I'd like to turn my recovery back to stock. I'm currently running 4.2.1 stock rom with TWRP 2.5. I'd like to get the original recovery back and reverse root. It's ok if the bootloader is unlocked.
Can I just flash the original firmware and it will remove root and return the recovery to normal?
I have the TF300T-US_10_6_1_15_3-UpdateLauncher.zip file downloaded for that purpose...just want to make sure.
Any help is much appreciated - I searched but only found info on other devices.
That should work (follow this guide here), but you can't relock the firmware yet.
c0ded said:
That should work (follow this guide here), but you can't relock the firmware yet.
Click to expand...
Click to collapse
That's all the confirmation I needed. Thank you!
Related
So I would currently like to upgrade my tablet to the Official JB bootloader. I am rooted, and unlocked running Hiemanshu's 9/25 build. I've noticed that many of the custom ROM's I'd like to try list the Official JB Bootloader as a requirement. I have followed the nvFlash tutorial, and now currently have the AndroidRoot 9.4.5.30 Bootloader installed.
So to sum it up:
Unlocked + Rooted
I'm running Hiemanshu's 9/25 CM10 Build
I have performed nvFlash and am currently on AndroidRoot 9.4.5.30 Bootloader
My recovery is TWRP 2.2.2.3
Could anybody provide me with some instruction on where/how to find the Official JB Bootloader, and how to properly install it on my tablet? Thanks for any help!
If you want just the bootloader it is posted in the twrp thread.
Otherwise go to asus.com and download the latest rom.
lafester said:
If you want just the bootloader it is posted in the twrp thread.
Otherwise go to asus.com and download the latest rom.
Click to expand...
Click to collapse
Done! I was actually on the IRC channel the other day and Dees_Troy himself posted that same link for me. I didn't know it was flashable! I was using fastboot commands to try and flash it but it wasn't working, looks like that was a good thing!
would someone tell me if there is a way to accept the newest update? I have never used Odin and my bootloader is locked. Is there a zip file I can flash or do I have to revert back to stock to accept the update? A detailed guide would be very appreciated. Thanks in advance
SubaruCop said:
would someone tell me if there is a way to accept the newest update? I have never used Odin and my bootloader is locked. Is there a zip file I can flash or do I have to revert back to stock to accept the update? A detailed guide would be very appreciated. Thanks in advance
Click to expand...
Click to collapse
section 6 of my guide...odin back to f2 or g1, then ota to latest. although since your rooted, unlock bootloader, flash cwm, then flash scroslers ultra clean g7 base.
Hi friends,
I am having Verizon Samsung galaxy S3 I535.
hardware version is i535.10.
Using in india aircel gsm sim on it n works very fine 3G data,call and sms.
I don't know phone is unlocked by some method or factory unlocked phone. ( but in start up screen it shows SAMSUNG CUSTOM WITH UNLOCKED ICON)
I am not able to update to 4.3 update in my phone via Verizon utility software application.
Only OTA Update package is downaloading, update is not installing,
Pls help me to update 4.3
If u want further details i can send you screen shots
uvankarthik said:
Hi friends,
I am having Verizon Samsung galaxy S3 I535.
hardware version is i535.10.
Using in india aircel gsm sim on it n works very fine 3G data,call and sms.
I don't know phone is unlocked by some method or factory unlocked phone. ( but in start up screen it shows SAMSUNG CUSTOM WITH UNLOCKED ICON)
I am not able to update to 4.3 update in my phone via Verizon utility software application.
Only OTA Update package is downaloading, update is not installing,
Pls help me to update 4.3
If u want further details i can send you screen shots
Click to expand...
Click to collapse
Download this full stock firmware http://www.androidfilehost.com/?fid=23134718111254196 then use Odin to flash, once done take the OTA and it should be fine. BTW, once upgrade to 4.3 your bootloader will be locked permanently meaning you can't flash custom firmware (rom/kernel/recovery), the only thing you can do is root with saferoot. can be found here http://forum.xda-developers.com/showthread.php?t=2565758
buhohitr said:
Download this full stock firmware http://www.androidfilehost.com/?fid=23134718111254196 then use Odin to flash, once done take the OTA and it should be fine. BTW, once upgrade to 4.3 your bootloader will be locked permanently meaning you can't flash custom firmware (rom/kernel/recovery), the only thing you can do is root with saferoot. can be found here http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
If i use Odin to flash and installing custom firmwares, what will be the my phone status?
Again it will work with Gsm? bcz its basically verizon phone i dont want to mess up with basic features.
uvankarthik said:
If i use Odin to flash and installing custom firmwares, what will be the my phone status?
Again it will work with Gsm? bcz its basically verizon phone i dont want to mess up with basic features.
Click to expand...
Click to collapse
If you still want to install custom firmware then DO NOT TAKE THE 4.3 OTA UPGRADE. If you decided to flash custom rom then after flash stock MF1, you need to unlock bootloader, root, flash recovery then flash custom rom (most custom rom already rooted so you probably don't need to root). Your phone status will be CUSTOM.
buhohitr said:
If you still want to install custom firmware then DO NOT TAKE THE 4.3 OTA UPGRADE. If you decided to flash custom rom then after flash stock MF1, you need to unlock bootloader, root, flash recovery then flash custom rom (most custom rom already rooted so you probably don't need to root). Your phone status will be CUSTOM.
Click to expand...
Click to collapse
okay i will not upgrade to 4.3 OTA. i will go for custom rom now my question is,
if am using custom rom on my unlocked i535 will it be locked again to Verizon??
uvankarthik said:
okay i will not upgrade to 4.3 OTA. i will go for custom rom now my question is,
if am using custom rom on my unlocked i535 will it be locked again to Verizon??
Click to expand...
Click to collapse
Yes you can relock again if you want.
buhohitr said:
Download this full stock firmware http://www.androidfilehost.com/?fid=23134718111254196 then use Odin to flash, once done take the OTA and it should be fine. BTW, once upgrade to 4.3 your bootloader will be locked permanently meaning you can't flash custom firmware (rom/kernel/recovery), the only thing you can do is root with saferoot. can be found here http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
Haviing only used Odin when I initially rooted my phone a year ago, I need to ask some specifics on your instructions.
1. Do I boot the phone into Download mode when flashing?
2. Do I flash it by selecting the PDA box and selecting the file there?
3. This will make my phone basically "out of the box" and back to stock recovery, correct?
Thanks in advance.
mkuhl2000 said:
Haviing only used Odin when I initially rooted my phone a year ago, I need to ask some specifics on your instructions.
1. Do I boot the phone into Download mode when flashing?
2. Do I flash it by selecting the PDA box and selecting the file there?
3. This will make my phone basically "out of the box" and back to stock recovery, correct?
Thanks in advance.
Click to expand...
Click to collapse
Your memory stills serve you right...YES to all three.
buhohitr said:
Your memory stills serve you right...YES to all three.
Click to expand...
Click to collapse
Thanks for your quick reply...I hope this solves my issues and gets me back to pure stock Verizon where I can blame then if I have any problems my phone and/or service. :fingers-crossed:
buhohitr said:
Yes you can relock again if you want.
Click to expand...
Click to collapse
kindly share some step by step tutorial guide for installing 4.3 based custom rom
pls suggest which is good custom firmware too
uvankarthik said:
kindly share some step by step tutorial guide for installing 4.3 based custom rom
pls suggest which is good custom firmware too
Click to expand...
Click to collapse
The stock root rom is probably the most stable one. http://forum.xda-developers.com/showthread.php?t=2591895 just follow the instruction on this link.
A customer brought his phone and he tried to flash on his own, he did not unlock the bootloader. I've tried to flash without unlocking the bootloader but have no luck getting back to stock. Since the phone will not boot into a usable menu I cannot unlock the bootloader. I have done a lot of research and cannot find a flawless way to do this. Is there anyone that has a direct way to fix this. Photos attached are when the phone is booted up normally, and in download mode. Thank you in advance.
https://www.dropbox.com/s/ul1vw5dkkycpqeo/20150129_164414.jpg?dl=0:
https://www.dropbox.com/s/siy19wfk84l20my/20150129_164457.jpg?dl=0:
https://www.dropbox.com/s/hpxpj1efxkisd17/20150129_164717.jpg?dl=0:
https://www.dropbox.com/s/mxnoergaz9ib1b3/20150129_164632.jpg?dl=0:
razor1 said:
A customer brought his phone and he tried to flash on his own, he did not unlock the bootloader. I've tried to flash without unlocking the bootloader but have no luck getting back to stock. Since the phone will not boot into a usable menu I cannot unlock the bootloader. I have done a lot of research and cannot find a flawless way to do this. Is there anyone that has a direct way to fix this. Photos attached are when the phone is booted up normally, and in download mode. Thank you in advance.
Click to expand...
Click to collapse
Unfortunately, the bootloader cannot be unlocked on your customer's Verizon S3. Based on the Dropbox photos of Download mode, I'd wager that phone was on KitKat 4.4.2 VRUDNE1 before they attempted to modify it. That software comes with a locked bootloader that has not been unlocked. VRUDNE1 4.4.2 is the only software that can be flashed on the phone using Odin. Flash the VRUDNE1 tar in the PDA section of Odin and it *should* allow you to boot into the rom after it has flashed the firmware.
What have you and also the customer attempted to do to the phone?
Edit: I believe Odin 3.07 can be used, if not then you would need a newer version of Odin for Windows computers.
thank you very much, that got me back to stock at least. I appreciate the help! Next I need to wait for the 4.4.2 bootloader unlock if it ever comes out. Thanks again!
razor1 said:
thank you very much, that got me back to stock at least. I appreciate the help! Next I need to wait for the 4.4.2 bootloader unlock if it ever comes out. Thanks again!
Click to expand...
Click to collapse
To be realistic, there won't be a bootloader unlock method on this phone any time soon. The phone has been bootloader locked since 2013 OTAs without an unlock tool found. The only thing you can do is use Safestrap which hijacks the boot process and allows the user to dual boot another VRUDNE1 4.4.2 TouchWiz rom. Our version of Safestrap requires the stock VRUDNE1 4.4.2 kernel in order to boot another VRUDNE1 rom. They also need to flash VRUDNE1 kernel modules in order to have working wifi as well. All the info you need can be found here in our sticky: http://forum.xda-developers.com/showthread.php?t=2639337
This means no AOSP roms, no custom kernels, no using roms on 4.3 or earlier, and as stated before no bootloader unlock.
Sent from my SCH-I535 using Tapatalk
Hi,
It's been years that I've been living with the XT925 on CM11 JBBL and as I've been following latest developments on CM 12.1 and want to give it a try.
I've been searching for the past week on how to safely perform the bootloader upgrade so I can flash CM12.1. As it turns out there is a lot of disperse information on how to do it, followed by scary cases of soft bricked devices.
Current device status:
- Bootloader Unlocked
- Rooted
- CM11 M12 JBBL
- Everything works fine
What I already know:
- I have to Unroot my device
- Need to flash stock 4.1.2
- Must check if everything works once in stock
What I need help:
- Should I download OTA via the stock firmware?
- Should I flash stock recovery?
- Should I perform the update from the device or should I extract the OTA and change something and then flash it manualy?
- Is there any tutorial that I should've found on my searches?
On a sidenote: is there any chance of my bootloader to be relocked and/or loose any chance of future root access due to the OTA?
I believe that as people realise that CM12.1 is stable some noob friendly thread to the ancient JBBL's out there would be much apreciated.
Thanks in advance!
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
RikRong said:
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
Click to expand...
Click to collapse
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Can you find the firmware on MotoFirmware.com, when it's actually up?
Try this: http://motofirmware.center/files/
dirceucorsetti said:
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Click to expand...
Click to collapse
The only one firmware for xt925 available is from Canda Retail, here is the link