Related
Hi.
I don't know much about details about root/room/recovery, but know some about
ODIN, CWM and other ROM to use.
I've been using Humble 5.0 for a while and my phone got unstable recently, so I ODIN the same Humble rom again, but that is how the problem started.
The main problem is, I can't wipe userdata or cache at all.
CWM says it wiped, but I always get Force close, so many that I can't even use the phone normally.
I tried to go back to stock ROM or any other, but all failed.
Stock ROM with stock recovery says, E:Can't mount /dev/block/mmcblk0p1 (Invalid argument). and most of the time, Bootloops.
Humble is the only option I can go into, and actually use the phone, but it has all the apps and data from the past, even though I wipe data/cache thousand times.
I even erased all SD data, formatted in FAT32, and nothing works.
Finalizing my status,
Can't mount...error with Stock ROM.
Bootloop with other ROM.
Constant Force Close with Humble 5.0 (Can't wipe data/cache).
Please help.
So stock, you used ODIN EE4 and PIT file to go back to stock and took the newest update and still have problems?
Thank you for the reply.
Yes. I tried ED1 and EE4, and even with PIT(repartition) and I get "Can't mount..." error.
I went back to Humble 5.0 which has all kind of force close (still showing all app names I had, mysterious), and formatted SD, factory reset, and tried ODIN ED1/PIT, but result is same.
I have a feeling my internal SD partition got screwed.
I am no pro myself.. But I am running GummyCharge Froyo 2.0 which comes with Imoseyon's Kernel and its rock stable even overclocked to 1,200 mhz for me.. You may want to try getting a copy of that as well as flashing with your SIM Card out and Battery in after booting into recovery.. Let me know if this helps at all!
jiehooni said:
Thank you for the reply.
Yes. I tried ED1 and EE4, and even with PIT(repartition) and I get "Can't mount..." error.
I went back to Humble 5.0 which has all kind of force close (still showing all app names I had, mysterious), and formatted SD, factory reset, and tried ODIN ED1/PIT, but result is same.
I have a feeling my internal SD partition got screwed.
Click to expand...
Click to collapse
I had a similar problem but dont remember what I did to fix lol like that helps you. Did you format your sd card on a computer or with your phone? If not try using an adapter and format on computer. Going back to stock has always solved my problems. There is a new cwm that came out. Just throwing stuff out there. Have you tried re downloading images of the stock ee4 and pit? It is loading so shouldnt be a problem , hmm. Maybe someone with more knowledge will pop in.
I tried GummyCharge 2.0.zip from SD but it didn't help.
I tried CWM 5.0, with many ROMs to wipe cache/data, no use.
I formatted my SD on PC, and from phone, same result.
What I don't understand is, even after I flashed Humble 5.0 ROM which I used right before, and only ROM it works now, it shows all apps I had even after many times of Wipe Data/cache/dalvic.
Even funnier, I delete some apps causing Force Close, and I reboot my phone, it always goes back to where I start. Same Home, the app is still there.
It is just weird.
Im getting FC now all of a sudden. It's you fault damn it lol. Said I was gonna reload anyhow. Just didnt want to do it twice in one night. Oh it is past 12pm so I guess it is another day.
It's been now 3 days, and I found this thread hopelessly.
Same problem I think.
http://forum.xda-developers.com/showthread.php?t=1191650&page=2
I hope somebody can help me fix it.
Now I can't even flash Humble, can't even get through recovery(stock or CWM).
I can't do anything now.
I will Odin back to stock and take it to the verizon tomorrow.
Thank you all of you for the help.
Tried a different usb cable, how did you flash the new cwm? So everytime it says pass through ODIN? Are you checking the right selections through ODIN and using PDA? Man just trying to think of everything and thats about it. Get another phone lol. Superuser and busybox?
I tried different USB cable, PC, installed Samsung driver again.
I took the phone to Verizon today, and they can't hard reset it either at that place.
I dropped the phone 3 month ago and it has a little dent, so that they refuse to repair it under warranty. I am sending it to MobileTechVideo tomorrow.
Thank you.
I'm having the same issues. I was on Humble 5.0 and had been using it without a problem for about 2 weeks and yesterday I noticed my phone reboot on it's own. After the reboot it was stuck in the boot loop. I've also tried reflashing Humble 5.0, tried the instructions on the fix your phone thread, tried flashing to stock and also tried the all in one Gingerbread 2.3.6 W/Root/CWR/IMO Kernel 4.0 to see if CWM would help any.
All successfully pass according to Odin, but they all still boot loop and all give error messages in their recovery modes if I try to do anything involving /cache or /data stating that they fail to mount.
Any thoughts would be greatly appreciated.
Okay, I started this thread with the issue of not being able to root. I bit the bullet and wiped it all and ended up being able to root. Now I have a much bigger issue... My phone wont go into storage mode. Not in the OS, not in CWM, not in download mode. It just can't be recognized by a computer. Yes I have the drivers installed, and the phone knows it's plugged in, it will charge and everything, it just wont give me the option to go into storage mode. This will be an issue if I ever need to flash it for any reason since download mode can't be recognized in ODIN. It was working a day ago... Think it's a hardware issue?
JoeVsFox said:
Okay, I started this thread with the issue of not being able to root. I bit the bullet and wiped it all and ended up being able to root. Now I have a much bigger issue... My phone wont go into storage mode. Not in the OS, not in CWM, not in download mode. It just can't be recognized by a computer. Yes I have the drivers installed, and the phone knows it's plugged in, it will charge and everything, it just wont give me the option to go into storage mode. This will be an issue if I ever need to flash it for any reason since download mode can't be recognized in ODIN. It was working a day ago... Think it's a hardware issue?
Click to expand...
Click to collapse
Storage mode and download mode are different to me atleast.
Have you tried settings/usb settings/ask on connection.
When you connect your usb cable from your computer to your phone it should beep and then ask what you want to do. Is your sd card good? Have you checked it maybe on your computer with an adapter?
Or are you talking about getting into ODIN?
Have you usb cable connected to the main usb port. Pull the battery,put it back in, connect the usb cable , hold the volume down button and power key. Worked every time for me. Not sure what else to say from me atleast. Someone else might chime in. Ive done it both with the battery and with out. Try a different usb port.
ODIN Flash Stock
blueis300 said:
So stock, you used ODIN EE4 and PIT file to go back to stock and took the newest update and still have problems?
Click to expand...
Click to collapse
If you have the charge pit file and EE4 you should be able to wipe everything on your phone. If I am correct, this bypasses all permissions and partitions and basically supercedes any roms or data you have. This should work. try another cable on a different usb port or another computer. I have hard brocked my phone numerous times and this was the only workable method. (if you want you can do a little solder job and have phone by fixed with the unbrickable mod here
I already sent my phone to the repair shop.
Btw, it is the normal case you described, but I tried different PCs, drivers, cables, USB slot, nothing works.
Thank you anyway.
blueis300 said:
Storage mode and download mode are different to me atleast.
Have you tried settings/usb settings/ask on connection.
When you connect your usb cable from your computer to your phone it should beep and then ask what you want to do. Is your sd card good? Have you checked it maybe on your computer with an adapter?
Or are you talking about getting into ODIN?
Have you usb cable connected to the main usb port. Pull the battery,put it back in, connect the usb cable , hold the volume down button and power key. Worked every time for me. Not sure what else to say from me atleast. Someone else might chime in. Ive done it both with the battery and with out. Try a different usb port.
Click to expand...
Click to collapse
Tried it with 2 different computers, different cables, different ports. Ask on connection is on. The SD card works fine when I put in in an adapter. The phone just doesn't data connect via usb. ODIN can't find it. Nothing. Pretty sure this is a hardware issue...
My phone just got back from the repair shop and they say they can't fix it. They think NAND got corrupted. Now I am really stuck...Man...
I have a Samsung Infuse that I recently rooted and installed Serendipity on. I then attempted to load CM7, which caused some problems. Now the phone gets stuck on the Samsung logo and doesn't go any further; I can only load into CWM (Red), which can be "updated" to Green, after a hard reset. I've attempted to reflash the ROM from the SD card (even after wiping Dalvik cache, cache partition, and factory reset), but it just gets stuck on the Samsung logo.
My issue is further complicated by the fact that Download mode doesn't want to work - my phone can enter Download mode, but my computer (with Kies installed for the drivers) doesn't recognize the phone being connected. I've occasionally gotten Download mode to work if the battery is removed at just the right moment, but it doesn't last. Due to this, I can't get Odin to work.
Any ideas on what to do next?
kmv_007 said:
I have a Samsung Infuse that I recently rooted and installed Serendipity on. I then attempted to load CM7, which caused some problems. Now the phone gets stuck on the Samsung logo and doesn't go any further; I can only load into CWM (Red), which can be "updated" to Green, after a hard reset. I've attempted to reflash the ROM from the SD card (even after wiping Dalvik cache, cache partition, and factory reset), but it just gets stuck on the Samsung logo.
My issue is further complicated by the fact that Download mode doesn't want to work - my phone can enter Download mode, but my computer (with Kies installed for the drivers) doesn't recognize the phone being connected. I've occasionally gotten Download mode to work if the battery is removed at just the right moment, but it doesn't last. Due to this, I can't get Odin to work.
Any ideas on what to do next?
Click to expand...
Click to collapse
You have a soft brick.
Odin or heimdall back to stock.
There are about fifty threads previously posted on this topic.
Just read thru a few...
Gl
qkster said:
You have a soft brick.
Odin or heimdall back to stock.
There are about fifty threads previously posted on this topic.
Just read thru a few...
Gl
Click to expand...
Click to collapse
Thanks for the attempt, but as I said before Download mode isn't recognized by the computer, and that is an important component for Odin or heimdall to work.
I have occasionally gotten access to the SD card through CWM, so I can place ZIP files directly on the phone. If anyone has any ideas on what to flash from the phone, I'd love to hear it.
Thanks in advance!
kmv_007 said:
Thanks for the attempt, but as I said before Download mode isn't recognized by the computer, and that is an important component for Odin or heimdall to work.
I have occasionally gotten access to the SD card through CWM, so I can place ZIP files directly on the phone. If anyone has any ideas on what to flash from the phone, I'd love to hear it.
Thanks in advance!
Click to expand...
Click to collapse
Try it on another computer. I recommended Odin back to stock first before you start flashing!
Sent from my SGH-I997 using Tapatalk
Thanks, I'll give a different computer a try.
kmv_007 said:
Thanks, I'll give a different computer a try.
Click to expand...
Click to collapse
make sure you are trying to get into DL mode correctly...
pull battery, hold ONLY the volume buttonS - not the power button -;
insert battery, plug in cable.
if that doesnt work, use a different usb cable.
try different port on the computer
try a different computer or winxp or win7
it's kinda finicky at times.
Finally got it working - needed to use a different computer. Used my brother's laptop and it worked first try. Thanks for your guys' help.
Hi,
I rooted my brandnew GT-P3110 with cf, flashed pacman and cwm recovery. I do not blame anybody alse for my issues but myself. I guess I messed up the restoring of NON-system-apps:
After a day of troublefree use the tablet randomly rebooted and came back with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". No booting into recovery possible, no booting into download mode, no regular boot. Just the same message over and over again. Battery is unremovable.
I installed Kies, updated it, it downloaded drivers but under "emergency recovery" my tablet didn't appear. I then followed the "Firmware Upgrade and Initialization" procedure wich downloaded the necessary files but aborted with a korean text shown in the attachment after replugging the tablet. I tried this with 2 different USB-cables on several USB-ports. Kies btw asked me to remove the battery (not possible) after entering device number and serial-number. I turned off by pressing the off button instead and it turned on again.
I uninstalled Kies, rebooted, installed the samsung drivers manually, rebooted. I installed odin 1.85 (and later 1.3) and downloaded my contry's stock firmware (and later a newer version of the same firmware and another country's stock) from sammobile. I tried to flash them first without "repartition" ticked, later with it ticked but without a pit file (i can't find it!). I got four different errors, two are attached, the third was somethign like "cant write (line 1876)" and "cant write (line 1440)".I tried three stock firmwares with two version of odin with two USB cords on everal ports on ONE computer. I remove the tablet every time, exited odin every time, run it as admin, disabled firewall, xp-antispy and antivirus. I'm on Windows 7.
Besides a million other threads I found this one, but I wasn't able to solve my issue with it: http://forum.xda-developers.com/showthread.php?t=1652398
For 48 hours i tried to solve this problem by myself. Now I hope to find out if there's a point in continuing or if I can give up and throw away the piece of samsung.
Cheers,
404
android404 said:
Hi,
I rooted my brandnew GT-P3110
404
Click to expand...
Click to collapse
Try odin 1.61 1.85 sometimes itll jar it loose
vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
Thanks but it didn't work.
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Mine is still bricked. Good luck.
facing same problem in my samsung tab 2 p3100 after root
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
Click to expand...
Click to collapse
Thanks. Well, I understand the theory. I have had trouble finding a PIT file that I am sure is for my device. I did save a PIT file but I think it is corrupt because using it requires me to let the battery die afterwards to get back to download mode. Same for the bootloader. I have a few things I've tried, but not sure I have one that is exactly for the GT-P5113 (in fact, I never did find a JB for the 5113 just the 5110 and it never would load).
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
I can do each thing you mentioned, but my device is not getting detected by my PC. When I insert USB it says USB not recognized and it is not detected by Odin, adb and anything else. I am stuck on Boot Logo for my P3100 and when I go into recovery, it says USB not recognized. Fully messed up. Can you help me out here.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
Click to expand...
Click to collapse
2 years later .... did you ever unbrick this? I'm dealing with a P5113 now that's stuck at the "Firmware upgrade encountered an issue" screen. <sigh>
wd5gnr said:
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
Click to expand...
Click to collapse
No. I finally sent it to one of these ebay guys who will JTAG it since I was too lazy to wire up one of my JTAG probes. They worked on it and said it was simply dead and the only alternative would be to replace the flash chips.
Bought a Nexus 7.
I've got the pit files for P311x and P3100 on my website https://sites.google.com/site/jrc2swebsite/downloads/samsung-galaxy-tab-2-70-p31xx
I got my GNP 12.2 (SM-P900) a few weeks ago and just tried to root it using Odin and download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
However it paused at cache.img and after 10 minutes or so it just failed.
I've tried it a few times, but same thing, and on start up all I get is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried Kies 3 and Kies 2.6 but they both say my device is not supported, even if I try to go into Tools and do it it says the model name is incorrect and doesn't even give me an option to enter the serial number :-\
I looked around for a stock ROM but the closest I could find was the P901 and P905 (But I am the P900)
I don't really know what to do, so any advice would be much appreciated :angel:
Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that
jns20 said:
Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that
Click to expand...
Click to collapse
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?
ChampagneFerret said:
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?
Click to expand...
Click to collapse
IIRC you need to reflash recovery and you should be able to boot up again.
muzzy996 said:
IIRC you need to reflash recovery and you should be able to boot up again.
Click to expand...
Click to collapse
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.
ChampagneFerret said:
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.
Click to expand...
Click to collapse
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:
icem237 said:
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:
Click to expand...
Click to collapse
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
ChampagneFerret said:
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
Did you use Odin 3.0.7 or 3.0.9? 3.0.7 is included with CF and MUST be used even though 3.0.9 is the latest. If odin was already installed on your PC and you used 3.0.9 bad things are going to happen.
ChampagneFerret said:
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.
icem237 said:
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.
Click to expand...
Click to collapse
I tried both as well, and that's exactly what happened to me. During the process, my screen went all screwy and that's when it told me the process had failed.
I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?
Flash Stock Recovery
davschm said:
I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?
Click to expand...
Click to collapse
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1
Russbad said:
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1
Click to expand...
Click to collapse
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?
davschm said:
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?
Click to expand...
Click to collapse
Stock recovery is what your device originally comes with. CWM recovery is a modified version of that and it allows you more functionality.
When I messed up my update and root, my device would not boot up at all. I flashed the stock recovery and that enabled me to successfully root. No data was lost, no factory reset was needed and all my apps and settings were unchanged.
Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.
bioncorp said:
Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.
Click to expand...
Click to collapse
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!
Russbad said:
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!
Click to expand...
Click to collapse
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.
bioncorp said:
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.
Click to expand...
Click to collapse
I finally got mine rooted by simply trying over and over. I re-downloaded the CF flash tool and used 7zip to extract it several times, and used a different usb port at least once. Not that I really thought there was a problem with my extraction or the download or my USB port. But from what i have seen posted, you just have to try it 3 or 4 (maybe even 10) times until you get lucky and it works.
I did at one point try to recover my Note 12.2 with the "recovery.img" instead of flashing it with a full factory re-image (which causes data loss) but that didn't work for me ether. But I later had good luck with using Odin 3.09 to flash TWRP. So at least I now have a good custom recovery and backup tool.
okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:
ChampagneFerret said:
okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:
Click to expand...
Click to collapse
FINALLY! :laugh: I got it to root!
I ended up using a different computer in the end and used Kies 2.6 for the drivers. I tried this a total of maybe 8 or 9 times, and it worked on the second attempt on the second attempt.
For the record, I left "md5" in the file when rooting, and that's when it worked.
Hello. Yesterday i tried to do a full restore in my Galaxy N8000 (factory) and, as an user of the Bliss Pop, something went wrong and now my tablet doesn't even start anymore. He looks like will start, but then the screen seens to turn on and off again, and so it goes on.
I downloaded the firmware from SamMobile, thinking that maybe i should use Odin and reinstall some stock ROM (i don't even know if i'm doing it right), but it seens like i can't plug it to my computer, Odin doesn't recognize (i've downloaded the Samsung Drivers from the Samsung website, but still nothing). How can i bring my GT back to life again? Please, really, if someone could help me would be so nice and i'll be grateful forever, because i use the tablet for studying and can't be without him. So, thanks in advance, and sorry for the bad english.
As opposed to just attempting to turn it on, have you tried booting directly into recovery (I'm going to assume TWRP)? If that works, you could attempt to reflash the last version of Blisspop that you had. I do know that Odin will not recognise your device unless you've booted into Download Mode first.
DarkHybridx said:
As opposed to just attempting to turn it on, have you tried booting directly into recovery (I'm going to assume TWRP)? If that works, you could attempt to reflash the last version of Blisspop that you had. I do know that Odin will not recognise your device unless you've booted into Download Mode first.
Click to expand...
Click to collapse
Yeah, i can't access the recovery... now Odin recognize my Tablet, but i'm getting the message Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again, but Kies doesn't recognize my GT. What do i do? Flash a new firmware via Odin?
Yes. See if reflashing firmware would do you any good. However, NAND write fails are a bit more advanced...