Related
I bought my HTC S710 just 5 months ago, and my LCD screen cracked while in my pocket!
Did anyone has such a problem?
Is this problem common with this phone?
Do you know if warranty is valid for this damage?
Not a common problem, seems like you would have put too much pressure on it or bumped it against something. I've sat on mine after forgetting it's in my back-pocket, but I keep the LCD inwards and have had no problems.
You probably won't get it warrantied, but it's worth a shot.
@beijmanli wtf!
@SAHILISTHEBEST yeah your device needs to go for service.
and no its not common, i have dropped my device couple of times but not a single scratch yet. I have a scratch guard film on the screen.
yes, i've found in other forums also that this has now become a common problem for VOX and many users have complained about this matter. I think that since this is a manufacturer's technical defect and the Company should take the matter into consideration as this damage is caused not due to mishandling. the below mentioned url proves the same:
http://www.htcwiki.com/thread/1120701/HTC+S710+-+LCD+SCREEN+CRACKES?t=anon
Had the same thing happen to me, basically my fault (screen turned out)
If you have it in your pocket, turn the screen inward and you have a lot less problems
Yes the display is a bit touchier because its so big. (for a phone) its up to the user to be carefull I doubt you'll get it serviced free, although the trend to "not my fault, all your fault" is clear
Jacina said:
Had the same thing happen to me, basically my fault (screen turned out)
If you have it in your pocket, turn the screen inward and you have a lot less problems
Yes the display is a bit touchier because its so big. (for a phone) its up to the user to be carefull I doubt you'll get it serviced free, although the trend to "not my fault, all your fault" is clear
Click to expand...
Click to collapse
I felt amazing when i saw that no physical damage is caused to the housing or any other part. The screen cracked by itself within the housing.
It seems there is some problem with the internal structure of the phone. It cant resist too much pressure i guess.
Hope HTC manufacturers understand this problem soon.
Well in my case it was just a bit too much pressure on the center of the screen, this can happen easily, by hitting the corner of a table for example. You wouldn't see an effect on the housing sind your pants would stop any scratches etc.
Lesson is: Always put the phone with the display to your leg/arse/whatever, just don't let it face outward.
New Screen + Fitting!
You can buy new screens:
http://cnn.cn/shop/s710s730-screen-p-2349.html
And for service manual on how to dismantle your VOX
http://maritime-billeder.dk/uploads/file/VOX_SM_A01 _GENERIC_.pdf
VOXer said:
You can buy new screens:
http://cnn.cn/shop/s710s730-screen-p-2349.html
And for service manual on how to dismantle your VOX
http://maritime-billeder.dk/uploads/file/VOX_SM_A01 _GENERIC_.pdf
Click to expand...
Click to collapse
thanks Voxer,
The manual was really cool n helpful.
I called the HTC Authorised service executive in India n told him the problem. I told them that since the damage was not due to mishandling and my screen broke by itself. they exaxmined my mobile and after makingsome more calls to some of HTC officials, they agreed for the screen replacement of my phone and allowed me a discount of 40% on the new screen.
this link helped a lot:
http://www.htcwiki.com/thread/1120701/HTC+S710+-+LCD+SCREEN+CRACKES?t=anon
My phone will be back within couple of days.
my lcd has cracked once again after getting a replacement one week ago.
wtf...
can anybody tell m where can i purchase it from. the link posted above in this thread states that it is out of stock.
:S
SAHILISTHEBEST said:
my lcd has cracked once again after getting a replacement one week ago.
wtf...
can anybody tell m where can i purchase it from. the link posted above in this thread states that it is out of stock.
Click to expand...
Click to collapse
What the hell are you doing man? diving on the floor? O well... can i suggest instead of buying a new screen very time maybe invest in a good case:
http://www.proporta.com/F02/PPF02P05.php?t_id=3465&t_mode=des
http://www.boxwave.com/products/armorcase/armor-case-htc-vox_2619.htm
VOXer said:
What the hell are you doing man? diving on the floor? O well... can i suggest instead of buying a new screen very time maybe invest in a good case:
http://www.proporta.com/F02/PPF02P05.php?t_id=3465&t_mode=des
http://www.boxwave.com/products/armorcase/armor-case-htc-vox_2619.htm
Click to expand...
Click to collapse
what to say... It was in my pocket while i was playing soccer.
after the match, when i took it out of my pocket, it was terrible.
I've ordered an armor case buti cant find LCD screen replacements anywhere in the internet. can anyody tell me where can i buy a new LCD?
Looking forward to order it as soon as possible!!!
SAHILISTHEBEST said:
what to say... It was in my pocket while i was playing soccer.
after the match, when i took it out of my pocket, it was terrible.
I've ordered an armor case buti cant find LCD screen replacements anywhere in the internet. can anyody tell me where can i buy a new LCD?
Looking forward to order it as soon as possible!!!
Click to expand...
Click to collapse
Luckily for the ones with a cracked LCD screen on a HTC S710, it can now be bought on ebay from China_store! They have them in stock!
Da9L said:
Luckily for the ones with a cracked LCD screen on a HTC S710, it can now be bought on ebay from China_store! They have them in stock!
Click to expand...
Click to collapse
can u post the LINK of china-store u are talking about, so that i can order it as early as possible.
SAHILISTHEBEST said:
can u post the LINK of china-store u are talking about, so that i can order it as early as possible.
Click to expand...
Click to collapse
just search at ebay..
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
Anyone know where I can get a replacement LCD glass for my Desire HD
I believe it's just the glass as the screen seems to still work.
If there's a place in or around London that can replace it for me even better, if not anyone know how difficult it is to replace.
I've noticed a few places on Ebay (China/HK) selling digitizers and complete LCD's but ideally I want somewhere in the UK.
thanks
Elliot
Hi,
I went through a similar experience less than 2 weeks ago, you can even see images here: http://forum.xda-developers.com/showthread.php?t=834335
I rang around several places, none could commit to using GENUINE HTC parts. The only people I found were: www.htcrepairs.co.uk/ - and they even offer a walk in service whereas I found most others did not.
Unfortunately they don't have the parts I require in stock, maybe you can try them.
At the moment, they're the only people I've found in the London area that I'd be willing to give my phone in to...
Did you have any luck with finding anyone else?
Maybe contacting HTC? They can probably repair it for you but it can be pretty expensive though.
Maybe you got some pics?
You could try, as said above, get the glass/screen from eBay.
Repaired my SE K800i with it, where the glass could easily be removed and the new one could be installed within 5minutes.
Don't know how the HTC will disassemble though.
I'm going to try this place on the way home from work: http://www.spsmobile.co.uk I'll let you know how they go. They've got the parts and will charge me £60 for either the lcd or digitzer including fitting.
Here's some pictures. I think they'll get away with just fixing the glass, although it looks bad the lcd still seems to work ok.
Can anyone recommend a case surround?
earazi said:
I'm going to try this place on the way home from work: http://www.spsmobile.co.uk I'll let you know how they go. They've got the parts and will charge me £60 for either the lcd or digitzer including fitting.
Click to expand...
Click to collapse
How did it go?
Did they fix it whilst you wait, or retain the device to work on for a day or two?
More importantly, are they using genuine HTC parts ?
They fix while you wait, they're near Staples Corner (which is a bit of a walk from the tube at Brent Cross).
I need to go back tonight as they messed up and thought I had a Desire and not a HD, they're hoping to get the HD part in today, they're charging me the Desire price.
According to their website they use official parts, but who knows.
Warranty
* We give 3 months warranty on every repair excluding liquid / water damage and physical damage
* Every warranty handset is security sealed. Tampering with the security seal will void the warranty LCD / SCREEN warranty. We fit original screens only and they are security labeled
* Every handset is tested for 24 hours and comes with engineers report
I plan to visit these SPS guys tonight. Lets hope they manage to fix my phone.
I'm hoping to wait around so I can ensure genuine parts are used...
SPS didn't manage to get a Desire HD digitizer for me, they've got 1 on order. They're a little difficult to find (at least they were in the dark) they're behind Staples industrial state, in room 207, small little office. They seemed ok though they.
earazi said:
SPS didn't manage to get a Desire HD digitizer for me, they've got 1 on order. They're a little difficult to find (at least they were in the dark) they're behind Staples industrial state, in room 207, small little office. They seemed ok though they.
Click to expand...
Click to collapse
I posted my feedback in another thread:
c_man said:
I'm back!
Got my Legend fixed earlier this evening by these guys: http://www.spsmobile.co.uk/
They were one of few who were adament they use genuine parts [they allowed me to inspect the parts before installation] AND allowed me to wait whilst they work on it.
Abolutely disgusting/poor customer service and general attitute towards their customers... though the main thing is my Legend is all well again !
Oh, it cost £70 for display + digitizer + installation.
Click to expand...
Click to collapse
c_man said:
I posted my feedback in another thread:
Click to expand...
Click to collapse
In which one?
f.
forelli said:
In which one?
f.
Click to expand...
Click to collapse
Well, I pasted my feedback above? ...but this thread: http://forum.xda-developers.com/showthread.php?t=834335
im terrified of dropping my phone. i dont take it out unless im sat down and have both hands free. eek!
Hey guys, any idea if the back plate is replaceable yet?
HTC Desire HD Broken Digitizer
I broke my HTC DHD touch a few weeks ago, I order a new digitizer in Ebay an I just got it, but I do not see anywhere a video on how to replace the screen can anyone help me with this.
ingeps1 said:
I broke my HTC DHD touch a few weeks ago, I order a new digitizer in Ebay an I just got it, but I do not see anywhere a video on how to replace the screen can anyone help me with this.
Click to expand...
Click to collapse
i would NOT attempt this yourself unless you are HIGHLY skilled and HIGHLY experienced with repairing gadgets
ingeps1 said:
I broke my HTC DHD touch a few weeks ago, I order a new digitizer in Ebay an I just got it, but I do not see anywhere a video on how to replace the screen can anyone help me with this.
Click to expand...
Click to collapse
U didn`t look for it enough Check this thread: http://forum.xda-developers.com/showthread.php?t=883444
Thanks but I do not see a complete teardown guide yet. Looks like the guys on the other thread are working on it but nothing detailed enough. I need to know how to replace the digitizer, looks like not body knows how to do it yet.
A coworker I started working with a few months ago told me about the much-better Sensation he had before his MyTouch 3G. It seems that he still had it, but stopped using it "because the screen cracked." I correctly surmised that it was a simple and cheap to replace touch screen digitizer and described to him that it was "just the glass cover" and that it was "cheap to replace." I have done many such repairs on other phones and gadgets.
He then told me that he had continued to use it until the LCD went blank. There is no reason to think that the LCD inside suddenly cracked, but I can only assume that it also sustained some kind of damage and now also requires replacement. Knowing that the LCD isn't cracked, what are the chances that a replacement LCD + digitizer will restore the phone? I'm concerned because we've already purchased a kit for $65.
Nobody can tell you that off the internet. If we do, that would be pure guess, just as accurate as you would have guessed.
sawo said:
Nobody can tell you that off the internet. If we do, that would be pure guess, just as accurate as you would have guessed.
Click to expand...
Click to collapse
Well, someone could have had the exact same problem and already tried it. I ran into people with the same problem already. I'm just looking for more because some, no doubt, have tried it and others may have an alternate explanation. Reasonable.
there is a good chance that will fix the problem. but since the LCD was working for a while until it blank out, it is possible the problem might be with the circuit board. only way to know is to try it out.
CZroe said:
Well, someone could have had the exact same problem and already tried it. I ran into people with the same problem already. I'm just looking for more because some, no doubt, have tried it and others may have an alternate explanation. Reasonable.
Click to expand...
Click to collapse
The LCD could go blank for several reasons. Faulty LCD, loose cable, faulty board etc. etc. Even if someone had the same problem, the reason for it could be completely different, thefore this wont help you at all except for giving you hope. If this is what you need, then i would say "yes, the change of lcd & digitizer should fix the problem" but you never can be sure unless you try When you start the phone, do you hear the startup sound? This could at least indicate that the phone isnt completely faulty.
brabusamg55 said:
there is a good chance that will fix the problem. but since the LCD was working for a while until it blank out, it is possible the problem might be with the circuit board. only way to know is to try it out.
Click to expand...
Click to collapse
The plus side is that you can't make it worse. So you've got nothing to lose by trying to repair it, other than the few bucks for the parts.
Well, I took it apart to re-seat all the cables and it's still blank. Reading online, I see that a lot of dropped Sensations/Pyramids develop a loose/broken SMT capacitor component near the headphone jack, but I'm not registered on any of the forums I see it discussed on and I can't see the pics. They describe a slightly different problem anyway (screen goes blank after standby). I needed sleep, so I put it all back together and I'll check that out when the parts get here. My hunch is that the LCD panel is fine and that I'll have an extra, assuming the capacitor problem is fixable. I've done some delicate soldering work before but I can't really say that I'm good at it! I didn't see any loose SMT components rattling around so I hope it didn't fall completely out somewhere.
Skipjacks said:
The plus side is that you can't make it worse. So you've got nothing to lose by trying to repair it, other than the few bucks for the parts.
Click to expand...
Click to collapse
Thanks but it's almost $70 for the parts.
Works great! Well, it had the touchscreen sensitivity issue pretty badly but the T-Mobile OTA update fixed that. Transferring all the adhesive bits from one screen to another was down-right frustrating, but I pulled it off and I only see a single spec of dust inside. The dude will be thrilled. I broke the earhook on my Looxcie so I did not make a video but it was full of me tearing and ripping the things anyway and not a good example of how it should be done!
FWIW, there was no way to remove the old screen without denting up the backing plate and prying the heck out of it to free it from multiple adhesives and glues, so I would not have had two good LCDs after testing the replacement even if there was nothing wrong with the original. Good thing it was the LCD at fault! I didn't have to drill anything like the glass replacement video I watched instructed me to do. They didn't realize that the LCD removal allows the flex PCB through just fine. I forgot to thread it back through before seating the replacement LCD in the adhesives and tape left-overs but it flexed enough to allow it through without removing, which was quite a relief after seeing how the original fared after being removed.
Hey guys my screen has been broken brutally.. My younger brother just threw it away!
So the touch doesnt work now but i guess everything else is fine. The volume and power buttons work fine. But the tough or the capactive buttons dont respond.
From what i have researched since the touch and the lcd are glued both will have to be replaced together. So i researched and found an estimate of 65$ for a new digitizer + LCD. Now the problem is even if i order the tough and lcd i dont know how to fix it. I saw the ifixit teardown but dont really understand much since there are no detailed steps in it.
I am not going to repair it myself, will repair it from a local repairer but i am pretty sure around here people dont even know what this phone is, so i dont wanna risk directly handing over it to them. If anyone of you all could guide me with a step by step procedure it would be a greattt help! Please help me guys want a good solution for this precious phone!
P.S i dont wanna send it to Oneplus since only the shipping would cost me around 100$ and 100$ more for the screen replacement.
and please dont advice about how i should have taken better care! I had applied a nilkin tempered glass protector but since it hit the wall at the sides it dint really help!
I should have had a case! </3 i was on my way to buy one
Step 1: Open The Back cover
Step 2. Remove the screws
Step 3: ...... please guide me about how to proceed with detaching the screen.
i would b glad to share one of my sharable invites with you if you help me with it or a video would be just paradise! :good:
I
Where do you found LCD + digitizer for only 65$??
The less expansive i've found is on ali and it's around 125$...
I'm interested too as i broke my oneplus as you did... Except it wasn't my little brother who thrown it away, it was only me letting it down to the floor...
I think, about the procedure shown in ifixit, it is doable fixing the broken screen... It just seems to ask proper tools ans patience... And a heat gun... (Or hair dryer!!)
Procedure?
sosa106 said:
I
Where do you found LCD + digitizer for only 65$??
The less expansive i've found is on ali and it's around 125$...
I'm interested too as i broke my oneplus as you did... Except it wasn't my little brother who thrown it away, it was only me letting it down to the floor...
I think, about the procedure shown in ifixit, it is doable fixing the broken screen... It just seems to ask proper tools ans patience... And a heat gun... (Or hair dryer!!)
Click to expand...
Click to collapse
ifixit doesnt show any procedure.. m pretty sure you dont need to go through the first 19 steps before you an finally dettach the screen. As far as i know most of the steps mentioned in the middle are not required. So i want someone to assist me with the required steps.
heat gun? i dont think its needed that would be needed if the digitzer and lcd were seprate. Since thats not the case it should be even easier. Oh yes we need the right tools but i guess a local repairer would have them anyway. i would just want the procedure so i could guide him since he wont know about the procedure, about this specific device
I got the 65$ one from ali express too,
go to the site and search for oneplus one digitizer. There are a list of options. Cant post links!
amitshah261 said:
ifixit doesnt show any procedure.. m pretty sure you dont need to go through the first 19 steps before you an finally dettach the screen. As far as i know most of the steps mentioned in the middle are not required. So i want someone to assist me with the required steps.
heat gun? i dont think its needed that would be needed if the digitzer and lcd were seprate. Since thats not the case it should be even easier. Oh yes we need the right tools but i guess a local repairer would have them anyway. i would just want the procedure so i could guide him since he wont know about the procedure, about this specific device
I got the 65$ one from ali express too,
go to the site and search for oneplus one digitizer. There are a list of options. Cant post links!
Click to expand...
Click to collapse
I don't think that you will find someone who can help you. You will need detailed instructions and images, and I don't think anyone has documented a thorough disassembly yet. You can check on YouTube, it's been a while since I've checked myself. I did disassemble one of my OnePlus One's a few weeks ago because the motor was malfunctioning, but instead of trying to fix it I simply returned it for a refund.
I just need to know how is the screen attached
rickyx32 said:
I don't think that you will find someone who can help you. You will need detailed instructions and images, and I don't think anyone has documented a thorough disassembly yet. You can check on YouTube, it's been a while since I've checked myself. I did disassemble one of my OnePlus One's a few weeks ago because the motor was malfunctioning, but instead of trying to fix it I simply returned it for a refund.
Click to expand...
Click to collapse
i dont wanna know all the steps. I just wanna know how is the screen attached. I think it should over all be pretty standard for all phones. So should not be much stress for a local repairer. And from what i have read when the digitizer + lcd are glued it is a very easy job to replace them together. I just want to be sure from my side that say the screen needs to be attached the same way that a Galaxy S2 display is attached to the phone. Then i can just ask the repairer if he would have known how to repair a GSII.
I really cant ship it back to OPO its gonna be almost as much expensive as buying a new One!
amitshah261 said:
i dont wanna know all the steps. I just wanna know how is the screen attached. I think it should over all be pretty standard for all phones. So should not be much stress for a local repairer. And from what i have read when the digitizer + lcd are glued it is a very easy job to replace them together. I just want to be sure from my side that say the screen needs to be attached the same way that a Galaxy S2 display is attached to the phone. Then i can just ask the repairer if he would have known how to repair a GSII.
I really cant ship it back to OPO its gonna be almost as much expensive as buying a new One!
Click to expand...
Click to collapse
Did you only buy the digitizer? You should have bought the screen and digitizer that are already fused. It is absurdly difficult to take off only digitizer and broken glass cleanly. Believe me, I've been repairing things all my life and this is one of the hardest things to fix.
rickyx32 said:
Did you only buy the digitizer? You should have bought the screen and digitizer that are already fused. It is absurdly difficult to take off only digitizer and broken glass cleanly. Believe me, I've been repairing things all my life and this is one of the hardest things to fix.
Click to expand...
Click to collapse
I haven't bought it yet. But dont worry i will b buying the digitizer and the LCD that are already fused together.
But even attaching to the phone is also kind of a challenge right?
guys,
Anyone please suggest regarding how durable and trustworthy are these digitizer +lcd combo that are available on ebay.in?
Can i purchase them? I broke the screen badly and waiting for a replacement. Found a replacement on ebay.in for apprx 100$. Thats fine with me but need suggestions from users who already tried using these screens...? can i go ahead and get it done from a repair shop?