 but the port location is off just a little. If they would just put the freaking charging in the middle, we can use the dock from the m8 or m9.
This one would work if you don't mind the phone is off center: http://www.amazon.com/First2savvv-d...&qid=1455986552&sr=1-10&keywords=htc+one+dock
I used one of the dock for the M9 before and the problem is it disables the Quick Charge feature. It takes a long time to charge the phone. But I only tried one. If you have one that work with Quick Charger then please let me know.
Someone just need to make a dock where the charging port slides back and forth.

Categories

Resources