Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
I also face same problem some time..
flash stock JB with SP tool
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
Hi, looks to me like some problem with the recovery. You should calm down and try re-flashing the recovery properly either with Mobile Uncle, or if it does not work then try to do it with the SP Flash Tool.. Follow the instructions given in the thread and see if it works.. :good:
And while you are at it, you might want to re-flash the ROM with SP Flash tool perhaps that could help..
Reflashing entire rom will solve the problem. Re-install the drivers and the try it phone is detected to the tool.
ekhasti said:
I also face same problem some time..
flash stock JB with SP tool
Click to expand...
Click to collapse
I will do it thanks buddy.
ibshar said:
Hi, looks to me like some problem with the recovery. You should calm down and try re-flashing the recovery properly either with Mobile Uncle, or if it does not work then try to do it with the SP Flash Tool.. Follow the instructions given in the thread and see if it works.. :good:
And while you are at it, you might want to re-flash the ROM with SP Flash tool perhaps that could help..
Click to expand...
Click to collapse
I tried everything buddy. Thinking to flash Stock JB rom first.
bsuhas said:
Reflashing entire rom will solve the problem. Re-install the drivers and the try it phone is detected to the tool.
Click to expand...
Click to collapse
I will re-install the JB ROM first then your MOD.
For all of you:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disturbed™ said:
For all of you:
Click to expand...
Click to collapse
lol! :laugh:
Hey bro,
i got the same problem few days ago,,, dont worry,, just download the STOCK recovery image of mmx110 and install it via mobile uncles and then OFF and ON phone and then flash CWM with mobile uncle and after installation don't choose to go in recovery mode,,,, and then off your mobile and try to go in CWM and see it will work
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
Disturbed™ said:
Guys I am in trouble now. I am not able to boot in recovery.
Here what is happpened:
I am on SUVI ROM & wanted to flash new ROM. So I just Factory Reset the mobile using Setting. Now, as and when Go to recovery, My phone automatically start formatting my phone & then it reboot. I tried to flash new recovery using mobile uncle but all in Vain. Phone boot into recovery & format my mobile again.
Then I tried to flash recovery using SP tools but it doesn't detect my phone & stay over EMMC | Searching |.
Please do the needful. I am not ready to go to Service center coz my warranty is over.
Please guys help me.
Click to expand...
Click to collapse
First of all don't Panic and Stay Calm.
I have been in the exact same situation. SP Tools was not detecting my Canvas 2 as well. In a Thread at XDA I found the Solution. Switch off the Mobile, remove Battery, and then connect to PC via USB cable and press and hold the Volume + button.
Refer the Link below, Meta Mode
http://forum.xda-developers.com/showthread.php?t=2167244
There is a permanent method of installing drivers also instead of going every time meta mod
Just follow this thread....
Link: http://forum.xda-developers.com/showthread.php?t=2370906
Also u can flash stock recovery to get rid of this and den flash cwm later.... instead of flashing a whole new rom.
Thanks Guys. I Found the problem actually. It was Data cable problem. Changed it today & flashed it. Done. :highfive::good:
Hi! Thanks a ton. Solved my problem in a jiffy.
Related
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
sandeeptikoo said:
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
Flash a stock ftf firmware using Flashtool to your phone
Sent from my SK17i using xda premium
again stuck
UchihaDareNial said:
Flash a stock ftf firmware using Flashtool to your phone
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Yessss itt worked... thanks
I flashed it with .431 Firmware Ware fft and It started up
and then flashed kernel .562 Kernel fft and them Rooted again
and then flashed recovery ClockWorkMod Recovery 5.0.2.7-nAa-r2
Phone was normal then
Bootloader is Unlocked
But whenever i try to install any custom Rom it again Stucks with the same problem at SONY boot logo.
I tried to install;
neoAokpV0.1-10-9 --- Stuck on the boot logo after reboot
JJHybrid_ROM_3.2_Stable_AOSP_ROMControl_NEO -- Stuck on the boot logo after reboot
Can you suggest any good solution.
This is my Wife's phone she's gonna kill me ...
sandeeptikoo said:
Yessss itt worked... thanks
I flashed it with .431 Firmware Ware fft and It started up
and then flashed kernel .562 Kernel fft and them Rooted again
and then flashed recovery ClockWorkMod Recovery 5.0.2.7-nAa-r2
Phone was normal then
Bootloader is Unlocked
But whenever i try to install any custom Rom it again Stucks with the same problem at SONY boot logo.
I tried to install;
neoAokpV0.1-10-9 --- Stuck on the boot logo after reboot
JJHybrid_ROM_3.2_Stable_AOSP_ROMControl_NEO -- Stuck on the boot logo after reboot
Can you suggest any good solution.
This is my Wife's phone she's gonna kill me ...
Click to expand...
Click to collapse
Make sure you flash the right kernel to use the custom rom,and after you flashed the custom rom in CWM Recovery,make sure to wipe data,factory reset,wipe cache partition,and wipe dalvik cache.After that,restart the phone as usual,and the first boot might take a while...
NOTICE : If the time of the custom rom flashing is freaking fast (around 10 seconds),then go to advance,and choose fix permission and start to flash again
Sent from my SK17i using xda premium
successor crealet
same problem as above
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/how...ed-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1686041
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.and the computer is not even detecting it what to do please help
Kindly help me guys.. Need my phone back
tejasvi1 said:
same problem as above
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/how...ed-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1686041
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.and the computer is not even detecting it what to do please help
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
When you install that rom,have you install its specific custom kernel?
Sent from my SK17i using xda premium
if you are talking about boot image than no what can i do please help
if your bootloader is unlocked you cannot install a custom rom. You must unlock your bootloader but you lose your warranty. Read this http://forum.xda-developers.com/showthread.php?t=1568792
Xperia neo
i unlocked my bootloader, then using hotboot method flashed nightelf's kernel by hootboot method and then used it with icecream pureness rom for sometime. later i wanted to format the system completely, so i selected format user data in CWM and tried flashing the rom again.but while flashing it got stuck for a long time. i removed the battery and switched it back on and it didnt start up. i flashed a global .587 ftf using flashtool.
Flastool status shows bootloader status unlocked and rooted but when i press the root button , it shows root hack failed and super su is not installed.. please help...
And whatever kernel i try to flash it gets stuck in the sony logo...
sandeeptikoo said:
Hi Genius Developers, Need help
I rooted my Sony Experia Neo V phone using using this link; ( My Bootloader is Locked)
http://theunlockr.com/2012/06/18/ho...nning-android-4-0-4-with-a-locked-bootloader/
Rooted successfully and phone was working normal with Superuser installed.
But later i tried to install some Custom ROM from:
http://forum.xda-developers.com/showthread.php?t=1613017
Now my phone is stuck on SONY boot logo and it dosent start up. Tried may stupid things but all in vain.
Cant even turn it on.
Kindly help me guys.. Need my phone back
Click to expand...
Click to collapse
Dummies Present
[SOLVED]Neo V stuck in Bootloader (Sony Logo)
Hi all..here I can help.. >>
1. Download and install Flashtool here : http://androxyde.github.com/
2. Download kernel : http://depositfiles.com/files/zlh1aa1eg
3. Extract the rar file ( MT11i Neov 4.1.B.0.587 India- By abhihtz.rar )
4. Copy the kernel ( MT11i Neov 4.1.B.0.587 India- By abhihtz.ftf ) and paste into C:\Flashtool\firmwares.
5. Now open FlashTool.exe and select mode 'Flashmode'.
6. Choose and Click OK..>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Then follow the instruction on pop up screen..
8. After flashing kernel unplug USB cabel and power on the device.
9. Plz wait until boot up...takes a long time....
well i have already rooted my phone and used various roms...i flashed the stock rom via flashtool and trid to install cwm by hotboot method.
well after i hotboot it doesn't go into recovery, the charging icon appears... plz helpp..!!
bZed94 said:
well i have already rooted my phone and used various roms...i flashed the stock rom via flashtool and trid to install cwm by hotboot method.
well after i hotboot it doesn't go into recovery, the charging icon appears... plz helpp..!!
Click to expand...
Click to collapse
for CWM try using "x parts" application from play store
cant root....!!!!???
after entering to cwm.......and i extracted the zip from sd card . but it stops and i pressed on reboot in cwm.
i found that the busybox had installed but there is no proper root access
The only solution to this problem is to flash a stock ics. Firmware on neo v through. Flashtool
Sent from my LT28h using xda premium
---------- Post added at 10:03 AM ---------- Previous post was at 09:49 AM ----------
You can try recovery x it worked for me and the cwm is working good no problem in entring in cwm
Sent from my LT28h using xda premium
Good afternoon guys.
This is my first post
I have the same problem with the guys above me,so since i found a thread with the same name,i thought i should use this,rather than creating a new thread.
So,i try to flash my phone but it says i must enable unknown sources and debuging,but this is not possible,since we are stuck on SONY logo.
SEUS says that my phone uses the latest software,so nothing there.
Also,im not sure if im flashing my phone the proper way,its been a while since i installed HD.
I used Xperia Ultimate HD 2.0.3
so,any help on booting my device?
If possible,i would like to suggest me a better HD version ( i downloaded 5 ) with the proper kernel version..
thank you in advance.
Flash a stock ftf firmware using Flashtool to your phone
so guys, i have a SAMSUNG GT-I8262 and it was rooted, i tried rooting again with farmaroot(older version) and selected install superSU and it went fine, then i restarted and it was also normal then when i opened supersu and it said it need to update su binary,so i continued with it, it asked me which method i want to use to update binary(normal or cwm) for a change i selected cwm.
i thought it would be automatic but it wasnt, then i thought to restarting phone and installing it normally but when it restarted, it again booted to recovery instead of loading os
i tried everything and still it boot up to recovery
i can go to BL but when i am there and connect phone to pc, odin dont detect my phone, i have samsung device driver installed but still odin do not detect it
i tried factory wipe but still it wont boot up the android
i had monster rom(by omkar)(build 2) installed on it and it was working ok
i also tried installing monster rom(build 3) from extsd card using cwm and it installed but still boots up to recovery
when i connect it to charger, it again boots up to recovery instead of showing charging sign(even when its turned off and i do not touch a single button)
now i want to fix this problem on my own(without giving it to repairman), please help me with it.
PLEASE REPLY ASAP
just to add, i have samsung tab 3 and odin detect it when connected. so this proves i have samsung driver installed
Try to fix permission in CWM and reboot ur phone
* EDIT: Always use the option "NORMAL" when SuperSU ask u for update binaries.
I don't know how to do that,
Will you please explain how to
Sent from my SM-T211 using xda app-developers app
It have cwm recovery v6.0.3.6 on it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-T211 using xda app-developers app
Please, someone reply with possible solution
Sent from my SM-T211 using xda app-developers app
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
sscsps said:
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Bro!! Is your phone detected by odin?? cause mine phone(Core gt-i8262) is not been detected by odin
I have the same problem of cwm bootloop .
plz reply fast !! thanks :good: and (sory for my bad english)
Dipesh[Coreboy] said:
Bro!! Is your phone detected by odin?? cause mine phone(Core gt-i8262) is not been detected by odin
I have the same problem of cwm bootloop .
plz reply fast !! thanks :good: and (sory for my bad english)
Click to expand...
Click to collapse
Yes, if yours don't detect then try uninstalling Samsung USB drive and then reinstalling it, it might work
And if it don't work then try different USB cable
And if neither of these works, then try different computer
Good luck, hope this help
Sent from my SM-T211 using XDA Free mobile app
recovery loop fixed
I had similar problem with CWM loop after failed SuperSU binary updates.
What worked for me, was to restore a CWM backup, WITH the charger plugged in.
It did not solve the problem without the charger, just keep getting the loop. Go figure... Strange, but this is what worked for me.
Guyyyzzzzzzz plzz help me..i am stuck in bootloop for Samsung galaxy core(gt-I8262).....I had rootd my phon a eek ago..i loved a lot...I tied installing cwm .......I installed it using rashr tool...it asked m fo a restart...I said ok..and its stuck in bootloop..now I want to gt out of hre as well I want to flash samyKAT on my phone..i had stock rom be4...plzz help me step by step...
sscsps said:
Will it's fixed now, I tried odin on other laptop
Flashed recovery again and it's fixed!
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Did you flash any custom recovery through odin or did you flash the stock recovery?
Please reply fast and also give links for any recovery for I8262 if you have any. I too got into bootloops and its booting back to CWM recovery, i tried everything,none is working.
Thanks:good:
I had installed cwm recovery on my gt-18262 it was succesfully done but now when I updated supersu from install zip option in cwm recovery but stuck in bootloop and isnt recognized by odin also plzzz plzzzz help im in struggle give a urgent repy
CWM bootloop fix
I had the same issue and I managed to fix it. I'll try to explain more detailed, but first some history (it has to do with the way I solved the issue):
I got the i8262 from my girlfriend as she (finally) bought a new phone and I decided, that I'll push this one to the limits (I saw that there is CM 11 for it and I decided to install). So I had to flash first custom recovery - there are two options here (as you may know): CWM and TWRP. There are plenty of tutorials how to do that on the internet. Most of them are using ODIN to flash, so I decided not to play it smart, but to use what most people use. So I downloaded USB drivers, ODIN and both CWM and TWRP. Unfortunately, when I try to flash with ODIN, on the phone I receive message saying "Signature Verification Failed" few seconds after the beginning and then phone reboots into Android. I tried both CWM and TWRP - they were both failing. So I decided to try with other ways to flash it - if your phone is rooted, then you can install custom recovery from the phone itself, without the need of a PC (great for me, as I don't have Windows). So I rooted the phone and tried a few programs until I found one that's working - Rashr - Flash Tool. I flashed CWM using it, it asked me to reboot in recovery mode, I said yes, and.... no getting out of the recovery mode. Not to mention that the menu was dancing when I used volume buttons to switch items... I read on one place, that system partition needs to be mounted everytime to evade this bootloop, but this didn't help for me.
The fix:
ODIN But not exactly how you imagine it. I followed again one of the may tutorials for ODIN, this time flashing TWRP. It failed again, but after failing ODIN reboots the phone properly!!! This allowed my to start Rashr again and to flash TWRP - it worked like a charm. No more bootlooping. No more funky menus. Hope I was helpful and happy hacking
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Methodes
SD UPGRADE
SP FLASH TOOL
STOCK RECOVERY
Huawei Honor Holly Stock/Official Frimware
Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip
Holly-U19V100R001C328B107.rar Direct link
File Contants.
OTA upgrade.
SD card upgrade.
upgrade tools& drivers.
USB upgrade.
Let's Start.
1.SD UPGRADE METHOD
Downloade the "Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip" Extract the file any one location.
Locate the extracted folder and find the software folder.
Goto SD Upgrade Folder Copy the update.zip file To SD card.
Goto System updates Click Local Update and press Next.
Now automatically flashing is started.
2.SP FLASH TOOL METHOD
Install the USB Drivers If they are not already installed on your PC.
Extract out all the files of SP flash too, and double-click on Flash_Tool.exe to open it.
Click On the scatter loading button and select the “Scatter File” that you just downloaded. The real name of the file is “MT6582_Android_scatter_emmc.txt”.
Check the all items are clicked.
and Press download button.
Pull out the device’s battery, and while it’s turned off connect it to your computer via USB cable.
And download started.
when you see Green color tick mark then Disconnect the mobile.
Lets Switch On the mobile.
3.STOCK RECOVERY METHOD
Copy the update.zip to sdcard.
Power off the Mobile.
Now pull the Volume up + Volume Down + Power Button to goto Recovery Mode.
Now You See Stock recovery then goto install from sd card option.
select internal or extranal sd card for copyed update.zip file
and select the update.zip file.
and press yes to flash the Update.
Reserved 1 for pictures
Reserved 2 for Videos
going to Recovery
the steps for going to recovery are:
1.power on the device with vol+ and power
2.after the vibration release power and press vol+ 15 times
3.then press Vol-
then you are in recovery..
you can press the down button twice to get into fast boot mode
BlueFireX22 said:
the steps for going to recovery are:
1.power on the device with vol+ and power
2.after the vibration release power and press vol+ 15 times
3.then press Vol-
then you are in recovery..
you can press the down button twice to get into fast boot mode
Click to expand...
Click to collapse
you using Honor Holly Mobile ??
Panneer Selvam said:
you using Honor Holly Mobile ??
Click to expand...
Click to collapse
yes dude ..thats the only way i can get into recovery
BlueFireX22 said:
yes dude ..thats the only way i can get into recovery
Click to expand...
Click to collapse
but my honor holly mobile is vol+ and vol - and power button...
Panneer Selvam said:
but my honor holly mobile is vol+ and vol - and power button...
Click to expand...
Click to collapse
Strange ..
its okay dude .. keep the same instructions ..
let other people also test..
then we'll know..
Cheers For your Hardwork :good::good::fingers-crossed:
Hi,
thanks for the instruction. It works like a charm and I may confirm that holding vol+, vol- and power get you into stock recovery.
Does anyone know if there is another stock rom version available? I've recognized that the stock rom version above is only english localized and I'm searching for an european localization.
so long greetz
Auto shutdown
MY HUAWEI honor holly ( 3c lite) my phone was stock in logo i try to hard reset but didnt work because my phone was rooted... i update my phone using sd card... update was finished then after that i restart and my phone was auto shutdown.... how can i solve this issue???
yeohaeng said:
MY HUAWEI honor holly ( 3c lite) my phone was stock in logo i try to hard reset but didnt work because my phone was rooted... i update my phone using sd card... update was finished then after that i restart and my phone was auto shutdown.... how can i solve this issue???
Click to expand...
Click to collapse
i want your mobilr model number and build number...?
Panneer Selvam said:
i want your mobilr model number and build number...?
Click to expand...
Click to collapse
can i use this to fix my phone? i cant enter the recovery mode
how to remove cmw
how to remove cmw from honory holly and can u pls give ss of flashing from sd card?
Stuck in Boot loop.
I tried flashing CWM with Flashify, I got flashed but did not boot into it.
So i tried TWRP, same thing happend again.
Finally I have downloaded Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip
from the main site. And followed all the instructions given inside the guide.
I successfully flashed the firmware again. But now phone is not booting. Its stuck in boot loop(boots every 15sec).
What should i do? its urgent please help!!
Did holly will have lolipop update?
lfernandeshack said:
Did holly will have lolipop update?
Click to expand...
Click to collapse
no till now
kapilmahawar said:
I tried flashing CWM with Flashify, I got flashed but did not boot into it.
So i tried TWRP, same thing happend again.
Finally I have downloaded Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip
from the main site. And followed all the instructions given inside the guide.
I successfully flashed the firmware again. But now phone is not booting. Its stuck in boot loop(boots every 15sec).
What should i do? its urgent please help!!
Click to expand...
Click to collapse
again flash boot.img and recovery.img files only to geting into the recovery mode!
sam837 said:
how to remove cmw from honory holly and can u pls give ss of flashing from sd card?
Click to expand...
Click to collapse
MTK Devices are not support the sd image file flashing methods some devices are working but hhh is not working.
you can only flash via PC with SP FLASH TOOL..
HHH3CLITE said:
can i use this to fix my phone? i cant enter the recovery mode
Click to expand...
Click to collapse
ya .
you can only flash HHH Stock Recovery to recovery mode .
use SP FLASH TOOL
thanks
Panneer Selvam said:
MTK Devices are not support the sd image file flashing methods some devices are working but hhh is not working.
you can only flash via PC with SP FLASH TOOL..
Click to expand...
Click to collapse
thanks for replying. i flashed using flashfy the stock recovery of HHH
I bricked my phone while flashing It does not boot or go to cwm recovery mode. It is detected by pc. What to do????
Model of phone: Micromax unite 2
Flash Stock rom.....
http://www.skyneel.com/2014/11/how-to-flash-stock-rom-on-micromax-a106-unite-2.html
Don't forget to thanks. :thumbup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Error what to do now
DrakeDrago said:
View attachment 3177846
Error what to do now
Click to expand...
Click to collapse
Install proper driver
flash the correct version
DrakeDrago said:
I bricked my phone while flashing It does not boot or go to cwm recovery mode. It is detected by pc. What to do????
Model of phone: Micromax unite 2
Click to expand...
Click to collapse
Note there is three version of the OS Android see which version is loaded on your device check it by the sticker behind the battery search for a simialar rom
I flashed with the current here is the http://gaming.netalien.biz/2015/04/bricked-micromax-a106-how-to-unbrick.html hope this would help
Having the same issue...........
But even none of the drivers work properly with ma device...
Phone bricked while doing factory recovery after lollipop update
Please anybody help me out
the sp tool wont do anything even if i connect my phone with a usb to my comp... it just like freezes there... help!:crying:
Bricked My Unite 2 While installing Lollipop OTA Update using SP Flash Tool, Now phone is not Starting nor PC detect it. On Flashing with SP FlashTool , SP Flash Tool Starts (NOT RESPONDING) & PC gives error "USB Device Not Recognized"
please Help me to solve this problem.
Well Its hard bricked guys please tell me how to fix it...
I really want my phone back to normal it has been more than a month now since my phone got hard bricked!... pleasee......
MasterD.Ace said:
Well Its hard bricked guys please tell me how to fix it...
I really want my phone back to normal it has been more than a month now since my phone got hard bricked!... pleasee......
Click to expand...
Click to collapse
Try this www .micromaxunite2 . net/soft-brick-vs-hard-bricked-vs-broken
remove spaces
i flash this phone using flash tool and scatter file.. and selecting format+download option.. after flashing set is dead.. but it showing com port.. please help to solve this problem..
Hi all!!
Plz help me as my phone is hard bricked! I updated LP through OTA however after upgrade I went to recovery mode as SIM card were not detected! Hence I cleared the cache partition and now phone will not start nor able to connect it to PC! I tried Drakedragos link! However m unable to flash my phone! Plz help....
I have bricked my phone and only phone logo is coming ... What should I do 2 recover my phone.?? Pls help.. My mobile model is : Micromax unite 2
guys I have micromax unite2 a106 phone. I tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.Or gv me CWM for lollipop version....????????
This is how you should install the drivers!
DrakeDrago said:
View attachment 3177846
Error what to do now
Click to expand...
Click to collapse
Did you get the solution...
Same issue here
Cache mount issue in recovery mode
After flashing Successfully darkl l custom Rom I am facing the problem. The Rom had been flashed correctly and after that I was trying to flash super. Su zip file by Phil recovery. And then these messages poped up
"E:can't mount /cache/recovery log"
"E:can't open/cache/recovery log "
E. T.C
After that I am stuck at boot logo and can't flash anything. Is there any solution. Plzzzz help.
My phone is not detected by pc in sp flash tool nothing happens when i insert my phone help guys UNITE 2
A106 bricked
I bricked my a106. Its detected bys SP flash tool and by my PC. I tried flashing it with stock ROM and SP flash tool showed a green circle. But my phone is not charging not boots. But it's detected by PC and SP flash tool. What to do? Please help!!
Altair827 said:
I bricked my a106. Its detected bys SP flash tool and by my PC. I tried flashing it with stock ROM and SP flash tool showed a green circle. But my phone is not charging not boots. But it's detected by PC and SP flash tool. What to do? Please help!!
Click to expand...
Click to collapse
I am also bricked it many times .now using cm 13 by temasek no issues.
Long Story Shot I flashed Magisk.zip using twrp.. My device was not booting in Android.. I did everything like flashing stock boot.img but nothing worked then I tryed to install stock recovery on my Realme C12 but when I flashed it.. Now my phone is not booting into anything.. I need get help.. Cant Boot into fast boot cause it keeps trying to get me into recovery mode. I think Reovery Image and Android Image are broken.. How can I fix or reboot to Fastboot Mode. HELP
RehanRashid said:
Long Story Shot I flashed Magisk.zip using twrp.. My device was not booting in Android.. I did everything like flashing stock boot.img but nothing worked then I tryed to install stock recovery on my Realme C12 but when I flashed it.. Now my phone is not booting into anything.. I need get help.. Cant Boot into fast boot cause it keeps trying to get me into recovery mode.. HELP
Click to expand...
Click to collapse
(read the whole thing before acting)
reflash everything except the data partition
if that fails, wipe all and reflash
if that fails, its the wrong stock firmware for your device's release
And if using android 11+ there are specific magisk files for them i bilieve
flairepathos.info said:
(read the whole thing before acting)
reflash everything except the data partition
if that fails, wipe all and reflash
if that fails, its the wrong stock firmware for your device's release
And if using android 11+ there are specific magisk files for them i bilieve
Click to expand...
Click to collapse
How can I reflash everything? I am stuck in bootloop how can I connect to adb.. The button that used to get me in Fastboot Mode now Boot In Recovery which is not booting to recovery cause it just keeps rebooting..
RehanRashid said:
How can I reflash everything? I am stuck in bootloop how can I connect to adb.. The button that used to get me in Fastboot Mode now Boot In Recovery which is not booting to recovery cause it just keeps rebooting..
Click to expand...
Click to collapse
There should be an engineer mode
so google search sp flash tool for your phone
or How to flash stock firmaware "name of phone" (phones name)
There will be easy guides
flairepathos.info said:
There should be an engineer mode
so google search sp flash tool for your phone
or How to flash stock firmaware "name of phone" (phones name)
There will be easy guides
Click to expand...
Click to collapse
Will this tool work even If I am in bootloop?
Thanks I will let you know if I face any trouble...
RehanRashid said:
Thanks I will let you know if I face any trouble...
Click to expand...
Click to collapse
You're welcome, please use the Thanks button if it works for you
Yes it should work once your phone is off,even during boot loop, the drivers will lock state in download mode
if Sp flash tools isnt working check with youtube which tool they are using
flairepathos.info said:
You're welcome, please use the Thanks button if it works for you
Yes it should work once your phone is off,even during boot loop, the drivers will lock state in download mode
if Sp flash tools isnt working check with youtube which tool they are using
Click to expand...
Click to collapse
The Flash Tool is not detecting the deviec.. In the device manage the phone is showing as OPPO Preloader and a Yellow Mark.. How can i fix this? I can also hear the phone disconnecting and connecting becuase of the bootloop
RehanRashid said:
The Flash Tool is not detecting the deviec.. In the device manage the phone is showing as OPPO Preloader and a Yellow Mark.. How can i fix this? I can also hear the phone disconnecting and connecting becuase of the bootloop
Click to expand...
Click to collapse
Sometime this..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I made it work somehow but I get this error.. Please Help
RehanRashid said:
I made it work somehow but I get this error..
View attachment 5400667
Click to expand...
Click to collapse
Try these Stock firmware / stock rom for Realme c12
Software Update
Update the latest software version on your Realme phone.
www.realme.com
REALME C12 RMX2189 FLASH FILE (STOCK ROM)
Realme C12 RMX2189 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock
www.gsmmafia.com
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com
I am using this Stock Rom. I need to fix the error.. I cant afford another phone.. Let me know any alternative software, which are easy to use
REALME C12 RMX2189 FLASH FILE (STOCK ROM)
Realme C12 RMX2189 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock
www.gsmmafia.com
I am getting the same error.. Tried Everything
I want soloution for this error.. Device: Realme C12
[Deleted]
Omg Thanks.. My phone is just like brand new.. I was getting the error because I did not Disable MTK Flash Security!!!!!!!!!
Sir, quick question where did you get the mtk scatter text like that on the image? Because the thing happened to you is the same happened to me right now
adayao said:
Sir, quick question where did you get the mtk scatter text like that on the image? Because the thing happened to you is the same happened to me right now
Click to expand...
Click to collapse
You can download it from anywhere search " Download MT6765 Scatter file " you will get it.. or visit this website https://www.bypassfrpfiles.com/2021/03/mediatek-scatter-file/
RehanRashid said:
Omg Thanks.. My phone is just like brand new.. I was getting the error because I did not Disable MTK Flash Security!!!!!!!!!
Click to expand...
Click to collapse
uhhm hello sir, can you tell me the step-by-step on how you did it? I have exactly the same problem that you had and I'm having a hard time finding the solution for it. I'm really gonna be f up if I lost this phone haha. please help...
Jiboi said:
uhhm hello sir, can you tell me the step-by-step on how you did it? I have exactly the same problem that you had and I'm having a hard time finding the solution for it. I'm really gonna be f up if I lost this phone haha. please help...
Click to expand...
Click to collapse
Download the firmware for your devices for Realme's Offical website. Install all the required drivers. And Download Sp Flash Tool and MTK Bypass and then:
Load the Scatter and Auth File. And click Download
Run MTK Bypass and click bypass
Connect the phone to pc while holding both power buttons
And Wait!