Hoping to get some direction or assistance here.
I need to send my SGS3 back to Verizon for a faulty USB (intermittent charging)
I was rooted with stock ROM, but I factory reset and now not rooted so Mobile ODIN doesn't work, and Voodoo says I am rooted, Root Checker says I am not.
When the device is connected to the Windows 7 PC, it often comes up "Device not recognized". But when it does connect, no folders or access to internals show up. Odin doesn't show connected, Root Tool Kit won't show it in Debugging mode.
Interesting too that although that is happening, when I click the "eject devices" it shows as SCH-i535 in that menu, but when it is in Download mode, it shows up as MSM8960 as the device connected. The only two things that show I messed with the phone are the CUSTOM padlock on boot screen and in ABOUT PHONE it shows as Modified (could I chance it?).
Any suggestions on how I may be able to get Odin on PC to connect, or to somehow get the root to work again so I can use Mobile Odin? Oh, and Kies doesn't work via USB, but does over WiFi.
Thanks.
Looks like I am going to have to try to connect adb over sshdroid. Anyone ever do this? Also, has anyone used a manual root method?
Alright, so SSH isn't helping, anything I can us the stock recovery to work around this? Please help, I need to get this back to stock with the week. Thanks
Success. Somehow, z4root was able to temp root for me after 2 hours of nothing. Used Mobile ODIN and back to 4.0.4 with no padlock and everything official. Mods may close this.
Nice job!
Sent from my SCH-I535 using xda app-developers app
Related
ok, trying to install one-click root on my Epic, i have up-to-date drivers installed, USB debugging is checked, my computer gives me the option to mount and it reads my device. when I go to the run.bat command screen, I keep getting the message 'cannot locate device, unplug USB, re-plug and press enter.' when I do that I get 'aborting script, phone still not connected' message. can anyone point me in the right direction or tell me what I'm missing, any help would be greatly appreciated.
VB561 said:
ok, trying to install one-click root on my Epic, i have up-to-date drivers installed, USB debugging is checked, my computer gives me the option to mount and it reads my device. when I go to the run.bat command screen, I keep getting the message 'cannot locate device, unplug USB, re-plug and press enter.' when I do that I get 'aborting script, phone still not connected' message. can anyone point me in the right direction or tell me what I'm missing, any help would be greatly appreciated.
Click to expand...
Click to collapse
Try to do a battery pull on the phone and try that. If that does not work, do a battery pull and reset your computer and see if that helps.
Not sure what OS you are running but the best thing is to do on Win XP.
dito33
Can you tell us the complete verbage of the error? I ran into a problem because I did not LITTERALLY UNZIP the rar file before running it. Kept saying the phone was not connected..but when I looked closer it was failing because the bat file was trying to run a piece of the program and for some reason it was failing on it. COMPLETELY AND LITTERALLY unzipped the rar to my computer and then ran it (making sure the phone was connected and in usb debug mode) and was rooted in a matter of minutes. hope this helped a little... good luck
Sent from my SPH-D700 using XDA App
Try plugging the Epic into a mobo usb port.
VB561 said:
ok, trying to install one-click root on my Epic, i have up-to-date drivers installed, USB debugging is checked, my computer gives me the option to mount and it reads my device. when I go to the run.bat command screen, I keep getting the message 'cannot locate device, unplug USB, re-plug and press enter.' when I do that I get 'aborting script, phone still not connected' message. can anyone point me in the right direction or tell me what I'm missing, any help would be greatly appreciated.
Click to expand...
Click to collapse
Your computer gives you an option to mount? If you have ADB debug enabled you should see something pop up in your device manager, but I'm not so sure you should get any kind of mounting pop-up.
Make sure you have all of the correct drivers installed for your OS, and try it again running each command seperately from the batch file. Then post here which command is coming back unsuccsessful so I can pinpoint the problem better.
Sent from my soon to be 1.6ghz Epic 4G
thanks very much for the responses guys, the battery pull (along with restarting my computer about 4 times) finally got it to do its thing. don't know why it had to be such a pain but i'm just glad i got it to work. again, thank you all kindly for input.
Sent from my rooted SPH-D700 using the internets
I am having the same problem now for an hour or so. Tried everything I can think of , tried the all in one clockwork , used a different cable....i can hear my computer make that sound when I plug the phone in , and also when I unplug it. Just trying to get clockwork on here , ive read and read and read all the threads I can find. Got good drivers , windows xp. Rebooted laptop and phone at least 20 times ...dont know what else to try
Sent from my SPH-D700 using Tapatalk
Look in your device manager on your pc while your phone is connected with usb debugging and make sure there is no question mark next to Android ADB device. It needs to recognize this driver for it to connect.
HI
Hi i had that same issue an i went to the samsung official website becaue my phone can't connect to my pc i couldn't see my sd card pop up so the guy say my phone was defective so im thinking you have the same issue as me but samsung is fixing my phone now for free an free shipping i hope you still have warranty on your epic an they flashing a new rom an software on it for me they say to fix gps an wifi issues i had too
Got it to work, it was a driver issue apparently. Downloaded drivers again, completely removed old drivers. Reboot PC, make sure phone isnt connected yet. After reboot, install drivers, reboot again. I also had my phone turned off this whole time. When PC came back up , turn phone back on, connect using one of the main USB ports, not one in the front or anything. You should see windows detect and install the software. Then I ran the all in one clockwork , and here I am now fully rooted, syndicate rom , so much better than stock...hope you get it working! I definitely almost gave up a few times
Sent from my SPH-D700 using XDA App
Hi all,
I've got a Nexus S 4G CDMA Sprint phone running Stock ICS 4.0.4 IMM76D.
My bootloader is unlocked from previous roots and whatnot.
My problem is that my phone is not being recognized by my computer at all. We're talking complete nonrecognition. No yellow triangle in device manager, no pop-ups, nothing. This phone will just not be read by my computer! I've tried different cords, different computers, re-installation of drivers after resetting my computer, installed PDA net, did a factory reset on the phone, I've literally been on Google for hours upon hours upon hours trying to figure this out and can't figure out why the computer is not recognizing the phone and why the phone is not allowing me to put it into usb mounting. It is however, charging via the computer and wall plug. I can get into stock 3e android recovery, fastboot using V-Up and Power and I can get it into download mode. It is NOT recognized in any modes by the computer nor other computers including my Linux box. The phone states that the usb control initializes but then ends a moment later. I am thinking this is a hardware issue but that leaves me with two issues:
If I was to go to Sprint to have it fixed they would realize my bootloader was unlocked thus voiding the warranty and I'd feel like quite an idiot at the store
If it is hardware related why is the charge working on the device.
I have also tried to bend up the usb plate to make it touch the pins better but that did not help at all. I am at my wits end and really need some help here, I've done everything I could find on Google and here plus more. I want to just return it but with the bootloader unlocked this is really not a possibility. I am looking for help to either become able to lock the bootloader without it having to be connected via the computer so I can then get it fixed if it is hardware related or if I can get the darn thing to be read by the computer once more. so yea, this is where I am at and I would appreciate it so much if someone could help me out, thanks guys!!!
Wireless adb in playstore should help.
Sent from my Nexus S 4G using XDA
That would be perfect! Only problem is that it requires root access on the phone which I am unable to obtain because I cannot access the phone. Is there a way to root the phone without having to connect it via the computer? Something like an update.zip with files able to be flashed through android recovery 3e? If I can get root access than wireless adb would be perfect.
*ultimately if I could remove signature checking in Android Recovery 3e that would work so I could in turn try to root the phone and install a different recovery to then try a different rom to see if that in turn fixes the issue.
Ebicoustic said:
That would be perfect! Only problem is that it requires root access on the phone which I am unable to obtain because I cannot access the phone. Is there a way to root the phone without having to connect it via the computer? Something like an update.zip with files able to be flashed through android recovery 3e? If I can get root access than wireless adb would be perfect.
*ultimately if I could remove signature checking in Android Recovery 3e that would work so I could in turn try to root the phone and install a different recovery to then try a different rom to see if that in turn fixes the issue.
Click to expand...
Click to collapse
You might be able to download your rom of choice and rename it update.zip. I'm not sure if it will flash though....someone else chime in if I'm wrong. You can use wireless file transfer if needed.
Sent from my Nexus S 4G using XDA
Yea I've tried that, everything gets shot down by the recovery with a E:Signature Verification Failed. Thank you for your help so far but I don't think this is something that is going to be helped. I've put in a ticket to Samsung for a repair under it's warranty. In the past I've sent in a rooted phone and they've fixed it so I think I'm going to give that a shot. Just don't want to be without a phone for 2+ weeks.
Well good luck...you are running stock unrooted so it shouldn't matter. It is a dev phone for damn sake. Sorry couldn't help.
Sent from my Nexus S 4G using XDA
Well if you want to download a custom rom... Since you are on this forum. Download any rom (preferably CM9 since its quite good from my experience). Flash the stable version and wait till everything is completed. Now when you flash make sure you download a recovery...eg ClockWorkMod Recovery from google market. You should now have a custom rom installed and download wireless adb as chappy said. See if that works
Im looking for help on fixing my SGS4G.
Here is the current list of problems:
1. Phone isnt recognized when i plug it into any computer (i download all the drivers, Kies and Odin both cant find it, and 1 out of every 10 tries my computer will recognize the microsd card and treat it like a normal sd card)
2. My Dialer and Messages will open for 3-4 seconds and close without a force close screen or anything. Obviously this is really annoying :|
3. Im rooted but trying to go back to stock to redo this whole process over is becoming a pain.
4. When trying to flash a custom rom from ROM manager i get the signature verification failed message.
Im about to try the heimdall one-click package to get back to stock and see if that works...idk if it will find my phone though.
My system info:
Firmware: 2.3.6
Baseband: T959VUVKJ6
Kernal: 2.6.35.7-T959VUVKJ6-CL694130
Build: GINGERBREAD.VUVKJ6
If i manage to get back to stock/unrooted where do you guys suggest i go from there? im kind of out of the loop as far as where we are with ICS or jellybean or any of that :|
Thanks a bunch in advance and sorry if this is nooby
Also:
adb devices shows nothing :\
USBDview shows nothing for my phone...i plug it in with debugging on and all it does is charge my phone
First problem. Do not use ROM manager. Download ROM zips and flash through CWM/TWRP.
Have you tried using a different cable when connecting to PC? Some cheaper cables do not work well, or at all. I have a blackberry cable that I only use for this.
Have you tried alternate USB ports. Sometimes that may be this issue as well. Also, some people have better luck with Odin, while others have better luck with heimdall. You may want to try the alternate and see if you have the same issue.
I would follow the guides on going back to stock. You may have old conflicting drivers so you may need to completely remove old ones first.
Sent from my SGH-T959V using xda app-developers app
I use the cable that came with it and the one that comes with my girlfriends phone which is a different phone with no problems. You might want to mess with the usb configuration on your computer
Sent from my SGH-T959V
As far as the dialer and messenger app backing out automatically that was an issue with all bml gingerbread roms. I think there was a fix but I'm not sure. Cm7 is mtd based gingerbread and it doesn't have that problem.
Sent from my SGH-T959V using xda app-developers app
Jiggly,
Ive tried every USB port on my desktop and my laptop. Both of them im reinstalled the drivers on. On my desktop the moment I plug it in it says the device malfunctioned.
Usbdview didn't show anything like the guides said it should. (HTC something...there was.nothing)
ROM manager is just on my phone ive never actually used it other than to boot to recovery
Sent from my SGH-T959V using xda app-developers app
The phone goes into download mode but heimdall still doesnt detect it, windows still tells me the device cant be recognized and im out of ideas.
i went into regedit and deleted all the samsung folders and reinstalled the drivers fresh but im still not getting anywhere...
flash the blastoff kernel, or some custom GB kernel.
Let it convert to ext4, it'll take 10 minutes,
flash a rom through CWM which you will now have.
Im missing something here...but i cant flash anything as everything is unsigned and i cant get out of 3e recovery. ODIN, heimdall etc still wont find my phone from my computer(s) and everything i attempt to flash is unsigned.
Can you boot into your ROM?
boot into my rom as in use my phone? yes the phone functions fine with the exception of not being able to plug it into my computer to tether it/use mass storage and these darn auto close problems with my dialer/messages
Well i was able to flash a new kernel with CWM then upgraded to cm9.
didnt realize contact sync didnt work so i lost all that info :\ computer still says the device malfunctioned but my messaging and dialer apps dont auto close now lol
so im trying to download some files on my compo to transfer to phone so i can unroot it and send it back to verizon. im on the latest beanstalk rom and when i hook up my phone to the comp, its saying unable to recognize the phone. any suggestions on what to do? i have debugging turned on in the developer options as well. thanks
Check drivers and try battery pull
ive restarted the phone and i havent had trouble in the past but ill double check the drivers. thanks
figured it out. its because i have kies installed. tried returning to stock through heimdall but was having an issue and installed kies for that. thanks though
I tell you what, I'm not a big fan of MTP especially with ubuntu. I had issues mounting, until i figured it out in Qualcomm usb settings in hidden menu. You would think our phone would mount easily out of the box.
sjpritch25 said:
I tell you what, I'm not a big fan of MTP especially with ubuntu. I had issues mounting, until i figured it out in Qualcomm usb settings in hidden menu. You would think our phone would mount easily out of the box.
Click to expand...
Click to collapse
For awhile I had no issue. Even after I realized that I had kies installed and uninstalled it, still had issues mounting it. Couldn't get it and couldn't get the file I need to flash in mobile odin. I have an old Mac btw running 10.5.8. I'm going to have to use a friend's comp to both root my new phone and transfer a stock Rom to return my phone to factory.
Sent from my SCH-I535 using Tapatalk 4
Hi,
my friend's Nexus S was stuck in a bootloop. i went into recovery mode and hard reset the phone, so that the phone would come back to stock. however, the phone was being reset when the battery of the phone came off, switching it off.
the phone fails to start. there is no response when i try charging it. Also, it does not go into DOWNLOAD mode or FASTBOOT, so i cant even run any utilities to flash the stock rom back. adb commands as well as the nexus toolkit show that there is no device connected.
can anybody suggest me what to do?? i was gonna try odin but i read somewhere that it is only useful for custom recoveries, not to flash stock roms.
i've gotten some usb drivers mentioned at some thread, saying i would have to update my 'android' device listed in the device manager using them, but i cant seem to find any device mentioned in my device manager either.
any suggestions as to what i should do??
Morphie said:
Hi,
my friend's Nexus S was stuck in a bootloop. i went into recovery mode and hard reset the phone, so that the phone would come back to stock. however, the phone was being reset when the battery of the phone came off, switching it off.
the phone fails to start. there is no response when i try charging it. Also, it does not go into DOWNLOAD mode or FASTBOOT, so i cant even run any utilities to flash the stock rom back. adb commands as well as the nexus toolkit show that there is no device connected.
can anybody suggest me what to do?? i was gonna try odin but i read somewhere that it is only useful for custom recoveries, not to flash stock roms.
i've gotten some usb drivers mentioned at some thread, saying i would have to update my 'android' device listed in the device manager using them, but i cant seem to find any device mentioned in my device manager either.
any suggestions as to what i should do??
Click to expand...
Click to collapse
Something like this happened to me a week ago. I have Nexus S 4G. So, I ordered USB Jig from usbjig.com and now I have download mode. It worked! :laugh:
You can buy USB Jig from that site, or build it yourself, or borrow it from someone.