trying to flash offical Cyanogen - HTC One S

Hi, i recently rooted my phone. I flashed the venom rom and it worked okay the wifi and data ddint work at all and the camera did not work. So i was not satisfied with that rom so i wanted to switch to cyanogen official so i tryed to do this by geting the rom from offical cyanogen websiter and im sure it was the rite rom it was villa for htc one s nightly and i used cmw recovery to flash this i also cleared catch and data wipe before i flashed this ROM and it said it installed and next thing u no it i soft bricked my phone. the htc splash screen came then the rest was black screen and flashing home buttons thankfully i fixed this issue by using the offical recovery and mounting cd and using a diffrent ROM. So i really want this official Cyanogen 10,1 rom however it seems compliacted to get on from the other ROMS and i was wondering idf someone can give me some instructions and download links to get this ROM on my phone. Iam fully rotted with offical recovery and also iam running a custom ROM rite now that is dark jelly if that matters. much help would be appreciaited thank you very much. Also my htc one is S4.

Are you s off? You need to flash a kernel if not. And if your on a custom rom how can you be soft bricked? There's a cm10 thread in the dev section
Here http://forum.xda-developers.com/showthread.php?t=1799139

todscos and
Hey,
1 - Download the rom from the link striped121 gave you
2 - go to recovery
3 - Do all the wipes and do a factory reset
4 - flash your rom
5 - use this tool : http://forum.xda-developers.com/showthread.php?t=1604677 to flash the boot.img file. You can find it in the rom archive
6 - reboot
7- enjoy your rom
Ask me if you have some trouble

warzag said:
Hey,
1 - Download the rom from the link striped121 gave you
2 - go to recovery
3 - Do all the wipes and do a factory reset
4 - flash your rom
5 - use this tool : http://forum.xda-developers.com/showthread.php?t=1604677 to flash the boot.img file. You can find it in the rom archive
6 - reboot
7- enjoy your rom
Ask me if you have some trouble
Click to expand...
Click to collapse
thats wat i wa smostly confused about in that link there were so many download links i wasnt sure which one was the actual ROM but i think but to be sure the number 4 bullet on the download sections of that link the nightly link is the acutal ROM rite sorry iam real nub but yea i probably ddint flash kernal before but i just want recoformation that the nightly link is the actual ROM thank you

Hey,
You can download the latest nightly of CM 10.1 if you want !
I recommand you another rom based on CM 10.1 which is Codename Lungo : http://forum.xda-developers.com/showthread.php?t=2238880
Best rom I ever see

Hey guys it worked I just want to say thanks a lot for the help

Hey
I m glad it works ! Did you install codename lungo ?
Cya !
Sent from my One S using xda app-developers app

Related

[Q] Plz help Booting only in download mode

I placed Custom ROM [cm-7-20130201-NIGHTLY-s5670] in SD card and then after removing Sim card i booted my phone in recovery mode then wiped data and cache, and after that i applied update from that custom ROM.. it got stuck in ANDROID written on it.. i've waited for 40 mins and re-read the instructions.. then i found my mistake and tried to install custom Recovery CWM [beni_cwm-5_ext4_v2] by tj_styles.. and it blew my recovery mode also... now my phone is only booting in download mode. can i repair it.? plz help me dev :crying:
Flash back to gingerbread!
Flash back to Gingerbread with Odin.
Here a Video:
http://www.youtube.com/watch?v=zQ-f92hc8NE
Thanks for quick support..
FurFur_ said:
Flash back to Gingerbread with Odin.
Click to expand...
Click to collapse
first of all thanx for helping and
can i install already downloaded custom rom (cm7 nightly) instead of gingerbread?
yes.
First follow the instructions at the video.
then you can install cm7.
but first follow the video
akii.bh said:
...
...
and can i install already downloaded custom rom (cm7 nightly) instead of gingerbread?
Click to expand...
Click to collapse
* Flash Stock Gingerbread via Odin
* Then flash CWM recovery via Odin (One package)
* & then goto CWM of ur phone & flash Cyanogen.
Remember to format /system also if U R flashing Cyanogen for the 1st time...
Happy flashing...:thumbup:
Sent Via XDA™ Premium
To flash Cm7
U hav to first update ur fit to 2.3.x or gb.......
For dat use Odin.....
Der is tutorial to update ur fit to gb in YouTube.....just follow dat
To flash Cm7
Wipe data
Wipe cache
Wipe dalvik cache
Format system
mount system
Instal the zip file of ROM
Reboot......
PRESS THANX IF I HELPED U
vinayaksuresh said:
To flash Cm7
U hav to first update ur fit to 2.3.x or gb.......
For dat use Odin.....
Der is tutorial to update ur fit to gb in YouTube.....just follow dat
To flash Cm7
Wipe data
Wipe cache
Wipe dalvik cache
Format system
mount system
Instal the zip file of ROM
Reboot......
PRESS THANX IF I HELPED U
Click to expand...
Click to collapse
Hey Bro! Don't need 2 mount /system...!!!
Sent Via XDA™ Premium
Thnx Friends..! it's fixed and i m on CM7 Nightly by tjstyle..
Thanks to all... i've installed gingerbread 2.3.6 and then cm7 nightly....
and is ROM manager safe...? it is installed automatically with CM7 and i wish to try "Cyanogenmod 10 by Yajnavalkya" Can I install it like previous one or i have to uninstall ROM manager first?
akii.bh said:
Thanks to all... i've installed gingerbread 2.3.6 and then cm7 nightly....
and is ROM manager safe...? it is installed automatically with CM7 and i wish to try "Cyanogenmod 10 by Yajnavalkya" Can I install it like previous one or i have to uninstall ROM manager first?
Click to expand...
Click to collapse
Don't ever use ROM Mngr. or u'll end up bricking ur device. CM 7 includes it but don't touch it...
Flash CM 10 by yajnab like CM7. No need 2 to touch rom mngr.
Sent Via XDA™ Premium
Warning [rom manager]
Galaxy_Rohit said:
Don't ever use ROM Mngr. or u'll end up bricking ur device. CM 7 includes it but don't touch it...
Flash CM 10 by yajnab like CM7. No need 2 to touch rom mngr.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Yes! Dont you ever try to touch ROM Manager. [WARNING]. you will may end up with a BRICKED galaxy fit. (btw its supported by galaxy fit, but better is not to touch it) and one advise....is as soon as you boot in cm7, remove ROM manager..
and yes you can try CM 10 RC2 by yajanab..its good, and you can try CM10.1 by erikcas as well.
happy flashing
thnx for the warning, now m moving to cm 10
cosmickamal said:
Yes! Dont you ever try to touch ROM Manager. [WARNING]. you will may end up with a BRICKED galaxy fit. (btw its supported by galaxy fit, but better is not to touch it) and one advise....is as soon as you boot in cm7, remove ROM manager..
and yes you can try CM 10 RC2 by yajanab..its good, and you can try CM10.1 by erikcas as well.
happy flashing
Click to expand...
Click to collapse
i just opened it once and i didn't used any option of ROM manager.. thnx for the support guys.. now m moving to cm 10
I simply delete the rom manager apk from the zip file of the rom before flashing . It atleast makes some space in the /system
Sent from my GT-S5670 using xda premium
akii.bh said:
i just opened it once and i didn't used any option of ROM manager.. thnx for the support guys.. now m moving to cm 10
Click to expand...
Click to collapse
enjoy cm10. Stay Happy.
cosmickamal said:
enjoy cm10. Stay Happy.
Click to expand...
Click to collapse
To be very true Cm10.1 latest build is way better than Cm10 Rc2.. No offence.
Cm10.1 is smooth and the camera works also smooth video recording as compared to cm10.
check it your self.
Good work by both the devs (Erickas and Yajnab) :good:
Rohit02 said:
To be very true Cm10.1 latest build is way better than Cm10 Rc2.. No offence.
Cm10.1 is smooth and the camera works also smooth video recording as compared to cm10.
check it your self.
Good work by both the devs (Erickas and Yajnab) :good:
Click to expand...
Click to collapse
yeah i tried both. cm10 n 10.1 and i agree 10.1 is better than 10. and you pls try cm9 as well...its also very good. now i am eagerly waiting for an update to all these roms. right now on official cm7.
Sent from my GT-S5670 using Tapatalk 2

[URGENT HELP] Req. Cyanogenmod 9

My tab p6200 has been on a reboot loop for the last 1 week. I have tried to install almost all the ROM's (CM10, 10.1, stock ROMS) available and nothing seems to be working. The last ROM that worked for me was the CM9 and unfortunately the link to download it isnt working. I have tried to install an old version of CM9 (Wifi not working) and that seems to be working alright. I was hoping if one of you could direct me or provide a working link for CM 9.
cm-9-20120917-UNOFFICIAL-p6200.zip is the file I am looking for.\
Please Help
rratheesh_83 said:
My tab p6200 has been on a reboot loop for the last 1 week. I have tried to install almost all the ROM's (CM10, 10.1, stock ROMS) available and nothing seems to be working. The last ROM that worked for me was the CM9 and unfortunately the link to download it isnt working. I have tried to install an old version of CM9 (Wifi not working) and that seems to be working alright. I was hoping if one of you could direct me or provide a working link for CM 9.
cm-9-20120917-UNOFFICIAL-p6200.zip is the file I am looking for.\
Please Help
Click to expand...
Click to collapse
If me, i would like to solve bootloop 1st...to prevent my tab from having hardbrick..so what i do, i flash stock Honeycomb back...then go to stock recovery(3e recovery), n wipe data and cache...from do that, i will know my tab could start like normal or not..if normal, then i proceed to flash other rom..
Sent from my GT-P6200 using XDA Premium HD app

[Q] Bootloop with my Xperia U (on new rom: Xperiance v2.0 Lite)

Hi there. I have recently visited this website:
http://forum.xda-developers.com/showthread.php?t=2075878
Click to expand...
Click to collapse
in order to flash a new rom into my xperia U phone.
I have downloaded and followed the instructions carefully on how to install the Xperiance v2.0 Lite Rom. I've installed the Xperiance V2.0 Lite successfully but I am stuck in a bootloop.
At first, I've used the recommended version. Same outcome (i.e. bootloop). Then I've used a Custom version version (did not select the Rosemary font as this normally causes bootloop) but still I get the same outcome. I am not a noob at this. I have flashed many Roms before and all ended well except this.
What can I do? Please help me. Thanks.
Kind Regards,
kbarokut2010.
maybe kernel
maybe your installed ROM does not compatibe for you current kernel. try to download a compatible kernel for your rom and install it using fastboot.
[SXU] Fix the bootloop in Xperiance lite Rom on Xperia U
tutscrin said:
maybe your installed ROM does not compatibe for you current kernel. try to download a compatible kernel for your rom and install it using fastboot.
Click to expand...
Click to collapse
hey I faced this problem and now I am using the rom
I flashed 6.1.1.c.1.0 FTF then I rooted it and installed CWM amd flashed it
but the 6.1.1.c.1.0 cant be rooted u have to flash the 6.1.1.B.1.10 Kernel then root it by flash tool then reflash the 6.1.1.c.1.10 Kernel
now u rooted u just have to flash the rom and you r done
and for the 6.1.1.c.1.10 FTF http://forum.xda-developers.com/showthread.php?t=2029415
check this thread for rooting http://forum.xda-developers.com/showthread.php?p=35081457 #67
and also please can I have my first thanx from u if I helped u
haha, good job. welcome to xda.
[SXU] Fix the bootloop in Xperiance lite Rom on Xperia U
hey I faced this problem and now I am using the rom
I flashed 6.1.1.c.1.0 FTF then I rooted it and installed CWM amd flashed it
but the 6.1.1.c.1.0 cant be rooted u have to flash the 6.1.1.B.1.10 Kernel then root it by flash tool then reflash the 6.1.1.c.1.10 Kernel
now u rooted u just have to flash the rom and you r done
and for the 6.1.1.c.1.10 FTF http://forum.xda-developers.com/showthread.php?t=2029415
check this thread for rooting http://forum.xda-developers.com/showthread.php?p=35081457 #67
and also please can I have my first thanx I started new ​
May b the Rom is not for ur firmware.. First flash the right fw n then flash the rom..
Sent from my ST25i using xda app-developers app

[Q] Experiencing recovery bootloop

My device is Stock DDLF2 so I wanted to flash it with other custom roms hence I flashed it with CF ROOT(DDLF2_CFROOT-05-07-2012.tar) and I flashed the CM9 Alpha14 rom it was working good, then I thought I should flash CM10 based roms so I tried to flash Slim Bean and as per the installation instruction I had to flash first CM10 Alpha4(http://forum.xda-developers.com/showthread.php?t=1868074) so I downloaded the rom and tried to flash while flashing when it just starts to load package it just reboots into recovery where I cannot do anything, though I remove battery and try to switch it ON after some time same thing, thankfully my download mode works, so what I do is I flash the stock rom again on top of KPE following the thread below:
http://forum.xda-developers.com/showthread.php?t=1133787
no matter how much I try I am just able to get back my DDLF2 stock but could not get past the abrupt reboot into recovery thing. I tried directly installing
Slim Bean
http://forum.xda-developers.com/showthread.php?t=2024076
as well as
ENHDRIOX 13.2.9
http://forum.xda-developers.com/showthread.php?t=2043870
but same thing, so i tried installing CM9 A14(http://forum.xda-developers.com/showthread.php?t=1449649) back where I can flash it without any problem and starts just fine, but when I try to reboot into recovery same recovery bootloop. I tried all of those back and forth I don't know how many times but same results. I'm afraid I might brick my phone by doing it so many times. I even tried installing the crackerizer-kernel-final.zip thinking that the kernel that currently i'm might have not supported the kernels in the custom roms that I've been trying to flash but not luck so far.
Please Help, desperately in need of some expert advise.
Man just flash kpe/lf2/root lf2/cm10 by Iosconosciuto( this rom fixed the recovery bootloop)/ whatever jb based rom of your taste.
Sent from my GT-I9003 using xda premium
acuicultor said:
Man just flash kpe/lf2/root lf2/cm10 by Iosconosciuto( this rom fixed the recovery bootloop)/ whatever jb based rom of your taste.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Sure let me give it a try, till now I I've tried flashing CM10 A4 from Dhiru1602, thanks
acuicultor said:
Man just flash kpe/lf2/root lf2/cm10 by Iosconosciuto( this rom fixed the recovery bootloop)/ whatever jb based rom of your taste.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Is this the one you're talking about?
http://forum.xda-developers.com/showthread.php?t=2138707
or this one?
http://forum.xda-developers.com/showthread.php?t=2192613
if it is not either one of them, can you please suggest me the link to download the files, moreover the one which you're suggestion is it bug free, like the camera front and back works?
what about the bluetooth and wifi?
and USB in PC?
Thanks for the response
The first one is the rom i suggest and yes all work fine both cameras,wifi,bt and usb conection to pc.
Sent from my GT-I9003 using xda premium

[Q] how to install pac rom on galaxy tab 2 7" P3110

Hi !
This may be a frequent question and I'm so sorry for that .
I'm suffering from battery problem ( fast drain ) two weeks ago . Someone advice me to install a rom with reported good life battery . So I made a small search on the net and many people advice me to install PAC ROM . But I want to ask those xho install it some question :
Is it really a good rom
Does it improve life battery ?
Does it take lot of memory ?
Does it require lot of RAM memory and CPU ?
What are the advantages and drawbacks of using this rom ?
Am I forced to all data ( pictures , apps etc.. ) while installing it ?
And finally how to download it and how to install it ?
My device is samsung galaxy tab 2 7" P3110 . Thanks previously and sorry for english mistake
abuyussuf4 said:
Hi !
This may be a frequent question and I'm so sorry for that .
I'm suffering from battery problem ( fast drain ) two weeks ago . Someone advice me to install a rom with reported good life battery . So I made a small search on the net and many people advice me to install PAC ROM . But I want to ask those xho install it some question :
Is it really a good rom
Does it improve life battery ?
Does it take lot of memory ?
Does it require lot of RAM memory and CPU ?
What are the advantages and drawbacks of using this rom ?
Am I forced to all data ( pictures , apps etc.. ) while installing it ?
And finally how to download it and how to install it ?
My device is samsung galaxy tab 2 7" P3110 . Thanks previously and sorry for english mistake
Click to expand...
Click to collapse
Borther. I would like to quote one thing first of all; all kitkat based ROMs are battery suckers. So you will not get good battery backup as you might have seen in 4.1.2 or 4.2.2. Xposed framework consumes lot of RAM,i prefer not to use it. PAC ROM is just like another KITKAT ROMs that provides loads of features but with an inefficient battery backup. You will see huge battery drain yourself. I did tried all Kitkat based ROMs. Even all kitkat based ROMs have shuttering/noise sounds while playing some games like Real-Racing 3 etc. I suggest to go with Stock ROM 4.2.2 based on your region or cm 10.2 based ROMs(if available). Root it(if stock) and remove all the samsung bloatwares from it. Then you will not get any kind of battery drain or Lag while playing high-end games. But ultimately choice is all yours.
Although ROM Flashing/Installation instructions are already available in corresponding Threads.But i shall still give you a brief on it :
1) First root your Device(if not rooted) ..... http://forum.xda-developers.com/showthread.php?t=1880010
2) Flash Custom recovery(in case you want to flash any custom ROM like PAC) http://forum.xda-developers.com/showthread.php?t=2548257
3) Reboot into Custom recovery(Phillz or clockworkmod or TWRP)
4) Wipe data/factory reset(in Phillz wipe to install new ROM). Note: this will remove all data/apps from your previous ROM.But Data for some of the Games/apps remains intact. If you are using any other recovery other than Phillz. You will have to format /system as well from Mount and storage
5) flash ROM
6) flash Gapps
7) wipe cache partition.
8) Wipe Dalvik cache from advanced tab in Phillz(as i have mostly used this recovery to flash ROMs)
In case you wish to overclock you device. there are custom kernels available like Next or Agni.Please look for the flashing instructions in the corresponding threads. If you still run into some issues please let me know.
lokesh.3440 said:
Borther. I would like to quote one thing first of all; all kitkat based ROMs are battery suckers. So you will not get good battery backup as you might have seen in 4.1.2 or 4.2.2. Xposed framework consumes lot of RAM,i prefer not to use it. PAC ROM is just like another KITKAT ROMs that provides loads of features but with an inefficient battery backup. You will see huge battery drain yourself. I did tried all Kitkat based ROMs. Even all kitkat based ROMs have shuttering/noise sounds while playing some games like Real-Racing 3 etc. I suggest to go with Stock ROM 4.2.2 based on your region or cm 10.2 based ROMs(if available). Root it(if stock) and remove all the samsung bloatwares from it. Then you will not get any kind of battery drain or Lag while playing high-end games. But ultimately choice is all yours.
Although ROM Flashing/Installation instructions are already available in corresponding Threads.But i shall still give you a brief on it :
1) First root your Device(if not rooted) ..... http://forum.xda-developers.com/showthread.php?t=1880010
2) Flash Custom recovery(in case you want to flash any custom ROM like PAC) http://forum.xda-developers.com/showthread.php?t=2548257
3) Reboot into Custom recovery(Phillz or clockworkmod or TWRP)
4) Wipe data/factory reset(in Phillz wipe to install new ROM). Note: this will remove all data/apps from your previous ROM.But Data for some of the Games/apps remains intact. If you are using any other recovery other than Phillz. You will have to format /system as well from Mount and storage
5) flash ROM
6) flash Gapps
7) wipe cache partition.
8) Wipe Dalvik cache from advanced tab in Phillz(as i have mostly used this recovery to flash ROMs)
In case you wish to overclock you device. there are custom kernels available like Next or Agni.Please look for the flashing instructions in the corresponding threads. If you still run into some issues please let me know.
Click to expand...
Click to collapse
thank you very much lokesh.3440 . So I'm not going to install it because all I want is a good battery life ! Actually my device is rooted ( SuperSU ) and I still have 760 ram.
I'm n amateur android user . I started using android a month ago so would you please help me to do a Flash custum recovery . I downloaded PhilZ Touch Recovery 6.22.9 files ( P3110 and odin files ) from this link :
http://forum.xda-developers.com/showpost.php?p=51314025&postcount=296&nocache=1&z=8854052119422704
But I don't understand what to do next ! Would you please help me ?
You know the procedure to flash through odin,, if no,,, then download Odin and flash phillz-xx.tar.md5 as pda,, make sure you have only one option restart checked inside odin,,, after restart it will take you to custom recovery directly ,,, please do these steps first,, I shall help you further step by step
Sent from my GT-P3100 using Tapatalk
lokesh.3440 said:
You know the procedure to flash through odin,, if no,,, then download Odin and flash phillz-xx.tar.md5 as pda,, make sure you have only one option restart checked inside odin,,, after restart it will take you to custom recovery directly ,,, please do these steps first,, I shall help you further step by step
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
What I understand is that I have to open odin and only check auto rebbot than press pda and choose the md5 file . After that I should press start and when It complete , I should restart my device ! isn't it ?
And what's next please ?
Yes, ,, you are right,,, are you on phillz recovery after restart
Sent from my GT-P3100 using Tapatalk
fine it works ^^ thanks someone advice me to install Slim Rom ! I'm just looking for a rom wich have good battery life and didin't use a lot of Ram ! Any suggestion ?
Why are you biased towards a kitkat rom,, if you still wanna flash slimkat or any other kitkat nased rom,try my earlier steps starting from 3rd
Sent from my GT-P3100 using Tapatalk
lokesh.3440 said:
Why are you biased towards a kitkat rom,, if you still wanna flash slimkat or any other kitkat nased rom,try my earlier steps starting from 3rd
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
A junior Member said that he starts using pac rom and it is okay for ram usage ! Am still waiting for his answer about battery drain . I hate kitkat roms ! I just need a rom wich increases battery life and provides less ram usage !
I find old version of slim rom : 4.2.x and 4.3.x ! Would one of those be helpful in my case?
Yes,you can go for sungsonic hd or any cm10.2 based rom
Sent from my GT-P3100 using Tapatalk
lokesh.3440 said:
Yes,you can go for sungsonic hd or any cm10.2 based rom
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Okay thank you I'll see what to do ^^
I used the official CyanogenMod 10.1.3 stable rom for a while and that had AMAZING battery life. I had 5 days usage on moderate to heavy usage.
Thats impossible galaxy tab 2 have only 4000mAh so it's impossible
I have installed custom ROM of Beanstalk 4.4.2 Os in Galaxy Tab 2, every thing running good except my WiFi direct is not working what to Dom know plz hlp me developers
Sent from my GT-P3100 using XDA Premium 4 mobile app
---------- Post added at 09:33 AM ---------- Previous post was at 09:28 AM ----------
If possible send me instruction to my mail I'd
[email protected]
Plz help me
Sent from my GT-P3100 using XDA Premium 4 mobile app

Categories

Resources