Database Info

RK2918 Tab Odys-Loox rocks with Bluetooth!

Oma GB 2.3.1 v1.3 for evaluation
- small & smart
- system ext4
- CWM recovery
- homebrew kernel by Astralix & fr3ts0n
- CPU overclocked @1,1 GHz
- chainfire GPU renderer
- latest hosts, su, su-binary
- autoupdate Google Play/ Flashplayer
- MX Video-Player, Music-Player, Volume+
- HC Statusbar, Launcher3
- Bluetooth support
download v1.3
not working: ./.
be aware: it is your own risk!
decompress download
copy attached fix to sd-card
boot tab into flash mode
run RK-Flashtool as admin: EraseIDB, tick Loader, Run
first boot into CWM: install fix from sd-card, reboot
calibrate touch
have fun!
credits to: Cube, Astralix, fr3ts0n
GPL Sources
- Oma -

Compatibility and fixes
Odys Loox Specs:
- 7", 800*600 px
- LZ300MSF Resistive-Touch-Controller
- RTL8188 WLAN Adapter (Realtek)
- MMA8452 Acceleration Sensor (Freescale)
- OV7675 Front Camera (Omnivision)
- ALC5621 Multi-Channel-AudioCodec (Realtek)
- HYM8563 RTC Clock
- 4GB NAND-Flash (Hynix H27UBG8T2ATR)
- 2x 256MB DDR3-SD-Ram (Elixir N2C82G)
- will also run on Pipo DS710, Approx Cheesecake, Newsmy-NP720,
- may also run (pls place specific kernel in rockdev/Image) on other RK2918 devices
- Oma -

blank

Bluetooth now available in ICS
http://forum.xda-developers.com/showpost.php?p=33487663&postcount=75
- Oma -

Very good ROM for those who stuck with 2.6 kernels.
Also I confirm it works fine on InsarPad V1 (which is a clone of Sonore Andropad) using stock kernel.
Yet some flaws I found:
busybox: there are two binaries in /system/bin and /system/xbin. Also busybox applets aren't symlinked. I had to restore them with my script.
Bluetooth doesn't work:
Mon, 21 Jul 2014 16:50:21 +0600: D/BluetoothService( 90): Bluetooth state 10 -> 11
Mon, 21 Jul 2014 16:50:22 +0600: V/BluetoothEventRedirector( 5783): Received android.bluetooth.adapter.action.STATE_CHANGED
Mon, 21 Jul 2014 16:50:22 +0600: I/bluedroid( 90): Starting hciattach daemon
...
Mon, 21 Jul 2014 16:50:32 +0600: E/bluedroid( 90): bt_enable: Timeout waiting for HCI device to come up
Mon, 21 Jul 2014 16:50:32 +0600: D/BluetoothService( 90): Bluetooth state 11 -> 10
Mon, 21 Jul 2014 16:50:32 +0600: V/BluetoothEventRedirector( 5783): Received android.bluetooth.adapter.action.STATE_CHANGED
Click to expand...
Click to collapse
Google+ app's background process crashes regularly. But that's probably Google's problem.
Camera works in photo mode but in video it just rejects to react on commands: hardware button "Back", stop recording etc. Also Hangouts fails to work with video=on.
@Oma7144, thanks a lot for this ROM!

Cool.
It seems the hci implementaion in your stock kernel is different. So no chance.
I could be wrong, but Google+ and Hangouts wasn't invented at the time the build was done.
- Oma -

Also ntpd doesn't work. (that means time is not set automatically from the net)

Question to Oma7144
Oma7144 said:
Oma GB 2.3.1 v1.3 for evaluation
- small & smart
- system ext4
- CWM recovery
- homebrew kernel by Astralix & fr3ts0n
- CPU overclocked @1,1 GHz
- chainfire GPU renderer
- latest hosts, su, su-binary
- autoupdate Google Play/ Flashplayer
- MX Video-Player, Music-Player, Volume+
- HC Statusbar, Launcher3
- Bluetooth support
download v1.3
not working: ./.
be aware: it is your own risk!
decompress download
copy attached fix to sd-card
boot tab into flash mode
run RK-Flashtool as admin: EraseIDB, tick Loader, Run
first boot into CWM: install fix from sd-card, reboot
calibrate touch
have fun!
credits to: Cube, Astralix, fr3ts0n
GPL Sources
- Oma -
Click to expand...
Click to collapse
Hello Oma7144,
First of all sorry to dig up this old topic of yours.
I found this and it seemed the solution to my problems so i have question for you:
- Can this rom be used with the tablet BQ Tesla witch also has the RK2918 chipset? I would like to install a Android 2.3 based rom on this tablet because of performance issues with the latest roms that are out for this model. Can this be done?
Thanks.

Red_Cell said:
Hello Oma7144,
First of all sorry to dig up this old topic of yours.
Click to expand...
Click to collapse
Don't be sorry. This ROM is still very actual for some tablets that don't have 3.0 kernel.
Red_Cell said:
I found this and it seemed the solution to my problems so i have question for you:
- Can this rom be used with the tablet BQ Tesla witch also has the RK2918 chipset? I would like to install a Android 2.3 based rom on this tablet because of performance issues with the latest roms that are out for this model. Can this be done?.
Click to expand...
Click to collapse
Most likely yes, but I believe you can run JB/CM10.1 ROM by Oma which is way better.
Sent from my PIPO S3 using XDA Free mobile app

ildar_prophet said:
Don't be sorry. This ROM is still very actual for some tablets that don't have 3.0 kernel.
Most likely yes, but I believe you can run JB/CM10.1 ROM by Oma which is way better.
Sent from my PIPO S3 using XDA Free mobile app
Click to expand...
Click to collapse
Actually I'm using Oma rom Jelly Bean on my Bq Tesla tablet but I feel it would maybe run better with a android 2.3 rom since this version is lighter and not so memory hungry.
My question to Oma is can this be done since my Bq Tesla came originally with a 3.0 kernel?
Sent from my iPhone using Tapatalk

Red_Cell said:
Actually I'm using Oma rom Jelly Bean on my Bq Tesla tablet but I feel it would maybe run better with a android 2.3 rom since this version is lighter and not so memory hungry.
Click to expand...
Click to collapse
I doubt that. IMHO Android 4+ is faster then 2.3, Google made a great job. Though that only with enough amount of RAM (512 would be great).
Red_Cell said:
My question to Oma is can this be done since my Bq Tesla came originally with a 3.0 kernel?
Click to expand...
Click to collapse
Doubt that again. @Oma7144 ?

Negative, GB will not run on a post GB kernel.
- Om -

RK3066 Tab Genio by Oma rocks !

Odys Genio 7", 1024*600 (16:9) aka PiPo P793 aka PiPo S3
Specs:
- Screen: Samsung LMS700JF04-0
- Touchcontroller: VTL ct36x
- Wifi/BT: RK903 = module, based on BCM40183 Chipset, which main chip is the BCM4330
- Audio: RTL5631
- Sensor: MMA7660 (daemon MMA8452)
- Keypad: Power = 116, Vol+ = 115, Vol- = 114
- Akku capacity: 3000 mAh
- Cams: sp0838 front, sp2518 rear
- HDMI: RK30
- Clock: TPS65910
Technical Documents:
- RK3066 TRM rev2.0
- RK3066 MID
- RK3066 Datasheet v1.0
GPL Sources:
- Odys Genio
- BQ Edison
- EasyPad 971 Dual Core
- Model a09
Homebrew Kernel (sources):
- modules (hub, xpad, cifs, tun, lan, serial) are already running in all builds
- homebrew kernel JK17 is running in CM10.1 v1.3.5, also OC kernel are available
All credits to: Astralix, JochenKauz
Firmware:
- Stock and Root-Tool
- Oma RK30 JB v1.3
- Oma RK30 JB v1.4 Win8 UI
- Oma RK30 JB v1.5 SDK 2.0
- Oma RK30 JB v2.4
- Oma RK30 CM10 v1.2
- Oma RK30 JB 4.2.2 v3.2
- Oma RK30 JB 4.2.2 v3.3
- Oma RK30 JB 4.2.2 SDK2.0 multi window v5.1
- Oma RK30 CM10.1 v1.3.5
- Oma RK30 CM10.1 v1.4 Speed Edition
Hints for Pipo S3 user: http://forum.xda-developers.com/showpost.php?p=42907090&postcount=167
LP build for rk30boards with a 3.0.36+ kernel
- Oma -

Stock Firmware and Root-Tool
- Firmware Dump
- Root Tool
- Oma -

Oma RK30 Jelly Bean v2.4 - 14.01.2013
- System ext4
- CWM 6.0.1.5 recovery
- externe SD mounted as NAND (up to 64 GB)
- Internal Storage 2,5 GB
- Init.d support
- USB-Hub enable
- Gamepad (PS2, XBox, ...)
- Kernelmodules (cifs, tun, lan, serial)
- Ethernet settings
- Asphalt 7 compatibel
- Device = Nexus 7
- latest hosts, su, su-binary, busybox
- MX Video-Player, Play Music & Volume+
- Reboot Menue, Kernel Tuner,
- Dateimanager HD (Root)
- Nova Launcher
Instructions are included in the download pack. Enjoy!
Credits to: Astralix, feriross, JochenKauz, netlars
GPL Sources
- Oma -

Oma RK30 CM10 v1.2 - 18.01.2013
- System ext4
- CWM 6.0.1.5 recovery
- externe SD mounted as NAND (bis zu 64 GB)
- Internal storager 2,5 GB
- Init.d support
- USB-Hub enable
- Gamepad (PS2, XBox, ...)
- Kernelmodule (cifs, tun, lan, serial)
- Device = Nexus 7
- latest hosts, su, su-binary, busybox
- MX Video-Player, Play Music & Volume+
- Google Chrome, Skype, 4.2 keyboard & clock
- Reboot Menue, Kernel Tuner, Pimp my Rom
- Dateimanager HD (Root)
- Nova Launcher
Problems/workarounds:
- HW-Decoding via App BubbleUPNP/Libary
- artefacts in launcher while rotating (disable rotation in settings/display)
Instructions are included in download pack. Enjoy!
Credits to: ChristianTroy, netlars
GPL Sources
- Oma -

for future builds
- Oma -

Oma7144 said:
for future builds
- Oma -
Click to expand...
Click to collapse
any way we could get you to Dev for the imito MX1 android mini pc "also a RK30 device
We are yet to even have a fully functional CWM recovery
any help would be greatly appreciated,
Thanks in advance

You will find some good stuff here: http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=78&t=658
Also I guess above builds will run with your specific kernel.
- Oma -

Ok, this was very fast
First installation on other Tab - bq Maxwell Plus.
- Oma -

My bq MaxWell Plus doesnt recognize my internal sd card

Did you install the format_NAND fix?
- Oma -

Oma7144 said:
Did you install the format_NAND fix?
- Oma -
Click to expand...
Click to collapse
Thank you very much! Now is working The rom is excellent! Thank you!!!!

Kernel Pipo S1. Change Kernel in folder rockdev/Image.
7", 800*480 (16:9) - model fix to set screen to 120 dpi.
- Oma -

Test Builds for:
Pipo M1 & Odys Noon
Flash update.img with RKBatch-Tool and run format_NAND fix in CWM.
As I do not have the hardware at hand I can't test.
Edit: successfully installation on Odys Noon
- Oma -

Hi.Will I be able to install this rom on a Pipo S1? Thank you.

Well, I can run the S1 Firmware on my Genio. So I guess it is possible only by changing the kernel. Give it a try.
- Oma -

So.I follow the instructions that are in the package and I only change the kernel,right?

Yes. Also copy format_NAND fix and model fix to extSD.
First start will be into CWM. Then install both fixes (install zip from sd-card).
Got attached feedback from exxpecial. PCBA = DS733 V3.0 2012_10_18.
- Oma -

The last two pictures are from the inside ...... pipo s1 ..... but I guess you already know.
Greetings and other things

I think I found a problem ..... or I have a problem .... try to explain ..... when you run the fix zip to rename partitions .... renames one .... as external sd .... when in fact it is the sd .... this causes when you install a program to move applications to the SD card and have not physically inserted sd ...... can not move apps to this partition .... not sure if I explained

The solution requires an external SD. Without it will not work.
- Oma -

[rom] CyanogenMod 10.1 for Allwinner A31 (SDK 3.2) devices - 2013-07-15 update

If you appreciate my work and would like to support me with a small donation you can click on
button.
If every happy user of this rom would just donate something I could invest more time in all these Android projects.
Issues and possible workarounds
* Accelerated video playback is supported by MX Player in HW+/HW mode and pretty much every file will play, try both playback method because it depends on the video codec; I noticed that HD videos plays better in HW+ mode while SD (XviD for example) play better in HW mode. For a better audio support (included DTS playback) have a look here.
* HDMI shows a picture but it doesn't fill the TV screen entirely.
* Probably other things...
Features
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* Veno congestion control algorithm
* USB audio
* USB bluetooth (It supports only CSR devices, they can be identified typing "lsusb" from an app like "terminal emulator": the supported device will be present with an entry like "Bus 001 Device 002: ID 0a12:0001" ("0a12:0001" is the supported VIDID). Do not boot with the bluetooth plugged in; plug it once you booted to android.)
Instructions
* You need TWRP to be able to flash this rom. Read the linked thread for instructions.
* Put rom (cm-10.1-$DATE-UNOFFICIAL-spark.zip) and gapps (gapps-jb-$DATE-signed.zip) files inside internal or external sdcard.
* Turn on the tablet in recovery mode as explained in TWRP thread.
* If this is your first install select "Factory reset" from "Wipe" menu.
* Flash rom (cm-10.1-$DATE-UNOFFICIAL-spark.zip), gapps (gapps-jb-$DATE-signed.zip) and, if you're installing this rom on a device that is not the Spark, the required compatibility zip.
* Now select "Reboot".
* Enjoy CyanogenMod 10.1!
Changelog & download links
2013-07-15
* Added USB bluetooth support
* Fixed a typo, try 3G dongles again and report if they're working now
* Updated upstream sources
ROM (md5sum)
Gapps
Compatibility zips
Only devices with a stock SDK 3.2 firmware can be supported.
* Onda V972 (v1) (v3.2 based) 3.2_rc1
* Onda V972 (v2) (v3.2 based) 3.2_rc1
* Onda V973 (v1) (v3.2 based) 3.2_rc1
* Onda V973 (v2) (v3.2 based) 3.2_rc1
* Onda V811 (v3.2 based) 3.2_rc1
* Onda V812 (v1-v4) (v3.2 based) 3.2_rc1
* Onda V812 (v5) (v3.2 based) 3.2_rc1
* Onda V813 (v3.2 based) 3.2_rc1
* Onda V818 mini (v3.2 based) 3.2_rc1
FAQs
* If your devices doesn't have a volume rocker you can install one of these apps to control volume from the notifications: Volume in notification, TrayVolume
* WiFi now can stay enabled with display turned off. Note that if WiFi is enabled the tablet won't enter deep sleep so if you're more interestead in battery life instead of an always on WiFi change policy (on "Advanced" WiFi settings) from "Always" to "Never" and select your preferred WiFi timeout.
* Internal memory is mounted at /storage/sdcard0, external sdcard is mounted at /storage/sdcard1. If you wanna swap them (and make primary your real microsd) just edit "persist.sys.vold.switchexternal=0" to "persist.sys.vold.switchexternal=1" in "/system/build.prop" file
Screenshots
Sources
https://github.com/christiantroy/allwinner_a31

Old stuff
2013-07-12
* Spark: integrated fix for the zoom issue
* Some changes under the hood
* Added ExFat support
* Updated upstream sources
ROM (md5sum)
2013-07-03
* WARNING: before flashing this build you HAVE to flash stock SDK 3.2 using Phoenix Suit and answering "yes" to the format prompt, after that install the new TWRP for SDK 3.2 and proceed. You can do a nandroid backup before flashing with phoenix suit and copy the whole "TWRP" folder from the internal memory to your microsd (or to your PC) if you don't wanna reinstall everything again. In this case restore the backup and after that flash the new zip. If you get any weird trouble do a full wipe.
* Updated proprietary blobs to SDK 3.2
* Updated upstream sources
ROM (md5sum)
2013-06-29
* Fixed 3 dot button not working properly
* Fixed vibrator
* Spark: remapped "back" HW button to "home" so now it can be customized from CM's settings
* Updated upstream sources
ROM (md5sum)
2013-06-22
* Improved video playback compatibility: now MX Player in HW+ mode will play every movie that don't have DTS audio tracks.
* Enabled WebGL
* Some minor changes under the hood
* Updated upstream sources
ROM (md5sum)
2013-06-16
* Fixed Spark's touchscreen issues (thanks MadNBG)
* Potential improvement in stock browser's smoothness
* Updated upstream sources
ROM (md5sum)
2013-06-10
* First build but ready for being a daily driver.
ROM 2013-06-10 (md5sum)

Hi!
U are awesome!
I have a Allview alldro 3 speed quad (http://allview.ro/shop/tablete-si-tv-box/alldro-3-speed-quad.html) after the last official update with 4.2.2, it is very similar with Onda V972, someones who have this tablet tried to install the official Onda firmware with success, someones say the camera work, someones say not working, but the wifi not work for all..
(I fount in this post (http://forum.xda-developers.com/showpost.php?p=42058719&postcount=1108) hi has maybe samsung swl-n20 wireless... )
It is possible to port the CyanogenMod from Onda V972 to this tablet, with wifi driver modification to work with him? Can u help me? (if I can help U, i help with pleasure, i'm programmer, with knowledge in Android)
I have the official firmware file, i downloaded it because the tablet come from the factory with 4.1 It is a very successfull and best selled model, with good price, but with a very lazy lagging firmware.. i don't feel it quad core, my samsung galaxy s i9000 with cyanogenmod is more fast sometimes, without lags...
My tablet is with stock, and not rooted, and I have only the default loader, because i dont find a rooting, or a CWM install tutorial...
Thank U!
update:
Allview released a new 3.2.1.4 firmware (i think it is a clone of Onda 3.2.1 firmware) this is a very good, fast, lagfree update More fast than previous 3.0 version.
I successfully rooted with Root_Onda_4.2.2_V3.2_LZ.zip and i think, with the CWM or TWRP for Onda will works fine. (i think this is the clone for 972 V1)
Only the compatibility with Cyanogenmod port for Onda is the big question....
I found why this tablet has different wireless module, because the 972 had no bluetooth, and the Allview has working Bluetooth....

RobiGo said:
Hi!
U are awesome!
I have a Allview alldro 3 speed quad (http://allview.ro/shop/tablete-si-tv-box/alldro-3-speed-quad.html) after the last official update with 4.2.2, it is very similar with Onda V972, someones who have this tablet tried to install the official Onda firmware with success, someones say the camera work, someones say not working, but the wifi not work for all..
(I fount in this post (http://forum.xda-developers.com/showpost.php?p=42058719&postcount=1108) hi has maybe samsung swl-n20 wireless... )
It is possible to port the CyanogenMod from Onda V972 to this tablet, with wifi driver modification to work with him? Can u help me? (if I can help U, i help with pleasure, i'm programmer, with knowledge in Android)
I have the official firmware file, i downloaded it because the tablet come from the factory with 4.1 It is a very successfull and best selled model, with good price, but with a very lazy lagging firmware.. i don't feel it quad core, my samsung galaxy s i9000 with cyanogenmod is more fast sometimes, without lags...
My tablet is with stock, and not rooted, and I have only the default loader, because i dont find a rooting, or a CWM install tutorial...
Thank U!
update:
Allview released a new 3.2.1.4 firmware (i think it is a clone of Onda 3.2.1 firmware) this is a very good, fast, lagfree update More fast than previous 3.0 version.
I successfully rooted with Root_Onda_4.2.2_V3.2_LZ.zip and i think, with the CWM or TWRP for Onda will works fine. (i think this is the clone for 972 V1)
Only the compatibility with Cyanogenmod port for Onda is the big question....
I found why this tablet has different wireless module, because the 972 had no bluetooth, and the Allview has working Bluetooth....
Click to expand...
Click to collapse
Hi mate was wondering if this is compatible with a nova 10.1 v2 the manufacturers rom is absolute mince and i love CM roms. I know its not listed in the compat zips. The only place i can find any kind of rom is Dorkf*les and that looks a bit of a con for a website.

desmondo1 said:
Hi mate was wondering if this is compatible with a nova 10.1 v2 the manufacturers rom is absolute mince and i love CM roms. I know its not listed in the compat zips. The only place i can find any kind of rom is Dorkf*les and that looks a bit of a con for a website.
Click to expand...
Click to collapse
We can test it.. can u give some links for me?

Nova 10.1 v2
RobiGo said:
We can test it.. can u give some links for me?
Click to expand...
Click to collapse
Hi mate here is a link to the firmware h**p://d-h.st/wXo[/url]
It a nova 10.1 a31 and its version 2 not version 1. Pretty scant any info online for it, any help getting something for this other than stock rom would be mightily appreciated.

Hey folks, does anyone try and compared this ROM with the one that comes with the tablet? Does it make any improvements in terms of performance? Since the original one is very very slow.
Sent from my GT-N7100 using XDA Premium 4 mobile app
---------- Post added at 12:28 AM ---------- Previous post was at 12:27 AM ----------
And how's the battery reading?
Sent from my GT-N7100 using XDA Premium 4 mobile app

Ciao Christian troy
I'm surfing the internet in search of a good ROM for my A31 tablet: Hamlet Zelig Pad 410 more info here:http://www.hamletcom.com/products/xzpad410.aspx
It's running Android 4.1.1 right now
I think the work you've made for this SOC is amazing and I really want to try it out but I don't know what stock SDK 3.2 means and how to check it on my tablet...
thanks

desmondo1 said:
Hi mate here is a link to the firmware h**p://d-h.st/wXo[/url]
It a nova 10.1 a31 and its version 2 not version 1. Pretty scant any info online for it, any help getting something for this other than stock rom would be mightily appreciated.
Click to expand...
Click to collapse
Hi i take its not compatible?

Does wifi adhoc work?

Google voice control force close. Please fix. Thanks.

Maybe is the SDK problem but the camera is kind of weird.

Hi Christian or anyone could help with this momo20 compatibility.zip that you have attached in pg 1 of this section?
I just realized that actually this zip works except that it is unsigned.
I 'll need anyone who has signed it & put it in a link for download...
I tried signing it with the software but it keeps giving me issue on my windows...
Appreciate someone who could signed it or post the signed momo20 compatibility.zip...
Ployer MOMO20 (v2.0 based) 2.0_rc0 which can be found here
https://mega.co.nz/#...NICQ8xfN3QoeYxU
Appreciate with thanks!

is there a twrp version for agptek tp714aq so i can install this lovely rom

Christian Troy said:
If you appreciate my work and would like to support me with a small donation you can click on
button.
If every happy user of this rom would just donate something I could invest more time in all these Android projects.
Click to expand...
Click to collapse
Hello Christian! Is this your github account? I implemented your ubifs solution for mtk phones, and I want to add your xda account in credits instead of github, but I didn't found a link between those two. I don't have a phone with ubifs partitions, but there are many mtk models, and maybe some users will want to donate to you. To be honest I don't have great expectations, because I receive something like 1 euro on a month, and I made first touch recovery for MTK phones, which is used by a lot of people, but I understand that these people who buy MTK phones don't have much money, so I'm OK with it. Still, if you are the same person, tell me and I will add this user link for mtk ubifs users.
Best regards!
Later edit: Ok, sorry for this, I found your link to github under screenshots, and it is clear that you are the same person from github account I mentioned. So, thank you for your great work.

Hello,
I wanted to ask if it would be possible to port / use it on the melee a1000g tv box?

CM11
Any hope for CM11 update?
Onda tablets with A31 chipset has got the 4.4 update....
http://pan.baidu.com/share/home?uk=389436537#category/type=6

Hi,
Could you please post or send me the 3.2.1.4 firmware for Allview alldro 3 speed quad?
I looked everywhere on the internet for it.
Thank you very much!

Looks like I have this ROM on recently bought Archos 97 Platinum HD.
edit. sorry it is for CM 10.2
- important issue - battery sometimes gets to 0% and tablet turns off. Reboot needed then.
I have some issues with Google Play app, some timeouts, stucks.
I have unistalled updates, deleted cache/data Google Play, and GP services, and then readed account in case of RH1 server connection error.
And there were also some shortcomings in smoothness of the menu which I knew before from Cortex A9 Quad Core device.
Then just to finish work with costumizing whole tablet, after installing 20+ aps, I went to recovery (hold two buttons when device is off) and then adv wipe->clean dalvik and clean cache. Then it will optimize all aps again. I think it helps in such a situations.
System in overall works rather good, maybe not so responsively as with my previous experience with Cortex A9, slower, but allright. Just I see that how apps was launching faster before, it's worse CPU, but still not so bad. But as I mentioned, I liked that responsively/instant lanuching.
Then I wen to safe mode by long hold reboot. After getting back to normal mode, there is a smoothness of 2D UI again. It is probably connected with these steps described in TPWRC. Now tablet runs fine.
Antutu score is 15169, when stock rom was sth like 11k, but I'm not sure.
Camera, wifi works.
Stock browser doesn't work. Others works fine.
Now I'll trying to install CM11 from Christian Troy's (author) signature (below his posts) - for Allwinner A31.
http://www.slatedroid.com/topic/978...inner-a31-by-christiantroy-update-2014-04-19/
Or maybe not, cos HDMI dooesn't work there, and this one neither:
http://www.slatedroid.com/topic/102...inner-a31-by-christiantroy-update-2014-04-19/
I'm curious whether Onda 972 4.4.2 ROM ( I heard it's V1 ROM ables to run without camera issues, V1 corresponds with this Archos specification) will run better than this CM10, and maybe without issues from his CM11.
edit. Looks like not:
http://www.arctablet.com/blog/forum/?search=1&new=1&forum=onda-v972&value=hdmi&type=1&include=1
but for sound issues are some solutions
not for 1080p issues.
Altough I found this:
http://www.arctablet.com/blog/forum...tom-firmware-v3-2-1-2013-07-26/page-2/#p29985
but i don't know with exactly which problem with HDMI it corresponds to.
Maybe for absolutely no signal of adapter, not FHD support. i don't know
or this one somebody gave http://www.arctablet.com/blog/forum/onda-v812/hdmi-cable-issues-v813/
onda v972 v1 for Archos 97 Platinum HD Android Kitkat 4.4.2 ROM s
V1 it's the same device, we can flash every rom
http://www.arctablet.com/blog/forum...-bean-root-custom-firmware-v3-3-1-2013-11-22/
I prefer this 4.4.2 - HDMI may work properly, newer SDK based.
http://www.arctablet.com/blog/forum...oted-final-release-28-12-2013/page-7/#p37333]
http://www.arctablet.com/blog/forum...oted-final-release-28-12-2013/page-12/#p41991
http://www.arctablet.com/blog/forum/?search=1&new=1&forum=onda-v972&value=platinum&type=1&include=1
Remember, no mandatory format needed, or checking any options in Phoenix needed.
I didn't do anything with that 10.2 before just flashing in Phoenix. Though I had this custom recovery etc.
Turn off Wifi optimization in options to avoid lags of connection during downloading e.g. in Store.
Anyway, thank you very much for a nice work, Christian Troy!

What tablet have I got?
Hello everyone,
I wanted to install cyanogenmod. I figured out that I don't know which company it is and the model number is not known by google.
I hope someone can help me. Which ROM do I need?
Here are all informations from my tablet:
Model Number: T9701H_2M
Android Version: 4.1.1
Baseband Version: 1.31_20130204
Kernel Version: 3.3.0 [email protected]) ) #8 SMP PREEMPT Mon Feb 4 17:34:05 CST 2013
Build Number: T9701V1-D1-H2-H02.20130204

[ROM] [KERNEL] [KITKAT 4.4.2 - KOT49I ] ZTE V970 / V970M [MT6577]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Open Sourcing Mediatek - ZTE v970 ; SoC MT6577
MediaTek Development
Being owner of an Mediatek device, means (most of the times) not having the sourcecode published by the Official vendor.
ZTE never published their ICS / JB sources (they only gave us incompleted, and unbuildable sources).
--> Well ... This is XDA after all .....
WELCOME to KitKat​
Hello Guys !
In this thread you will find my Rom and Kernel for the ZTE v970 / v970m / Smart a18 (Portuguese Single-SIM version)
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
Its now Ported to our Device
Starting from v1.2 , most things are now compiled from modified customizable source-code.
Many fixs where required for making work on our Combo-Chip [MT6620 - Responsible for the Radio / GPS / WiFi / etc]
Includes: Brand New Custom KitKat Kernel 3.4.67
Changelogs :
Changelog v Stable 1.2 (February 15 2015)
This is an huge Update, several things on the rom are now compiled from source...
New Kernel
Updated Camera configs / Lens / Hall to be "in-line" with the new rom camera libs.
Rom
Fix : Camera Hall / image / Lens / Sensors (camera now with 8MPX; interpolated )
Fix : Camcorder
Fix : Improved rom, with several things now being compiled from source for our ZTE (no more dirty hacks)
Fix: Some SE Linux Permissions on AROMA installer
General Rom Clean
APKs zipaligned
NOTE: In order to have the proper camera preview, be sure to "tick" on camera settings the "ZSD" Option
NOTE 2: Due to the major changes on the rom itself, it is strongly recommended, that you don't dirty flash.
--> Be sure to backup your things, and make all wipes, then install this build.
Changelog v Stable 1.1 R2(January 27 2015)
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband **** Europe/USA 2 (Old ICS Modem) **** Venezuela (MoviStar) Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.1 (January 25 2015)
--Removed from downloads due to issues--
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (Europe/USA/ JB Baseband and Venezuela (MoviStar) ICS Baseband+APN's)
Root Selection (Choose to apply Root, or stay un-rooted)
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
ADD: Multi-User Support (Settings> Users); Check F.A.Q for more Info
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
FIX: Headset Driver (Music/ on-Call Volume Buttons)
FIX: Network Data Meter (Mobile Data and Wifi)
FIX: Green LED when Charging > 90% (merged lingfude's patch)
-WIP- FIX: Camera (Improved Camera colours with the new re-compiled camera .blobs, still - WIP - ); also (merged qus1's camera patch)
Changelog v Stable 1.0 (December 18 2014)
FIX: Bluetooth (thanks qus)
FIX: SIM Management (now working, and available on Settings)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
Changelog v Beta 2 (December 11 2014)
AROMA Installer
New Kernel
FIX: Calls under 3G Network (merged patch)
FIX: Camera AF (Auto-Focus)
FIX: "Automatic Time Zone" FC (com.android.phone) error.
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
Changelog v Beta 1 (November 29 2014)
First Beta Release
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- GPS
- Wifi and Wifi Theter
- Bluetooth
- Sensors
- LED's
- Camera / Camcorder
- Pretty much everything is working just fine ...
Needs Improvements:
- You Tell me
GPL Compliance:
​
Kernel 3.4.67 KK
https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
The MT6620 Combo-Chip Patchs can of course be used by enyone else trying to work on another device with the same SoC and Combo-Chip,
--> Just show some Humanity and give credits for the work i made ...
I Don't support KANGS!
So please Show some respect, when using my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Credits:
superdragonpt
qus1 , for the initial Help / RAW Original Motorola Rom / Being an nice guy
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
lingfude , for the original GT818B Driver work, on the old JB Kernel --> Driver backported to this KK build / Auto-time zone fix
Christopher83, for Linaro Toolchains and Dynamic management of dirty page writebacks
amarullz, for the awesome Aroma Installer
Chainfire, for the SuperSU
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT KOT49I ] ZTE V970 / V970M [MT6577], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2014-12-18
Beta Release Date: 2014-11-29
Created 2014-11-29
Last Updated 2015-03-21

How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery ( In The Downloads Section)
--> I Recommend TWRP
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however you'll have only 500MB of userdata)
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data)
- Flash the ROM
Since Rom Build Stable 1.1: You have an customizable AROMA Installer:
Choose Single/ Dual SIM
Choose BaseBands Modems
Choose to Root/ Stay un-rooted
Downloads:
Downloads are on XDA DevDB
or
On my Dev-Host
KitKat_ZTE_v970_Stable_1.2.zip - 297.48 MB
On my AndroidFileHost
https://www.androidfilehost.com/?fid=95916177934534755
Have Funn

Kernel Goodies / INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
Sakuractive (Add on Stable 1.1)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
sio (Add on Stable 1.1)
row (Add on Stable 1.1)
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Minimum Readahead 32 Kb / Maximum Readahead 1024Kb
Dynamic management of dirty page writebacks
You can check all the Custom Changes on my GitHub Repo

F.A.Q
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
OR --> Settings > MTK Eng. Mode ( added on Stable 1.0)
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard (~2GB) can´t be used as is not visible due to the new KitKat fstab (partition table)
Q: I have the Extended Userdata Partition Layout, do i need to flash any disabled Internal SDCard?
A: NO, There's nothing you need to do or flash
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:

Recovery
Is the recovery touch? My power button doesn't work. Thanks in advance

YEAYY!! Finally!! 4.4 for zte v970!!
THANKS BRO!! all the best
Downloading atm... will reply with my feedback
1st thing, Recovery when you put to reboot he go to the main menu of the recovery ALL THE TIME...
2nd i made all the steps and went well but in this ROM i cant get the expandable storage, with the previous roms i always got the expandable storage but with this one dont :\
any help on that?
3rd i made the expandable thing to my mobile, and i found 1 issue! when you made a call you CANT HEAR ANYTHING but the call IS MADE STILL i made a backup before doing the file for expand, i restored and now is fine the sound...
3rd a) i found out that if you put network to 2G the sound can be heard on the speaker when you made a call

StuffiLike said:
Is the recovery touch? My power button doesn't work. Thanks in advance
Click to expand...
Click to collapse
Yes, it is the recovery Touch.
I'm testing this rom, at the moment is going very good and smooth! Will edit later if i find any bugs.
Great work and thanks!

Thank you, good job.
If the file is copied platform.xml to etc/permissions/platform.xml you will be able to install applications to the SD card.
View attachment platform.7z

Hi
I'll be uploading an new recovery ( Twrp ) tomorrow, since cwm can be an buggy sometimes on KK. ( reboot doesn't work sometimes on recovery)
Edit: I can confirm that on calls, on 3G you cant hear the other person (Edit the OP with this info)
On 2G calls works just fine
Regards, have funn

It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!

Juanjose1 said:
It's very laggy in my ZTE.
Am I the only one?
EDIT: Not laggy now, all is correct. Thank you superdragon!
Click to expand...
Click to collapse
No problem haha
It's actually as smoother as JB4.1 or even slightly better.
--> KitKat uses less RAM (any 512MB RAM Phone can run it just fine), you'll see that KK gives you more free Ram, than any JB/ICS Rom.
Regards
EDIT: F.A.Q. and Kernel Features added on OP and following posts...
EDIT 2: New TWRP Recovery added (Its better than CWM ...)

Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!

yournametv said:
Yes, KK's very stable on my devive(512mb ram). Compared to JB 4.1/4.2, it give more free ram. Don't lags, don't crashes. Amazing!!
Many thanks to superdragonpt you are great!!
Click to expand...
Click to collapse
Hi Yournametv
Yes KitKat runs very good on 512MB, i know, becouse i have another thread, Rom KitKat for micromax a110, and that phone only haves 512MB. and runs smooth
This is still "Beta" , becouse its the first release, but im my opinion, the rom, runs great.
I've been testing this rom for some days, and no big issues.
Please, feel free to share you feedback about the rom, im very Curious to know how's it runs on 512MB.
If you play any heavy game (RAM consuming) please share your feedback here.
Also try to play heavy games, that didn't worked on ICS/JB, KK is more light ...
EDIT: One of the bugs, seems to be fixed: Calls on 3G, i'll post later an patch for you all
Regards

thanks for bringing kitkat to this device
this rom is awesome for 512 ram device, after install full apps it left more 200mb free of ram, that was impossible in JB ,
I could moothly surfing heavy website in chrome, switch moothly to other mutitasking apps, I've never ever done it in lewa or JB. this rom make me love my phone more,
could you make a option to choose which sim to be used in 3nd message/dialer apps please? thanks in advance :victory:

BIg Games
Works fine with ''big games'' :good: . Tested:
- Boom Beach
- Candy Crush Soda Saga
- Clash of Clans
Thank you Superdragon!
EDIT: I'm in ZTE Grand XM (1GB RAM), 512 MB to play xD

calls under 3G Network
Ok , i heavly tested the new patch yesterday, and its now fixed.
Just bare with me, i'll upload the patch, as soon as i find some free time.
Im the time being, you can switch to 2G to make calls.
Regards

No sound during calls
Hi all,
I've just installed this ROM and (as for your previous ROM'S for v970) I want to congratulate (and thank) you on your work, the ROM's are pretty stable and smooth.
However, in this ROM I'm faced with an annoying problem in which when I make/receive calls the other person can hear me but I can't hear anything. I already tested the recording app so it is not certainly an hardware problem. I installed the ROM with TWRP and on the second boot installed superSU as instructed. I got no error messages whatsoever and all the other features seems to work as announced.
I have the v970 version with a single SIM (tmn version). Does anyone has/solved this problem?
Sorry, did not read all the posts previously, forcing the 2G solved it. My bad. Keep up the good work.
Thanks,
Best regards,
André Farinha

Patch 3G calls
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards

superdragonpt said:
Hi
You can now, download the patch for 3G calls
Check download section.
In recovery:
wipe cache and Dalvik
Flash the patch
enjoy
Regards
Click to expand...
Click to collapse
Tested patch to 3G, Works fine!
Thank you superdragon to port KitKat for this device; it was forgotten..

I want to congratulate you for great job!.
Droidvpn and troidvpn not working by problem "Tun Socket"
No problem for the moments, ty!

[ROM] [KERNEL] [KITKAT 4.4.2 - KOT49I ] MMX a110 [MT6577]

​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
WELCOME to KitKat​
The builds are made by qus1 and superdragonpt, take into consideration neither one of us own this device.
GPL kernel(s) on both different branch's can be checked on our github pages
See more on "GPL Compliance" down.
Hello Guys !
In this thread you will find my Rom and Kernel for the Micromax a110 / MyPhone/ Wiko CINK KING/ QMobile a10
Please be sure to read (and re-read) this carefully, to avoid unnecessary questions.
Rom and Kernel INFO:
ROM: KitKat 4.4.2 [ KOT49I ]
Custom Kernel : 3.4.67 [MTK KitKat Kernel]
About the Rom:
Rom based on the Official Release by Motorola XT919 / XT920
( since February 2015) part of the ROM is made from our customized custom source code .)
Includes: Brand New Custom KitKat Kernel 3.4.67.
Changelogs :
Changelog v Stable 1.1 (Feb 14 2015)
User Customizable AROMA Installer:
Single/Dual SIM Selection
Baseband Selection (India / Pakistan / Europe Basebands)
Root Selection (Choose to apply Root, or stay un-rooted)
New Kernel:
Now compiled with the latest Linaro Toolchain 4.9.3
New compilation Flags and MOD Flags: Neon; Cortex a9; arm v7; Linaro's 4.7+ / 4.9.x Flags; fgcse-las; etc
New Modified ALSPS (Prox-Sensors) Drivers, in order to AUTO-Detect the sensor in-use on your Hardware Revision
Camera: Now using the proper camera sensor(8825), no more hacks using the (8835) stock Moto's Camera...
Camera: Now using proper Camera HALL/ and kernel camera's configs
Camera: New ov8825 LENS (using the native one, should increased the AF / reduced camera noise)
OTG: Enable Initial OTG Configs
ADD: CPU Governors: Sakuractive (Optimized HotPlug Governor)
ADD: I/O Schedulers: ROW and SIO
Minimum Readahead increased to 32Kb (16 > 32)
Maximum Readahead increased to 1024Kb (128 > 1024)
Completely Fair Scheduler (CFS): Responsiveness Tweeks
Dynamic management of dirty page writebacks (Fully controlled via Settings > Performance Control )
Increase Swappiness to 70 (60 > 70)
Disable Gentle Fair Sleepers (Better UI responsiveness)
ROM:
Add proper OTG permissions
Add new Camera . libs compiled from source (these are not the same as the ones compiled by qus)
ADD other misc libs compiled by source
FIX: Green LED when Charging > 90% (merged lingfude's patch)
REMOVED: Motorola's FLEX Info (merged lingfude's patch)
The Default AROMA install is for: India Baseband / Kernel JB Camera HW Revision / Dual-SIM
ICS CAMERA HW Users: Flash the Alternative Kernel
KitKat_MMX_a110_Stable_1.1.zip - 313.83 MB
Kernel_mmx_a110_Stable_1.1_ICS.zip - 4.00 MB
ChangeLog Beta4 ( qus1 build) Feb. 10 2015
New kernel
Fix camera Auto-Focus / Fix camera with new compiled .libs from source ( by qus1)
Fix sim-managment ( merged superdragonpt patch)
Fix green led when charging >90% ( merged lingfude patch)
Includes all kernel patch's from superdragonpt's github branch-master until Feb 09 2015 ( check superdragonpt github commit history)
full re-build project
Download:
beta4-2
for beta4, old version. / Kernel patch's for others hardware revisions
patch-beta4 for alsps 36283, touch 5316
patch-beta4 for alsps 3607, touch ft5316_5p
beta4-2 default kernel: for alsps 3607, touch ft5316_5p.
If you have another hardware, just install the proper kernel patch for beta4
Changelog v Stable 1.0 (December 26 2014)
New Kernel
FIX: GPIO/Headset/Volume Buttons, Kernel Drivers
FIX: ALSPS (Prox. Sensor) - Auto-Detection of diff ALSPS, This will also avoid the compilation of an 3rd HW Kernel Revision
FIX: SIM Management (now working, and available on Settings)
FIX: GPS (Improved, auto-detection of the right Combo-Chip)
Added: MTK Eng. Mode on Settings
Added: CPU Performance Control on Settings
Added: AOSP Browser (Google replaced AOSP Browser with Chrome since KK Release)
General Rom Clean
Changelog v Beta 2 (December 14 2014)
AROMA Installer
New Kernel
FIX: Network Modem/Baseband (merged patch)
FIX: ON Screen Buttons
FIX: Device Default USB Name (Device name-Mass Storage)
MOD: Modified KK Permissions to allow apps/data to read/write from External SD Card (Google Removed External SD Card acess on KK)
Cleaned: Unused Telephony .blobs
Added: Default KK Music app (was broken, so i didn't added on Beta1)
Added: modified HOSTs (no more adds from apps spaming you...)
Added: CPU Governor : SmartAss V2 (modified for Dual-core ARM)
Added: CPU Governor : PegasusQ (modified for DUAL-Core ARM)
General Clean on the rom...
Changelog v Beta 1 (November 18 2014)
First Beta Release by qus1
Current Rom and Kernel Status:
Working:
- Telephony (Calls / etc) (2G and 3G)
- Data Connection 2G / 3G
- ART / Dalvik
- FM Radio
- Bluetooth
- GPS
- Wifi and Wifi Theter
- Sensors
- LED's
- Pretty much everything is working just fine ...
Not Working:
- You tell me ...
GPL Compliance:
​
Kernel 3.4.67 KK
superdragonpt Github Repo - Branch Master
qus1 Github Repo- Branch Master
I do respect the GPL, but using someone else's work without proper credits is just LACK OF RESPECT.
The inclusion of this kernel in other [future] ROMS is NOT allowed.
--> Instead add a link to this thread as a recommendation on your thread.
I Don't support KANGS!
So please Show some respect, when using qus1 and my commits and patchs, as well as the commits i added from other Dev's (with proper credits/ git authorization)
Fail to comply and i will drop this project
Rules
- Don't ask for ETA (that's rude), i do work for an living, and this things are very time consuming.
- Search in the thread, before asking something, Keep of the spamm
- Be Polite
- Don't ask me to "port" the rom and Kernel to Phone "x", im already maintaining this rom and kernel (and i don't own this device)
Credits:
qus1 , for the initial BETA1 / Beta1 Kernel tree / Being an nice guy
superdragonpt
I would also like to thank:
bgcngm , for the MTK unpack / repack kernel scripts
XDA:DevDB Information
[ROM] [KERNEL] [KITKAT 4.4.2 - KOT49I ] MMX a110 [MT6577] , ROM for the Micromax A110
Contributors
superdragonpt, qus1
Source Code: https://github.com/dragonpt/Kernel_3.4.67_KK_MMX_a110
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KK Recovery
Based On: AOSP / MTK
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-26
Current Beta Version: 2.0
Beta Release Date: 2014-12-14
Created 2014-12-14
Last Updated 2015-02-14

How to Install / Requirements
Requirements:
- New CWM or TWRP Recovery
--> I Recommend This One
- Extended Internal UserData Partition (due to the new KK fstab, the internal Memory can't be mounted)
(Users with stock Partition Layout, can still flash this rom, however the internal SDCard can't be used
Installation / Flashing Procedure:
- Put the rom on the EXTERNAL SD Card
- FULL Wipes are mandatory (Cache/dalvik/Data/System)
- Flash the ROM
-If you wish, reboot to the recovery first, and flash the SuperSU.zip in order to ROOT the Device (ROM isn't rooted as default), After flashing the supersu.zip, reboot the Phone, Say "NO" IF the Recovery Promp about Root not instaled/damaged
[*]--> You can find the latest SuperSU Root .zip HERE

Kernel Goodies / F.A.Q / Misc INFO
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
pegasusq (Add on Beta2)
smartassv2 (Add on Beta2)
I/0 Schedulers available:
cfq <-- Default
noop
deadline
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Read Ahead 128KB
F.A.Q.
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard can´t be used as is not visible due to the new KitKat fstab (partition table)
--> It is possible to swap internal and external storages, apply the patch by :Akhilendra Gadde HERE
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q:Where are the Downloads?
A: Downloads are on the XDA DevDB Downloads TAB HERE
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay qus1 and me an beer(s)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PATCHS / Downloads:
Downloads are on the XDA DevDB Downloads TAB HERE
Mirror on my Dev-Host:
KitKat_MMX_a110_Stable_1.0.zip - 285.07 MB
The Kernel included in the Rom, is for JB (out-of-the-box) Revision
For ICS Revision (diff Camera sensors / HAL) Flash this kernel:
Kernel_mmx_a110_Stable_1.0_ICS.zip - 4.00 MB
Beta2 Downloads:
Mirror On my Dev-Host:
KitKat_a110_BETA2.zip - 296.02 MB
The Kernel included in the Rom, is for JB (out-of-the-box) Revision
For ICS Revision (diff Camera sensors / HAL) Flash this kernel:
Kernel_mmx_a110_BETA2_ICS.zip - 4.01 MB
For C2 Revision (diff ALPS- Proximity Sensor) Flash this kernel:
Kernel_mmx_a110_BETA2_C2.zip - 4.01 MB

Good work sir. Keep 'em coming.

Beta 2 link plzzz
Sir I Can't find the beta 2 ROM AND KERNEL link
help plzzz ,
BTW thanks to qus1 and snapdragonpt for the beta2
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
mdezazrock said:
Sir I Can't find the beta 2 ROM AND KERNEL link
help plzzz ,
BTW thanks to qus1 and snapdragonpt for the beta2
Click to expand...
Click to collapse
sorry for the spell mistake ---// its superdragonpt

XDA DevDB server is having server issues.
For now, im uploading to my Dev-Host ...
For the time being, check F.A.Q / Info
Regards
EDIT:
Downloads are up, on my Dev-Host
Will add them on XDA devDB server, when the server is OK (buggy now...),
it's now 04.30 am here... so i'll try to upload later into the xda server ...
EDIT2:
Of course, since i don't own this device, i can't be 100% sure if the fixs where Successfully implemented
Your Feedback is Important

superdragonpt said:
XDA DevDB server is having server issues.
For now, im uploading to my Dev-Host ...
For the time being, check F.A.Q / Info
Regards
Click to expand...
Click to collapse
Thankyou for your work sir.. my a110 is ICS out of the box.
But "C2 Revision (diff ALPS)" means is it JB out of the box? or something else?

for C2 what ALSPS is use for the proximity? is it still the same? cm307? hope transparent status bar work on this one :fingers-crossed:
thanks! (Y)

@superdragonpt
Nice wrok bro.
I am right now enjoying the beta 1 and I just have 2 queries,
1. Is sim management section in settings available in the beta 2 version?
2. how do i change the 3g setting (that is setting sim 2 to have 3g and changing it back to sim1) in beta1 and beta2?

Thank u , sir
Thank u for making my C2 alive agin.... Downloading the ROM
Also i hope the Whatsapp notification prblm fixed..

Awesome KitKat ROM ....
Cons:
Signal for sim 1 is always too low...
Sim management option missing..
Internal memory card bug
GPS not locking..quickly taking a lot of time
Pros:
Are in abundance ...
First its KitKat...so after waiting for so long ....finally. Breathe of relief...
Xpose is working...
Still testing ...
In the evening will give a detailed review
Sent from my a110 using XDA Free mobile app

to add up from the post above there is still no way to make transparency on status bar

What do you mean by internal sd bug that internal sd not mounting.

review
today you made my day brother
have proud on 2 things :
1. to have MMX a110
AND
2. developer like you
thank for making this rom. i like it very much
i am testing it give you review very soon
1 issue i found is Signal for sim 1 is always too low...

Yup
Sent from my a110 using XDA Free mobile app

sync contact
hello.
i got some problem.
my google contact didn't sync with the phone.
other than that, nothing i guess.
will update later if got more problem.
cheers!

Mine is ICS out of box.
Working:
- USb Teathering working
- Hot spot working
- GPS ( Fixed in google map in 3 seconds), wifi, Bluetooth, camera working.
- Internal and external SD card both are mounting
- Almost every functionality is working
Not working:
- Still status bar is not transparent.
- Sim management is missing for 2nd sim
...........................................................**************************....................................................................
Thanks Dev for this Kitkat Rom

@superdragonpt sir , I feel there is a touch lag issue in my device , I have flashed the required patches and everything
Only thing I'm facing is a touch response and scrolling issue
Please help

Thanx man
For Sunday gift .
Will give review soon

man i think status bar problem is due to launcher.There is a Xposed module for transperency.
Links:
http://repo.xposed.info/module/com.woalk.apps.xposed.translucentstyle
http://repo.xposed.info/module/com.woalk.apps.xposed.ttsb