Hello folks! This is my first post in xda and I want to share these roms for goophone i5s (if any).
This is my first post in xda by the way and I am very new with the interface so expect for flaws in this thread.
In this thread, I will include the tips and the installation processes for convenience to users.
Just take note that you have to back up everything before doing anything as usual.
Also, I assume that you have your custom recovery already installed and if not, just google it and you can find some steps to install custom recovery for mediatek devices
The ROMS :
- iOS Skinned
- Jelly Bean android stock rom
These roms were optimized for this phone to be responsive as a daily driver. All these roms were modified by the people in 4pda forum which i dont know if they are members of xda. Credits to them!
- iOs Skinned rom
This rom is a merged rom from different goophone i5s rom to mimic the look of iOs. The launcher is replace with the app "iLAuncher" for it to have a smoother experience, rooted and many more . You just have to discover it yourself.
Tips for this rom:
For better multitasking experience, you can use @zeppelinrox ultimatic patcher for a better multitasking experience and give thanks to him of course. Hats off to him
Install Greenify and XPOSED FRAMEWORK(Yes xposed framework!) to acces its experimental features. Dont get to excited about it yet since some of the modules in the xposed framework are compatible with AOSP based roms .
You cannot activate the accessibility service of this rom by the way. But with some analysis, I was able to activate it then. You mus install 2 apps: Secure Settings and E-robot which found in the playstore. Here are some of the instructions on how to use those apps to activate its accessibility service: (Assuming you have those apps installed)
1. Open Secure Setting and navigate to "SYSTEM+" (upper part) and "Enable" it
2.Open E-robot and tap the "+" button on it to add "commands". Name the command as you wish and select ok.
3. In the command, tap in "+" to add "Actions" (under actions group). Navigate to "3RD PARTY APPS" on the upper portion of the app (swipe to the left until you see it).
4. Tap on "Secure Settings". Select "System + Actions" and navigate to "Accessibility Services".
5. Next, you have now the choice of apps to be enabled. Never forget to "save" the one you have selected (save icon seen on top).
6.You will now be directed to the main page of the app, tap on "save" icon and then tap the "play" sign to execute the command and actions.
That's it! Im sorry for I did not include screenshots on this one. Just follow the steps and you'll have it
All other settings and options shall be based upon your taste
ROM Installation instructions:
Before doing anything, again, have a backup of your phone using either custom recovery or mtk droid tools to retrieve your current rom.
Also, you need the following:
- SP Flashtools v3..... (i prefer these versions )
- boot.img of your current rom. you can have your boot.img on your backups. (this is for compatibility issues so do not forget this step)
Steps: (Don't connect your usb cable yet)
1. Extract the downloaded zip file to a specified folder. After the extracting, copy your boot.img and paste it to the extracted folder (you have to replace the boot.img found in the extracted folder).
2. Open SP Flashtools run it and click "Scatter Loading". Navigate to the extracted folder and there you can see the "scatter file".
3. Click firmware upgrade. In case you failed to do it, check the files checked if it has its contents linked. In my situation, i found "USRDATA" not linked to the file extracted. Simply click it and navigate to "user data" file found in the extracted folder.
4. Click "Firmware Upgrade" again and now, this is the time that you have to connect your phone via usb cable to the computer.
5. Patiently wait for it as it downloads the files and if says "Download ok" with "green" circle, disconnect your phone and you are now good to go.
6. Boot up the phone and please do wait for it to boot up as it takes a while for it to display. You will then have a black screen with the status bar shown and wait for it until it launches the launcher
That's it and customize it as you wish
Download link of the rom: https://drive.google.com/open?id=0B3EnRaB-uXW8YlFXVjk4TlJmcjg&authuser=0
Patched services.jar for this rom for ease: https://drive.google.com/open?id=0B3EnRaB-uXW8b1hDNzAyMFFWNzQ&authuser=0
*Simply overwrite the original services.jar found in /system/framework/services.jar and give the right permissions -rw-r--r--
Note*: This "may" not be compatible with the jb android stock rom services.jar.
Just copy the URL above since I cannot direct you to the link due to xda rules
-Jelly Bean Stock Android ROM
This rom is the one I am currently using since I do envy the look and feel of android lollipop. With this rom, you can do almost everything a native android can do. Install XPOSED FRAMEWORK for you to customize it.
Tips for this rom:
Accessibility for this phone is not a problem. Only you have this annoying navigation bar which is unpleasant . You can edit the build.prop if you want to get rid of it. just google it You can also resize it using GravityBox.
Also, the developer options for this rom lacks other options like the animations, simply install "GravityBox" module and navigate to "MTK 6589......fix settings" and tap "Advanced Developer Option".
ROM Installation instructions:
You need the following:
-custom recovery
-boot.img of your current rom (boot.img of your phone rather )
Steps:
1. Put the Downloaded rom (zip file) in your sd card.
2. boot into recovery and wipe everything "wipe data and factory reset", "wipe cache partition" and "wipe the dalvik cache" (advanced)
3. After wiping everything, select "install zip from sd card" and select the zip file and install it.
4. Wait for it to finish and after the installation, I do recommend to wipe everything again and then reboot.
Enjoy!!
Download link: https://drive.google.com/open?id=0B3EnRaB-uXW8TWtUTmt5b3l4Vjg&authuser=0
Patched services.jar for this rom for ease: https://drive.google.com/open?id=0B3EnRaB-uXW8U2JSOTZ2dUtrNGc&authuser=0
*Simply overwrite the original services.jar found in /system/framework/services.jar and give the right permissions -rw-r--r--
Note*: This "may" not be compatible with the iOS Skinned rom services.jar.
Credits to @zeppelinrox for his ultimatic patcher
*Just copy the URL above since I cannot direct you to the link due to xda rules
Screenshots: (Note* : these are the results of my customization )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's all and Hope I did help those who need this rom thanks I wish to upload a video but I really don't have time.
I am requesting to have your thread moved to the right forum so that the right users would benefit.
Related
- OVERVIEW -
This Guide is designed to Teach the up and coming developers and Modders that have a Samsung Transform Ultra how to modify and customize their devices.
It is also here to serve as a one stop shop for experienced Users who are looking for the correct files to edit or root their device.
Sections said:
Section 1:
Tools files and overview.
Section 2:
ClockworkMod Recovery and Root
Section3:
Finding and Installing Custom Roms
Section 4:
Re-Installing the Stock Rom and Recovery
Section 5:
CREDIT!
Click to expand...
Click to collapse
- TOOLS AND FILES -
Universal Tools used Throughout the entire Guide:
-Odin Tool
-Samsung Drivers
ClockWorkMod Files:
-CWM_TU.tar
-TransformUltra.Ops
-tu_Root.zip
Current Custom Roms For the Transform Ultra:
-MegaTron Rom
-CTMod Rom
-Explosion Rom
-iDEV Rom
Stock Rom's, Recoveries and Kernels For both Boost And Sprint Transform Ultra's:
Roms:
-Stock Boost Rom
-Stock Sprint Rom
Recoveries:
-Stock Boost Recovery
-Stock Sprint Recovery
Kernels:
-Stock Boost Kernel
-Stock Sprint Kernel
Un-Root Files:
-TU_Boost_Unroot.zip
-TU_Sprint_Unroot.zip
Transform Ultra Complete Rooting and Modification Kit With Instructions:
-TU_Root_Mod_Kit.zip
Disclaimer said:
This guide is built to assist with developers and new users, in no way am i or any of the mentioned developers responsible for your device, follow the directs and nothing should go wrong
the information on this guide is set up to be corrected and edited frequintly so no links or files should be damaged, if any are please bring it to our attention and it will be resolved.
Click to expand...
Click to collapse
- ClockworkMod Recovery and Root -
Description said:
This section of the guide will walk you through Installing a Custom Recovery and Rooting your device.
Click to expand...
Click to collapse
Tools and Files you will need: (TU_Root.zip), (CWM_TU.tar), (Odin.exe)
1. Copy the file named (Tu_root) onto your SD card before we began.
2. Install samsung drivers if you don't have them already: (SAMSUNG_USB_Driver_for_Mobile_Phones_x86).
3. Open the Odin.exe in the folder : (Odin_Multi_Downloader_v4.42), [Run as administrator].
4. Hit the "OPS" button and select the TransformUltra.ops file from the folder (TransformUltra.ops).
5. Select the "One Package" Button and select the CWM_TU.tar from the folder (CWM_TU.tar).
6. Now put your phone into download mode (Vol down + camera + power).
7. Plugin your phone and the yellow COM should light up in the upper left.
(make sure your phones back is removed for quick access to the batter for the following steps!!)
8. As soon as you hit start, remove the battery from the phone.
9. Wait until Odin finishes and shuts off the phone. Pull the battery and take it off the usb so it doesn't reboot.
10. Put the battery back in the phone and boot strait into recovery (by Pressing and holding down the:
(Volume Down + power Button) at the same time.
11. Once in Recovery select "install zip from sdcard".
(note use the volume keys to go up and down the list and the power button to slect the option!)
12. Select "choose zip from sdcard"
13. Locate(tu_root.zip) from where you saved it on youe sd card.
14. Select "yes"
15. Once complete Navigate to where it says "Reboot Device" and Select it.
16. Once booted Install Something from The Google Play store (Install Superuser and update su and busybox).
(if you wish to Un-Root your Device Follow steps 12-16 but instead of installing (tu_root.zip), Install (tu_boost_unroot) or (tu_Sprint_unroot) depending on your carrier.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Congratz!!! your Transform Ultra is Now Rooted and can Install Custom Roms!
- FINDING AND INSTALLING CUSTOM ROMS -
Description said:
This Section Will teach you how to Install Custom Roms onto your Device.
Click to expand...
Click to collapse
1. Put the Rom you want onto your SD CARD!
Here's a list of Roms for the Transform Ultra
-MegaTron Rom
-CTMod Rom
-Explosion Rom
-iDEV Rom
2. Boot into Recovery.
3. Clear Dalvik Cache(in advanced).
4. Clear Cache.
5. select "install zip from sdcard".
6. Select "zip from sdcard".
7. Locate the Rom you wish to install onto your Transform ultra and Select it.
8. Let the Recovery Do its Thing and Reboot your device
Your Done! enjoy your new Rom!:rock:
(note: ONLY INSTALL ROMS THAT YOU KNOW IS BUILT FOR YOUR DEVICE!)
- Re-Installing the Stock Rom and Recovery -
Description said:
This section of the guide will walk you through Re-Installing the Stock Recovery and Rom onto your device for both BOOST and Sprint.
Click to expand...
Click to collapse
1. Install(if you havn't) Odin and start it up (in administrator mode).
2. put your device into Download Mode (volume down + camera + power buttons) at the same time.
3. plug your Usb cord from your computer Into your phone you will see a yellow box with (COM) light up, thats your phone.
4. Click OPS and select the file (TransformUltra.ops).
5. For either version (Boost / Sprint ) Find the Option called (One Package) you will be using that from now on.
6. Using "One Package" select The corasponding Stock Rom you Downloaded. (and click start).
7. Once Odin is finished, repeat the previous Steps for The (Tu_(carrier name)_stock_recovery.Tar
your phone is now Back to Stock.
:beerglass:CREDIT AND SUPPORT!:beerglass:
Description said:
This section is to present everyone who made this thread AND these roms and tools possible! so say thank you!
Click to expand...
Click to collapse
1. Chevanlol360
2. Loota
3. Bloodawn
4. mavrikmeercat
5. Slayer72
6. jdogrambo
7. ibrickphones
8. bads3ctor
9. NGD1
GO SAY THANK YOU FOR THIS AWESOMENESS!!!!!!
Youcan Find us all Mainly at www.Phandroid.com!
is there any chance this will work on samsung galaxy chat gt-b5330 ? with ics 4.0.4 ? .... i`m afraid im gonna brick it ...
if you use the right files you'll be fine
_tu_root is no longer available from the provided link. Does anyone have a mirror?
2 months later and tu_root is still down, and just moments ago the "complete kit" disappeared.
---------- Post added at 05:05 PM ---------- Previous post was at 05:01 PM ----------
Working link to tu_root: https://dl.dropbox.com/u/84283344/tu_root_.zip
Most of the links are now broken since the Dropbox reset too.
I've been trying to find the root files for this phone everywhere and all the links are just broken. I just wanna root it to remove the boost bloatware and boot animation so I can use it as an emulator for old games but no luck finding any of the files.
Hey NGD1
I was curious If you still have the Transform Ultra Tu_root.zip file
if not its totally cool I was just curious if it is still out there somewhere in the world
I spent like 4 hours searching for it to no avail
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
site LEWA OS, the official website of the team http://lewarom.weebly.com/
Personal LEWA am providing the new OS, it is not really new, it's just a great job of consumption several hours many lines of code translation time Chinese, Russian and Spanish that is now fully translated into English in Brazilian Portuguese
Let's new in this version
Based on aroma instaler
Translated to our Portuguese BRAZIL, screens and themes for visual customizations must
Many menus completely rewritten and other readapted
Menus and themes to choose from, if you still want more you can download themes within the category of online
Menus in Portuguese Brazil will hardly curl up with some option
Fantastic option of recording your links separated by numbers
Sms customized for any event, I'm sure something will be interesting
Set the Improved drivers in every way, WIFI, GPS, AUDIO,
Awesome v5 build in the Ac! DEngine v8
Mtk6577 switch Governor - Control the speed of your processor to save battery or performance
GPStest - test your GPS is working right
Programs (fillet) updated, follows some
- Home of facebook,
- Separate Programs for the aroma according to the user's needs fully updated also
- Has everything an average user needs, I believe is to surprise, all handpicked
Many applications have patterns in my customizations
Now with Google engine update
QuickOffice
Applications GAPPS - Google apps (gmail, maps, browser, Chrome, etc.)
Apps for managing files and settings all updated on 01/06/2013
And speaking of choice, has changed some features of the app lewa to accept the play,
but still is not accepting some have built great surprise, the free Market,
fully updated and still want to play anyway do not worry we have MarketHelp with a few questions that will already be downloading anything.
Fun games and a must for everyone
Well folks follow the link http://www.4shared.com/zip/9GVOEUvX/LewaX810D.html
Our version slim 189MB - http://www.4shared.com/zip/5tPDuk7U/LEWAX810D_MINI.html
Thanks
XDA Forum where many tips were taken from there to feed this ROM
http://forum.china-iphone.ru - user kupyxa4444, which extracts the original rom in Chinese and Russian to perform the work of translation
Optional for LEWAOS
Themes Pack for Lewa [/ color] http://www.4shared.com/zip/cjtVu3gc/temas_para_LEWA_OS.html find the SD Card folder LEWA and within themes copy all the content there is more than 50 themes to choose
Test and pass me the feedback, doubts the willingness
WARNING
Only install with clockworkmod recovery or boot TRWP
to avoid errors "signature verification failed" only with clockworkmod or TRWP up and running
Installation LEWA TRWP
Have root installed on the device and download the mobileuncle, extract recovery.img oo http://www.4shared.com/zip/_Bpv2dDi/Lewa_Recovery.html put this zip on the root of the SD card and go into the recovery menu select mobileuncle recovery indicated in the program and wait for reboot into the new recovery
In case of the clockrecoverymod and just want to change the zip recovery place full load on the card and the recovery of clockrecovery install pointing the way
clockworkmod the installation procedure. [/ B]
New - This link falcaobr can help a lot http://www.hiphonebrazil.com/viewtopic.php?f=25&t=1676
download drivers and recovery specific to the model of X810D https://docs.google.com/file/d/0BzBKBMr8_dDSckx0UE52aUs2bGc/edit?usp=sharing
1. Extract the file 'Android flash.rar' anywhere on your desktop. Will create the folder "Android Flash".
2. Go to the folder "Android Flash", then the folder 'USB VCOM Driver' and search for the file. "Inf" which is related to your operating system (windows xp or windows 7) and copy it in the work area windows.
3. Remove the battery from your phone but have to take it and connect your phone to your computer with the button "volume up" button.
4. Go to Device Manager windows. Your phone should already have appeared and windows should be trying to install a driver for it.
Right Right-click on your phone and click "Update Driver", then look
file manually. Inf file that you chose in step 2.
After your phone is recognized disconnect it from the computer.
5. Go to the folder 'Android flash' run the file "Flash_tool.exe" and select all files so that it is as shown below:
6. Clicking "Download" (a message will appear, but you click "yes" and continues the process), then connect the phone to the computer with the button "volume up" button. (I let him down throughout the process)
It will record everything on the system, then all done will pop up a window with "Ok", and a green circle.
7. CWM was installed in aparelho.Desconecte the device from the computer and then you can perform the procedure of installing the ROM
Install the rom put the sd and create a folder recovery and put the rom download there, then unplug it and plug pressing volume + release the power button after 15 seconds will display the screen clockworkmod in first to clean cache and wait for it delete user data that is important for compatibility, then please install zip from sd and choose to with the volume + or - the folder where the rom download and then press the power button to select, confirm the installation and wait after 3-5 minutes rom is installed and return to the main menu of a back and reboot and it voia new rom on your X710D.
So does this ROM not have English language?
alps x810d
Please, anyone know if the "alps x810d" has exactly the same hardware of haipai x710d?
I have a 5.3" x810d with LCD screen partially damaged and would like to by a new one, but I did not find anything about this model on ebay or aliexpress.
Thanks.
This Guide will teach you how to increase the Internal Memory of QMobile Noir A2 phone.
Things you will need:
1. QMobile Noir A2 (must be rooted)
2. A CWM or TWRP recovery flashed in your phone
3. A Micro SD-Card (size 2 GB or more, recommended at least 4 GB)
4. 40int2ext script file (download from 4shared)
MAKE A NANDROID (CWM OR TWRP RECOVERY) BACKUP BEFORE DOING ANYTHING!
I WILL NOT BE RESPONSIBLE FOR ANY LOSS OR DAMAGE.
DO NOTE THAT YOU ARE FOLLOWING THIS GUIDE AT YOUR OWN RISK.
If you are going to use the Stock QMobile ROM then follow this whole guide.
If you are going to use a custom ROM with Init.d support then skip the Steps 5 and 6.
If you want to use the Stock ROM then you will need an unedited version of the Stock ROM with only Root done in it.
Restore a backup of Stock ROM, factory reset it, flash superuser in it and then proceed below.
1. Make a second partition on your SD-Card of "ext3" file format and label "sd-ext".
Instructions on how to do are in this thread:
http://forum.xda-developers.com/showthread.php?t=2475274
2. Download and install these applications:
-BusyBox Free
-File Manager (Any with Root capabilities)
-Link2SD
-Pimp My Rom (ALPHA OVER)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Run "Link2SD" and mount the second partition as "ext3" as shown in the screenshot below:
If it gives an error then your second partition is not properly formatted. Go Back to the Step 1.
If it works properly then you will see this dialogue. Now click on "Reboot device" and your phone will restart:
4. Now open your file manager, give the proper Root permissions and then browse to the folder "/data/sdext2/"
If this folder is empty then go to Step 5.
If this folder contains any files or folders such as these:
Then delete them all:
This folder should be clean now:
If one or two files or folders give error and are not deleted then no worry, just ignore them.
5. Run "BusyBox Free" application and install BusyBox through the normal way, no need to use the Smart Install feature.
6. Run "Pimp My Rom" application:
Go to the "Tools" menu and scroll down to the "Universal Init.d Support" option and open it:
Click on Activate:
A diaglogue will popup, click on "Yes, Reboot !":
You phone will then Reboot. After it has started up, run Pimp My Rom again and go to "Tools" > "Universal Init.d Support" and this time click on "Verify"
You should see a message saying "SUCCESS ! You have init.d support !":
7. Next Open up your file manager with Root pernissions, go to "/system/etc/init.d/" and paste the "40int2ext" file here:
Long press on this file, from the popup menu select permissions and give this file all the Read, Write and Execute permissions:
8. Now turn off your phone and boot into the recovery. From the advanced options format the "data" and "cache" partitions.
9. Reboot your phone. It will take much longer than usual to start up for the first time. After it boots up you will see that your phone has been reset and now your Internal Memory has been increased.
You can check this by going into "Settings" > "Applications" > "Manage applications", it should be now like the screenshot below:
Regards,
RaHBeR
http://www.facebook.com/RahberLeader/
Can you make same tutorial for A900 please
Zahid Ali said:
Can you make same tutorial for A900 please
Click to expand...
Click to collapse
Sorry I don't have a A900 phone, so cannot test it on it and make a tutorial for it.
You can try this method on your A900, maybe it will work. Make a backup before trying this and also it will be at your own risk because there is no guarantee that if in case your phone bricks, the backup will be able to fix it.
Regards,
RaHBeR
IMPORTANT
RaHBeR said:
This Guide will teach you how to increase the Internal Memory of QMobile Noir A2 phone.
Things you will need:
1. QMobile Noir A2 (must be rooted)
2. A CWM or TWRP recovery flashed in your phone
3. A Micro SD-Card (size 2 GB or more, recommended at least 4 GB)
4. 40int2ext script file (download from 4shared)
MAKE A NANDROID (CWM OR TWRP RECOVERY) BACKUP BEFORE DOING ANYTHING!
I WILL NOT BE RESPONSIBLE FOR ANY LOSS OR DAMAGE.
DO NOTE THAT YOU ARE FOLLOWING THIS GUIDE AT YOUR OWN RISK.
If you are going to use the Stock QMobile ROM then follow this whole guide.
If you are going to use a custom ROM with Init.d support then skip the Steps 5 and 6.
If you want to use the Stock ROM then you will need an unedited version of the Stock ROM with only Root done in it.
Restore a backup of Stock ROM, factory reset it, flash superuser in it and then proceed below.
1. Make a second partition on your SD-Card of "ext3" file format and label "sd-ext".
Instructions on how to do are in this thread:
http://forum.xda-developers.com/showthread.php?t=2475274
2. Download and install these applications:
-BusyBox Free
-File Manager (Any with Root capabilities)
-Link2SD
-Pimp My Rom (ALPHA OVER)
3. Run "Link2SD" and mount the second partition as "ext3" as shown in the screenshot below:
If it gives an error then your second partition is not properly formatted. Go Back to the Step 1.
If it works properly then you will see this dialogue. Now click on "Reboot device" and your phone will restart:
4. Now open your file manager, give the proper Root permissions and then browse to the folder "/data/sdext2/"
If this folder is empty then go to Step 5.
If this folder contains any files or folders such as these:
Then delete them all:
This folder should be clean now:
If one or two files or folders give error and are not deleted then no worry, just ignore them.
5. Run "BusyBox Free" application and install BusyBox through the normal way, no need to use the Smart Install feature.
6. Run "Pimp My Rom" application:
Go to the "Tools" menu and scroll down to the "Universal Init.d Support" option and open it:
Click on Activate:
A diaglogue will popup, click on "Yes, Reboot !":
You phone will then Reboot. After it has started up, run Pimp My Rom again and go to "Tools" > "Universal Init.d Support" and this time click on "Verify"
You should see a message saying "SUCCESS ! You have init.d support !":
7. Next Open up your file manager with Root pernissions, go to "/system/etc/init.d/" and paste the "40int2ext" file here:
Long press on this file, from the popup menu select permissions and give this file all the Read, Write and Execute permissions:
8. Now turn off your phone and boot into the recovery. From the advanced options format the "data" and "cache" partitions.
9. Reboot your phone. It will take much longer than usual to start up for the first time. After it boots up you will see that your phone has been reset and now your Internal Memory has been increased.
You can check this by going into "Settings" > "Applications" > "Manage applications", it should be now like the screenshot below:
Regards,
RaHBeR
http://www.facebook.com/RahberLeader/
Click to expand...
Click to collapse
CAN YOU PLEASE MAKE SUCH A SCRIPT FOR CM 11 nightly KITKAT 4.4.2....please
How to use GeoWhere to control your location in Pokémon go with an analogue stick (joystick) on android.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE NOTE: FOR LOLIPOP 5.0.1 YOU WILL NEED TO FLASH A DEODEXED ROM IN ORDER TO USE EXPOSED FRAMEWORK, PLEASE SEE BOTTOM FOR INSTRUCTIONS.
I DO NOT TAKE RESPONSIBILITY FOR LOSS OF WARRANTY OR DAMAGE TO ANY DEVICES AS A RESULT OF FOLLOWING THIS TUTORIAL.
QUICK GUIDE (For experienced users)
1. Root Your Device
2. Install Exposed Framework for your device
a. http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960 (For Samsung devices)
3. Install “Hide My Location” http://dl-xda.xposed.info/modules/com.github.marlowww.hidemocklocation_v4_d70206.apk
4. Activate “Hide My Location” module in “Exposed Installer”
5. Reboot and black list “Pokemon Go”
6. Install GeoWhere and start playing
a. https://play.google.com/store/apps/details?id=za.co.epicdev.geowhere
7. Remember to allow “Draw over other apps” for devices with lollipop and above
8. Enable “allow mock locations” in developer options
INDEPTH GUIDE (Need help Rooting Device)1. Download Odin 3.09 and a “Recover Image” (SOME DEVICES MIGHT NOT SUPPORT ODIN, READ TWRP INSTALL INSTRUCTIONS)
2. Find the correct recovery for your device (device model) https://twrp.me/Devices/
3. Put device into download mode (on Samsung devices you will hold VOLUME-DOWN + HOME + POWER BUTTON). You can google “how to put device model into recovery mode” for your device
4. Unzip Odin and double click the Odin3 v3.09.exe to start Odin and you should see a screen like below.
5. Connect your device to the PC and let Odin detect it. Once Odin detects the device the section that says ID:COM will light up blue
6. Click the AP button and then choose the recovery image file that you downloaded. It will have an extension of .img.tar
7. Once the file is loaded, click start
If you get a message saying that the install failed because of FRP lock then enable Allow OEM unlock in developer settings
8. Most devices will reinstate the original recovery on start up so as soon as the device reboots press VOLUME-UP + HOME + POWER to boot into the recovery (some devices may vary - check for your device)
9. (OPTIONAL BUT SUGGESTED) Once you have successfully booted into the recovery, I suggest you perform a backup of your device by touching backups and sliding the bar across to start the process. (If you are unsure, google “team win backing up device”)
If your device gets stuck in a boot loop boot back into TWRP and install SuperSu as instructed bellow and it will fix it self
10. Reboot your device
11. You will now need to root your device. You can google the best method for your specific device, this method will work on most devices including Marshmallow devices.
12. Download “SuperSu” from http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 and copy the file to your device
13. Shut your device down and boot back into the recovery again with VOLUME-UP + HOME + POWER or whichever method is supported for your device.
14. Touch install and then look for the file you just copied and select it. Swipe to start installation
15. Clear “Dalvik Cache” and then reboot your device
16. Download Xposed framework for your device (check if your device is 64bit or not)
i. Marshmallow (Samsung devices Note4) ARM https://www.androidfilehost.com/?fid=24572330218881465
ii. Marshmallow (Samsung ARM64bit devices Note 5, Galaxy s7) https://www.androidfilehost.com/?fid=24572330218881466
iii. Lolopop 5.1 https://www.androidfilehost.com/?fid=24566454284190899
iv. KitKat only requires the framework manager apk and doesn’t need flashing http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v33_36570c.apk
17 Only if you are above kitkat 4.4: Copy the downloaded file to your device and install it with the recovery the same way you did with the SuperSu file. ( For kitkat 4.4 install the Xposed Insataller in let it install for you by opening the app)
18. Clear “Dalvik Cache” and then reboot your device
19. Download the following app to your device http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
20. Install the app
21. Download “Hide mock Location” http://dl-xda.xposed.info/modules/com.github.marlowww.hidemocklocation_v4_d70206.apk
22. Install “Hide Mock Location”
23. Open Xposed Installer and select modules.
24. Enable “Hide Mock Location”
25. Reboot device
26. Open Hide Mock Location app and blacklist Pokemon Go
27. Now you can install GeoWhere and start using the app to spoof your location in Pokemon Go https://play.google.com/store/apps/details?id=za.co.epicdev.geowhere
aa. Remember to allow “Draw over other apps” for devices with lollipop and above
bb. Enable “allow mock locations” in developer options
For Lolipop 5.0.1 Users
You will need to flash a Deodexed rom in order to use Exposed Framework. You need to find a Deodexed or custom rom for your specific device. XDA (http://forum.xda-developers.com/) is a good place to look. For my galaxy S4 I used a cyanogenmod Custom rom which worked fine but some people might not want a custom rom and therefore require a Deodexed rom.
For those of you who want to install cyanogenmod on a galaxy s4 i9500. Use the following link and then flash the file using the recovery method described above https://download.cyanogenmod.org/get/jenkins/169278/cm-12.1-20160710-NIGHTLY-i9500-recovery.img
You can then flash the required Exposed framework for your device for SDK 22
http://dl-xda.xposed.info/framework/sdk22/
Thanks, I followed the steps and it works really well
Great App!
Thanks, I got it to work. It was tricky with my Huawei because I couldn't get Odin to work on it.
Why does "Allow mock locations" option uncheck as soon as I leave the Developer Optio
Why does "Allow mock locations" option uncheck as soon as I leave the Developer Option tab?
Hi, this happens if you have hide mock location set to whitelist mode and have not specified the correct application to whitelist. Rather use black list mode and only check Pokemon go as shown in the screen shot. Also check to see if the hide mock location module has an update.
Rural areas
This app works really well for people in rural areas that would like to play Pokemon Go. I did have a slight problem when trying to root my mobile but it all worked out in the end. :good: Thank you! I recommend this app. Just follow the instructions carefully.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am proud to present first Dualboot project For Cagabi one. This will allow any number of ROMs to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (like /data/multiboot). Because of the way this is implemented, no changes to the primary ROM are necessary
What is DualBootPatcher?
DualBootPatcher is an open-source app that allows multiple ROMs to be installed on a single Android device. It does its best to work with existing code and does not require explicit support from ROMs. There are currently 200+ supported devices and their variations.
Information:
I have managed to support for Cagabi one and other MT6580 devices to the DualBootPatcher App, I am not the developer, I am just the maintainer.
It's awesome and useful for testing out roms or if you want, switching ROMS.
Disclaimer:
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Requirements:
1. A Custom Recovery (TWRP)
2. A ROM
3. Dual Boot Patcher app from the download section below.
What does the app do ?:
It patches...
Custom kernels for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
What's supported ?
How to use the App?
- Download, install and open the app.
- Swipe to the right to open the menu. Click "ROMS". Now if this is the first time you use it, it will ask you if you want to set kernel. Do so!
- After it has finished go to ROM Settings (primary ROM 3 dot menu) and select Update Ramdisk. It will update it and will ask you to reboot. Press Reboot Now, or Reboot later.
- Now Download any ROM you like and open the app again and open the menu and open Patch Zip File from the menu. Ensure that your Device is set correctly and under Partition configuration select secondary (will install 2nd ROM in /system) or data or external SDCard slot.
- Click continue and select where to save the patched file.
- You should see the file is being put in "Queue". Just click the confirm button to the upper right.
Note: If you want to go back, just swipe the ROM in queue to right and start over.
- The app will patch the zip. When done, go back to "ROMs".
- Click "Flash zip files" (the big pink button on the lower right). Click the pink plus button to add your previously patched zip file.
- Locate the file you have patched in step 7. Unless you have changed the name there, it should be something like ROM_name_partition_config_ID.zip (like LO13-20170807-cagabi-Unofficial_dual.zip).
- Click on that file and choose "Keep location". Now confirm the flash with the button on the upper right side.
Note: You can also install the patched zip files in recovery.
- It will now open the terminal and begin flashing the file. This requires some patience. After it has flashed the file you'll see success message in green.
- Now click back and you should see your newly installed ROM along with the Primary ROM.
Note: You can find more options by clicking on the three buttons on each ROM.
- Now reboot and wait till finishing 2nd ROM first boot. install DualBootPatcher apk so you can easily switch ROMs, there is another way to change ROMs: flash DualBootUtilities.zip and switch ROM manually.
Note: Using Bootui:
- Open app then select settings and press install (update) bootui. then Swipe to the right to open the menu. Click "ROMS" again and open secondary ROM Settings) and select Update Ramdisk, Now you can change ROMs simply using boot ui (something like grub bootloader but it works like twrp)
Partitions Configurations:
The patcher offers several locations for installing ROMs:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
How to boot to another ROM ?
This is simple ... There is no reboot to primary, secondary or whatever. So all you have to do is:
1) Go to ROMs section of the App.
2) Click on the ROM you want to boot to. You should see "Switching ROM" message. After few seconds, you should see a report message saying that "ROM successfully switched".
3) Now just do a normal reboot of your device. See the magic! It should boot to the ROM you have switched on step 2.
Note: You can find more options by selecting the three buttons on each ROMs (like creating reboot widgets for directly rebooting to specific rom).
You also need to install the App to all of the ROMs you install. Otherwise, you want be able to boot to other ROMs!
Apps and Data sharing:
To use app sharing, follow these steps in every ROM that you want to use app sharing: (doesn't work with JB ROMs)
Install the app you want to share
Open DualBootPatcher and go to "App Sharing" in the navigation drawer
Enable individual app sharing
Tap "Manage shared applications" and enable APK/data sharing for the app
Reboot
Other How to ?
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Source:
Source
All Releases:
Releases
Downloads:
07-Aug-2017 first release
Credits:
@chenxiaolong for the awesome DualBootPatcher.
@RendyAK for inspiration, help and tips
@yshalsager I copied his thread because I am too lazy
Enjoy