The 16 GB Micro SD on the X7510...does it work ???
If yes, any comment as to speed especially on watching videos and playing music. I have my X7510 setup that all my necessary files and programs were installed in my Flash Disk, so the only thing that is going in the Micro SD card is music and videos.
It is also cheap now... at Amazon it only cost 63 USD.
cktlcmd said:
The 16 GB Micro SD on the X7510...does it work ???
If yes, any comment as to speed especially on watching videos and playing music. I have my X7510 setup that all my necessary files and programs were installed in my Flash Disk, so the only thing that is going in the Micro SD card is music and videos.
It is also cheap now... at Amazon it only cost 63 USD.
Click to expand...
Click to collapse
I have had some troubles with Sandisk 16 micro SDHC (via a converter to mini, of course), purchased about a month ago. After two weeks of joy it just decided to disappear all files on it. Yesterday I have got a replacement, will see what happens.
The user manual say SD card, not going into details, so SDHC may be a problem, although SDHC for X7510 is mentioned most everywhere else.
If you got some hard facts, pls. let me know too, and vice versa.
Cheers.
Newbie11 said:
I have had some troubles with Sandisk 16 micro SDHC (via a converter to mini, of course), purchased about a month ago. After two weeks of joy it just decided to disappear all files on it. Yesterday I have got a replacement, will see what happens.
The user manual say SD card, not going into details, so SDHC may be a problem, although SDHC for X7510 is mentioned most everywhere else.
If you got some hard facts, pls. let me know too, and vice versa.
Cheers.
Click to expand...
Click to collapse
Thanks for the update. I will be purchasing one soon.
Do you use WM5torage? Because on my X7510, that software does not work properly. Does not matter what version I use. It might be the culprit on yours.
cktlcmd said:
Do you use WM5torage? Because on my X7510, that software does not work properly. Does not matter what version I use. It might be the culprit on yours.
Click to expand...
Click to collapse
Nope, I use either the regular ActiveSynch or connect using that second option
(settings/connections/USB to PC/ Disk Drive). I am quite unhappy with both, in fact - the first is too slow and fails unpredictably when large volume are copied, the second shows only the Flash Disk and tends to mess up the HTC when you disconnect.
So I have decided today to try out the nueMassStorage:
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
Anything to be aware of re the SDHC card?
Newbie11 said:
Nope, I use either the regular ActiveSynch or connect using that second option
(settings/connections/USB to PC/ Disk Drive). I am quite unhappy with both, in fact - the first is too slow and fails unpredictably when large volume are copied, the second shows only the Flash Disk and tends to mess up the HTC when you disconnect.
So I have decided today to try out the nueMassStorage:
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
Anything to be aware of re the SDHC card?
Click to expand...
Click to collapse
Let us know how the nueMassStorage application works on your X7510.
From my experience with my SDHC card, NEVER format it using your computer. Use a compatible card reader or if ever you get WM5torage to work properly, use that with the micro SDHC card in the X7510.
There is another option, SOFTICK CARD EXPORT: http://www.softick.com/pocket-pc/cardexport2/
It's not free though.
Hi all,
I use my X7510 since a few weeks with a 16GB MicroSD with MiniSD adaptor.
I use it everyday with iGO 8 navigator installed from the SD card and I have no problems.
I'm waiting feedbacks about nueMassStorage also to see if we can have direct access to SD card from the PC.
cktlcmd said:
Let us know how the nueMassStorage application works on your X7510.
From my experience with my SDHC card, NEVER format it using your computer. Use a compatible card reader or if ever you get WM5torage to work properly, use that with the micro SDHC card in the X7510.
There is another option, SOFTICK CARD EXPORT: http://www.softick.com/pocket-pc/cardexport2/
It's not free though.
Click to expand...
Click to collapse
Thanks for the tips. Re SOFTICK CARD EXPORT: I have used it with my now defunct TREO 650, and it is not very speedy. So I shall skip it for now.
About the formatting of the card: in any case when I have tried to format it (straight from the shop) on X7510, formatting was prevented for some mysterious reason, so I can't do it in any case.
nueMassStorage is a cool one. It created a second "USB to PC" icon, identical to the original one, in the Settings/Connections (well, I wish it were a bit different, but it's not a big deal).
It connects only to the storage card, which was a surprise, otherwise it works perfectly well and when disconnected doesn't cause any hiccups on HTC side.
Another small issue - there was supposed to be a popup that is triggered when you connect the synch cable, but it doesn't work so far.
So for small files I can use the regular synch, and for big ones - nueMassStorage. It means that if I need to load a big file to the flash disk, I'll have to copy it first to the storage card and then move it to the final destination. Not very convenient, but better than nothing.
cktlcmd said:
Let us know how the nueMassStorage application works on your X7510.
From my experience with my SDHC card, NEVER format it using your computer. Use a compatible card reader or if ever you get WM5torage to work properly, use that with the micro SDHC card in the X7510.
There is another option, SOFTICK CARD EXPORT: http://www.softick.com/pocket-pc/cardexport2/
It's not free though.
Click to expand...
Click to collapse
Thanks for the tips. Re SOFTICK CARD EXPORT: I have used it with my now defunct TREO 650, and it is not very speedy. So I shall skip it for now.
About the formatting of the card: in any case when I have tried to format it (straight from the shop) on X7510, formatting was prevented for some mysterious reason, so I can't do it in any case.
nueMassStorage is a cool one. It created a second "USB to PC" icon, identical to the original one, in the Settings/Connections (well, I wish it were a bit different, but it's not a big deal).
It connects only to the storage card, which was a surprise, otherwise it works perfectly well and when disconnected doesn't cause any hiccups on HTC side.
Another small issue - there was supposed to be a popup that is triggered when you connect the synch cable, but it doesn't work so far.
So for small files I can use the regular synch, and for big ones - nueMassStorage. It means that if I need to load a big file to the flash disk, I'll have to copy it first to the storage card and then move it to the final destination. Not very convenient, but better than nothing.
Newbie11 said:
It connects only to the storage card, which was a surprise, otherwise it works perfectly well and when disconnected doesn't cause any hiccups on HTC side.
Another small issue - there was supposed to be a popup that is triggered when you connect the synch cable, but it doesn't work so far.
Click to expand...
Click to collapse
It connects only to the Flash Disk for me, although the first time I ran it, it connected to my 16 GB Storage Card; after that, it always shows the flash disk.
You can find the Pop Up if you look in the Windows folder and look for nueStoragePopUp.exe file. You can create a shortcut under Windows/Start Menu/Programs/"to whatever folder you want".
After that you can ran the shortcut and a Pop Up Notification will appear with 3 options.
UPDATE: The Sandisk 16 GB Micro SDHC on a Mini Sandisk Adaptor works great. I love it.
Thanks for the tip - created a pop-up in the Resco Today Plugin, it works as prescribed. Still shows only the storage card, though.
I guess it is decided on the dice throw ;-)
Happy New Year!
Hello all,
I have a strange behavior :
32 gigs SD card unlocked
I can read write on PC but when I insert it into the SD slot of the Transformer's dock the property is switched to Read only.
If I take the same SD card and put in into a dongle and plug it into the USB slot : the property is now Read & Write...
Any hint please ?
Fand'
Anybody at least has faced this trouble ?
What program are you using to access the SD card in android? Where does it tell you that it is read-only/read-write.
I know in root explorer there is a toggle for read-write/read-only.
Can't say I have the same problem as you, but I have my own SD card problem with the dock.
fandaor said:
Anybody at least has faced this trouble ?
Click to expand...
Click to collapse
I haven't faced this trouble with an SD card, but I have tried to plug in a 8GB USB Thumb Drive to the USB port on the dock and the TF won't even recognize it. So there may be some bug there that might be fixed with HC 3.2 update
Also, I have used a 2GB SD Card in the SD Card slot on the TF dock and it worked fine for me. I have the dock with serial # B50KAS, running stock HC 3.1.
Hello,
I use ES File Explorer.
The same SD card inserted in the dock in the SD reader has a property : Read
If I use a USB dongle, insert the sd card and plug it into the dock, the property is then Read Write...
Tried with another SD card and it worked normally (but it was a 16Gb).
Soooooo weird.
I will wait for the next update to see if there is any issue solve on the SD reader... sounds like a little problem for managing high capacity SD card.
Fandaor
Hi,
I can use my 16GB micro SD in the pad itself, but if I try to use a regular SD card it doesn't mount. Not even if I remove the micro SD. Is this a known issue, or is it just something with mine?
Cheers!
of what capacity is the regular sd card? I think (might be wrong) that the dock doesn't support certain capacities of cards. I have only ever used a microsd card in an adapter in the dock and that worked fine. Have you tried a reboot with the card in? can you see it in the file manager at all? I found that, when I can't mount a card, that switching file managers will work about 95% of the time.
I hope that helped a little bit
Well, imagine that i have that card but it seems to be dead or so, when i use an adapter and put it into my laptop's card reader, or i use the USB card adapter i cannot get the card shown in windows explorer of my Win 7 x64.
When i go to Computer Management > Disk Management, the card is not shown on the top window, but on the bottom one, it is shown, but when i right click on it there is nothing i can do except of changing drive letter.
Any ways of reanimating, reformatting the card? I do not care about the data in it, i want the card to be usable. Thanks
Anyone?
you need a update please check your windows update there is ad update for support of sd up 32 GB
Well, the card is 64 GB, not up to 32.
What i mean that this card used to work before, i could transfer files to it, but then after a month i cannot access it
Hello all-
I'm trying to format a Micro SD card to transfer data between my WIndows computer, Fire tables, and Pixel 2. Since I know that Android won't natively recognize NTFS and I have some large files I'm trying to use exFAT. So far I've had no problems with the Windows and Fire tablets but I can't seem to get the phone to recognize the card (inserted into the Google provided "Quick Switch Adapter"/OTG adapter using a Micro SD to USB adapter). All the phone seems to recognize is a drive formatted with FAT32.
Has anybody had any success with exFAT? I'm surprised that the Fire tablets have no problems reading the card since it's running an OS based on Lollipop and the phone is on the latest & greatest version. Maybe it's the adapter I'm using??
Any help with the mystery is appreciated.
I would recommend checking out this app... https://play.google.com/store/apps/details?id=com.paragon.tcplugins_ntfs_ro&hl=en_US