Database Info

Install CWM Recovery in Lava iris 458q

Note- Before doing this, please ROOT your Lava Iris 458q. for rooting check this link
http://forum.xda-developers.com/showthread.php?p=49976717#post49976717
link to Download necessary file https://drive.google.com/folderview?id=0B74Xjste8p2VNmZGQWxvNTAteWc&usp=sharing
Note:-Please put all this in one singe folder)
Instructions:-
1. Install all Drivers inside that downloaded folder.
2. Put your phone in USB debugging mode from Developer Options in the Settings Menu. (If you cant find the Developer options, go to Settings> About Phone and tap the "build number" 8 times.)
3.Connect your phone to the computer. (In USB storage mode)
4. Open MtkDroidtools.exe from the folder MTK droid tools you downloaded before.
5. Wait till the device is detected (on the bar at the bottom)
6.Click on the ROOT button. and wait till the process is done.
7. Now go to the "root,backup,recovery" Tab.
8. from the 2nd box, select the option "To choose the boot.img file"
9.Click on the button "Recovery and Boot" and choose the Boot.img file downloaded before.
10. Click YES on the next popup asking Automatic CWM and YES on ALL the following popups.
After Reboot, the phone is successfully in CWM recovery MODE !!! (Use Volume up and down buttons to navigate and Power button as Enter)
Now that you have install CWM,
Note:-use windows 7 or lower version windows

Alternate Method
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:

yes it perfectly worked and rooted my phone.

patel_s said:
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
Click to expand...
Click to collapse
Can u provide rooting method for lava iris x1 because vroot method is not working... It has KitKat running on it.
Sent from my iris X1 using XDA Free mobile app

Xolo Q2000 Development [ Rooting & Rom List]

NOTE: This tutorial is for rooting Xolo Q2000. These are the instructions to root Xolo Q2000 using Motochopper Tool on your Windows Computer.
Easiest and Safest Method
NO DATA LOSS
Your Warranty will be void after rooting
Credits: Full Credits goes to DAN ROSENBERG
Requirement:
1. Ofcourse Xolo Q2000 Handset.
2. Atleast 50% battery
3. Your Brain
4. Some Patience.
Step 1: Download and extract Xolo Q2000 USB driver on your computer.
Step 2: Enable USB debugging on your handset. To Enable: Setting > Development > USB Debugging (Tick to Enable it)
To show Development Option in Setting menu just go to Setting > About Phone > Build Number (Tap on it 5-8 time to enable developer mode)
Step 3: Connect Xolo Q2000 to ur computer and install usb driver.
Step 4. Download and Extract Motochopper tool on your computer. After Extracting files, Open run.bat file.
A black screen will pop up, now press any key from keyboard to start rooting process.
Once rooting is complete, you will see a success message. Again press any key to continue.
Your phone will Restart automatically.
Now your XOLO Q2000 is successfully rooted.
To verify, Open application menu on your smartphone and see the SuperSU app installed. :good::good::good:
UNROOT: Open SuperSU> Settings > Full Unroot.

Need stock recovery image
mohitnizami said:
NOTE: This tutorial is for rooting Xolo Q2000. These are the instructions to root Xolo Q2000 using Motochopper Tool on your Windows Computer.
Easiest and Safest Method
NO DATA LOSS
Your Warranty will be void after rooting
Credits: Full Credits goes to DAN ROSENBERG
Requirement:
1. Ofcourse Xolo Q2000 Handset.
2. Atleast 50% battery
3. Your Brain
4. Some Patience.
Step 1: Download and extract Xolo Q2000 USB driver on your computer.
Step 2: Enable USB debugging on your handset. To Enable: Setting > Development > USB Debugging (Tick to Enable it)
To show Development Option in Setting menu just go to Setting > About Phone > Build Number (Tap on it 5-8 time to enable developer mode)
Step 3: Connect Xolo Q2000 to ur computer and install usb driver.
Step 4. Download and Extract Motochopper tool on your computer. After Extracting files, Open run.bat file.
A black screen will pop up, now press any key from keyboard to start rooting process.
Once rooting is complete, you will see a success message. Again press any key to continue.
Your phone will Restart automatically.
Now your XOLO Q2000 is successfully rooted.
To verify, Open application menu on your smartphone and see the SuperSU app installed. :good::good::good:
UNROOT: Open SuperSU> Settings > Full Unroot.
Click to expand...
Click to collapse
Hi,
Thanks for your tutorial.
I got my phone rooted. However when i tried to install custom recovery.
Its not working as the cwm recovery image found to be not working which i sourced from another thread. Now i lost my stock recovery as well.
Could you please upload the stock recovery image or working cwm recovery image.
Thanks. l

[ROOT][RECOVERY][ROM] LAVA iris 300 style

Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.

wahh! Now just make a best kitkat rom for 300 plz!! ur gr8

[ROOT][RECOVERY][ROM] Micromax A37b

Root : JB 4.2
Root Micromax A37B
1. Download The Kingroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Full Instructions here
Stock Rom : JB 4.2
Unbrick your Micromax A37B
1. Download Stock Rom from here (by firmwarefiles.com)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (without battery)
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your Micromax A37b
Method 1:
You can do full backup/restore with Custom recovery (Carliv/TWRP).
Method 2:
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see 01Development there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.Done.
Full Instructions with images here (by rajit)
Custom Recovery
(Press Vol up and Power Key to boot in Recovery.)
You can flash it via fastboot.
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
OR
You can flash via SP flashtool.
Ctr recovery for Mmx A37b
Ctr 2.2 here ( by programmer Shekhar.Hardknox)

[ROOT/Recovery] Coolpad Note 5 Nougat and MM any Version

Hello
Here im explaining detail method of rooting Coolpad Note 5 Nougat/Marshmallow.
YOUR WARRANTY IS NOW VOID
IM NOT RESPONSIBLE IF YOU HARD/SOFT BRICK YOUR MOBILE.
Step:1 Enable USB Debugging
*If you have already enabled, then skip this step. Otherwise follow this,,,
- First of all Go to Settings>About Phone
- Then you see "Build Number"
- Click on Build number 7 times (screenshot)
- Now developer options is enable
- Open Settings>Developer option
- Then find USB Debugging, and Enable it
- Done
Step:2 Root and Install Magisk Manager
- Connect Your mobile to PC, and Select "Transfer files" mode
- Now download this Package and Extract on Desktop >>
*transfer recovery folder from zip to your mobile internal storage
- Install Magisk Manager, and openrp.apk from apk folder
- After both installed, open "openrp app". Then restart your phone.
- After restart, disconnect and reconnect usb cable, and choose "Transfer Files" mode
- Now open cmd.bat file from adb folder inside extracted zip.
- Now black window will appear.
- First type "adb shell" and hit enter
- It will show dialogue box on mobile about ADB USB Debugging, click on allow this computer and ok. (screenshot)
- Now you see on computer that "CP3600I:$" printed on that black cmd screen.
- Ok. Close that cmd.bat screen and re open it.
- Type "adb remount" and hit enter
- Type "adb push magisk /system/bin" and hit enter
- You see that some KB/s was transferred.
- Now Type "adb shell" and hit enter
- You see "CP3600I: #" so If you see "#" character then it means you are root.
- Now type "magisk su" and hit enter
- Then you can press "CTRL+C"
- Then type "audioelectric start" and hit enter
- Then type "audioelectric setDM" and hit enter
- Open Magisk Manager app. Since that apk is old version you will see UPDATE on magisk app screen
- Update magisk and reopen it, You see "INSTALL" button, click on it
- You see magisk***.zip to Install, so Click on "Direct Install (recommend)" option.
- After it will download zip, and took 3 minute to make root permanent. (screenshot)
- After reboot, Open Magisk manager app and you see its completely rooted your mobile
Step:3 Install Recovery
- Install "Flashify" app from Playstore
- Open it and Backup your current Kernel and Stock recovery
- Now go to Flash tab and choose "Recovery Image" (screenshot)
- Select "Choose files", and navigate recovery.img file from that recovery folder from zip file (previously extracted in step-2)
*if you are marshmellow user then select--twrp-marshmellow.img
*if you are nougat user then select--twrp-nougat.img
- Flash and reboot
- After reboot it will open twrp.
- Again reboot your phone so you see home screen.
*However this tutorial is simple, many new people dont know or understand how to root. so i wrote step by step.
*If you cant able to root, then you did not follow those steps correctly. So read/follow it carefully.
*Coolpad Note 5 Users/Dev group on Telegram >> https://t.me/joinchat/JBAXXBGIoLRlSoD3Zrscyw (pls Join this)
**Credit:
TonyStark (for root method)
Kuber (for recovery)
Amit

I bricked my phone when I updated the magisk app and install the updated zip . My device was stuck on bootloader. I had to flash stock .

Please tell how to unroot

No VoLTE option
Hello everyone,
I flashed my phone using YGDP with custom ROM 7.0.210.p0.161109.cp 3600i, ota v210, about 3 months back.
Recently, I observed that the VoLTE option is not appearing the Network setting of JIO. Also, I am not able to make or receive calls.
Tried almost everything, checked *#*#4636#*#* for Phone Information and setting the LTE network but that doesn't work.
Can anyone help me out?