Database Info

[Q] Rooted Xperia Neo V , Tried to Install Custom ROM, Stuck at Sony Logo at startup

Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back

sandeeptikoo said:
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
Flash a stock ftf firmware using Flashtool to your phone
Sent from my SK17i using xda premium

again stuck
UchihaDareNial said:
Flash a stock ftf firmware using Flashtool to your phone
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Yessss itt worked... thanks
I flashed it with .431 Firmware Ware fft and It started up
and then flashed kernel .562 Kernel fft and them Rooted again
and then flashed recovery ClockWorkMod Recovery 5.0.2.7-nAa-r2
Phone was normal then
Bootloader is Unlocked
But whenever i try to install any custom Rom it again Stucks with the same problem at SONY boot logo.
I tried to install;
neoAokpV0.1-10-9 --- Stuck on the boot logo after reboot
JJHybrid_ROM_3.2_Stable_AOSP_ROMControl_NEO -- Stuck on the boot logo after reboot
Can you suggest any good solution.
This is my Wife's phone she's gonna kill me ...

sandeeptikoo said:
Yessss itt worked... thanks
I flashed it with .431 Firmware Ware fft and It started up
and then flashed kernel .562 Kernel fft and them Rooted again
and then flashed recovery ClockWorkMod Recovery 5.0.2.7-nAa-r2
Phone was normal then
Bootloader is Unlocked
But whenever i try to install any custom Rom it again Stucks with the same problem at SONY boot logo.
I tried to install;
neoAokpV0.1-10-9 --- Stuck on the boot logo after reboot
JJHybrid_ROM_3.2_Stable_AOSP_ROMControl_NEO -- Stuck on the boot logo after reboot
Can you suggest any good solution.
This is my Wife's phone she's gonna kill me ...
Click to expand...
Click to collapse
Make sure you flash the right kernel to use the custom rom,and after you flashed the custom rom in CWM Recovery,make sure to wipe data,factory reset,wipe cache partition,and wipe dalvik cache.After that,restart the phone as usual,and the first boot might take a while...
NOTICE : If the time of the custom rom flashing is freaking fast (around 10 seconds),then go to advance,and choose fix permission and start to flash again
Sent from my SK17i using xda premium

successor crealet
same problem as above
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/how...ed-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1686041
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.and the computer is not even detecting it what to do please help
Kindly help me guys.. Need my phone back

tejasvi1 said:
same problem as above
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/how...ed-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1686041
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.and the computer is not even detecting it what to do please help
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
When you install that rom,have you install its specific custom kernel?
Sent from my SK17i using xda premium

if you are talking about boot image than no what can i do please help

if your bootloader is unlocked you cannot install a custom rom. You must unlock your bootloader but you lose your warranty. Read this http://forum.xda-developers.com/showthread.php?t=1568792

Xperia neo
i unlocked my bootloader, then using hotboot method flashed nightelf's kernel by hootboot method and then used it with icecream pureness rom for sometime. later i wanted to format the system completely, so i selected format user data in CWM and tried flashing the rom again.but while flashing it got stuck for a long time. i removed the battery and switched it back on and it didnt start up. i flashed a global .587 ftf using flashtool.
Flastool status shows bootloader status unlocked and rooted but when i press the root button , it shows root hack failed and super su is not installed.. please help...
And whatever kernel i try to flash it gets stuck in the sony logo...

sandeeptikoo said:
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
Dummies Present
[SOLVED]Neo V stuck in Bootloader (Sony Logo)
Hi all..here I can help.. >>
1. Download and install Flashtool here : http://androxyde.github.com/
2. Download kernel : http://depositfiles.com/files/zlh1aa1eg
3. Extract the rar file ( MT11i Neov 4.1.B.0.587 India- By abhihtz.rar )
4. Copy the kernel ( MT11i Neov 4.1.B.0.587 India- By abhihtz.ftf ) and paste into C:\Flashtool\firmwares.
5. Now open FlashTool.exe and select mode 'Flashmode'.
6. Choose and Click OK..>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Then follow the instruction on pop up screen..
8. After flashing kernel unplug USB cabel and power on the device.
9. Plz wait until boot up...takes a long time....

well i have already rooted my phone and used various roms...i flashed the stock rom via flashtool and trid to install cwm by hotboot method.
well after i hotboot it doesn't go into recovery, the charging icon appears... plz helpp..!!

bZed94 said:
well i have already rooted my phone and used various roms...i flashed the stock rom via flashtool and trid to install cwm by hotboot method.
well after i hotboot it doesn't go into recovery, the charging icon appears... plz helpp..!!
Click to expand...
Click to collapse
for CWM try using "x parts" application from play store

cant root....!!!!???
after entering to cwm.......and i extracted the zip from sd card . but it stops and i pressed on reboot in cwm.
i found that the busybox had installed but there is no proper root access

The only solution to this problem is to flash a stock ics. Firmware on neo v through. Flashtool
Sent from my LT28h using xda premium
---------- Post added at 10:03 AM ---------- Previous post was at 09:49 AM ----------
You can try recovery x it worked for me and the cwm is working good no problem in entring in cwm
Sent from my LT28h using xda premium

Good afternoon guys.
This is my first post
I have the same problem with the guys above me,so since i found a thread with the same name,i thought i should use this,rather than creating a new thread.
So,i try to flash my phone but it says i must enable unknown sources and debuging,but this is not possible,since we are stuck on SONY logo.
SEUS says that my phone uses the latest software,so nothing there.
Also,im not sure if im flashing my phone the proper way,its been a while since i installed HD.
I used Xperia Ultimate HD 2.0.3
so,any help on booting my device?
If possible,i would like to suggest me a better HD version ( i downloaded 5 ) with the proper kernel version..
thank you in advance.

Flash a stock ftf firmware using Flashtool to your phone

SAMSUNG galaxy core(GT-I8262) recovery bootloop

so guys, i have a SAMSUNG GT-I8262 and it was rooted, i tried rooting again with farmaroot(older version) and selected install superSU and it went fine, then i restarted and it was also normal then when i opened supersu and it said it need to update su binary,so i continued with it, it asked me which method i want to use to update binary(normal or cwm) for a change i selected cwm.
i thought it would be automatic but it wasnt, then i thought to restarting phone and installing it normally but when it restarted, it again booted to recovery instead of loading os
i tried everything and still it boot up to recovery
i can go to BL but when i am there and connect phone to pc, odin dont detect my phone, i have samsung device driver installed but still odin do not detect it
i tried factory wipe but still it wont boot up the android
i had monster rom(by omkar)(build 2) installed on it and it was working ok
i also tried installing monster rom(build 3) from extsd card using cwm and it installed but still boots up to recovery
when i connect it to charger, it again boots up to recovery instead of showing charging sign(even when its turned off and i do not touch a single button)
now i want to fix this problem on my own(without giving it to repairman), please help me with it.
PLEASE REPLY ASAP
just to add, i have samsung tab 3 and odin detect it when connected. so this proves i have samsung driver installed

Try to fix permission in CWM and reboot ur phone
* EDIT: Always use the option "NORMAL" when SuperSU ask u for update binaries.

I don't know how to do that,
Will you please explain how to
Sent from my SM-T211 using xda app-developers app

It have cwm recovery v6.0.3.6 on it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-T211 using xda app-developers app

Please, someone reply with possible solution
Sent from my SM-T211 using xda app-developers app

Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app

sscsps said:
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Bro!! Is your phone detected by odin?? cause mine phone(Core gt-i8262) is not been detected by odin
I have the same problem of cwm bootloop .
plz reply fast !! thanks :good: and (sory for my bad english)

Dipesh[Coreboy] said:
Bro!! Is your phone detected by odin?? cause mine phone(Core gt-i8262) is not been detected by odin
I have the same problem of cwm bootloop .
plz reply fast !! thanks :good: and (sory for my bad english)
Click to expand...
Click to collapse
Yes, if yours don't detect then try uninstalling Samsung USB drive and then reinstalling it, it might work
And if it don't work then try different USB cable
And if neither of these works, then try different computer
Good luck, hope this help
Sent from my SM-T211 using XDA Free mobile app

recovery loop fixed
I had similar problem with CWM loop after failed SuperSU binary updates.
What worked for me, was to restore a CWM backup, WITH the charger plugged in.
It did not solve the problem without the charger, just keep getting the loop. Go figure... Strange, but this is what worked for me.

Guyyyzzzzzzz plzz help me..i am stuck in bootloop for Samsung galaxy core(gt-I8262).....I had rootd my phon a eek ago..i loved a lot...I tied installing cwm .......I installed it using rashr tool...it asked m fo a restart...I said ok..and its stuck in bootloop..now I want to gt out of hre as well I want to flash samyKAT on my phone..i had stock rom be4...plzz help me step by step...

sscsps said:
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Did you flash any custom recovery through odin or did you flash the stock recovery?
Please reply fast and also give links for any recovery for I8262 if you have any. I too got into bootloops and its booting back to CWM recovery, i tried everything,none is working.
Thanks:good:

I had installed cwm recovery on my gt-18262 it was succesfully done but now when I updated supersu from install zip option in cwm recovery but stuck in bootloop and isnt recognized by odin also plzzz plzzzz help im in struggle give a urgent repy

CWM bootloop fix
I had the same issue and I managed to fix it. I'll try to explain more detailed, but first some history (it has to do with the way I solved the issue):
I got the i8262 from my girlfriend as she (finally) bought a new phone and I decided, that I'll push this one to the limits (I saw that there is CM 11 for it and I decided to install). So I had to flash first custom recovery - there are two options here (as you may know): CWM and TWRP. There are plenty of tutorials how to do that on the internet. Most of them are using ODIN to flash, so I decided not to play it smart, but to use what most people use. So I downloaded USB drivers, ODIN and both CWM and TWRP. Unfortunately, when I try to flash with ODIN, on the phone I receive message saying "Signature Verification Failed" few seconds after the beginning and then phone reboots into Android. I tried both CWM and TWRP - they were both failing. So I decided to try with other ways to flash it - if your phone is rooted, then you can install custom recovery from the phone itself, without the need of a PC (great for me, as I don't have Windows). So I rooted the phone and tried a few programs until I found one that's working - Rashr - Flash Tool. I flashed CWM using it, it asked me to reboot in recovery mode, I said yes, and.... no getting out of the recovery mode. Not to mention that the menu was dancing when I used volume buttons to switch items... I read on one place, that system partition needs to be mounted everytime to evade this bootloop, but this didn't help for me.
The fix:
ODIN But not exactly how you imagine it. I followed again one of the may tutorials for ODIN, this time flashing TWRP. It failed again, but after failing ODIN reboots the phone properly!!! This allowed my to start Rashr again and to flash TWRP - it worked like a charm. No more bootlooping. No more funky menus. Hope I was helpful and happy hacking

[tutorial]How To Flash Lenovo a536 with Stock ROM using SP Flash Tool

Flash Lenovo a536 with Stock ROM using SP Flash Tool tutorial by Ashwin P M Nambiar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recently i got a notification on my Lenovo a536 saying system update(VIBE official update) is available. So as usual i kept for update, the update package was downloaded and phone booted into startup and started upgrading. Suddenly the upgrade got stuck and it was showing only one thing "No Command" on the screen with a Android Bot image. Without knowing what it was, i formatted the phone from startup menu. Later i came to know, my phone is dead. So i had to flash it with stock ROM again. I was not able to flash it with any ROM because my device was not rooted. So here is how i did it finally.
Requirements:
Lenovo a536 Stock ROM
USB VCOM Driver
SP Flash Tool
So once you've downloaded all the files, follow the below steps. Remember to charge your phone to 30-60 Mins before you start.
Step 1: Unzipping
Unzip all the downloaded files and keep it in different folders.
Step 2: Install the drivers
**This is a very important step. If the drivers are not up to date, nothing is gonna work**
Open the Device Manager in your PC.(Can be opened by typing Device Manager in start menu). Remove your phone battery, connect the phone to your PC/Laptop via USB cable. Make sure you use a good quality cable and the powerful port of your PC. Once you connect, your Device Manager will show up the connected device as Mediatek Preloader device.
Right click on it and click update driver. Click Browse Computer and navigate to the USB VCOM unzipped folder.(The device may flash on the list for seconds and vanish and again appear. So right click on the device before it disappears.)
Step 2: Flash the ROM
Once you install the Driver, next you can Flash the device.
Remove the connection and put the battery back. Do not switch on the device.
Open SP Flash Tool provided with the ROM package.(flash_tool.exe)
First Go to Options>>Options>>Download>>Check the box DA DL All with checksum.
Click on Scatter Loading and Choose the file MT6582_Android_scatter.txt in target_bin folder in the extracted file. I will add all the images to flash.
Change the Download only option to Firmware upgrade. and click on Download.
Now the Flash Tool will wait foe the device to connect. Now connect your device using USB cable with battery in but without switching on the phone. Download process will start.
Once it finishes you'll get a success screen as below.
That's it. You have successfully flashed your phone. Now you can Reboot your phone. It'll be same like before. You will be recieving the updates and once you update the system normally. Everything will be normal.
Possible Errors
Your Download process may get stopped due to many type of errors and many number of times. Still do not give up. If you're continuously getting error and the download process stops, try downloading without battery. (Remove the battery and connect the device with USB cable, during the above process.)
orginal source

RESERVED

My phone is stuck in boot loop !! NEED HELP !!

Cruger96 said:
My phone is stuck in boot loop !! NEED HELP !!
Click to expand...
Click to collapse
Please explain in detail.usually installing recovery part doesn't cause boot loop unless you didn't follow the steps correctly.Is it during flashing rom...?

do i have to use spflash tool to install custom rom or not just askin

Hi, I would like to ask you for advice. I was charging my non-rooted phone overnight and it somehow get into bootloop :/ The phone is Lenovo A536 with chip version MT6582_S01 and there is/was stock ROM A536_S186_150813_ROW (found from recovery).
First I tried to flash stock OTA ROM (the same version) via recovery from SD card and also via ADB but without success Now, I'm trying to flash stock ROM via SP flash tool v5.16.36. Problem is that I always remain stuck at red bar "Download DA 100%" and I can't get over this status. After 30 secs the errors usually appear "ERROR: S_FT_DOWNLOAD_FAIL (0xFA8)" :crying:
I tried both port versions: Mediatek DA USB VCOM and Mediatek Preloader USB VCOM, with and without battery and SD card, but nothing helped. I was not allowed a bootloader (I'm not sure whether I have to do it in the case of flashing of stock ROM).
Can you help me? Thx.
Update:
I used SP flash tool v5.1352.01 without manual installing USB drivers (installed automatically by windows) and now is SP flash tool working well (successfully flashed - green rign)
But after disconnecting usb and restart of phone, the phone is still in bootloop :crying:
I tried variety of stock ROMs, bud strange is, that when I look in recovery, there is still ROM A536_S186_150813_ROW and I haven't clue why...?! :/ Any suggestions?
Update 2:
I did a test of EMMC by SP flash tool and I got this error: S_DA_MT_DEDICATED_PATTERN_ERROR (3094)
So, it seems the phone's EMMC is corrupted :crying:
How can I handle a corrupt EMMC?

My mobile imei lost plz help

Sir my Phone is not booting. It is stuck and it is not charging also..
And its continuously giving error "Dram failed".....

Rajat1993 said:
Sir my Phone is not booting. It is stuck and it is not charging also..
And its continuously giving error "Dram failed".....
Click to expand...
Click to collapse
Reset your phone in recovery mode

Fersf said:
Hi, I would like to ask you for advice. I was charging my non-rooted phone overnight and it somehow get into bootloop :/ The phone is Lenovo A536 with chip version MT6582_S01 and there is/was stock ROM A536_S186_150813_ROW (found from recovery).
First I tried to flash stock OTA ROM (the same version) via recovery from SD card and also via ADB but without success Now, I'm trying to flash stock ROM via SP flash tool v5.16.36. Problem is that I always remain stuck at red bar "Download DA 100%" and I can't get over this status. After 30 secs the errors usually appear "ERROR: S_FT_DOWNLOAD_FAIL (0xFA8)" :crying:
I tried both port versions: Mediatek DA USB VCOM and Mediatek Preloader USB VCOM, with and without battery and SD card, but nothing helped. I was not allowed a bootloader (I'm not sure whether I have to do it in the case of flashing of stock ROM).
Can you help me? Thx.
Update:
I used SP flash tool v5.1352.01 without manual installing USB drivers (installed automatically by windows) and now is SP flash tool working well (successfully flashed - green rign)
But after disconnecting usb and restart of phone, the phone is still in bootloop :crying:
I tried variety of stock ROMs, bud strange is, that when I look in recovery, there is still ROM A536_S186_150813_ROW and I haven't clue why...?! :/ Any suggestions?
Update 2:
I did a test of EMMC by SP flash tool and I got this error: S_DA_MT_DEDICATED_PATTERN_ERROR (3094)
So, it seems the phone's EMMC is corrupted :crying:
How can I handle a corrupt EMMC?
Click to expand...
Click to collapse
I have seen this type error,EMMC h/w corruption,cant be solved unless you replace chip itself,Internal damage.

Where can i find legit lenovo firmware to flash it?

I have some problems with my phone.
I installed several custom roms and it's time to sell or give my phone to somebody. I got a new one.
Because every custom rom had bugs i decided to download a official stock rom from needrom.
I copied the rom on a card because the last custom rom was "eating" almost all my memory and when i tried to install it and surprise..failed..without any code error or something..
Can anyone help me?

demysek said:
I have some problems with my phone.
I installed several custom roms and it's time to sell or give my phone to somebody. I got a new one.
Because every custom rom had bugs i decided to download a official stock rom from needrom.
I copied the rom on a card because the last custom rom was "eating" almost all my memory and when i tried to install it and surprise..failed..without any code error or something..
Can anyone help me?
Click to expand...
Click to collapse
How you flashed your mobile I also need to flash what is the correct method and and what precaution should be considered?

Bricked phone without OS, without Recovery and ODIN won't flash anything.

Hello everyone.
I have a GT-S7582 that doesn't boot to system, it's bootlooping. Also, I can't acess the recovery mode, I had CWM before, and suddenly the phone stopped booting. I tried everything with ODIN and none of them worked;
- Flash Recovery (CWM, TWRP)
- Flash StockROM (Same model and localization)
- Flash PIT, CSC, CP, BL, and AP (all stock)
- Flash bootloader
- Different USB Cables (all legit, 850mA/h)
- Different Computers, different OS (Windows 7 and 10)
- Different versions of ODIN (1.85, 3.09, 3.10 and 3.12)
All of the tries resulted in the same errors in ODIN, either stuck at "Initializing" or "SetupConnection".
Samsung Drivers are installed;
ODIN recognizes phone as com3 or com9;
KIES is not installed;
I'm running ODIN as ADMIN;
Is my phone hardbricked?
Thanks.

have you ever try Z3x box

luanblur said:
Hello everyone.
I have a GT-S7582 that doesn't boot to system, it's bootlooping. Also, I can't acess the recovery mode, I had CWM before, and suddenly the phone stopped booting. I tried everything with ODIN and none of them worked;
Click to expand...
Click to collapse
1. download Odin v3.09 and not the latest version
2. Download USB drivers and Install from HERE
3. Download the stock rom with all the 4 files BL, AP, CP and CSC from HERE
4. Open Odin and select all the 4 files extracted from the firmware download and flash them
This should work..

I have the same problem with the same phone. The phone starts the installation, but it costs about 2/3 and will not go any further
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

luanblur said:
Hello everyone.
I have a GT-S7582 that doesn't boot to system, it's bootlooping. Also, I can't acess the recovery mode, I had CWM before, and suddenly the phone stopped booting. I tried everything with ODIN and none of them worked;
- Flash Recovery (CWM, TWRP)
- Flash StockROM (Same model and localization)
- Flash PIT, CSC, CP, BL, and AP (all stock)
- Flash bootloader
- Different USB Cables (all legit, 850mA/h)
- Different Computers, different OS (Windows 7 and 10)
- Different versions of ODIN (1.85, 3.09, 3.10 and 3.12)
All of the tries resulted in the same errors in ODIN, either stuck at "Initializing" or "SetupConnection".
Samsung Drivers are installed;
ODIN recognizes phone as com3 or com9;
KIES is not installed;
I'm running ODIN as ADMIN;
Is my phone hardbricked?
Thanks.
Click to expand...
Click to collapse
You need to remove the battery every time before installing

same is with me
i accidentally wiped 'internal storage' in TWRP and now the same is happening with me
---------- Post added at 07:08 PM ---------- Previous post was at 07:04 PM ----------
yohannacastle said:
1. download Odin v3.09 and not the latest version
2. Download USB drivers and Install from
3. Download the stock rom with all the 4 files BL, AP, CP and CSC from [UR
4. Open Odin and select all the 4 files extracted from the firmware download and flash them
This should work..
Click to expand...
Click to collapse
help!

luanblur said:
Hello everyone.
I have a GT-S7582 that doesn't boot to system, it's bootlooping. Also, I can't acess the recovery mode, I had CWM before, and suddenly the phone stopped booting. I tried everything with ODIN and none of them worked;
- Flash Recovery (CWM, TWRP)
- Flash StockROM (Same model and localization)
- Flash PIT, CSC, CP, BL, and AP (all stock)
- Flash bootloader
- Different USB Cables (all legit, 850mA/h)
- Different Computers, different OS (Windows 7 and 10)
- Different versions of ODIN (1.85, 3.09, 3.10 and 3.12)
All of the tries resulted in the same errors in ODIN, either stuck at "Initializing" or "SetupConnection".
Samsung Drivers are installed;
ODIN recognizes phone as com3 or com9;
KIES is not installed;
I'm running ODIN as ADMIN;
Is my phone hardbricked?
Thanks.
Click to expand...
Click to collapse
it seems u messed up partitions.. use pit file n try may help..
if not emmc failure.. hard brick.. death.. but if the phone is detected may have chance.. use pit file
solution shorting test point and use jtag

Sir .My phone gt s7582 is breaked.
Only red sign show.....

well i have a problemmm
I WAS TRYING TO INSTALL ANOTHER OS IN MY SAMSUNG GALAXY A5 2015 BUT I ACCIDENTALLY DIDNT BACKUP BEFORE INSTALLATION ,,, I WIPED SYSTEM AND EVERYTHING . IT SAYS INSTALLATION FAILED............
NOWWWWWWWWW WHATTTTTT
WITH GREAT DIFFICULTY I SOMEHOW ADDED A cyanogen mod zip to my internal storage.
but when installing it . again says installation failed and when i click on reboot , it says no os installedddd
well now i started to think its my twrp problm
twrp 3.0.2-1-ashynx
but how to change my twrp noww
how shud i go to odin mode????????
and btw there is no twrp img for samsung a5 2015 model in twrp official site.
CAN ANYONE HELPP ME
I NEEED HELP PLZZ.

user UTYA said:
well i have a problemmm
I WAS TRYING TO INSTALL ANOTHER OS IN MY SAMSUNG GALAXY A5 2015 BUT I ACCIDENTALLY DIDNT BACKUP BEFORE INSTALLATION ,,, I WIPED SYSTEM AND EVERYTHING . IT SAYS INSTALLATION FAILED............
NOWWWWWWWWW WHATTTTTT
WITH GREAT DIFFICULTY I SOMEHOW ADDED A cyanogen mod zip to my internal storage.
but when installing it . again says installation failed and when i click on reboot , it says no os installedddd
well now i started to think its my twrp problm
twrp 3.0.2-1-ashynx
but how to change my twrp noww
how shud i go to odin mode????????
and btw there is no twrp img for samsung a5 2015 model in twrp official site.
CAN ANYONE HELPP ME
I NEEED HELP PLZZ.
Click to expand...
Click to collapse
Flash stock rom

Which one

I tried apple 6s spark , cm 14 , lineage also , but didn't work

Now everything's fine bro , i basically went to Odin mode and flashed Samsung a5 .MD5 file and..... , It worked . Now my phone is absolutely fine . I.... Can't show my happiness in this chat ,but i am damn happy

luanblur said:
Hello everyone.
I have a GT-S7582 that doesn't boot to system, it's bootlooping. Also, I can't acess the recovery mode, I had CWM before, and suddenly the phone stopped booting. I tried everything with ODIN and none of them worked;
- Flash Recovery (CWM, TWRP)
- Flash StockROM (Same model and localization)
- Flash PIT, CSC, CP, BL, and AP (all stock)
- Flash bootloader
- Different USB Cables (all legit, 850mA/h)
- Different Computers, different OS (Windows 7 and 10)
- Different versions of ODIN (1.85, 3.09, 3.10 and 3.12)
All of the tries resulted in the same errors in ODIN, either stuck at "Initializing" or "SetupConnection".
Samsung Drivers are installed;
ODIN recognizes phone as com3 or com9;
KIES is not installed;
I'm running ODIN as ADMIN;
Is my phone hardbricked?
Thanks.
Click to expand...
Click to collapse
ies cud bi emmc fail but teres more advanced tools wich doesnt worth it so another good samsung mb change best deal

Realme C12 Stuck In BootLoop. Update: Fixed

Long Story Shot I flashed Magisk.zip using twrp.. My device was not booting in Android.. I did everything like flashing stock boot.img but nothing worked then I tryed to install stock recovery on my Realme C12 but when I flashed it.. Now my phone is not booting into anything.. I need get help.. Cant Boot into fast boot cause it keeps trying to get me into recovery mode. I think Reovery Image and Android Image are broken.. How can I fix or reboot to Fastboot Mode. HELP

RehanRashid said:
Long Story Shot I flashed Magisk.zip using twrp.. My device was not booting in Android.. I did everything like flashing stock boot.img but nothing worked then I tryed to install stock recovery on my Realme C12 but when I flashed it.. Now my phone is not booting into anything.. I need get help.. Cant Boot into fast boot cause it keeps trying to get me into recovery mode.. HELP
Click to expand...
Click to collapse
(read the whole thing before acting)
reflash everything except the data partition
if that fails, wipe all and reflash
if that fails, its the wrong stock firmware for your device's release
And if using android 11+ there are specific magisk files for them i bilieve

flairepathos.info said:
(read the whole thing before acting)
reflash everything except the data partition
if that fails, wipe all and reflash
if that fails, its the wrong stock firmware for your device's release
And if using android 11+ there are specific magisk files for them i bilieve
Click to expand...
Click to collapse
How can I reflash everything? I am stuck in bootloop how can I connect to adb.. The button that used to get me in Fastboot Mode now Boot In Recovery which is not booting to recovery cause it just keeps rebooting..

RehanRashid said:
How can I reflash everything? I am stuck in bootloop how can I connect to adb.. The button that used to get me in Fastboot Mode now Boot In Recovery which is not booting to recovery cause it just keeps rebooting..
Click to expand...
Click to collapse
There should be an engineer mode
so google search sp flash tool for your phone
or How to flash stock firmaware "name of phone" (phones name)
There will be easy guides

flairepathos.info said:
There should be an engineer mode
so google search sp flash tool for your phone
or How to flash stock firmaware "name of phone" (phones name)
There will be easy guides
Click to expand...
Click to collapse
Will this tool work even If I am in bootloop?

Thanks I will let you know if I face any trouble...

RehanRashid said:
Thanks I will let you know if I face any trouble...
Click to expand...
Click to collapse
You're welcome, please use the Thanks button if it works for you
Yes it should work once your phone is off,even during boot loop, the drivers will lock state in download mode
if Sp flash tools isnt working check with youtube which tool they are using

flairepathos.info said:
You're welcome, please use the Thanks button if it works for you
Yes it should work once your phone is off,even during boot loop, the drivers will lock state in download mode
if Sp flash tools isnt working check with youtube which tool they are using
Click to expand...
Click to collapse
The Flash Tool is not detecting the deviec.. In the device manage the phone is showing as OPPO Preloader and a Yellow Mark.. How can i fix this? I can also hear the phone disconnecting and connecting becuase of the bootloop

RehanRashid said:
The Flash Tool is not detecting the deviec.. In the device manage the phone is showing as OPPO Preloader and a Yellow Mark.. How can i fix this? I can also hear the phone disconnecting and connecting becuase of the bootloop
Click to expand...
Click to collapse
Sometime this..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I made it work somehow but I get this error.. Please Help

RehanRashid said:
I made it work somehow but I get this error..
View attachment 5400667
Click to expand...
Click to collapse
Try these Stock firmware / stock rom for Realme c12
Software Update
Update the latest software version on your Realme phone.
www.realme.com
REALME C12 RMX2189 FLASH FILE (STOCK ROM)
Realme C12 RMX2189 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock
www.gsmmafia.com
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com

I am using this Stock Rom. I need to fix the error.. I cant afford another phone.. Let me know any alternative software, which are easy to use
REALME C12 RMX2189 FLASH FILE (STOCK ROM)
Realme C12 RMX2189 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock
www.gsmmafia.com

I am getting the same error.. Tried Everything

I want soloution for this error.. Device: Realme C12

[Deleted]

Omg Thanks.. My phone is just like brand new.. I was getting the error because I did not Disable MTK Flash Security!!!!!!!!!

Sir, quick question where did you get the mtk scatter text like that on the image? Because the thing happened to you is the same happened to me right now

adayao said:
Sir, quick question where did you get the mtk scatter text like that on the image? Because the thing happened to you is the same happened to me right now
Click to expand...
Click to collapse
You can download it from anywhere search " Download MT6765 Scatter file " you will get it.. or visit this website https://www.bypassfrpfiles.com/2021/03/mediatek-scatter-file/

RehanRashid said:
Omg Thanks.. My phone is just like brand new.. I was getting the error because I did not Disable MTK Flash Security!!!!!!!!!
Click to expand...
Click to collapse
uhhm hello sir, can you tell me the step-by-step on how you did it? I have exactly the same problem that you had and I'm having a hard time finding the solution for it. I'm really gonna be f up if I lost this phone haha. please help...

Jiboi said:
uhhm hello sir, can you tell me the step-by-step on how you did it? I have exactly the same problem that you had and I'm having a hard time finding the solution for it. I'm really gonna be f up if I lost this phone haha. please help...
Click to expand...
Click to collapse
Download the firmware for your devices for Realme's Offical website. Install all the required drivers. And Download Sp Flash Tool and MTK Bypass and then:
Load the Scatter and Auth File. And click Download
Run MTK Bypass and click bypass
Connect the phone to pc while holding both power buttons
And Wait!