I'm trying to flash clockworkmod recovery on a goophone x1 and I don't really know what I'm doing.
I can't find a build for goophone x1 so I'm trying to use builder dot clockworkmod dot com to build one.
I flashed a recovery image that doesn't work on my phone so I kind of screwed that.
I don't know how to get a stock recovery image to input. I thought I might be able to dump the boot image and use that. I tried using dump_image but when I try to execute it, it says "error scanning partitions". I also tried using romdump but I get a segmentation fault. I then tried using android partition manager and just doesn't do anything when I tell it to dump the boot image. It does, however, dump the system image.
I tried using the system.img file at builder dot clockworkmod dot com but that didn't work (as I suspected it wouldn't).
Is there any way I can use system.img to build a clockworkmod recovery?
Better yet, does anyone have a clockworkmod recovery.img that will work on a goophone x1?
Shrubbist said:
I'm trying to flash clockworkmod recovery on a goophone x1 and I don't really know what I'm doing.
I can't find a build for goophone x1 so I'm trying to use builder dot clockworkmod dot com to build one.
I flashed a recovery image that doesn't work on my phone so I kind of screwed that.
I don't know how to get a stock recovery image to input. I thought I might be able to dump the boot image and use that. I tried using dump_image but when I try to execute it, it says "error scanning partitions". I also tried using romdump but I get a segmentation fault. I then tried using android partition manager and just doesn't do anything when I tell it to dump the boot image. It does, however, dump the system image.
I tried using the system.img file at builder dot clockworkmod dot com but that didn't work (as I suspected it wouldn't).
Is there any way I can use system.img to build a clockworkmod recovery?
Better yet, does anyone have a clockworkmod recovery.img that will work on a goophone x1?
Click to expand...
Click to collapse
Try this - http://www.needrom.com/mobile/goophone-x1-3/ + http://www.needrom.com/mobile/goophone-x1/ + http://www.androidgroupon.com/
vash_stanped said:
Try this - (I'm new and can't post links. See original text.) + (I'm new and can't post links) + (I'm new and can't post links)
Click to expand...
Click to collapse
Thanks. I didn't see anything for the x1 on androidgroupon but I tried the other two with the following results:
The first one (.../goophone-x1-3/):
The 'new screen' rom did not work at all. I flashed and turned on the phone and i got horizontal lines. No splash screen, no booting, couldn't get into recovery, nothing.
Flashing the 'old screen' rom fixed it. It worked but was really slow and everything was in Chinese.
The .../goophone-x1/ one:
I flashed the recovery. Only recovery that I've found that works on my goophone x1, but it's all Chinese. I tried to use that recovery in the clockworkmod recovery builder but the result did not work (could not boot into the result) so I put back the recovery from the above.
I then flashed the rom version 2 using the Chinese recovery. It took a long time to boot and my touchscreen no longer works. I've tried flashing it again and also tried flashing the roms on .../goophone-x1-3/ and still no touch screen.
As it currently stands: No touch screen and Chinese recovery. I suspect I'm screwed.
This may help you:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My goophone hasn't arrived yet, and i'm investigating...
You found something useful? I have the same problem as you
Shrubbist said:
Thanks. I didn't see anything for the x1 on androidgroupon but I tried the other two with the following results:
The first one (.../goophone-x1-3/):
The 'new screen' rom did not work at all. I flashed and turned on the phone and i got horizontal lines. No splash screen, no booting, couldn't get into recovery, nothing.
Flashing the 'old screen' rom fixed it. It worked but was really slow and everything was in Chinese.
The .../goophone-x1/ one:
I flashed the recovery. Only recovery that I've found that works on my goophone x1, but it's all Chinese. I tried to use that recovery in the clockworkmod recovery builder but the result did not work (could not boot into the result) so I put back the recovery from the above.
I then flashed the rom version 2 using the Chinese recovery. It took a long time to boot and my touchscreen no longer works. I've tried flashing it again and also tried flashing the roms on .../goophone-x1-3/ and still no touch screen.
As it currently stands: No touch screen and Chinese recovery. I suspect I'm screwed.
Click to expand...
Click to collapse
Same problem here, is there a working rom with touch functionality?
ROM For Daxian xy100s & GoophoneX1
New working touchscreen ROM`s on needrom. com . For user with touchscreen problems download from there!
sinclocker said:
New working touchscreen ROM`s on needrom. com . For user with touchscreen problems download from there!
Click to expand...
Click to collapse
In my GooPhone X1 works version 0626-老屏-老TP-老前摄像头.zip
And HERE download Recovery for GooPhone X1 in English (Flash with "Flash Tool")
castillo92 said:
In my GooPhone X1 works version 0626-老屏-老TP-老前摄像头.zip
And HERE download Recovery for GooPhone X1 in English (Flash with "Flash Tool")
Click to expand...
Click to collapse
I feel like an Idiot. ho do i flash the new recovery using "flash tool"?
I have a x1.. I cant remember my password so cant acess anything!! Please help. Its ok if all the data is lost! But how do I hard reset it? It wont enter cwm even if I pressed the power+vol+ button !!
Sent from my GT-P3100 using xda premium
Help
Sent from my GT-P3100 using xda premium
Hello!
I have a Daxian xy100s china phone. I think this phone (goophone x1) is almast same then my phone. I found roms (on need rom), and i read many forums for my phone. I have problems. I can't use the flash tools, ans i cant root my phone (I tired everything eroot;aroot,bat.exe,motochopper, etc..). I can't flash cwm.
If anybody help me, I will be very happy.
Thx a lot, and SRY for my bad english.
Related
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
sandeeptikoo said:
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
Flash a stock ftf firmware using Flashtool to your phone
Sent from my SK17i using xda premium
again stuck
UchihaDareNial said:
Flash a stock ftf firmware using Flashtool to your phone
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Yessss itt worked... thanks
I flashed it with .431 Firmware Ware fft and It started up
and then flashed kernel .562 Kernel fft and them Rooted again
and then flashed recovery ClockWorkMod Recovery 5.0.2.7-nAa-r2
Phone was normal then
Bootloader is Unlocked
But whenever i try to install any custom Rom it again Stucks with the same problem at SONY boot logo.
I tried to install;
neoAokpV0.1-10-9 --- Stuck on the boot logo after reboot
JJHybrid_ROM_3.2_Stable_AOSP_ROMControl_NEO -- Stuck on the boot logo after reboot
Can you suggest any good solution.
This is my Wife's phone she's gonna kill me ...
sandeeptikoo said:
Yessss itt worked... thanks
I flashed it with .431 Firmware Ware fft and It started up
and then flashed kernel .562 Kernel fft and them Rooted again
and then flashed recovery ClockWorkMod Recovery 5.0.2.7-nAa-r2
Phone was normal then
Bootloader is Unlocked
But whenever i try to install any custom Rom it again Stucks with the same problem at SONY boot logo.
I tried to install;
neoAokpV0.1-10-9 --- Stuck on the boot logo after reboot
JJHybrid_ROM_3.2_Stable_AOSP_ROMControl_NEO -- Stuck on the boot logo after reboot
Can you suggest any good solution.
This is my Wife's phone she's gonna kill me ...
Click to expand...
Click to collapse
Make sure you flash the right kernel to use the custom rom,and after you flashed the custom rom in CWM Recovery,make sure to wipe data,factory reset,wipe cache partition,and wipe dalvik cache.After that,restart the phone as usual,and the first boot might take a while...
NOTICE : If the time of the custom rom flashing is freaking fast (around 10 seconds),then go to advance,and choose fix permission and start to flash again
Sent from my SK17i using xda premium
successor crealet
same problem as above
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/how...ed-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1686041
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.and the computer is not even detecting it what to do please help
Kindly help me guys.. Need my phone back
tejasvi1 said:
same problem as above
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/how...ed-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1686041
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.and the computer is not even detecting it what to do please help
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
When you install that rom,have you install its specific custom kernel?
Sent from my SK17i using xda premium
if you are talking about boot image than no what can i do please help
if your bootloader is unlocked you cannot install a custom rom. You must unlock your bootloader but you lose your warranty. Read this http://forum.xda-developers.com/showthread.php?t=1568792
Xperia neo
i unlocked my bootloader, then using hotboot method flashed nightelf's kernel by hootboot method and then used it with icecream pureness rom for sometime. later i wanted to format the system completely, so i selected format user data in CWM and tried flashing the rom again.but while flashing it got stuck for a long time. i removed the battery and switched it back on and it didnt start up. i flashed a global .587 ftf using flashtool.
Flastool status shows bootloader status unlocked and rooted but when i press the root button , it shows root hack failed and super su is not installed.. please help...
And whatever kernel i try to flash it gets stuck in the sony logo...
sandeeptikoo said:
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
Dummies Present
[SOLVED]Neo V stuck in Bootloader (Sony Logo)
Hi all..here I can help.. >>
1. Download and install Flashtool here : http://androxyde.github.com/
2. Download kernel : http://depositfiles.com/files/zlh1aa1eg
3. Extract the rar file ( MT11i Neov 4.1.B.0.587 India- By abhihtz.rar )
4. Copy the kernel ( MT11i Neov 4.1.B.0.587 India- By abhihtz.ftf ) and paste into C:\Flashtool\firmwares.
5. Now open FlashTool.exe and select mode 'Flashmode'.
6. Choose and Click OK..>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Then follow the instruction on pop up screen..
8. After flashing kernel unplug USB cabel and power on the device.
9. Plz wait until boot up...takes a long time....
well i have already rooted my phone and used various roms...i flashed the stock rom via flashtool and trid to install cwm by hotboot method.
well after i hotboot it doesn't go into recovery, the charging icon appears... plz helpp..!!
bZed94 said:
well i have already rooted my phone and used various roms...i flashed the stock rom via flashtool and trid to install cwm by hotboot method.
well after i hotboot it doesn't go into recovery, the charging icon appears... plz helpp..!!
Click to expand...
Click to collapse
for CWM try using "x parts" application from play store
cant root....!!!!???
after entering to cwm.......and i extracted the zip from sd card . but it stops and i pressed on reboot in cwm.
i found that the busybox had installed but there is no proper root access
The only solution to this problem is to flash a stock ics. Firmware on neo v through. Flashtool
Sent from my LT28h using xda premium
---------- Post added at 10:03 AM ---------- Previous post was at 09:49 AM ----------
You can try recovery x it worked for me and the cwm is working good no problem in entring in cwm
Sent from my LT28h using xda premium
Good afternoon guys.
This is my first post
I have the same problem with the guys above me,so since i found a thread with the same name,i thought i should use this,rather than creating a new thread.
So,i try to flash my phone but it says i must enable unknown sources and debuging,but this is not possible,since we are stuck on SONY logo.
SEUS says that my phone uses the latest software,so nothing there.
Also,im not sure if im flashing my phone the proper way,its been a while since i installed HD.
I used Xperia Ultimate HD 2.0.3
so,any help on booting my device?
If possible,i would like to suggest me a better HD version ( i downloaded 5 ) with the proper kernel version..
thank you in advance.
Flash a stock ftf firmware using Flashtool to your phone
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
I also face same problem some time..
flash stock JB with SP tool
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
Hi, looks to me like some problem with the recovery. You should calm down and try re-flashing the recovery properly either with Mobile Uncle, or if it does not work then try to do it with the SP Flash Tool.. Follow the instructions given in the thread and see if it works.. :good:
And while you are at it, you might want to re-flash the ROM with SP Flash tool perhaps that could help..
Reflashing entire rom will solve the problem. Re-install the drivers and the try it phone is detected to the tool.
ekhasti said:
I also face same problem some time..
flash stock JB with SP tool
Click to expand...
Click to collapse
I will do it thanks buddy.
ibshar said:
Hi, looks to me like some problem with the recovery. You should calm down and try re-flashing the recovery properly either with Mobile Uncle, or if it does not work then try to do it with the SP Flash Tool.. Follow the instructions given in the thread and see if it works.. :good:
And while you are at it, you might want to re-flash the ROM with SP Flash tool perhaps that could help..
Click to expand...
Click to collapse
I tried everything buddy. Thinking to flash Stock JB rom first.
bsuhas said:
Reflashing entire rom will solve the problem. Re-install the drivers and the try it phone is detected to the tool.
Click to expand...
Click to collapse
I will re-install the JB ROM first then your MOD.
For all of you:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disturbed™ said:
For all of you:
Click to expand...
Click to collapse
lol! :laugh:
Hey bro,
i got the same problem few days ago,,, dont worry,, just download the STOCK recovery image of mmx110 and install it via mobile uncles and then OFF and ON phone and then flash CWM with mobile uncle and after installation don't choose to go in recovery mode,,,, and then off your mobile and try to go in CWM and see it will work
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
First of all don't Panic and Stay Calm.
I have been in the exact same situation. SP Tools was not detecting my Canvas 2 as well. In a Thread at XDA I found the Solution. Switch off the Mobile, remove Battery, and then connect to PC via USB cable and press and hold the Volume + button.
Refer the Link below, Meta Mode
http://forum.xda-developers.com/showthread.php?t=2167244
There is a permanent method of installing drivers also instead of going every time meta mod
Just follow this thread....
Link: http://forum.xda-developers.com/showthread.php?t=2370906
Also u can flash stock recovery to get rid of this and den flash cwm later.... instead of flashing a whole new rom.
Thanks Guys. I Found the problem actually. It was Data cable problem. Changed it today & flashed it. Done. :highfive::good:
Hi! Thanks a ton. Solved my problem in a jiffy.
so guys, i have a SAMSUNG GT-I8262 and it was rooted, i tried rooting again with farmaroot(older version) and selected install superSU and it went fine, then i restarted and it was also normal then when i opened supersu and it said it need to update su binary,so i continued with it, it asked me which method i want to use to update binary(normal or cwm) for a change i selected cwm.
i thought it would be automatic but it wasnt, then i thought to restarting phone and installing it normally but when it restarted, it again booted to recovery instead of loading os
i tried everything and still it boot up to recovery
i can go to BL but when i am there and connect phone to pc, odin dont detect my phone, i have samsung device driver installed but still odin do not detect it
i tried factory wipe but still it wont boot up the android
i had monster rom(by omkar)(build 2) installed on it and it was working ok
i also tried installing monster rom(build 3) from extsd card using cwm and it installed but still boots up to recovery
when i connect it to charger, it again boots up to recovery instead of showing charging sign(even when its turned off and i do not touch a single button)
now i want to fix this problem on my own(without giving it to repairman), please help me with it.
PLEASE REPLY ASAP
just to add, i have samsung tab 3 and odin detect it when connected. so this proves i have samsung driver installed
Try to fix permission in CWM and reboot ur phone
* EDIT: Always use the option "NORMAL" when SuperSU ask u for update binaries.
I don't know how to do that,
Will you please explain how to
Sent from my SM-T211 using xda app-developers app
It have cwm recovery v6.0.3.6 on it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-T211 using xda app-developers app
Please, someone reply with possible solution
Sent from my SM-T211 using xda app-developers app
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
sscsps said:
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Bro!! Is your phone detected by odin?? cause mine phone(Core gt-i8262) is not been detected by odin
I have the same problem of cwm bootloop .
plz reply fast !! thanks :good: and (sory for my bad english)
Dipesh[Coreboy] said:
Bro!! Is your phone detected by odin?? cause mine phone(Core gt-i8262) is not been detected by odin
I have the same problem of cwm bootloop .
plz reply fast !! thanks :good: and (sory for my bad english)
Click to expand...
Click to collapse
Yes, if yours don't detect then try uninstalling Samsung USB drive and then reinstalling it, it might work
And if it don't work then try different USB cable
And if neither of these works, then try different computer
Good luck, hope this help
Sent from my SM-T211 using XDA Free mobile app
recovery loop fixed
I had similar problem with CWM loop after failed SuperSU binary updates.
What worked for me, was to restore a CWM backup, WITH the charger plugged in.
It did not solve the problem without the charger, just keep getting the loop. Go figure... Strange, but this is what worked for me.
Guyyyzzzzzzz plzz help me..i am stuck in bootloop for Samsung galaxy core(gt-I8262).....I had rootd my phon a eek ago..i loved a lot...I tied installing cwm .......I installed it using rashr tool...it asked m fo a restart...I said ok..and its stuck in bootloop..now I want to gt out of hre as well I want to flash samyKAT on my phone..i had stock rom be4...plzz help me step by step...
sscsps said:
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Did you flash any custom recovery through odin or did you flash the stock recovery?
Please reply fast and also give links for any recovery for I8262 if you have any. I too got into bootloops and its booting back to CWM recovery, i tried everything,none is working.
Thanks:good:
I had installed cwm recovery on my gt-18262 it was succesfully done but now when I updated supersu from install zip option in cwm recovery but stuck in bootloop and isnt recognized by odin also plzzz plzzzz help im in struggle give a urgent repy
CWM bootloop fix
I had the same issue and I managed to fix it. I'll try to explain more detailed, but first some history (it has to do with the way I solved the issue):
I got the i8262 from my girlfriend as she (finally) bought a new phone and I decided, that I'll push this one to the limits (I saw that there is CM 11 for it and I decided to install). So I had to flash first custom recovery - there are two options here (as you may know): CWM and TWRP. There are plenty of tutorials how to do that on the internet. Most of them are using ODIN to flash, so I decided not to play it smart, but to use what most people use. So I downloaded USB drivers, ODIN and both CWM and TWRP. Unfortunately, when I try to flash with ODIN, on the phone I receive message saying "Signature Verification Failed" few seconds after the beginning and then phone reboots into Android. I tried both CWM and TWRP - they were both failing. So I decided to try with other ways to flash it - if your phone is rooted, then you can install custom recovery from the phone itself, without the need of a PC (great for me, as I don't have Windows). So I rooted the phone and tried a few programs until I found one that's working - Rashr - Flash Tool. I flashed CWM using it, it asked me to reboot in recovery mode, I said yes, and.... no getting out of the recovery mode. Not to mention that the menu was dancing when I used volume buttons to switch items... I read on one place, that system partition needs to be mounted everytime to evade this bootloop, but this didn't help for me.
The fix:
ODIN But not exactly how you imagine it. I followed again one of the may tutorials for ODIN, this time flashing TWRP. It failed again, but after failing ODIN reboots the phone properly!!! This allowed my to start Rashr again and to flash TWRP - it worked like a charm. No more bootlooping. No more funky menus. Hope I was helpful and happy hacking
Hello members,
PROBLEM - phone stuck at splash screen/boot screen/boot logo after I tried to downgrade it.
- RECOVERY mode gives error " DM-VERITY VERIFICATION FAILED NEED TO CHECK DRK FIRST........."
DIAGNOSTICS - phone can go into RECOVERY MODE AND DOWNLOAD MODE
- Phone is able to boot into TWRP RECOVERY after flashing twrp
-
phone INFORMATION While it was turning ON/working condition baseband - G920W8 VLU3BOL1 5.1.1 ROGERS
----------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOLUTIONS I have tried so far :
now I have tried firmwares ABOVE but ONLY J7 and above firmware installs, all other firmware throws error in ODIN FOR NAND WRITE FAIL,
and this error in PHONE
" after successful flashing of phone with J7 and above version, phone wont go past boot screen, BUT after restart Phone does go to RECOVERY MODE and download mode,
I have tried installing TWRP RECOVERY, recovery worked, I tried mounting PHONE in MTP, MTP WORKED, but I am unable to copy CUSTOM ROM in phone because of COPY ERROR, I thought to flash custom rom to make it work.
I have tried FLASHING androidfilehost BL. bootloader files for G920W8 but none of them worked, phone is still stuck at splash screen.
I have tried FLASHING pit file for this model too but still phone is stuck at SPLASH SCREEN
I backed up EFS WITH service box which I use to service samsung phones, I tried reflashing EFS too but still stuck at boot splash screen
I have tried smart switch and kies but both software says ' UNSUPPORTED DEVICE"
Please tell me what can be done now to make it work
Administr4tor said:
Hello members,
PROBLEM - phone stuck at splash screen/boot screen/boot logo after I tried to downgrade it.
- RECOVERY mode gives error " DM-VERITY VERIFICATION FAILED NEED TO CHECK DRK FIRST........."
DIAGNOSTICS - phone can go into RECOVERY MODE AND DOWNLOAD MODE
- Phone is able to boot into TWRP RECOVERY after flashing twrp
-
phone INFORMATION While it was turning ON/working condition baseband - G920W8 VLU3BOL1 5.1.1 ROGERS
----------------------------------------------------------------------
SOLUTIONS I have tried so far :
now I have tried firmwares ABOVE but ONLY J7 and above firmware installs, all other firmware throws error in ODIN FOR NAND WRITE FAIL,
and this error in PHONE
" after successful flashing of phone with J7 and above version, phone wont go past boot screen, BUT after restart Phone does go to RECOVERY MODE and download mode,
I have tried installing TWRP RECOVERY, recovery worked, I tried mounting PHONE in MTP, MTP WORKED, but I am unable to copy CUSTOM ROM in phone because of COPY ERROR, I thought to flash custom rom to make it work.
I have tried FLASHING androidfilehost BL. bootloader files for G920W8 but none of them worked, phone is still stuck at splash screen.
I have tried FLASHING pit file for this model too but still phone is stuck at SPLASH SCREEN
I backed up EFS WITH service box which I use to service samsung phones, I tried reflashing EFS too but still stuck at boot splash screen
I have tried smart switch and kies but both software says ' UNSUPPORTED DEVICE"
Please tell me what can be done now to make it work
Click to expand...
Click to collapse
That's happening because you cannot downgrade from OJ7 to a lower image. Once you upgrade the bootloader from an OTA/Manual flash, you cannot downgrade it. Take the latest OL1 Bell image and flash it to your device if you are trying to get to the latest version.
Check the S6 Thread for how to download images directly from Samsung using SamFirm. I recall posting a short guide in that thread. After downloading, flash the entire image using ODIN and it will update you to the newest firmware. The images are identical for all Canadian carriers. Bloat will be determined from the sim/efs and applied at boot regardless of whichever carrier image you flash.
After flashing, go into stock samsung recovery and do a full wipe and it shoudl bring your phone back to bootable state.
Flash newer firmware
Try to root your device using supersu 2.65 and try this will remove your DM verity key in kernel if still same install uni kernel this will definitely boot your device to normal (uni kernel only work with OS 5.1.1)
Sent from my ONE A2001 using XDA Free mobile app
evonc said:
That's happening because you cannot downgrade from OJ7 to a lower image. Once you upgrade the bootloader from an OTA/Manual flash, you cannot downgrade it. Take the latest OL1 Bell image and flash it to your device if you are trying to get to the latest version.
Check the S6 Thread for how to download images directly from Samsung using SamFirm. I recall posting a short guide in that thread. After downloading, flash the entire image using ODIN and it will update you to the newest firmware. The images are identical for all Canadian carriers. Bloat will be determined from the sim/efs and applied at boot regardless of whichever carrier image you flash.
After flashing, go into stock samsung recovery and do a full wipe and it shoudl bring your phone back to bootable state.
Click to expand...
Click to collapse
I have already tried BELL image which is Newer version than the ORIGINAL BASEBAND = G920W8 VLU3BOL1 5.1.1 ROGERS
Thanks for input
Coolmfarshard said:
Try to root your device using supersu 2.65 and try this will remove your DM verity key in kernel if still same install uni kernel this will definitely boot your device to normal (uni kernel only work with OS 5.1.1)
Sent from my ONE A2001 using XDA Free mobile app
Click to expand...
Click to collapse
l love you so MUCH, Thanks all members for giving your inputs, I was trying to boot it for past 3 days
Coolmfarshard said:
Try to root your device using supersu 2.65 and try this will remove your DM verity key in kernel if still same install uni kernel this will definitely boot your device to normal (uni kernel only work with OS 5.1.1)
Sent from my ONE A2001 using XDA Free mobile app
Click to expand...
Click to collapse
if I downgrade and flash this kernel, will it work? I want to downgrade to 5.0.1
thank you
Administr4tor said:
if I downgrade and flash this kernel, will it work? I want to downgrade to 5.0.1
thank you
Click to expand...
Click to collapse
You cannot downgrade. Only way would be to take it to the service center.
Long Story Shot I flashed Magisk.zip using twrp.. My device was not booting in Android.. I did everything like flashing stock boot.img but nothing worked then I tryed to install stock recovery on my Realme C12 but when I flashed it.. Now my phone is not booting into anything.. I need get help.. Cant Boot into fast boot cause it keeps trying to get me into recovery mode. I think Reovery Image and Android Image are broken.. How can I fix or reboot to Fastboot Mode. HELP
RehanRashid said:
Long Story Shot I flashed Magisk.zip using twrp.. My device was not booting in Android.. I did everything like flashing stock boot.img but nothing worked then I tryed to install stock recovery on my Realme C12 but when I flashed it.. Now my phone is not booting into anything.. I need get help.. Cant Boot into fast boot cause it keeps trying to get me into recovery mode.. HELP
Click to expand...
Click to collapse
(read the whole thing before acting)
reflash everything except the data partition
if that fails, wipe all and reflash
if that fails, its the wrong stock firmware for your device's release
And if using android 11+ there are specific magisk files for them i bilieve
flairepathos.info said:
(read the whole thing before acting)
reflash everything except the data partition
if that fails, wipe all and reflash
if that fails, its the wrong stock firmware for your device's release
And if using android 11+ there are specific magisk files for them i bilieve
Click to expand...
Click to collapse
How can I reflash everything? I am stuck in bootloop how can I connect to adb.. The button that used to get me in Fastboot Mode now Boot In Recovery which is not booting to recovery cause it just keeps rebooting..
RehanRashid said:
How can I reflash everything? I am stuck in bootloop how can I connect to adb.. The button that used to get me in Fastboot Mode now Boot In Recovery which is not booting to recovery cause it just keeps rebooting..
Click to expand...
Click to collapse
There should be an engineer mode
so google search sp flash tool for your phone
or How to flash stock firmaware "name of phone" (phones name)
There will be easy guides
flairepathos.info said:
There should be an engineer mode
so google search sp flash tool for your phone
or How to flash stock firmaware "name of phone" (phones name)
There will be easy guides
Click to expand...
Click to collapse
Will this tool work even If I am in bootloop?
Thanks I will let you know if I face any trouble...
RehanRashid said:
Thanks I will let you know if I face any trouble...
Click to expand...
Click to collapse
You're welcome, please use the Thanks button if it works for you
Yes it should work once your phone is off,even during boot loop, the drivers will lock state in download mode
if Sp flash tools isnt working check with youtube which tool they are using
flairepathos.info said:
You're welcome, please use the Thanks button if it works for you
Yes it should work once your phone is off,even during boot loop, the drivers will lock state in download mode
if Sp flash tools isnt working check with youtube which tool they are using
Click to expand...
Click to collapse
The Flash Tool is not detecting the deviec.. In the device manage the phone is showing as OPPO Preloader and a Yellow Mark.. How can i fix this? I can also hear the phone disconnecting and connecting becuase of the bootloop
RehanRashid said:
The Flash Tool is not detecting the deviec.. In the device manage the phone is showing as OPPO Preloader and a Yellow Mark.. How can i fix this? I can also hear the phone disconnecting and connecting becuase of the bootloop
Click to expand...
Click to collapse
Sometime this..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I made it work somehow but I get this error.. Please Help
RehanRashid said:
I made it work somehow but I get this error..
View attachment 5400667
Click to expand...
Click to collapse
Try these Stock firmware / stock rom for Realme c12
Software Update
Update the latest software version on your Realme phone.
www.realme.com
REALME C12 RMX2189 FLASH FILE (STOCK ROM)
Realme C12 RMX2189 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock
www.gsmmafia.com
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com
I am using this Stock Rom. I need to fix the error.. I cant afford another phone.. Let me know any alternative software, which are easy to use
REALME C12 RMX2189 FLASH FILE (STOCK ROM)
Realme C12 RMX2189 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock
www.gsmmafia.com
I am getting the same error.. Tried Everything
I want soloution for this error.. Device: Realme C12
[Deleted]
Omg Thanks.. My phone is just like brand new.. I was getting the error because I did not Disable MTK Flash Security!!!!!!!!!
Sir, quick question where did you get the mtk scatter text like that on the image? Because the thing happened to you is the same happened to me right now
adayao said:
Sir, quick question where did you get the mtk scatter text like that on the image? Because the thing happened to you is the same happened to me right now
Click to expand...
Click to collapse
You can download it from anywhere search " Download MT6765 Scatter file " you will get it.. or visit this website https://www.bypassfrpfiles.com/2021/03/mediatek-scatter-file/
RehanRashid said:
Omg Thanks.. My phone is just like brand new.. I was getting the error because I did not Disable MTK Flash Security!!!!!!!!!
Click to expand...
Click to collapse
uhhm hello sir, can you tell me the step-by-step on how you did it? I have exactly the same problem that you had and I'm having a hard time finding the solution for it. I'm really gonna be f up if I lost this phone haha. please help...
Jiboi said:
uhhm hello sir, can you tell me the step-by-step on how you did it? I have exactly the same problem that you had and I'm having a hard time finding the solution for it. I'm really gonna be f up if I lost this phone haha. please help...
Click to expand...
Click to collapse
Download the firmware for your devices for Realme's Offical website. Install all the required drivers. And Download Sp Flash Tool and MTK Bypass and then:
Load the Scatter and Auth File. And click Download
Run MTK Bypass and click bypass
Connect the phone to pc while holding both power buttons
And Wait!