Infuse Soft Brick - HELP! - Samsung Infuse 4G

I have a Samsung Infuse that I recently rooted and installed Serendipity on. I then attempted to load CM7, which caused some problems. Now the phone gets stuck on the Samsung logo and doesn't go any further; I can only load into CWM (Red), which can be "updated" to Green, after a hard reset. I've attempted to reflash the ROM from the SD card (even after wiping Dalvik cache, cache partition, and factory reset), but it just gets stuck on the Samsung logo.
My issue is further complicated by the fact that Download mode doesn't want to work - my phone can enter Download mode, but my computer (with Kies installed for the drivers) doesn't recognize the phone being connected. I've occasionally gotten Download mode to work if the battery is removed at just the right moment, but it doesn't last. Due to this, I can't get Odin to work.
Any ideas on what to do next?

kmv_007 said:
I have a Samsung Infuse that I recently rooted and installed Serendipity on. I then attempted to load CM7, which caused some problems. Now the phone gets stuck on the Samsung logo and doesn't go any further; I can only load into CWM (Red), which can be "updated" to Green, after a hard reset. I've attempted to reflash the ROM from the SD card (even after wiping Dalvik cache, cache partition, and factory reset), but it just gets stuck on the Samsung logo.
My issue is further complicated by the fact that Download mode doesn't want to work - my phone can enter Download mode, but my computer (with Kies installed for the drivers) doesn't recognize the phone being connected. I've occasionally gotten Download mode to work if the battery is removed at just the right moment, but it doesn't last. Due to this, I can't get Odin to work.
Any ideas on what to do next?
Click to expand...
Click to collapse
You have a soft brick.
Odin or heimdall back to stock.
There are about fifty threads previously posted on this topic.
Just read thru a few...
Gl

qkster said:
You have a soft brick.
Odin or heimdall back to stock.
There are about fifty threads previously posted on this topic.
Just read thru a few...
Gl
Click to expand...
Click to collapse
Thanks for the attempt, but as I said before Download mode isn't recognized by the computer, and that is an important component for Odin or heimdall to work.
I have occasionally gotten access to the SD card through CWM, so I can place ZIP files directly on the phone. If anyone has any ideas on what to flash from the phone, I'd love to hear it.
Thanks in advance!

kmv_007 said:
Thanks for the attempt, but as I said before Download mode isn't recognized by the computer, and that is an important component for Odin or heimdall to work.
I have occasionally gotten access to the SD card through CWM, so I can place ZIP files directly on the phone. If anyone has any ideas on what to flash from the phone, I'd love to hear it.
Thanks in advance!
Click to expand...
Click to collapse
Try it on another computer. I recommended Odin back to stock first before you start flashing!
Sent from my SGH-I997 using Tapatalk

Thanks, I'll give a different computer a try.

kmv_007 said:
Thanks, I'll give a different computer a try.
Click to expand...
Click to collapse
make sure you are trying to get into DL mode correctly...
pull battery, hold ONLY the volume buttonS - not the power button -;
insert battery, plug in cable.
if that doesnt work, use a different usb cable.
try different port on the computer
try a different computer or winxp or win7
it's kinda finicky at times.

Finally got it working - needed to use a different computer. Used my brother's laptop and it worked first try. Thanks for your guys' help.

Related

[Q] Can't mount... problem.

Hi.
I don't know much about details about root/room/recovery, but know some about
ODIN, CWM and other ROM to use.
I've been using Humble 5.0 for a while and my phone got unstable recently, so I ODIN the same Humble rom again, but that is how the problem started.
The main problem is, I can't wipe userdata or cache at all.
CWM says it wiped, but I always get Force close, so many that I can't even use the phone normally.
I tried to go back to stock ROM or any other, but all failed.
Stock ROM with stock recovery says, E:Can't mount /dev/block/mmcblk0p1 (Invalid argument). and most of the time, Bootloops.
Humble is the only option I can go into, and actually use the phone, but it has all the apps and data from the past, even though I wipe data/cache thousand times.
I even erased all SD data, formatted in FAT32, and nothing works.
Finalizing my status,
Can't mount...error with Stock ROM.
Bootloop with other ROM.
Constant Force Close with Humble 5.0 (Can't wipe data/cache).
Please help.
So stock, you used ODIN EE4 and PIT file to go back to stock and took the newest update and still have problems?
Thank you for the reply.
Yes. I tried ED1 and EE4, and even with PIT(repartition) and I get "Can't mount..." error.
I went back to Humble 5.0 which has all kind of force close (still showing all app names I had, mysterious), and formatted SD, factory reset, and tried ODIN ED1/PIT, but result is same.
I have a feeling my internal SD partition got screwed.
I am no pro myself.. But I am running GummyCharge Froyo 2.0 which comes with Imoseyon's Kernel and its rock stable even overclocked to 1,200 mhz for me.. You may want to try getting a copy of that as well as flashing with your SIM Card out and Battery in after booting into recovery.. Let me know if this helps at all!
jiehooni said:
Thank you for the reply.
Yes. I tried ED1 and EE4, and even with PIT(repartition) and I get "Can't mount..." error.
I went back to Humble 5.0 which has all kind of force close (still showing all app names I had, mysterious), and formatted SD, factory reset, and tried ODIN ED1/PIT, but result is same.
I have a feeling my internal SD partition got screwed.
Click to expand...
Click to collapse
I had a similar problem but dont remember what I did to fix lol like that helps you. Did you format your sd card on a computer or with your phone? If not try using an adapter and format on computer. Going back to stock has always solved my problems. There is a new cwm that came out. Just throwing stuff out there. Have you tried re downloading images of the stock ee4 and pit? It is loading so shouldnt be a problem , hmm. Maybe someone with more knowledge will pop in.
I tried GummyCharge 2.0.zip from SD but it didn't help.
I tried CWM 5.0, with many ROMs to wipe cache/data, no use.
I formatted my SD on PC, and from phone, same result.
What I don't understand is, even after I flashed Humble 5.0 ROM which I used right before, and only ROM it works now, it shows all apps I had even after many times of Wipe Data/cache/dalvic.
Even funnier, I delete some apps causing Force Close, and I reboot my phone, it always goes back to where I start. Same Home, the app is still there.
It is just weird.
Im getting FC now all of a sudden. It's you fault damn it lol. Said I was gonna reload anyhow. Just didnt want to do it twice in one night. Oh it is past 12pm so I guess it is another day.
It's been now 3 days, and I found this thread hopelessly.
Same problem I think.
http://forum.xda-developers.com/showthread.php?t=1191650&page=2
I hope somebody can help me fix it.
Now I can't even flash Humble, can't even get through recovery(stock or CWM).
I can't do anything now.
I will Odin back to stock and take it to the verizon tomorrow.
Thank you all of you for the help.
Tried a different usb cable, how did you flash the new cwm? So everytime it says pass through ODIN? Are you checking the right selections through ODIN and using PDA? Man just trying to think of everything and thats about it. Get another phone lol. Superuser and busybox?
I tried different USB cable, PC, installed Samsung driver again.
I took the phone to Verizon today, and they can't hard reset it either at that place.
I dropped the phone 3 month ago and it has a little dent, so that they refuse to repair it under warranty. I am sending it to MobileTechVideo tomorrow.
Thank you.
I'm having the same issues. I was on Humble 5.0 and had been using it without a problem for about 2 weeks and yesterday I noticed my phone reboot on it's own. After the reboot it was stuck in the boot loop. I've also tried reflashing Humble 5.0, tried the instructions on the fix your phone thread, tried flashing to stock and also tried the all in one Gingerbread 2.3.6 W/Root/CWR/IMO Kernel 4.0 to see if CWM would help any.
All successfully pass according to Odin, but they all still boot loop and all give error messages in their recovery modes if I try to do anything involving /cache or /data stating that they fail to mount.
Any thoughts would be greatly appreciated.
Okay, I started this thread with the issue of not being able to root. I bit the bullet and wiped it all and ended up being able to root. Now I have a much bigger issue... My phone wont go into storage mode. Not in the OS, not in CWM, not in download mode. It just can't be recognized by a computer. Yes I have the drivers installed, and the phone knows it's plugged in, it will charge and everything, it just wont give me the option to go into storage mode. This will be an issue if I ever need to flash it for any reason since download mode can't be recognized in ODIN. It was working a day ago... Think it's a hardware issue?
JoeVsFox said:
Okay, I started this thread with the issue of not being able to root. I bit the bullet and wiped it all and ended up being able to root. Now I have a much bigger issue... My phone wont go into storage mode. Not in the OS, not in CWM, not in download mode. It just can't be recognized by a computer. Yes I have the drivers installed, and the phone knows it's plugged in, it will charge and everything, it just wont give me the option to go into storage mode. This will be an issue if I ever need to flash it for any reason since download mode can't be recognized in ODIN. It was working a day ago... Think it's a hardware issue?
Click to expand...
Click to collapse
Storage mode and download mode are different to me atleast.
Have you tried settings/usb settings/ask on connection.
When you connect your usb cable from your computer to your phone it should beep and then ask what you want to do. Is your sd card good? Have you checked it maybe on your computer with an adapter?
Or are you talking about getting into ODIN?
Have you usb cable connected to the main usb port. Pull the battery,put it back in, connect the usb cable , hold the volume down button and power key. Worked every time for me. Not sure what else to say from me atleast. Someone else might chime in. Ive done it both with the battery and with out. Try a different usb port.
ODIN Flash Stock
blueis300 said:
So stock, you used ODIN EE4 and PIT file to go back to stock and took the newest update and still have problems?
Click to expand...
Click to collapse
If you have the charge pit file and EE4 you should be able to wipe everything on your phone. If I am correct, this bypasses all permissions and partitions and basically supercedes any roms or data you have. This should work. try another cable on a different usb port or another computer. I have hard brocked my phone numerous times and this was the only workable method. (if you want you can do a little solder job and have phone by fixed with the unbrickable mod here
I already sent my phone to the repair shop.
Btw, it is the normal case you described, but I tried different PCs, drivers, cables, USB slot, nothing works.
Thank you anyway.
blueis300 said:
Storage mode and download mode are different to me atleast.
Have you tried settings/usb settings/ask on connection.
When you connect your usb cable from your computer to your phone it should beep and then ask what you want to do. Is your sd card good? Have you checked it maybe on your computer with an adapter?
Or are you talking about getting into ODIN?
Have you usb cable connected to the main usb port. Pull the battery,put it back in, connect the usb cable , hold the volume down button and power key. Worked every time for me. Not sure what else to say from me atleast. Someone else might chime in. Ive done it both with the battery and with out. Try a different usb port.
Click to expand...
Click to collapse
Tried it with 2 different computers, different cables, different ports. Ask on connection is on. The SD card works fine when I put in in an adapter. The phone just doesn't data connect via usb. ODIN can't find it. Nothing. Pretty sure this is a hardware issue...
My phone just got back from the repair shop and they say they can't fix it. They think NAND got corrupted. Now I am really stuck...Man...

Getting Rainbow screen on every boot and when trying to get to recovery mode

Getting Rainbow screen on every boot and when trying to get to recovery mode
For some reason I cannot get my computer to detect my device thus I can not even get into download mode. when I launch Odin and and not able to access my SD. I am at a lost here since now I cannot flash nor can I odin to get back to stock can anyone help here? I think I have tried everything I can find.
I just recently flashed octane 2.x per the instructions under development
rozzko said:
Getting Rainbow screen on every boot and when trying to get to recovery mode
For some reason I cannot get my computer to detect my device thus I can not even get into download mode. when I launch Odin and and not able to access my SD. I am at a lost here since now I cannot flash nor can I odin to get back to stock can anyone help here? I think I have tried everything I can find.
I just recently flashed octane 2.x per the instructions under development
Click to expand...
Click to collapse
If you came from Froyo, follow this guide: http://forum.xda-developers.com/showthread.php?p=16762954
Hope this helps.
sent from my CommandCenter using xda premium
sounds like the bootloader.
flash a froyo rom, then try to odin. AFTER you have tried installing the drivers linked in the previous post. That guide should work.
Did you get this fixed?
Sent from my SGH-T959V using xda premium
I bought a Jig an can get into download mode but still cant get into recover (because of the rainbow screen) and i cannot get my computer to recognize my my phone either via sd or via odin or i think i could solve this.
thanks in advance
I bought a Jig an can get into download mode but still cant get into recover (because of the rainbow screen) and i cannot get my computer to recognize my my phone either via sd or via odin or i think i could solve this.
thanks in advance
Click to expand...
Click to collapse
Go into the control panel & uninstall the USB drivers & kies mini if installed. Then reinstall Kies Mini & use the menu option to reinstall the drivers. See if that helps.
Sent from my SGH-T959V using XDA App
I re installed drivers several times and used a different machine. I feel like I am stuck and there might now be a solution to this except toss the phone in the ocean!
rozzko said:
I re installed drivers several times and used a different machine. I feel like I am stuck and there might now be a solution to this except toss the phone in the ocean!
Click to expand...
Click to collapse
Could it be the cable you're using? I've seen quite a few posts here about people using cables that were bad and/or too long and it prevented the phone from being recognized via USB. People could charge the phone but not use ODIN or anything.
Do you have a different cable to try?
ive tried two different cables, i could try another one thats a good idea. somehow i think maybe i messed up the mounting, i thought i followed the instructions to a t. UMMU .. i will try a few different cables when i get home tonight... actually just tried at work no dice, my system storage is also only showing 126 MB
rozzko said:
ive tried two different cables, i could try another one thats a good idea. somehow i think maybe i messed up the mounting, i thought i followed the instructions to a t. UMMU .. i will try a few different cables when i get home tonight... actually just tried at work no dice, my system storage is also only showing 126 MB
Click to expand...
Click to collapse
I thought the phone did not boot up. How are you seeing how much storage you have left?
I'm curious to know what state it really is in. There has to be a way to get it going for you.
the phone boots fine during the boot after the initial boot screen where it says galaxy s 4g it goes into rainbow patterns. so every time i try to get into recovery when I am in the recovery menu (or into where the recovery menu should be) i cannot see anything because of the rainbow screen. I was told maybe i have the wrong boot loaders installed.
because i cant see recovery and I cannot get my computer to see my phone I have no idea what to do get my phone back to stock to start over.
This is why I am stuck.
If i could get my computer to see the phone I think i could odin back to stock, using the dongle is half the battle as i can get in recovery
rozzko said:
the phone boots fine during the boot after the initial boot screen where it says galaxy s 4g it goes into rainbow patterns. so every time i try to get into recovery when I am in the recovery menu (or into where the recovery menu should be) i cannot see anything because of the rainbow screen. I was told maybe i have the wrong boot loaders installed.
because i cant see recovery and I cannot get my computer to see my phone I have no idea what to do get my phone back to stock to start over.
This is why I am stuck.
If i could get my computer to see the phone I think i could odin back to stock, using the dongle is half the battle as i can get in recovery
Click to expand...
Click to collapse
Pardon me if I'm not getting it....but yo said it boots fine but then you get the rainbow screen when the Galaxy S 4G logo should appear? The rainbow screen is definitely a boot loader issue. I'm just trying to figure out a way to either get you into a download mode where the phone is recognized or into recovery so you can get it going again.
How are you getting it into recovery mode?
I'm wondering if Heimdall would be your best bet? You could try to download it from here, extract it somewhere, then go into the Drivers folder and double-click zadig.exe. Select Options from the menu bar, select List All Devics then select Samsung Android Composite (something along those lines), then click Install Driver. This is a different driver than the one that comes from Samsung.
After that, maybe try Bhundven's [Heimdall][One-Click][UVKJ6] The KJ6 Heimdall One-Click Collection [12/11/2011]. Select whichever one-click file you want to go for and follow his instructions. They all have the GB bootloaders in them, so you should be set.
Usually both volume buttons power button for a few secs or through rom mgr
rozzko said:
Usually both volume buttons power button for a few secs or through rom mgr
Click to expand...
Click to collapse
From what I've read ROM Manager is a no-no on this model phone. I dunno why, but I've read that on a few threads.
Let me know if you're able to install Heimdall and the open source drivers that come with it. If you can, you can get into download mode, and it sees the phone, then you can try the One Clicks or even just flash the boot loaders from a ROM that contains them.
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
rozzko said:
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
Click to expand...
Click to collapse
Ugh...well let's hope for the best. I would uninstall any drivers and programs like Kies you have installed first, then install the Heimdall drivers. Let me know how it goes.
so i uninstalled drivers executed Heimdall and put phone in download mode with dongle. the computer still did not detect phone, however i got my replacement SGS4 today put it in download mode and it was detected immediately.
I dont know what else I can do do get the phone detected or fix the boot loader to get into recovery
rozzko said:
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
Click to expand...
Click to collapse
Maybe I'm missing something. How are you switching between debugging mode and mass media if you can't boot the phone?
The way I understood the problem, you would get to the SgS logo screen during boot, then the whole screen would be covered by the rainbow effect, which renders the screen unreadable, nd thus the phone unusable. Is that correct, or is the problem different?
the rainbow screen happens right after the SGS Logo then fades out once the lock screen comes on.
it also shows up once I try to get into recovery but from that point I cannot see anything and have to reboot.
Phone works after fully booted
both debugging and mass storage have been tried
You need to flash the "GINGERBREAD" bootloaders. This issue is 100% caused by froyo bootloaders. Once you obtain the GINGERBREAD bootloader, there is a 100% chance that the issue will go away. Flash THISTHIS/download. in heimdall. Get into recovery, then flash a rom of your choice.

[Q] [HELP] Stuck on CWM screen, frozen!

Hey everyone!
So I flashed a ji6 tar through SGS kernel flasher to get 2e recovery. I think it managed to do so successfully because now I have CWM when I boot into recovery. HOWEVER, when recovery pops up it goes to the CWM screen and FREEZES! I cannot select any options including reboot system. I also now cannot startup my phone normally! What can I do? I have ODIN but it won't detect my phone when it's connected (tried this about 20 times). I'm running a mac so I guess there aren't very many options. The only way out of anything int his mess is to pull the battery. SOMEONE PLEASE HELP! My phoen is now useless for all purposes. I tried factory reset, etc. On normal bootup my phone is stuck on the startup screen and never progresses past. Help please!
well odin doesnt run on mac.
search for heimdall. (same thing but for all OS) [PROGRAM] Heimdall - Open-Source Cross-Platform Flashing Suite ...
heimdall / odin use download mode not recovery, you know that right? hard to tell by your message.
Instructions for download mode:
plug USB cable into computer
have phone shut off
hold both volume buttons
plug USB into phone
let go of buttons when you see an android digging "down"
Click to expand...
Click to collapse
or get VMware or another virtual machine and install windows. http://www.utorrent.com http://torrentz.eu/search?f=vmware http://torrentz.eu/search?f=windows+7
THanks for the tips.
I've been using (or trying to) Odin in Download mode but it will not detect my device. Recovery in CWM freezes, 2e recovery leading to the CWM screen is fine but when I hit'reboot now' or startup regularly using the power button, it's stuck on the boot up logo page. But I'm investigating Heimdall hopefully that helps or I am totally at my wit's end! Been working on this for a couple hours using everything I can think of! (And Google and XDA forums of course!)
Gave Heimdall a whirl, it just says failed to confirm end of PIT file transfer. HELP!!!
NewbDroid said:
Gave Heimdall a whirl, it just says failed to confirm end of PIT file transfer. HELP!!!
Click to expand...
Click to collapse
Any chance you have access to a Windows based system? I've never used Heimdall, so I can't help you there.
Are you 100% sure you're in Download mode? Yellow shovel guy. Were you using Odin with VMware Fusion or something similar? Try different USB ports if it's a G5 or something, doesn't apply if a Macbook.
Heimdall is open source and it works on all platforms...
It's BETTER!
studacris said:
Heimdall is open source and it works on all platforms...
It's BETTER!
Click to expand...
Click to collapse
I don't doubt that at all. I flash to stock so seldom now that using Odin once ever 3 or 4 months doesn't bother me.
NewbDroid said:
Gave Heimdall a whirl, it just says failed to confirm end of PIT file transfer. HELP!!!
Click to expand...
Click to collapse
unfortunately i know nothing about heimdall, even though im the one that suggested it. studa! help a man out! i gave you your 900
here is a link to a 1 click heimdall package, which also has a prerooted version i suggest you get that as this a transitory os and rooting is part of the process of getting 2e recovery WITHOUT flashiing a stock kernel that will make your phone unbootable.
if you have connection issues refer to THIS THREAD
once that is completed, refer to THIS THREAD to MANUALLY replace 2recovery.
then to make sure it wasn't a wonky cwm file you had that made it freeze(actually now that i think about it you could use adb to push this to the root of /mnt/sdcard FIRST to see if its the cwm file. adb should work in recovery) grab the attached update.zip
Had a similar situation and had to order the USB jig to get out of it. It is pretty easy to make or if you want an easy (and clean) option, order one. Once you have that, remove the battery, SIM and SD. Reinsert the battery and then insert the USB jig. It will go right into download mode and then from there use Odin to flash it back to stock.

[Q] Root frozen and can't get into download mode

I went to flash my sgs2s and it successfully went into download mode. I started Odin and it froze on xxxxx.img. After waiting about 30 minutes, I shut off the phone and tried to go back to my download mode, only to find that it goes to "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried so many different ways to get it back into download mode and nothing seems to work. I can get to the screen to push the vol+ to get to download mode and it goes back to the error screen.
I have tried to use Kies to restore my device to no avail. I have scoured the web for any information, also to no avail. I have tried a couple of ROMs, one which was a stock ROM, no difference. I cannot boot my phone and am in need of my phone. Thank you for any help you might be able to offer.
Gsii or gsii skyrocket?
Sent from my Liberty using XDA
Samsung Galaxy S2 Skyrocket. Sorry about that.
phantomofdaATL said:
Samsung Galaxy S2 Skyrocket. Sorry about that.
Click to expand...
Click to collapse
Its fine, its still in dl mode. Run it again
if it doesnt work after a few tries, reboot pc, right click and run odin as admin, try a different usb port or cable
phantomofdaATL said:
I went to flash my sgs2s and it successfully went into download mode. I started Odin and it froze on xxxxx.img. After waiting about 30 minutes, I shut off the phone and tried to go back to my download mode, only to find that it goes to "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried so many different ways to get it back into download mode and nothing seems to work. I can get to the screen to push the vol+ to get to download mode and it goes back to the error screen.
I have tried to use Kies to restore my device to no avail. I have scoured the web for any information, also to no avail. I have tried a couple of ROMs, one which was a stock ROM, no difference. I cannot boot my phone and am in need of my phone. Thank you for any help you might be able to offer.
Click to expand...
Click to collapse
What were you flashing? Seems like a bad download. Happened to me once. The error screen is download mode. If you try and connect the phone to a computer I am sure ODIN will be able to se it. Redownload whatever you were flashing and try to flash it again using ODIN.
As a usual warning, do NOT check repartition in ODIN.
As a usual tip, use the USb port that's directly on the motherboard of your PC, and not the one on the front.
Also, run ODIN as administrator.
Sent from my SAMSUNG-SGH-I727 using XDA
Changed the usb port and it WORKED! Thanks everyone!
Good to hear.
I had to ask because a lot of... less-than-intelligent... people tend to flash skyrocket roms on gsii phones or vice versa, thus bricking their devices...

Samsung Infuse Soft Brick and Distorted Clockwork Mod Recovery

I am in desperate need of help .. I am not a noob to flashing roms and rooting, however I have a one-off situation w/ no precedents to my knowledge. I have read these and other forums for days to no avail.
I was flashing Infintium Rom 4.0.4 from MIUI 2.3.6. I followed the steps listed in the post (http://forum.xda-developers.com/showthread.php?t=1661690). After flashing I rebooted and waited however the phone was/is stuck on the Samsung logo and never progressed. I then pulled the battery and attempted to go back to recovery mode to reflash make sure I did flashed correctly. However, upon going back into recovery I was greeted by the below image.
Clockwork Mod is extremely distorted and flat out unusable !! As I read further down it advised to use Heimdall (http://forum.xda-developers.com/showthread.php?t=1331381). I downloaded and attempted to use, however my PC (Which by the way is Windows 7 64-Bit) recognized the phone but the Heimdall software did not. I already had the right drivers for the PC and phone. After a few tries I deleted the files and reapplied them. On the 2nd menu after selecting list devices, on the drop down the option for Samsung USB Composite Device neeever ever appears. I also tried on a different PC that ddnt have the drivers and started brand new. Still, Heimdall ddnt recognize.
I also tried to flash numerous files including but not limited to GTG Ultimate Unbrick via Odin. Again, PC recognized USB connection however program ddnt. At this point, I do not know if it is because the status of Clockwork Mod on my phone, but I know it is not because of the drivers or the USB ports on my PC.
In addition to that, I have just scrapped the idea of flashing or getting in CWM and just wanted to do a hard reset (While phone is off held Vol down and Power, once started released power and contimued to hold Vol down. This should take the phone from the Samsung logo to an alt menu that will give the option to do a factory reset. But again w/ my luck .. that screen neeever appears.
In short I have tried at least 3 different ways and many maaany variations to get the phone back into recovery or into a full boot and had NO success.. Please help and ask as many questions as needed to diagnose and resolve this issue .. Thanx in advance and apologize in advance if posted in the wrong thread.
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
andros11 said:
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
ohsirus said:
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
Click to expand...
Click to collapse
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
http://d-h.st/sKF
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
I will try again .. Downloaded, rebooting then will go thru the process again .. standby
Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
no change .. still shows disconnected
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
rkkaranrk said:
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I just did that to post a pic as an example .. I did go to download mode and not recognizing it
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
drnecropolis said:
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
Click to expand...
Click to collapse
I know I need to get the bootloader and a kernel on it however I cant = ( .. yet .. I have 4 different ports on my PC and have tried them all. i have tried phone on then run programs and programs on 1st then phone on and no new results.
I found this short video and it describes my exact situation .. please watch to futher understand http://www.youtube.com/watch?v=OHLUYckTlug
So u have odin and heimdal both on the same PC and drivers for them if yes then try this.
On the PC/Laptop uninstall all the drivers for samsung or any other phone and follow this.
Go to accessories> system tool> system restore and check the restore point where the drivers for heimdall were installed restore to a previous restore point after restore finishes install the drivers for Infuse and see now Odin recognizes ur phone, It should.
I had the same exact problem, do you have another phone on which you can install the same CWM recovery on? ...Because the clockwork mod recovery still works, it's just that you can't see it. So just flash a new ROM, by going back n forth between phones, clock how many clicks it takes to get to 'choose zip to install' then 'download' on the not messed up phone, then do the same on the screwy one, just keep doing that till u flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Categories

Resources