Related
I have cm9 and want to go back to stock type roms.. less bugs..
anyway, how do I do this? I did a full wipe and restored hydro but the kernel stays on CM9 kernel.. and wifi wont turn on...
You need to flash the actual .30 zip from asus. That returns you to stock. Then do a custom recovery/root and THEN flash hydro.
thatisandwas said:
You need to flash the actual .30 zip from asus. That returns you to stock. Then do a custom recovery/root and THEN flash hydro.
Click to expand...
Click to collapse
Wow, that sucks..... thanks for the help tho. Think I'll just stick to cm9. I got it working well and its fast.
try hydro. Izs based on stock and is one of the fastest roms out there.
hdjoe said:
Wow, that sucks..... thanks for the help tho. Think I'll just stick to cm9. I got it working well and its fast.
Click to expand...
Click to collapse
Which recovery do you have? Flash the latest twrp recovery and you can flash hydro without the need to return to stock. Simply download the newest base for hydro. You can also flash clean rom over cm9 without returning to stock. Make sure that you wipe cache, dalvic, factory data reset, and format system.
dxwilliams40 said:
Which recovery do you have? Flash the latest twrp recovery and you can flash hydro without the need to return to stock. Simply download the newest base for hydro. You can also flash clean rom over cm9 without returning to stock. Make sure that you wipe cache, dalvic, factory data reset, and format system.
Click to expand...
Click to collapse
I'm on cwm. Still. Formatting system won't wipe everything off my internal memory will it? I have about 15 movies , and a bunch of snes games....
Hi guys. Al thou this is my first post I've been flashing my i9003 for a year or so and i've never had any problems until now.
I have an stock gingerbread installed (XXKPQ) that I flashed using odin, kernel version (2.6.35.7-CL709629 [email protected] #1)
Just so you know, I'm from Argentina, and in order to be able to use 3g, had to keep the modem in I9003LUBKB1 version.
I also flashed cf root (by Skin1980) and I'm using CWM v1.80
I get the latest jellybam (1.3) from this post: http://forum.xda-developers.com/showthread.php?t=1972087
And followed the instructions in the official website : http://www.igio90.net/how-to-install/
Just in case you're too lazy to follow the link here are the instructions:
What to do if you are coming from a Stock, CyanogenMod, MIUI, AOKP and any other custom ROM different from JellyBam
-Download the latest revision of JellyBam ROM for your device
-Place the zip into your internal SDCard
-Boot into CWM recovery (Home+Power+Volume up until samsung logo appear)
-Wipe data/factory reset
-Wipe dalvik cache (Inside advanced tab)
-Install zip from internal SDCard
-Welcome to JellyBam!
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
The first time I run the installer it got stuck at 50% while installing sony's media player. So i just started the process again and uncheked sony walkman player, it installed "successfully".
When the phone restarted, it was just the old gingerbread, in the about phone panel, it was all the same that before installing jellybam.
So it obviously didn't installed. I can make calls, send and receive messages, wifi is working fine.
So can anyone tell me what am I doing wrong? Do i have to flash a jellybean kernel?, I dont really know hoe to do that but I'm sure there's more than one post around here that explains that process.
If this question has already been posted I'm really sorry, I did search for any post that could help me with this problem but I didn't find any real answer.
I really hope somebody can help me, and sorry for the bad english, I did study the language but it was a long time ago.
Thanks everybody, specially to developers, you're awesome.:good:
I think you should fist flash theJellyBam v1.1.0 alpha4 in order to repartition before flash the v1.3. hope it can help u.
Sent from my GT-I9003 using xda app-developers app
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
flashing 1.1 first worked great.
I'm having issues thou, don't know if this are known bugs or just happens to me.
I can't get any signal, gonna try flashing this:
http://forum.xda-developers.com/showthread.php?t=2029921&highlight=cm10+signal+fix
And seems like the phone can't detect when it's plugged to a usb port
narshade said:
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
Click to expand...
Click to collapse
Wiping the data does not affect your Internal/External storage.
chongns said:
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
jawadlotfi said:
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
Click to expand...
Click to collapse
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
imboy25 said:
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
jawadlotfi said:
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
Click to expand...
Click to collapse
Good luck! i hope you flash it correctly! just read and follow the instructions in the cm10 thread thoroughly so you can avoid any problems.
All custom rom unofficial, not compile, but directly modify our base cyanogen
It is recommended to start on a CM10 origin
Example A3 to A4
KPE> LF2> CF-LF2
Wipe Data / Factory Reset. (MUST DO THIS STEP)
Select the CM10 A4.zip from your SD Card and flash.
Auto rebooted into recovery (if it show error mounting / cache, and cant mount in manually mount and storage, do wipe / cache)
Go to Advanced -> Reboot Recovery
Select the CM10 A4.zip from your SD Card and flash again
Go to Advanced -> Reboot Recovery.
Mounts and Storage -> Format dbdata (you would not find this in CWM so just ignor 6)
8. reboot
You can then flash all based on Unofficial Alpha 4
Just do the basic procedure wipe
I have been attempting to flash Jelly bean on my samsung galaxy s2 skyrocket (SGH I727) I am rooted, have previously flashed ICS. Seems that every JB ROM that I attempt get stuck in a "boot loop" I've tried ,,slim bean, liquid smooth, miui,,,,,,,All seems well and seems to run it's course, but after "reboot,,,,,,nothing. ANY TIPS?
rockironwebb said:
I have been attempting to flash Jelly bean on my samsung galaxy s2 skyrocket (SGH I727) I am rooted, have previously flashed ICS. Seems that every JB ROM that I attempt get stuck in a "boot loop" I've tried ,,slim bean, liquid smooth, miui,,,,,,,All seems well and seems to run it's course, but after "reboot,,,,,,nothing. ANY TIPS?
Click to expand...
Click to collapse
How are u flashing the ROMs? Not using Rom Manager are u?
Also making sure to fully wipe, right?
Batcom2
Make sure you are doing a correct wipe.
Factory/Data Reset, Cache, System, Dalvik Cache. Add rom zip & gapps... Flash and reboot.
Use newest version of TWRP.
Sent from my SGH-I747 using XDA Premium HD app
brandonarev said:
How are u flashing the ROMs? Not using Rom Manager are u?
Click to expand...
Click to collapse
CWM
Are you sure you did all these before attempting to flash JB?
Factory/Data Reset,
System,
Cache,
Dalvik Cache.
Add rom zip & Google Apps?
blackdivines said:
Are you sure you did all these before attempting to flash JB?
Factory/Data Reset,
System,
Cache,
Dalvik Cache.
Add rom zip & Google Apps?
Click to expand...
Click to collapse
I did all of the above as instructed. I was finally able to get miui to run past boot. I was hoping to get liquid smooth working. The miui process that I got to work first had me run something called Darkside wiper. On both slim bean and liquid, I followed all instruction to the letter. There was another ROM (Iforget the name) that I was able to get past the boot screen but I had absolutely no cell service.
rockironwebb said:
I did all of the above as instructed. I was finally able to get miui to run past boot. I was hoping to get liquid smooth working. The miui process that I got to work first had me run something called Darkside wiper. On both slim bean and liquid, I followed all instruction to the letter. There was another ROM (Iforget the name) that I was able to get past the boot screen but I had absolutely no cell service.
Click to expand...
Click to collapse
Now I am even more perplexed. I shut my phone off,,restarted and am now in a boot loop on the miui screen
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads section
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.
joel.maxuel said:
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.
Click to expand...
Click to collapse
man and how update with slimbean 4.2.2 I find the gapps please help me
SmokaHontas said:
man and how update with slimbean 4.2.2 I find the gapps please help me
Click to expand...
Click to collapse
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).
joel.maxuel said:
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).
Click to expand...
Click to collapse
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans
SmokaHontas said:
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans
Click to expand...
Click to collapse
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.
joel.maxuel said:
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.
Click to expand...
Click to collapse
yes man very thans for everything
are you just going to JB or are you thinking or going to KitKat?
..
SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
Look it up on the google if you are tire of looking through the forum.
You got to update the rom. there is even video tutorial that Ricky Ericson made if you don´t want to read.
I am a noob also in this but the video guide helps alot.
Have fun flashing!
I want to flash Cyanogenmod 11, but I'm currently running DN4 ROM on my Galaxy S3 (Int.) with arter97 kernel. Do I have to return to stock ROM and kernel before switching to Cyanogenmod?
Sawake said:
I want to flash Cyanogenmod 11, but I'm currently running DN4 ROM on my Galaxy S3 (Int.) with arter97 kernel. Do I have to return to stock ROM and kernel before switching to Cyanogenmod?
Click to expand...
Click to collapse
Not sure what DN4 ROM is. If it's KitKat, then just wipe /system, /data, and dalvik cache then fish your ROM's zip file.
If you are on Jelly Bean, then you will need a KitKat compatible recovery like PhilZ CWM Touch or TWRP, and probably an updated modem. zip file to flash first to your S3.
Then format system and data partitions and wipe dalvik cache, then flash CM11.
If on an older Android version like Ice Cream Sandwich, you might need to install a newer KK/JB recovery and radio, format system, data and dalvik, and flash CM10 Jelly Bean first, then follow the steps to flash CM11 KitKat.
Hope this helps. Good luck!
NoSpamDan said:
Not sure what DN4 ROM is. If it's KitKat, then just wipe /system, /data, and dalvik cache then fish your ROM's zip file.
If you are on Jelly Bean, then you will need a KitKat compatible recovery like PhilZ CWM Touch or TWRP, and probably an updated modem. zip file to flash first to your S3.
Then format system and data partitions and wipe dalvik cache, then flash CM11.
If on an older Android version like Ice Cream Sandwich, you might need to install a newer KK/JB recovery and radio, format system, data and dalvik, and flash CM10 Jelly Bean first, then follow the steps to flash CM11 KitKat.
Hope this helps. Good luck!
Click to expand...
Click to collapse
DN4 is basically a port of the Note 4 ROM (which is KK) for the Galaxy S3. I really appreciate your help, but my my problem is the kernel, because now I have arter97's kernel, but I want to flash CM12 with JustArchi kernel in order to have better performance. On the latter kernel's thread I've read that it's strongly not recommended to flash it on another custom kernel (arter97 in this case), so I was thinking to go back to stock and then flash CM12 with JustArchi's kernel. Is this okay to go like this or there's a better way to do it? Thanks again for your help!
Sawake said:
DN4 is basically a port of the Note 4 ROM (which is KK) for the Galaxy S3. I really appreciate your help, but my my problem is the kernel, because now I have arter97's kernel, but I want to flash CM12 with JustArchi kernel in order to have better performance. On the latter kernel's thread I've read that it's strongly not recommended to flash it on another custom kernel (arter97 in this case), so I was thinking to go back to stock and then flash CM12 with JustArchi's kernel. Is this okay to go like this or there's a better way to do it? Thanks again for your help!
Click to expand...
Click to collapse
Just make a nandroid backup and try it. Make sure you format system and data partitions and wipe dalvik cache before flashing CM12.
You don't need to go stock first; if you have a custom recovery and the bootloader is unlocked, worst case is you restore your nandroid.
I suggest asking about this in the JustArchi thread too.
Sent from my OnePlus One BACON using Tapatalk
NoSpamDan said:
Just make a nandroid backup and try it. Make sure you format system and data partitions and wipe dalvik cache before flashing CM12.
You don't need to go stock first; if you have a custom recovery and the bootloader is unlocked, worst case is you restore your nandroid.
I suggest asking about this in the JustArchi thread too.
Sent from my OnePlus One BACON using Tapatalk
Click to expand...
Click to collapse
Okay! Thanks again for your help!
Sawake said:
Okay! Thanks again for your help!
Click to expand...
Click to collapse
You're welcome.
Sent from my OnePlus One BACON using Tapatalk