I have been attempting to flash Jelly bean on my samsung galaxy s2 skyrocket (SGH I727) I am rooted, have previously flashed ICS. Seems that every JB ROM that I attempt get stuck in a "boot loop" I've tried ,,slim bean, liquid smooth, miui,,,,,,,All seems well and seems to run it's course, but after "reboot,,,,,,nothing. ANY TIPS?
rockironwebb said:
I have been attempting to flash Jelly bean on my samsung galaxy s2 skyrocket (SGH I727) I am rooted, have previously flashed ICS. Seems that every JB ROM that I attempt get stuck in a "boot loop" I've tried ,,slim bean, liquid smooth, miui,,,,,,,All seems well and seems to run it's course, but after "reboot,,,,,,nothing. ANY TIPS?
Click to expand...
Click to collapse
How are u flashing the ROMs? Not using Rom Manager are u?
Also making sure to fully wipe, right?
Batcom2
Make sure you are doing a correct wipe.
Factory/Data Reset, Cache, System, Dalvik Cache. Add rom zip & gapps... Flash and reboot.
Use newest version of TWRP.
Sent from my SGH-I747 using XDA Premium HD app
brandonarev said:
How are u flashing the ROMs? Not using Rom Manager are u?
Click to expand...
Click to collapse
CWM
Are you sure you did all these before attempting to flash JB?
Factory/Data Reset,
System,
Cache,
Dalvik Cache.
Add rom zip & Google Apps?
blackdivines said:
Are you sure you did all these before attempting to flash JB?
Factory/Data Reset,
System,
Cache,
Dalvik Cache.
Add rom zip & Google Apps?
Click to expand...
Click to collapse
I did all of the above as instructed. I was finally able to get miui to run past boot. I was hoping to get liquid smooth working. The miui process that I got to work first had me run something called Darkside wiper. On both slim bean and liquid, I followed all instruction to the letter. There was another ROM (Iforget the name) that I was able to get past the boot screen but I had absolutely no cell service.
rockironwebb said:
I did all of the above as instructed. I was finally able to get miui to run past boot. I was hoping to get liquid smooth working. The miui process that I got to work first had me run something called Darkside wiper. On both slim bean and liquid, I followed all instruction to the letter. There was another ROM (Iforget the name) that I was able to get past the boot screen but I had absolutely no cell service.
Click to expand...
Click to collapse
Now I am even more perplexed. I shut my phone off,,restarted and am now in a boot loop on the miui screen
Related
I've tried installing Vicious-TORO-JellyBean-V3-signed and Vicious-TORO-JellyBean-V4-signed on my Verizon Galaxy Nexus. Both got stuck at the boot screen. I gave them 30 minutes, that didn't help. I wiped the cache and the Dalvik cache, that didn't help. Pulled the battery, no go. Tried the tuna-jb-kernel-019b6.zip kernel, no help. I've tried installing from ROM Manager and directly from recovery.
Is there a trick that I've missed? Are there Jelly Bean ROMs that are know to work on the Verizon GN?
bjrosen said:
I've tried installing Vicious-TORO-JellyBean-V3-signed and Vicious-TORO-JellyBean-V4-signed on my Verizon Galaxy Nexus. Both got stuck at the boot screen. I gave them 30 minutes, that didn't help. I wiped the cache and the Dalvik cache, that didn't help. Pulled the battery, no go. Tried the tuna-jb-kernel-019b6.zip kernel, no help. I've tried installing from ROM Manager and directly from recovery.
Is there a trick that I've missed? Are there Jelly Bean ROMs that are know to work on the Verizon GN?
Click to expand...
Click to collapse
I am running Vicious JB v3 on Faux kernel on VZW GNand have had no issues. I would recommend doing a full wipe, and then reinstalling. Do the full wipe, install Vicious JB v3, and then install the Faux Kernel for JB. I would stay away from Franco's Kernel.
Won't a full wipe destry the backup?
Won't a full wipe destroy the backup? If it still doesn't work I'd be screwed without the backup.
No A full Wipe is going to "Wipe Data/Factory reset"
It doesnt wipe your files, just the system files and your apps etc. So when you flash the rom and start it up, it is just like a new phone you have to sign into google and set everything back up
I also do not know about a V4, I am not sure where you found that at, but I havent seen it released yet.
I'll give that a try
V4 is available in ROM Manager.
Okay...So I'm having boot loop issues ever since I tried to flash Vincom's Superlite rom. Before attempting to switch to a different rom I had a a older version of CWM, not sure what it was....But I was under the impression I needed CWM touch to be able to use the Superlite rom. So I flashed sk8's CWM touch using a older CWM...With touch, I flashed the Dark Side Super Wipe 3x's and also did the wiped dalvek 3x's.....After all the wiping I flashed the superlite rom....my previous rom was CM10, by the way.....i got stuck in bootloop so I tried the darkside-wipe-cache, because that solved all my bootloop issues with the CM 9 and CM 10.......I tried to revert back to CM 10 via flash and got stuck in a boot loop....I tried multiple times to reflash and wipe with both superlite and CM 10...I couldnt get anything...So I gave up and flashed to stock firmware UCL6 via CWM Touch.....My phone is functional I just dont want this stock "rom"...I want to be able to use CM 10 again because the t-mobile radios dont work with the stock....Im thinking its the CWM....I tried using different kernels as well...and i still get a boot loop......
daygobaker said:
Okay...So I'm having boot loop issues ever since I tried to flash Vincom's Superlite rom. Before attempting to switch to a different rom I had a a older version of CWM, not sure what it was....But I was under the impression I needed CWM touch to be able to use the Superlite rom. So I flashed sk8's CWM touch using a older CWM...With touch, I flashed the Dark Side Super Wipe 3x's and also did the wiped dalvek 3x's.....After all the wiping I flashed the superlite rom....my previous rom was CM10, by the way.....i got stuck in bootloop so I tried the darkside-wipe-cache, because that solved all my bootloop issues with the CM 9 and CM 10.......I tried to revert back to CM 10 via flash and got stuck in a boot loop....I tried multiple times to reflash and wipe with both superlite and CM 10...I couldnt get anything...So I gave up and flashed to stock firmware UCL6 via CWM Touch.....My phone is functional I just dont want this stock "rom"...I want to be able to use CM 10 again because the t-mobile radios dont work with the stock....Im thinking its the CWM....I tried using different kernels as well...and i still get a boot loop......
Click to expand...
Click to collapse
Bump? Anybody?
Manually do the following wipes: wipe data/factory reset, cache, dalvik, format/data, format/system, format/cache all x3. Then reflash his ROM followed by gapps. Let it sit for 10 min as caches need time to settle and the initial boot always takes much longer.
Which version of cwm touch are you on?
------------------------------------------------
Sent from my Skyrocket i727 running AOKP JB
For a one stop shop are Vincom's threads
Everything Root: http://forum.xda-developers.com/showthread.php?t=1773659
Returning to Stock: http://forum.xda-developers.com/showthread.php?t=1652398[/QUOTE]
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
daygobaker said:
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
Click to expand...
Click to collapse
Clear cache clear dalvik cache flash radio if you has issues refresh Rom from scratch DO NOT REFLASH RADIO
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
daygobaker said:
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
Click to expand...
Click to collapse
Nope. Just wipe dalvik and cache and flash it. But it's likely to be an exercise in folly anyway, because it you have uclf5 and you flash uclf6, you still have the uclf5 libs. Changing the radio libs is a much more complicated procedure and without doing so you get limited benefit from flashing a new radio. But sometimes it does help anyway. Might be worth a try if you're getting poor connectivity.
daygobaker said:
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
Click to expand...
Click to collapse
No need to do a whole clean install simply to switch out the radio. I 95% positive you only need to wipe cache, dalvik, flash radio and reboot. I only changed radio once and it was during a clean install so I never really paid that close attention to the steps when you put it over the top of your ROM. Do what I said and you should be fine.
Or grab the torch and pitchfork. Jk there's nothing to worry about
------------------------------------------------
Sent from my Skyrocket i727 running AOKP JB
For a one stop shop are Vincom's threads
Everything Root: http://forum.xda-developers.com/showthread.php?t=1773659
Returning to Stock: http://forum.xda-developers.com/showthread.php?t=1652398
Still bootlooping...
Mike on XDA said:
Manually do the following wipes: wipe data/factory reset, cache, dalvik, format/data, format/system, format/cache all x3. Then reflash his ROM followed by gapps. Let it sit for 10 min as caches need time to settle and the initial boot always takes much longer.
Which version of cwm touch are you on?
Click to expand...
Click to collapse
Hey Mike,
I've been bootlooping as well. A little background...
I'm on CWM Touch 6.0.1.2 _sk8erwitskil_
I was on cm-10-20120812-EXPERIMENTAL-syyrocket-alpha3
Yesterday, I went to cm-10-20120912-UNOFFICIAL-skyrocket
I was ok until just a little bit ago I was on a call and the phone rebooted. Since then, bootloop-city.
I tried this procedure, reflashed 0912 and no joy. I think, at this point, the unreliability of CM10 (at this time) has worn thin (no dis to all the awesome developers out there) and I just want to go back to a stable CM9.
Any suggestions?
Thanks,
Bob
EDIT: Ya know, just when you think all is lost, there is Nandroid! I'm back to CM9 and no longer bootlooping!
Hi all,
i managed to flash my P6200, i've tried
CyanogenMod 10 by aorth (http://forum.xda-developers.com/showthread.php?t=1842090)
I'm using CWM v5 (and now 6), and now i'm stuck with the bootloop (boot unfinished restarted around 5 times or so then it successfully goes into cyanogenmod logo screen and stuck forever), i've tried to rewipe and install the mod and also redownload the mod, it doesn't work at all
i also looked at:
Paranoid Android v2.5 by Androguide.fr (http://forum.xda-developers.com/showthread.php?t=1941615) got the new download link but also stuck in bootloop
is there any available download links or so?
EDIT:
now i'm using CWM 6 and still got bootload any help?
I haven't tried to flash Cyano, but I know the only safe CWM should be 6.0.1.0
gabripranzo said:
I haven't tried to flash Cyano, but I know the only safe CWM should be 6.0.1.0
Click to expand...
Click to collapse
okay i gave then i'll try it with CWM 6
tried with CWM 6 and still not working... is there any advance setting that i'm missing?
Here's what i do:
1. Wipe data
2. Wipe cache
3. Wipe Dalvik Cache
4. install ROM
5. install Gapps
6. Reboot
There's mount and storage setting that i don't quite understand, is there something to do with it?
UPDATE: I Finally solved it...
I installed stock ICS from: http://forum.xda-developers.com/showthread.php?t=1777303&highlight=stock
with Odin (having bad luck with crashing / not detecting Heimdall :crying
It finally boot...!!! and i got ICS..!!! well, i don't stop, next:
Reinstall CWM 6, Backup, Wipe-wipe-wipe, install Paranoid Android v2.50 and Voila...!!!
it boot correctly... maybe i'll try cyanogen soon after updating this PA and done backing up...
Sorry for troubling and hopefully it helps others...
I have flashed both aorth's CM10 and PA, both work fine. However, aorth's CM10 is much better, battery life etc. Make sure to backup and do full wipes if switching between different ROMs. If just upgrading to new aorth CM10s or new PAs from previous versions, cache and dalvik wipes are all that's needed.
Sent from my GT-P6210 using Tapatalk 2
Hi, when we can update Galaxy tab 7.0 p6210 " to jelly bean 4.2 ?!
YES
MontyTheSpecial said:
Hi, when we can update Galaxy tab 7.0 p6210 " to jelly bean 4.2 ?!
Click to expand...
Click to collapse
YES...
to CM10
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!
elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.
Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
bweN diorD said:
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
Click to expand...
Click to collapse
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
ajh305 said:
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
Click to expand...
Click to collapse
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
bjoostema said:
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
Click to expand...
Click to collapse
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
EDIT: I tried another 4.3 rom and booted it up. Set some things up then updated su binaries and restarted and let it sit there at the unlocked bootloader warning for 15 minutes with no changes.
bweN diorD said:
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
Click to expand...
Click to collapse
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
ajh305 said:
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
Click to expand...
Click to collapse
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
bjoostema said:
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
Click to expand...
Click to collapse
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
ajh305 said:
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
bjoostema said:
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
Click to expand...
Click to collapse
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
ajh305 said:
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
Click to expand...
Click to collapse
Awesome man! I'm glad it booted up for you welcome to the 4.3 side!
ajh305 said:
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
Click to expand...
Click to collapse
glad you got it fixed but i have to ask, in the sequence above why are you restoring a backup? you should be going right from stock to 4.3. also, some people have issues with twrp and 4.3, thats why i suggested cwm.
I'm not sure why I restored the backup. I didn't think coming from stock would work for some reason.
Sent from my XT926 using xda app-developers app
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
sgtslaughter64 said:
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
Click to expand...
Click to collapse
This was the only thing that worked for me. You could maybe try updating to the most current recovery instead of the one listed.
the only 2 issues i have seen to cause this problem are covered in the post a few below, and fixed it every time. my only suggestion would be to install cwm after rooting, then reboot, then continue with the steps. just my preference, it may not matter.