[Q] Infuse 4G stuck in recovery - Samsung Infuse 4G

Hey everyone,
I have a rooted Infuse that I've gotten stuck in recovery mode and I'm looking for some help! I have flashed several different ROMs over the last year but made a mistake last week by trying to take a short cut... Ya I know, noobie move. I had installed a rom and set up my phone but forgot to instal BLNTouchwake (it was compatible with the ROM) so I booted into recover any tried to install BLN without factory reseting and doing everything all over again. It messed up my phone a bit but I was able to flash a ROM onto it again and it worked until today. I tried to flash Carbon Rom 1.7 and it will no longer load a ROM. I am getting error status 0 and can't successfully flash a ROM anymore. I read a little bit about error 0 and that it's caused by a script error but that's starting to go beyond my technical knowledge and I have no idea how to correct that.
If someone could please give me some steps to try to get my phone up and running again that would be awesome!
Thanks,
Wardo

wardo777 said:
Hey everyone,
I have a rooted Infuse that I've gotten stuck in recovery mode and I'm looking for some help! I have flashed several different ROMs over the last year but made a mistake last week by trying to take a short cut... Ya I know, noobie move. I had installed a rom and set up my phone but forgot to instal BLNTouchwake (it was compatible with the ROM) so I booted into recover any tried to install BLN without factory reseting and doing everything all over again. It messed up my phone a bit but I was able to flash a ROM onto it again and it worked until today. I tried to flash Carbon Rom 1.7 and it will no longer load a ROM. I am getting error status 0 and can't successfully flash a ROM anymore. I read a little bit about error 0 and that it's caused by a script error but that's starting to go beyond my technical knowledge and I have no idea how to correct that.
If someone could please give me some steps to try to get my phone up and running again that would be awesome!
Thanks,
Wardo
Click to expand...
Click to collapse
may need to start over from gb stock.
http://forum.xda-developers.com/showpost.php?p=28323349&postcount=4 - look here for some links
or this thread:
http://forum.xda-developers.com/showthread.php?t=1629079
post #3 - just the kernel flash may be enough to get you back on cm10 track..if not start over from gb
need to know how to use heimdall..if you don't read the heimdall thread...just make sure to read all of it...some due diligence is needed
if you're not comfy with heimdall...use odin - i can't offer much help there

Thank you! I have been looking through threads all day trying to get this right. I have a Rogers infuse so I believe that I need the UXKG3 kernel but I have not found a single link that is still working to download them. Will the UCLB kernel work for my phone or will that create the rainbow effect on my screen?
qkster said:
may need to start over from gb stock.
http://forum.xda-developers.com/showpost.php?p=28323349&postcount=4 - look here for some links
or this thread:
http://forum.xda-developers.com/showthread.php?t=1629079
post #3 - just the kernel flash may be enough to get you back on cm10 track..if not start over from gb
need to know how to use heimdall..if you don't read the heimdall thread...just make sure to read all of it...some due diligence is needed
if you're not comfy with heimdall...use odin - i can't offer much help there
Click to expand...
Click to collapse

wardo777 said:
Thank you! I have been looking through threads all day trying to get this right. I have a Rogers infuse so I believe that I need the UXKG3 kernel but I have not found a single link that is still working to download them. Will the UCLB kernel work for my phone or will that create the rainbow effect on my screen?
Click to expand...
Click to collapse
roger's phone comes preloaded with bootloaders...it is unlikely that you will get rainbows..if you're looking to get to jb..start with any gb..then ics..then jb

Related

[Q] CWM Wont work and other aggravating problems- What can i do?

Hello, boy do I have a mishap. Well, anyway to begin I will say that I decided I wanted to root my phone to debloat it. So what I did, is downloaded the EE4 update and did the VooDoo V4 Kernel that flashes CWM and EXT4 and other junk. Well that all went great. I got it rooted and such but then just tinkering around I went into Rom Manager and told it to back up. WELL, when I did this the phone got locked on the SAMSUNG boot screen for hours and continued to refuse to boot. SO, I attempted to fix it by installing altered beast just to get the os running again and went into clockwork and backed it up. Then I went to the rooted ed1 to bring it back up to EE4 rooted and with the voodoo kernel and such but it refuses to open clockwork! The voodoo kernel changes filesystems and roots it and such but clockwork wont load. When I try to flash it in rom manager it says its succesful and then i go to reboot in recovery. It takes me to the Samsung Recovery 3e, I try to the update.zip, (yes i took the cwm recovery-update.zip and renamed it and through it in the sd card root) but all that happens is that a progress bar shows up for a split second then the android guy with the triangle and ! shows up and it does nothing. Help? I really need to back it up, preferably in the rooted ed1 but in ee4 will work to. Any ideas would be appreciated. I used odin v1.3 by the way. Im willing to try anything to get clockwork to boot so i can back it up. What do I do?
EDIT: Also, now when I go into 3e recovery, it complains saying " cant mount /dev/block/mmcblk0p3 " or something like that.
Did you read anything on this forum beforehand? Or just go link by link downloading files and deciding what to try on your phone?
Just saying..
Yeah, I did. Ive searched everywhere. I cant find anything about my problem. Ive looked at things that are close, hoping a solution can be found but nothing and no I wasnt just downloading files and spoon feeding them to my phone.. I just wanted to be able to debloat it.
Go search about Rom Manager and let us know what you find out...
I dont see how thats going to get me one step closer to solving my problem. Ive done the searching, now im asking.
Start w/ this one. http://forum.xda-developers.com/showthread.php?t=1100384
I can't tell where you are currently on your phone from reading that as it's to much text in one paragraph and it isn't put together in a logical sense and seems to jump around. I would look at the instructions for going to rooted EE4 in the Dev forum as that should get you to where you want to be with voodoo/cwm/rom
Instead of being a Forum Snob. If you know the answer, why don't you just help him out?
There's an abundance of confusing information on here and everyone uses acronyms. I too searched for hours on how to solve a similar problem and ended up having it taken care of for me. People join communities like this one for help. Not to get flamed for asking a question. It may be elementary to YOU but not everyone.
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Jessman123 said:
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Click to expand...
Click to collapse
Yes. But don't use rom manager. Use imnuts cwm recovery.
Sent from my SCH-I510 using Tapatalk
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Jessman123 said:
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Click to expand...
Click to collapse
Yes
Sent from my SCH-I510 using Tapatalk
so it is unlocked?? What does the exclamation triangle mean, when i try to do the update.zip from the samsung bootloader?
Oh and sorry if Im not getting this. Are you saying use a application that imnuts made? If so, could you be so nice to link it? Or a method he used? I looked for stuff but I didnt find anything other then what looks like a stock rom/kernel ed1 from him
I know how it is to be frustrated, but like they all said all of your questions have already been answered.
Here's my attempt to help:
Your problem lies in trying to flash CWR through ROM Manager, it currently doesn't play well with our phones. Word is that Koush (the creator) needs to update something for it to work with our phones. The bootloader is unlocked.
To flash imnuts' version of CWR, you'll need to use Samsung's leaked software called Odin - it's PC only. The alternative is Heimdall which is supposed to be cross-platform compatible, but the latest version is command-line only.
You have to find out if you've converted your system to EXT4 or if it's still RFS. That depends on if you have the Voodoo lagfix enabled or not. Check out the dev section and look for the titles that say [RECOVERY], [ODIN], [ROM], and/or something like "Get yourself to EE4 successfully".
A few links:
[HOW-TO] Get a rooted version of EE4
[RECOVERY][6-11-11]Clockwork Mod Recovery
[KERNEL][06-02-11] PeanutButta Jelly Time
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Jessman123 said:
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Click to expand...
Click to collapse
The recovery is a separate flash, both in odin. First the kernel, then Recovery.
Just follow here from the beginning, it should work for you:
http://forum.xda-developers.com/showthread.php?t=1122657
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Jessman123 said:
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Click to expand...
Click to collapse
You do need Odin to load that, but i'm wondering why you want to? Did you install the PBJ kernel following the instructions from the other link?
If you want to go down this route, be sure to apply the SD Card fix as well - you'll find posts about it.

[Q] Multiple Questions - Backup Issues, Installing a New ROM, etc.

Hello everyone. This is my first post, so please be gentle. I've been reading around and I can't seem to find specific answers to my questions so I figured it would be best to make a post. This is my first Android phone and also the first phone I have rooted so I'm trying to be extra careful. I've already received tons of help from other threads in these forums, but as I said I've still got a few questions.
I rooted my SGS4G using SuperOneClick v2.1.1, then proceeded to install CWM ROM Manager as per the instructions I found in many articles online. Once I got that installed I was unable to make backups as it would boot me into the stock recovery menu, which led me here searching for answers. That is when I came across this thread: [RECOVERY]CWM FINAL for the SGS4G After following the instructions I wasn't exactly sure what to do, so I attempted to boot into the "new" recovery menu which ended at an infinite boot logo, which I assumed was a soft brick after reading around a bit.
After thoroughly freaking out about my phone being bricked I looked around a bit more and came across this thread: [GUIDE] Noobs guide to Odin to flash your SGS4G (Windows) Following that thread I was able to install the T959VUVKB5 Stock + Root ROM which restored my soft brick. Once that was installed I installed CWM ROM Manager again thinking the Recovery Menu would be fixed and I could finally make a backup before moving on, but it wasn't. Then I came across this thread: [Odin][Kernel] drhonk's Bali 3.3 for Froyo, Installs CWM!
After installing drhonk's Bali 3.3 for Froyo kernel I was finally able to make a single nandroid backup (and backup my apps using Titanium Backup)! I messed around on the phone for a few days with no issues (other than the Android flickering in the boot logo). Now I am ready to move on to trying out a few ROMS. So, first thing first I said: I need to make another backup. So I entered the Recovery Menu via the CWM ROM Manager and attempted to make another backup, and this is what I get:
E: failed to open /etc..... (I couldn't write fast enough to copy the entire message)
E: unknown volume for path [/sdcard] (10s)
The second of which repeated over and over until it reached 0s and then my phone was rebooted.
TL;DR
- Rooted using SuperOneClick
- Installed ROM Manager and couldn't make a nandroid backup correctly
- Attempted to install CWM FINAL for the SGS4G, which resulted in a soft brick
- Restored using ODIN and installed T959VUVKB5 Stock + Root ROM and drhonk's Bali 3.3 for Froyo kernel
- Cannot make nandroid backups (other than the initial one apparently), Recovery Menu does not seem to be working correctly
- I am not comfortable trying new ROMs until I am able to make backups correctly
Anyway, so here are my questions:
1. What do I need to install to allow me to make nandroid backups correctly? Or is there another app besides CWM ROM Manager that will allow me to do this?
2. I would like to try a few other ROMs, but I when I reach the so-called "Do the mounting stuff" step I am unable to continue as my Recovery Menu isn't working correctly. What do I need to install in order to be able to do complete this step? I have a feeling the answer to #1 will solve #2 as well.
3. I would like to try a few of the GB ROMs (such as Valhalla v1.3.2 or Stock Gingerbread 2.3.3 Deodexed + Root), but I am not sure exactly where to go from here. Is the GB Ext4 Starter Pack the way I need to go, or would this way be better? Can I do either of these without a working Recovery Menu?
Thanks in advance for all the help!
Your first mistake was rom manager. It does not work for this phone correctly. Odin one of Dr honks kernels to get cwm recovery. They are in the dev section.
Sent from my SGH-T959V using xda premium
im not sure how many times this has been posted (i think i say this once a day....) but rom manager DOES NOT WORK ON THIS PHONE.
it is fine. if you can wait a day or two, i will make a nice noob guide on getting from stock to a custom rom. i will be sure to link every pertinent thread and be sure to have a little FAQ section. hopefully it will help you.
Exodian said:
Your first mistake was rom manager. It does not work for this phone correctly. Odin one of Dr honks kernels to get cwm recovery. They are in the dev section.
Click to expand...
Click to collapse
As I said in the post, I've already installed drhonk's Bali 3.3 for froyo kernel.
jager555 said:
im not sure how many times this has been posted (i think i say this once a day....) but rom manager DOES NOT WORK ON THIS PHONE.
it is fine. if you can wait a day or two, i will make a nice noob guide on getting from stock to a custom rom. i will be sure to link every pertinent thread and be sure to have a little FAQ section. hopefully it will help you.
Click to expand...
Click to collapse
Thanks, but I figured that out shortly after installing it. What alternative are we supposed to use? Hopefully your noob guide will help.
are you sure you understand? seeing as you mentioned BOTH bali and krylon's cwm, yet you still do not know how to get the custom recovery on the phone. once again, i will write a nice guide for you, so for now, just odin back to stock and give me a day or two. once im out of work, i will take a nap and write this for you.
jager555 said:
are you sure you understand? seeing as you mentioned BOTH bali and krylon's cwm, yet you still do not know how to get the custom recovery on the phone. once again, i will write a nice guide for you, so for now, just odin back to stock and give me a day or two. once im out of work, i will take a nap and write this for you.
Click to expand...
Click to collapse
Apparently I do not understand. I guess I will just wait for your guide. Hopefully it will pick up where the other guides failed (for me anyway).
Edit: After reading around a bit I think I understand where I went wrong. As a noob I was confusing CWM with ROM Manager (after all, they're both made by the same people right? I believe that's what was confusing me ). I have since uninstalled ROM Manager and have booted to the Recovery Menu and successfully made a backup.
I myself have been a member for coming up on one year. And when I originally joined I was modding my Mytouch 3G. Much easier phone to mod and especially with ROM manager. This phone on the other hand requires more attention to detail. It is very important to do your due diligence to research this site for answers before posting. The reason is, all the wonderful and talented folks making all this possible are providing us all these great hacks, cracks, and roms for free. The information is here if you just look for it. Now if you are having trouble understanding the info that is also understandable. I find questions are better received if you show everyone what you have researched and then say what your are confused about.
Enough of the lecture, the end result is that everyone here is really nice and helpful. Here are the 3 links you should save. The Bible lists everything about our phone. Now at this stage in the game unless you really want to get more background on how the phone has evolved from Froyo to GB you won't need to read the Bible. The first thing you will need to do is follow the instructions for Bali 3.3 + CWM. This will provide you with the Red CWM recovery making it possible for you to flash Froyo Roms. Once you have completed this step you can move on to the GB Starter Pack. This guide will prepare your phone with the correct bootloaders it requires to run GB Roms. Once this process has been completed you can flash GB Roms. And if you need a quick list of the roms available just look in the Bible. Hope this helps, just be patient and make sure you understand what you are reading and attempting before doing anything. And if you don't understand a step or a process then come and ask and you'll get better answers and better understanding of what you're actually doing to your phone.
SGS4G Bible
http://forum.xda-developers.com/showthread.php?t=1117554
Bali 3.3 + CWM
http://forum.xda-developers.com/showthread.php?t=1195860
GB Starter Pack
http://forum.xda-developers.com/showthread.php?t=1223765
Thanks for the help. I tried to do as much research as I could before posting (as you can see, I've posted two of the three links you suggested in my OP, and I basically keep the Bible open at all times ). It's just the little things that I find confusing, which is why I posted this thread. It's nice to know that from this point I can proceed to the GB Starter Pack and play around with the GB ROMs, but I think I'd like to try a few Froyo ROMs before I take that step Thanks for confirming that!
Sorry for the double post but I have another question.....
I've been reading over FB's GB Ext4 Starter Pack thread and I just wanted to make sure that once you get to the part where you flash your "favorite GB rom" that Valhalla v1.3.2 would be an acceptable ROM to flash there. If not, which ROM should I flash first, then flash Valhalla? Thanks in advance.
Yes, Valhalla would be fine to flash at that point (any version). just as long as you went through each step of the directions first. you'll be fine.

[Q] Serious question/ need help

Hello fellow SGS4G owners, i have been trying to root/flash my phone for about 3 days now...with no luck of course...i was trying something new today and i think i may have bricked my phone...looking for verifications or answers...when i power up the phone the only thing that comes up is a phone icon...3 yellow dots...yellow triangle...3 yellow dots...and a computer...
has anyone ever seen this before and if so, is it fixable or is it dead.???
That's happened to me before. I treated it as an alternative to the download mode screen. It worked just fine.
ok so i should just keep doing what i was doing...?
Use the guide in the second link of my signature then when finished look at the guide in the first link of my signature.
ok thank you to both of you...you have help me out in a big way...apparently i just need to flash a modem to get it working again...i will use your guide for dummies ( since i feel like one...hahaha ) and post any further progress...
once again thank you, both of you
Lumin30, when updating kies it is showing as an unregistered device and is not allowing me to update kies...any suggestions?
Flash a modem?
A modem is not going to help you recover your phone. Bhundven's Heimdall One-Click will recover your phone. I do not mention modems in either of my guides so you have me confused.
i know, i was using Juls317's step by step flashing a kernal and modem...
apparently im running kj6 now...but still on froyo and not gb
twisted03 said:
i know, i was using Juls317's step by step flashing a kernal and modem...
apparently im running kj6 now...but still on froyo and not gb
Click to expand...
Click to collapse
Woah! lol just flash one of these...
http://forum.xda-developers.com/showthread.php?t=1358498
and you'll be on gingerbread kj6 with either stock kernel or if you choose a modded kernel
Just be sure to backup everything beforehand.
Lol...i got everything working yesterday morning around 4am...it was a pain but i got it..running Raver's Valhalla Black Edition...
Ever since that post i have been in contact with Juls...he has helped me through the stuggle....lol
http://forum.xda-developers.com/showthread.php?t=1215748&page=16

[Q] NEEd help bricked my phone!

Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Drake316PR said:
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Click to expand...
Click to collapse
yeah, ROM Manager is a bad thing when it comes to our phone.
ODIN does not put your phone in download mode. There are numerous ways to accomplish that and those are outlined in a few different posts here as well as the wiki.
Do you know if you were on Froyo or Gingerbread before you tried to flash something? Also, what ROM did you try to flash? Going from Froyo to Gingerbread, and vice versa, requires you to flash the proper boot loaders.
I suggest checking out Lumin30's [GUIDES] Fresh out of box Galaxy S 4G [SOLVED] | Heimdall One-Click For Dummies. Awesome guides and they should get you back to a working status.
Reply
I was on Gingerbread 2.3.6 something like that, I wanted to flash to Vahalla Black but didn't even get close to that process sorry for my english. I will check the guides thanks for the fast respond! Thanks again already on download mode!
No worries on the English; you did quite well
Let us know how it goes and if you need help. There are plenty of us here that can help. Once you get the one-click installed, you should be able to flash Valhalla Black with no problem.
Good luck!
Just fine I think
Sent from my SGH-T959V using xda premium
Thanks!!
Thank you very much!! Fixed my phone thanks to you and XDA! I will try to install a custom rom this time I hope to do it well thanks to the links you provided.
Question about flashing ROM
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Drake316PR said:
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Click to expand...
Click to collapse
Use the method in the guide in the first link of my signature. Look for Flashing Custom ROM's. You will be using CWM to get Valhalla Black on your phone. The guide has step by step directions.

Hello SGS4G XDA section! Newbie needs a lot of help!

Hey guys i`ve recently managed to get an SGS 4G Vibrant ( i believe that i am at right place to seek for help ) , i have the T-Mobile version of the phone. I need help switching to different/better ROM, at this moment the phone uses the stock one ( or i believe so ). I`ve been tru the threads and saw that there are a lot of stuff posted about what you need to do/have to flash a rom, but i just cant understand the right order of doing the things.
If its posible can someone really quick just post the steps for the guide for flashing a ROM to the phone. I have previous expiriance with android phone and i am aware how thing go, just as i said i cant get the right order of puting all the thing at one place.
For the phone i used to have was like, first i had to install an stocklike ROM which had recovery, but before that i had to get some kind of software for LG that alowes to flash the rom via download mode. So is the same here? It would be awesome if someone can link or atleast type all the software and other thing i need to have installed to make this work. For now what i have is the USB drivers for Samsung.
Thanks in advance!
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
sent from me
Ok, that helped, not sure how i missed it. I am gonna write down what i did so far, so you could see if i messed up something.
I rooted the phone via SuperOneClick 2.2, then i installed the SGS Kernel Flasher, and then flashed the kernel, my current phone was running an 2.3.7 android, so i used the Basic with a Twist`s kernel ( i hope i did it right ), and now the phone rebooted and some different boot screen apiared with some Robotic Chick speeking some stuff, BUT for now the phone load to there, it doesnt wannt to load.
So did i messed up something, or ....
Can you go into recovery by holding Volume Up+Volume Down while pressing the power button and as soon as the SGS 4G splash appears leaving the power button ?
If so and you can see CWM Ver. 5.0... then kernel was successfully flashed.
You shouldn't be getting a bootloop.
What ROM do you want to flash ? If you want to flash GB then I suggest Barebone/Valhalla of some kind.
If you want ICS - Go to the CM 9.1 thread and follow the instructions. After that you may change to AOKP or MIUI or all the rest of the ICS ROMs you wanna try.
invictos said:
SGS 4G Vibrant
Click to expand...
Click to collapse
This section is not for the Vibrant.
Check here: http://forum.xda-developers.com/forumdisplay.php?f=708
I am sorry I do not know how to get you back to where you started before flashing the wrong ROM.
Good luck
Well, it wasnt a bootloop, it just loaded to some point and stoped. Gladly still got the download mode and brought it back to normal to how it was. Thats why i came here to ask, `couse there are too much similiar sgs`s and stuff for them here, i just got confused whats what. Got to start from scratch anyway, at least i didnt bricked it
http://forum.xda-developers.com/showpost.php?p=21953587&postcount=1 <---- That's a post by Lumin 30 with a guide on how to get from stock to custom GB. If you want to get to ICS then use CWM 5.0.x.x.

Categories

Resources