Database Info

[ROM] Unofficial Cyanogenmod 10 for Hyundai A7HD

A while ago I replaced the factory rom of my Hyundai A7HD (also called the Cherry M-728) and installed Cyanogenmod version 10 on it. It runs pretty smooth, MUCH better than the stock rom will ever run.
For those of you who are not familiar with Cyanogenmod (CM), this is an alternate version of Android (it does run all Android apps) that supposedly runs a lot better than most stock androids. Due to the subjective nature of "smooth", I'll give you my personal opinion on it: it's worlds apart, cannot compare to the stock rom at all. The A7HD had some nasty bugs in it, including wonky wifi (partially fixed with CM10), low screen brightness (increased in CM) and cyanogenmod generally brings much better performance and battery life with it. It also doesn't get as damn hot with CM. The raw gaming experience won't be much affected, though apps like the android market used to take absolutely AGES to start up; this is reduced to near-instant. Truly what an Allwinner A10 tablet should deserve.
TL;DR - tablet experience was great improved with CM10 on A7HD
Please read this guide carefully and don't complain that it is faulty because I've tested it myself and it works fine. The good side is that the Hyundai A7HD is very difficult to permanently brick. Although the firmware updater (Livesuit) thread is written in Dutch, it can be used to return the A7HD to its factory rom without a hitch. During the installation of CM10, the device needs to be formatted so please make sure to move all your personal files off of the internal storage (onto external SD).
It goes without saying that your battery should be full and the device plugged into the ac-adapter (preferably not usb as it delivers less power and cannot sustain the tablet)
The step-by-step guide starts here:
Step 1: Download Clockworkmod (CWM), download here:
http://files.androtab.info/allwinner/cm9/20120308/NOVO7AE/a10_recovery.zip
ALTERNATIVE LINK: https://skydrive.live.com/redir?resid=8E7A3231B094ABEA!6638&authkey=!AOHu-FqMlRpkFQc
Unzip and put all three files on the internal storage of your tablet.
Step 2: Download these three zips (they are the CM10 rom image, "Google Apps" containing the basic necessities such as Market and a driver compatibility pack for the A7HD to get the camera, wifi and touchscreen working):
http://allwinner-cm9.googlecode.com/files/cm10_a10_20120913.zip
http://allwinner-cm9.googlecode.com/files/gapps-jb-20120726-signed.zip
http://old.androidfilehost.com/main...ntroy/misc/1.2.x/a7hd_compatibility_1.2.0.zip
ALTERNATIVE LINKS:
https://skydrive.live.com/redir?resid=8E7A3231B094ABEA!6639&authkey=!ABnU4BVPWrpTwhg
https://skydrive.live.com/redir?resid=8E7A3231B094ABEA!6640&authkey=!AJ0NyMfFa0jkrb0
https://skydrive.live.com/redir?resid=8E7A3231B094ABEA!6641&authkey=!ADdtoPRuaPWGxaQ
DO NOT UNZIP THESE FILES!!, put the three zips on the internal storage of your tablet, such as the "downloads" directory.
Step 3: Install the program "Script Manager - SManager" from the android market. Upon first start-up, select "Browse as root" and press "Ok".
Step 4: Using SManager, navigate to the directory containing the three unzipped Clockworkmod files. Click on the "install-recovery.sh" file. Select the option "Su" for admin-rights, and after that press "Run" to get the shell-script(sh) running. It'll take a little while. Go back to SManager , and run "reboot-recovery.sh" (again using Su). This will restart the tablet into CWM bootloader mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 5: You are in CWM bootloader now (see image above as a reference). Because the A7HD does not have vol-up and vol-down buttons (why!), the POWER button represents "Ok" , HOME and MENU both represent "cursor up" and the BACK button functions as "go back". PLEASE FOLLOW THE NEXT STEPS IN EXACT ORDER!!
Step 6: Push the menu-button until the cursor selects "Wipe cache partition". By clicking the "power" button, you select the option the cursor is at. Agree to the question stating again that you'll lose all your data (as it's what you expected to happen, right?).
Step 7: Now select "Wipe data/factory reset". Agree to losing all data. Not doing this step will result in a faulty CM10 installation, so please just do the wipe. This will not delete the zips you've places on your internal memory.
Step 8: Navigate to "install zip from SD card", further on select "choose zip from internal sd card" and browse to the folder containing the three zips. FIRST INSTALL cm10_a10_20120913.zip!!!, SECOND YOU MUST INSTALL "a7hd_compatibility_1.2.0.zip". DO NOT INSTALL "gapps-jb-20120726-signed.zip" YET!! It's very important that you now press back and reboot the device.
Step 9: Cyanogen is now starting for the first time on your device; give it a minute or two. Android will go through the first couple of standard questions, take your time if you want to and breath easily now that all is good. However, Android Market is not yet installed. Start the program "updateMe", go to the settings tab and select the option "reboot to recovery" all the way to the bottom. This will cause your tablet to reboot back into CWM for the last step.
Step 10: Now that you're back in CWM, please don't do a wipe or you'll lose all your hard work. Again go to "install zip from sd card", , again "choose zip from internal sd card" and choose the file "gapps-jb-20120726-signed.zip". After the installation has completed, you can reboot your tablet. Android will claim it's "updating" some programs during start-up; one of these programs is the play store and all supporting binaries for it.
Step 11: If everything went well, you now have a fully functional A7HD tablet running Cyanogenmod 10. In the android settings, there are a couple of new menus; Please don't change anything in the "performance" tab, it'll just crash your tablet. Especially fiddling with the CPU frequency is a very bad idea as the internal voltage regulators are not powerful enough to sustain >1ghz operation of the ARM core.
Personally I think everything runs a lot smoother in CM10. My wifi connection used to drop upon connecting the HDMI-out to my TV; This bug has been fixed in CM10. The battery-bug has also been solved; you can run the tablet all the way down to 0%. The screen brightness can now be set much higher than on the stock rom. HOWEVER, do not put it to maximum; as the screen has not been designed for this (It'll probably fail at maximum setting, please put it at around 75% tops). Of course cyanogenmod contains a lot more options and possibilities for customization. Though, you'll have to look those up yourself . If you really can't figure it out, drop a message in this thread and maybe you'll get a clear answer, though I hope this guide speaks for itself... Enjoy !
I'd like to thank the author of this thread: http://forum.xda-developers.com/showthread.php?t=1821398 for his work on this rom and its compatibility. I've just written this easy guide out for those who are a bit overwhelmed by the difficulties of replacing a stock rom.

Great ROM but volume control missing
Thank you redtails. Great post and works like a charm.
Only issue I have is that volume control does not work any more since the A7HD does not have volume rockers (why?!). The original firmware incorporated the volume control in the status bar which the mod rom does not. Any chance to fix this or guide me as to how I can change volume? Thanks.

..

Thank you for this. Worked like a charm. Much better experience with cm10 than stock.

blackon said:
Thank you for this. Worked like a charm. Much better experience with cm10 than stock.
Click to expand...
Click to collapse
Whatever you do, don't accidentally erase the internal storage from the Settings>Storage page. I did that and had to go through ADB>Parted to find the internal storage partition. [ /dev/block/nandi , by the way ] . Repartitioned using command mkpartfs to get back to FAT32.

Funciona para hyundai e435 plus?

[ROM] Best custom roms for Huawei Ascend G610S (G610-U00) with complete install guide

Well, as you know, G610-U00 emotion UI (Official Stock firmware) is annoying, lets try to change the overall UI completely from boring Chinese UI into popular phones' UI.
Before we go, back up everything you need (Apps, Contacts, etc...)
Your phone bootloader must be unlocked to do these processes!!!!
1.Download and install VRoot ENGLISH VERSION on PC and root Your G610-U00 first. (Skip this step if you have already rooted your phone)
2.Download and install Mobile Uncle Tools on your phone.
3.Download TWRP English recovery for G610-U00 first and put it in SD card.
4.Download Rom below that you want to install and put it in SD card.
5.Open Mobile Uncle Tools and "Allow" root Permission and choose "Recovery Update" in Mobile Uncle Tools and then
choose "ydss-g610-u00-twrp-recovery-en-v2.0".
6.Mobile Uncle Tools will show you a message "Reboot into Recovery?" Choose "Yes".
You can also go to recovery mode this way
(1)Power off your phone
(2)Press and "HOLD" volume up button and then power button until you get into RECOVERY MODE.
7.In the TWRP recovery,
(1)Choose "Wipe"
(2)Choose "Advance Wipe"
(3)Choose Dalvik Cache, Cache, Data, System
(4)Pull the Slider below from the left to the right. Now your Phone is clean and ready to install new ROM
(5)Go Back to the menu with Back Key
(6)Choose the button "Install"
(7)Choose the ROM (zip) you have downloaded
(8)Pull the Slider below from the left to the right to install the zip and wait for the installation process
(9)After Installation process choose "Reboot"
ENJOY YOUR NEW ROM!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note (Optional) : For better experience, when you want to download, you should use Chrome Browser to translate pages because the download pages are written in Chinese. If you don't have Chrome Browser, just see the image at the end of the post how to download from.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Files to download
G610-U00 custom ROMS(All Roms Have Root Access)
Edit : Google drive link for those who can't access Baidu (by a request).
Google App Installer for no google app included roms(Installing using apk, Need root access)
DEFAULT LANGUAGE IS CHINESE, AFTER BOOT UP, GO TO SETTING>LANGUAGE AND INPUT>LANGUAGE>CHANGE TO ENGLISH.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In any case, if you want to go back to official stock firmware,
(1) Download and flash it in TWRP RECOVERY (I'm not sure it would work in CWM but has 70% success rate )
(Without flashing this stock recovery in TWRP, you won't able to flash Official Firmware).
(2)Download extract the downloaded zip and copy the "dload" folder to SD card.
(3)Power off the phone and Press and Hold "Volume Up + Volume Down and Power Button" until you see the install processing cmd lines on your phone. Wait for the process and the phone will reboot automatically after update finish.
Now you are on the official stock firmware.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Notice : YOUR PHONE MIGHT TAKE 10 TO 15 MINUTES TO FINISH BOOT AFTER "FLASHING (INSTALLING) NEW CUSTOM ROM" OR "INSTALLING OFFICIAL STOCK FIRMWARE". IF IT WOULD TAKE LONG MORE THAN 15 MINUTES, JUST PULL THE BATTERY AND BOOT AGAIN. THIS COULD SOLVE THE PROBLEM OF TAKING LONG TO BOOT.
***IMPORTANCE*** : FROM PHONE SETTINGS, NEVER DO "FACTORY DATA RESET" OR NEVER "UNMOUNT" "INTERNAL SD CARD OR INTERNAL STORAGE" WHILE YOU ARE ON "CUSTOM ROMS". IT WILL LEAD TO BOOTLOOP. IF YOU WANT TO DO FACTORY DATA REST GO TO TWRP RECOVERY AND CHOOSE WIPE, PULL SLIDER TO DO FACTORY RESET. IF YOU EXPERIENCE THIS PROBLEM, SEE ABOVE METHOD "GOING BACK TO STOCK FIRMWARE" AND INSTALL CUSTOM ROM PROCESS AGAIN.
I am not responsible for any damage to your phone caused by following this method. I have tested this method and it is working smoothly for me. Be sure to do precisely as my instructions and I am pretty sure this will work 100%. Good Day to you.
Post below to ask any question.
Credits to
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
S4 ROM
XPERIA C ROM
AOSP ROM
MIUI ROM

Post below if you want to know about some mods for these roms,
like removing "3G" signal prefix,
hiding second No SIM slot,
using themes on AOSP roms,
S3/S4 icons, S3/S4 or LG lock screens with S4 and Xperia Launchers
Xperia Music Players with Acid Audio Engine version working on these roms
more features I have collected and tested for these roms...
G610S is cheap and has resonable specs, so I decided to show the ways I have tested,
I don't mean I know everything.
Brands, Mods and Roms are properties of their respective authors/companies.
I am sharing the working way I have tested many times on these roms.
Thanks for reading. Good day to you!
Click "Thanks" button if I made some help for you.

hi
are all these roms compatible with g610-u20? thanks!

geloko said:
are all these roms compatible with g610-u20? thanks!
Click to expand...
Click to collapse
I am sorry these are only for G610-u00.

Feel free to share something about your experience installing these custom ROMS. I want to hear your feedback, my dears. ♥
Sent from my G610-U00 using xda app-developers app

I never went to recovery mode after clicking yes on mobile uncle tools and now my mobile is stuck in bootloop... Could you please help me find a way out????
My mobile is G610-U20.. that's where I made a mistake....

thesumanthapa said:
I never went to recovery mode after clicking yes on mobile uncle tools and now my mobile is stuck in bootloop... Could you please help me find a way out????
My mobile is G610-U20.. that's where I made a mistake....
Click to expand...
Click to collapse
OMG!!!
These custom roms are only for G610-U00.
You should read thoroughly before you do.
Try reflashing official firmware as my instruction.
Dont' download the firmware I provided.
This is only for G610-U00.
Download official firmware from Huawei website for G610-U20.

Goophone i5s [Custom ROMs]: iOs skinned, Stock Jelly Bean

Hello folks! This is my first post in xda and I want to share these roms for goophone i5s (if any).
This is my first post in xda by the way and I am very new with the interface so expect for flaws in this thread.
In this thread, I will include the tips and the installation processes for convenience to users.
Just take note that you have to back up everything before doing anything as usual.
Also, I assume that you have your custom recovery already installed and if not, just google it and you can find some steps to install custom recovery for mediatek devices
The ROMS :
- iOS Skinned
- Jelly Bean android stock rom
These roms were optimized for this phone to be responsive as a daily driver. All these roms were modified by the people in 4pda forum which i dont know if they are members of xda. Credits to them!
- iOs Skinned rom
This rom is a merged rom from different goophone i5s rom to mimic the look of iOs. The launcher is replace with the app "iLAuncher" for it to have a smoother experience, rooted and many more . You just have to discover it yourself.
Tips for this rom:
For better multitasking experience, you can use @zeppelinrox ultimatic patcher for a better multitasking experience and give thanks to him of course. Hats off to him
Install Greenify and XPOSED FRAMEWORK(Yes xposed framework!) to acces its experimental features. Dont get to excited about it yet since some of the modules in the xposed framework are compatible with AOSP based roms .
You cannot activate the accessibility service of this rom by the way. But with some analysis, I was able to activate it then. You mus install 2 apps: Secure Settings and E-robot which found in the playstore. Here are some of the instructions on how to use those apps to activate its accessibility service: (Assuming you have those apps installed)
1. Open Secure Setting and navigate to "SYSTEM+" (upper part) and "Enable" it
2.Open E-robot and tap the "+" button on it to add "commands". Name the command as you wish and select ok.
3. In the command, tap in "+" to add "Actions" (under actions group). Navigate to "3RD PARTY APPS" on the upper portion of the app (swipe to the left until you see it).
4. Tap on "Secure Settings". Select "System + Actions" and navigate to "Accessibility Services".
5. Next, you have now the choice of apps to be enabled. Never forget to "save" the one you have selected (save icon seen on top).
6.You will now be directed to the main page of the app, tap on "save" icon and then tap the "play" sign to execute the command and actions.
That's it! Im sorry for I did not include screenshots on this one. Just follow the steps and you'll have it
All other settings and options shall be based upon your taste
ROM Installation instructions:
Before doing anything, again, have a backup of your phone using either custom recovery or mtk droid tools to retrieve your current rom.
Also, you need the following:
- SP Flashtools v3..... (i prefer these versions )
- boot.img of your current rom. you can have your boot.img on your backups. (this is for compatibility issues so do not forget this step)
Steps: (Don't connect your usb cable yet)
1. Extract the downloaded zip file to a specified folder. After the extracting, copy your boot.img and paste it to the extracted folder (you have to replace the boot.img found in the extracted folder).
2. Open SP Flashtools run it and click "Scatter Loading". Navigate to the extracted folder and there you can see the "scatter file".
3. Click firmware upgrade. In case you failed to do it, check the files checked if it has its contents linked. In my situation, i found "USRDATA" not linked to the file extracted. Simply click it and navigate to "user data" file found in the extracted folder.
4. Click "Firmware Upgrade" again and now, this is the time that you have to connect your phone via usb cable to the computer.
5. Patiently wait for it as it downloads the files and if says "Download ok" with "green" circle, disconnect your phone and you are now good to go.
6. Boot up the phone and please do wait for it to boot up as it takes a while for it to display. You will then have a black screen with the status bar shown and wait for it until it launches the launcher
That's it and customize it as you wish
Download link of the rom: https://drive.google.com/open?id=0B3EnRaB-uXW8YlFXVjk4TlJmcjg&authuser=0
Patched services.jar for this rom for ease: https://drive.google.com/open?id=0B3EnRaB-uXW8b1hDNzAyMFFWNzQ&authuser=0
*Simply overwrite the original services.jar found in /system/framework/services.jar and give the right permissions -rw-r--r--
Note*: This "may" not be compatible with the jb android stock rom services.jar.
Just copy the URL above since I cannot direct you to the link due to xda rules
-Jelly Bean Stock Android ROM
This rom is the one I am currently using since I do envy the look and feel of android lollipop. With this rom, you can do almost everything a native android can do. Install XPOSED FRAMEWORK for you to customize it.
Tips for this rom:
Accessibility for this phone is not a problem. Only you have this annoying navigation bar which is unpleasant . You can edit the build.prop if you want to get rid of it. just google it You can also resize it using GravityBox.
Also, the developer options for this rom lacks other options like the animations, simply install "GravityBox" module and navigate to "MTK 6589......fix settings" and tap "Advanced Developer Option".
ROM Installation instructions:
You need the following:
-custom recovery
-boot.img of your current rom (boot.img of your phone rather )
Steps:
1. Put the Downloaded rom (zip file) in your sd card.
2. boot into recovery and wipe everything "wipe data and factory reset", "wipe cache partition" and "wipe the dalvik cache" (advanced)
3. After wiping everything, select "install zip from sd card" and select the zip file and install it.
4. Wait for it to finish and after the installation, I do recommend to wipe everything again and then reboot.
Enjoy!!
Download link: https://drive.google.com/open?id=0B3EnRaB-uXW8TWtUTmt5b3l4Vjg&authuser=0
Patched services.jar for this rom for ease: https://drive.google.com/open?id=0B3EnRaB-uXW8U2JSOTZ2dUtrNGc&authuser=0
*Simply overwrite the original services.jar found in /system/framework/services.jar and give the right permissions -rw-r--r--
Note*: This "may" not be compatible with the iOS Skinned rom services.jar.
Credits to @zeppelinrox for his ultimatic patcher
*Just copy the URL above since I cannot direct you to the link due to xda rules
Screenshots: (Note* : these are the results of my customization )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's all and Hope I did help those who need this rom thanks I wish to upload a video but I really don't have time.

I am requesting to have your thread moved to the right forum so that the right users would benefit.

[ROM] Dg550 KitK4tAOSP F1N4L

[url=http://*******/sYcaJ]MTK NVRAM tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​STEP 1 : BACKUP
​BEFORE MAKE ANYTHING — IMPORTANT– BACKUP YOUR IMEI NUMBER WITH MTK NVRAM TOOL. YOU CAN ALSO DOWNLOAD IT IN Links other than Needrom:
WHEN INSTALLING THIS ROM YOU LOSE YOUR IMEI NUMBER SO YOU MUST DO THIS: YOU NEED TO HAVE ROOT ON YOUR PHONE AND A RECOVERY INSTALLED LIKE TWRP 2.7
If you come from 4.2.9 Stock Rom you can root it with FRAMAROOT 1.93 –> Then install TWRP 2.7 in mobile unclemtktools with recovery update
PUT MTK NVRAM TOOL.zip into sdcard
ENTER TWRP RECOVERY :
Power off the phone, then do the following:
– Power button + volume button up, to enter the recovery mode.
INSTALL MTK NVRAM TOOL.ZIP FROM SDCARD withouth any wipe. This is a fantastic AROMA TOOL, so you only need to backup your NVRAM, then exit and return to recovery.
ATTENTION: MOBILEUNCLETOOLS DOESN'T RESTORE IMEI IN ANDROID 4.4 SO YOU HAVE TO RESTORE IT ONLY WITH MTK NVRAM TOOL
STEP 2 : INSTALL AOSP ROM
IN TWRP perform a full WIPE –> WIPE–> ADVANCED WIPE–> SELECT
– Dalvik Cache
– Cache
– Data
Return to recovery main interface and Install zip from sdcard:
- Select your ROM FILE.ZIP –> It will launch my installation procedure
- At the end, don't reboot, INSTALL ZIP FROM SD CARD –> MTK NVRAM TOOL.ZIP –> This will launch AROMA –> Restore your NVRAM/IMEI previously saved on your sdcard –> EXIT –> REBOOT SYSTEM
All done, Enjoy your new KitK4tAOSP ROM!! PATIENCE, THE FIRST BOOT IS ABOUT 5 MINUTES.
================================== ATTENTION!!! ==================================
I invite everyone to make a nandroid backup. Only if you have done the backup and you are able to restore the device then you can write me relatively few bugs in the rom or any other problem.
So ATTENTION! … You did not do a Nandroid backup? … You are not able to restore the device? … Well, do not write to me, because I will not answer to you!!
================================== ATTENTION!!! ==================================

the way to force imei restore on dg550 or any Mediatek phone
In order to force imei restore in some instructions on screen nes like doogee dg550 for example you must follow these instructions :
Download and install the Kingroot APK from their website.
Open the APK in your phone and press the big circle 2 times untill it starts circling.
After you get ROOT ontice download from Google play the Busy Box APK - open it and confirm root access when Kingroot pop ups.
Now press the Install icon.
Go to Settings of your android phone and in Developers advanced settings ensure that USBDeDebugging is enabled.
Now install to your PC the lattest newest version of MTK root tools.
You must ensure that your PC has Mediatek drivers if not you shoukd install these ADB drivers. - google it...
Extract the ZIp content of MTK droid tools file to new folder and click the small Bird drawing icon.
Now connect the phone to your PC and make sure mtk droid tools reads it.
Now you should have the small square icon on bottom left side turn into yellow color.
Click the root icon and click YES to every popup - wait until the square indicator becomes green.
Now press the IMEI... icon and follow the instructions on screen than reboot your phone. s
By the way the IMEI numbers apear on a sticker under the battery of phone.

alone10 said:
In order to force imei restore in some instructions on screen nes like doogee dg550 for example you must follow these instructions :
Download and install the Kingroot APK from their website.
Open the APK in your phone and press the big circle 2 times untill it starts circling.
After you get ROOT ontice download from Google play the Busy Box APK - open it and confirm root access when Kingroot pop ups.
Now press the Install icon.
Go to Settings of your android phone and in Developers advanced settings ensure that USBDeDebugging is enabled.
Now install to your PC the lattest newest version of MTK root tools.
You must ensure that your PC has Mediatek drivers if not you shoukd install these ADB drivers. - google it...
Extract the ZIp content of MTK droid tools file to new folder and click the small Bird drawing icon.
Now connect the phone to your PC and make sure mtk droid tools reads it.
Now you should have the small square icon on bottom left side turn into yellow color.
Click the root icon and click YES to every popup - wait until the square indicator becomes green.
Now press the IMEI... icon and follow the instructions on screen than reboot your phone. s
By the way the IMEI numbers apear on a sticker under the battery of phone.
Click to expand...
Click to collapse
Could you please make a video explaining the process?.

「Android 10 Update」#Beta# Android Q Beta Preview for OPPO Reno

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The preview version of OPPO Reno (standard edition) Android Q Beta is available. Developers are welcome to download this version and adapt their apps to it. Normal users are advised not to download it because known issues exist.​
Adaptation Risk Description
1. Make sure that your phone is the OPPO Reno standard edition (model：CPH1917EX). Only this edition is supported currently.
2. The adaptation will clear your phone data. Make sure that you have backed up important data before the adaption.
3. This Android Q Beta version is provided for developers to experience new features in advance. Normal users are advised not to use it because know issues exist.
Android Q Beta New Features
1. Security and Privacy
(1) Application Permission Notifications
The permissions management is improved:
Location permissions can now be set to "Allow only when in use" to reduce the risk of geographical location leakage while saving power.
At the same time, in Settings or notification drawer, you can easily see which apps are using permissions that may involve privacy. The permissions management UI has been redesigned. Buttons are enlarged and are laid out vertically to reduce mistouch.
(2) Random MAC Address
You can choose to connect to Wi-Fi with a random MAC address. In this way, your private information like your mobile number and consumption records cannot be obtained by advertisers according to your MAC address.
(3) Storage Permission Management
Android Q provides an "isolated storage sandbox" for each app. Other apps cannot directly access the files in the sandbox, effectively preventing private files from leakage. However, some shared files such as photos, videos, music, and downloads can be accessed with requested permissions.
(4) Clipboard Permissions
Clipboard permissions are also strictly controlled. Third-party apps cannot read your copied content if not permitted.
2. ANGLE Renderer
The ANGLE renderer accelerates the migration of the software ecosystem to Vulkan by translating the WebGL and OpenGL ES code from an app into a Vulkan API supported by the local hardware. This improves the fluency of 2D and 3D rendering, making animation more smooth and fluent.
3. Bubble
Bubble is a new feature in Android Q. With bubbles, you can easily process multiple tasks from anywhere on your device. Bubbles are built into the notification system. They float on the top of the content of other apps, and can be collapsed when not in use. You can tap a bubble to view app features and information, or dismiss it by moving it or dragging it down.
For more features, click the Google official website, tap here.
Adaptation Procedure
(1) Backup. Make sure that your phone model is OPPO Reno (model：CPH1917EX) and back up your phone data. Path: Settings - Other Settings - Back Up & Restore - New Backup
(2) Copy. After the backup is complete, the file is located in the -backup folder under the root directory. You need to copy the file to a computer or other storage device to save it.
(3) Download. Download the Android Q Beta upgrade firmware package and copy it to the phone storage directory.
(4) Installation. Power off the phone, and press and hold the power button and the volume down button to enter the Recovery mode. Select the upgrade file, find the corresponding upgrade firmware package, and tap Install.
Note: Do not perform any operations on the phone during the upgrade. When the upgrade is complete, a dialog box indicating successful installation will pop up. Tap Restart. The phone will be successfully upgraded to the Android Q Beta version after the restart.
If you cannot pass the Wi-Fi verification after flashing Android Q Beta on your Reno phone, roll back your phone to ColorOS.
Using the following method:
1. Download the ADB flash tool
2. Unzip the flash.zip package and open the folder. Copy the downloaded rollback package (tap here to download it) to the flash folder.
3 Power off your phone, and press and hold the power button and the volume down button to enter the Recovery mode. Select "Apply update from ADB" and press the power button to confirm the rollback.
4. Connect your phone to the computer. If the computer prompts you to install the driver, wait for the computer to automatically install the driver.
5. Double-click flash.bat in the flash folder and press Enter to start flashing.
6. Do not disconnect your phone from the computer during the flashing.
Required Downloads Files
1. ADB Flash Tool
2. Flash.zip ( From 2nd Steps )
Link is not allowed to share for new users as of now.
Rollback to ColorOS 6
We will provide firmware before June—Reno (model：CPH1917EX)
Flashing Method:
1.Download. Download the UpdateBack2ColorOS.zip package for rollback to ColorOS 6 and copy the package to the phone storage directory.
2.Installation. Power off the device, and press and hold the power button and the volume down button at the same time to enter the Recovery mode. Open the Apply update from Phone Storage package folder, find the corresponding rollback package, and press the power button to confirm the rollback.
Note: Do not perform any operations on the phone during the rollback. When the rollback is complete, a dialog box indicating "install from phone complete" will pop up. Tap Reboot system now and press the power button. The phone will be successfully rolled back to ColorOS 6 after the restart.