Right then I'll expalne this first I use a nexus 7 charger to charge my a700 but it's not chargeing now it still works the charger on other devices so I thought the usb port had messed up so I tryed to plug my otg cable in and all the devices I've pluged in work (Xbox 360 pad memory sticks usb dongle) all work I am puzzed on why the charger doesn't work also my pc doesn't pick the tablet up any ideas would be helpful
Update its charging but still no connection to pc
Sent from my HTC One S using xda app-developers app
You need a special charger for the A700. There are two extra contacts to change the tab. This is due to the large battery.
Gesendet von meinem GT-I9000 mit Tapatalk 2
I understand that I'd love to know the pin layout of the normal charger I'd try to make my own but at least it charges from my nexus 7 charger but what am trying to figger out is why it won't connect to my pc via mirco usb
Sent from my HTC One S using xda app-developers app
I've decided to make my own charger the pin layout is pin 1 is 12volt+ and the pin 12 is 12 volt - I read that from another forum if this mod works I shall upload photos
Sent from my HTC One S using xda app-developers app
Related
Will the Desire HD car charger work for Inspire as well?
http://www.amazon.com/Car-Charger-for-HTC-Desire/dp/B003IX5HAO
Thanks
Consider they're basically identical phones yes, it will work. Just about any micro USB charger will work.
Thanks....
I bought this because of the extra USB port.
http://www.meritline.com/premium-11ft-micro-usb-car-charger-usb-port---p-64650.aspx
There is also this one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280633348582
A little off topic but similar,
So will any kind of micro usb work as a charger, am thinking of using my cable from my external hard drive as a charger for the phone when at work, so can just charge via my laptop
it shoyld work without a problem right?
Sent from my Inspire HD using XDA Premium App
Is there any way to charge and use otg at the same time
Sent from my HTC One X using Tapatalk 2
What is otg ?
On the go USB ie mounting a USB device to the Tablet
Sent from my HTC One X using Tapatalk 2
KrisPerry said:
On the go USB ie mounting a USB device to the Tablet
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Yes an NO lol. All depends what ROM you are using , what kernal is flashed and your device. You could "possibly" run a command via terminal but you wont have the function of both. It will be one or the other.
Sean_Seany said:
Yes an NO lol. All depends what ROM you are using , what kernal is flashed and your device. You could "possibly" run a command via terminal but you wont have the function of both. It will be one or the other.
Click to expand...
Click to collapse
I would like to mount a USB memory device simultaneously while charging. Are you saying this isn't possible
Sent from my HTC One X using Tapatalk 2
I think usb otg and charging in the same time is not possible as the two use the 30 pin connector, so you need accessory that is otg and has a socket to connect for charging in the same time, i have not seen this accessory yet
All otg cables i see has a socket only for usb stick and some has additional sockets for sd cards as the 5 in 1 accessory (i have one)
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
I think usb otg and charging in the same time is not possible as the two use the 30 pin connector, so you need accessory that is otg and has a socket to connect for charging in the same time, i have not seen this accessory yet
All otg cables i see has a socket only for usb stick and some has additional sockets for sd cards as the 5 in 1 accessory (i have one)
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
It would be useful as I would like to build a Tablet into my dasboard
Sent from my HTC One X using Tapatalk 2
Is it possible to connect an external USB HD and still charge the tab? (Tab 2 10.1)
I am fitting it in the car so will be constantly connected to car charger but also need the HD connected and ideally 1 or 2 spare USB ports (hub)
Can this be done?
Thanks,
Mark
Sent from my GT-N7100 using xda app-developers app
Yes should work with a double side usb cable
Be careful the Tab is drawing high current level by itself , you will need at least a 2amps car charger
http://78michel.unblog.fr/samsung-galaxy-tab-2-10-1-tests/
Ok, cheers for the reply...
Hard drive will have its own power supply and I'll use official Samsung car charger for tab...
Sent from my GT-N7100 using xda app-developers app
What Usb OTG cable do you use? Also is there a cable that can both charge and use usb otg?
Sent from my HTC One S using xda premium
mikennite said:
What Usb OTG cable do you use? Also is there a cable that can both charge and use usb otg?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
the one I have doesn't charge-- even when using a male-to-male USB cable. But it does work with OTG
dr_rick13 said:
the one I have doesn't charge-- even when using a male-to-male USB cable. But it does work with OTG
Click to expand...
Click to collapse
Can I use a cheap otg cable, or are the expensive ones better?
Sent from my HTC One S using xda premium
mikennite said:
Can I use a cheap otg cable, or are the expensive ones better?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Cheap cables are just fine.
Also, it's impossible for the phone to charge while using OTG. For OTG to work some of the pins are used for handling data and therefore cannot be used to charge.
I ordered one from china, took about 3 to 4 weeks, then I ordered from ebay..
they work fine... they only work with jellybean....
dc211 said:
Cheap cables are just fine.
Also, it's impossible for the phone to charge while using OTG. For OTG to work some of the pins are used for handling data and therefore cannot be used to charge.
Click to expand...
Click to collapse
Actually, the thing that prevents charging isn't the pins, it is a software toggle that turns the phone's port into a power supply for the external device, the charging circuit is switched off in the pm chip. There are charging/power usb otg host cables available for phones that support it, e.g., Nexus 7, with patched CM10.1, and the phone can get charged while usb hosting.
the 4 pins are still 2 data, two power, in otg mode.
I don't know if a software fix would work for captivate. I've got the datasheet for the cappy power management chip somewhere. if I can find it, I'll report if the chip can support it and if so, then maybe the N7 fix could get ported to cappy.
Sent from my SGH-I897
AW: USB OTG Cable
I use a 0,70€ cable... I don't recommend it, the connection between phone and usbstick interrupts too often.
Gesendet von meinem Nexus 7 mit Tapatalk 2
Yea. It's a bit of a gamble when buying cheap cables. I also bought a really cheap usb otg cable from dealextreme and the connector on the phone's end is too loose. The OTG cable that came with Nokia N8 is ok.
I use this OTG cable: www.amazon.com/Electronics-Micro-USB-OTG-Cable/dp/B005GGBYJ4/. Small US company, offers a lifetime warranty, only takes a couple days to get from Amazon (free two day shipping if you have a Prime membership). I've had a few from them and never had an issue (other than I tend to lose them). Perfect fit and just the right length. Good stuff.
AW: USB OTG Cable
I bought one from Conrad electronics here in Germany, it costs like 6 euros and works perfectly.
Sent from my HTC One S using xda app-developers app
I bought a cheap £2.99 cable from Amazon UK which works just fine.
The packet it came in states the brand as 'Afunta' (Made in China).
I have an odd issue whereby I cannot charge my phone with my wireless charger if data is being written to my usb otg , charging worked fine after I took out the usb otg. Any solutions? Thanks
Read somewhere on here before that someone else had the same problem with a mhl adapter. Don't think you can use anything in the port while charging wirelessly.
To my knowledge it can not be done. I know that with cyanogenmod and wired charging with a y otg cable work but not with stock rom.
Sent from my Nexus 5 using Tapatalk
nitramus said:
To my knowledge it can not be done. I know that with cyanogenmod and wired charging with a y otg cable work but not with stock rom.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
will it work on custom roms other than cyanogenmod?
http://forum.xda-developers.com/showthread.php?p=8284
Sent from my Nexus 5 using Tapatalk
Confirmed. I have a Meenova. When it's plugged into USB in usb-otg mode, my Qi charger won't work. Running Slimrom currently. Does it on both my Nexus 5 and Nexus 7 2013.