Database Info

MIUI 2.7.27 Kernel installation problem [SOLVED - flashing new kernel works]

Hey. Im trying to install any Sense based kernel but everytime I'm getting an error.
My Sensation is S-OFF and I'm on newest firmware 3.33.401.106. 4EXT is 1.0.0.5 RC5
It seems that is a problem since MIUI 2.7.13 and there is the same error on 2.7.20.
OK, is there any solution for this ?
Log from Bricked kernel 1.4 Aroma installer via 4EXT:
Cheers!
Code:
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : Bricked-Kernel-3.0
ROM Version : 1.4
ROM Author : show-p1984\bricked.de
Device : HTC Sensation (pyramid)
Start at : Tue Jul 31 13:51:11 2012
-Checking Model ID
-Success!
-Model ID - HTC Pyramid
-Ok to proceed
Welcome to Bricked-3.0 by show-p1984
Extracting files ...
Extract: /tmp/badass.sh
Extract: /tmp/cmdline.sh
Extract: /tmp/compatibility.sh
Extract: /tmp/dd
Extract: /tmp/mkbootimg
Extract: /tmp/mkbootimg.sh
Extract: /tmp/modclean.sh
Extract: /tmp/reboot.sh
Extract: /tmp/scheduler.sh
Extract: /tmp/sweep2wake.sh
Extract: /tmp/unpackbootimg
Extract: /tmp/zImage
Deleting Old Modules...
about to run program [/sbin/busybox] with 3 args
about to run program [/tmp/modclean.sh] with 1 args
Copying New Modules
Copying thermald.conf
Copying post_boot.sh...
Copying ZRAM enabler...
Setting permissions...
Extract: /system/etc/init.d/90zram
Extract: /system/etc/init.d/91tun
Extract: /system/etc/init.qcom.post_boot.sh
Extract: /system/lib/modules/bcm4329.ko
Extract: /system/lib/modules/bcmdhd.ko
Extract: /system/lib/modules/cifs.ko
Extract: /system/lib/modules/kineto_gan.ko
Extract: /system/lib/modules/msm-buspm-dev.ko
Extract: /system/lib/modules/spidev.ko
Extract: /system/lib/modules/tun.ko
Running compatibility checks...
about to run program [/tmp/compatibility.sh] with 1 args
Setting badass configuration...
about to run program [/tmp/badass.sh] with 1 args
Pull the boot.img from your phone...
about to run program [/tmp/dd] with 3 args
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.550293 seconds, 29.1MB/s
Extract boot.img...
about to run program [/tmp/unpackbootimg] with 3 args
BOARD_KERNEL_CMDLINE çąˆÜh!śv®Ů‘â.9îŢFqîüąK·ˇç–´
BOARD_KERNEL_BASE 647dc77e
PAGE_SIZE -1901623691
Error: wrong pagesize: -1901623691
run_program: child exited with status 1
Searching for this zip on the sdcard...
(this may take a few seconds)
about to run program [/tmp/cmdline.sh] with 1 args
sed: /tmp/boot.img-cmdline: No such file or directory
cat: can't open '/tmp/boot.img-cmdline': No such file or directory
cat: can't open '/tmp/boot.img-cmdline': No such file or directory
Activating sweep2wake...
Deactivating HTC screenshot (PWR+HOME)...
(Use AOSP instead: Hold Vol.down+PWR for about a second)
about to run program [/tmp/sweep2wake.sh] with 1 args
Setting chosen scheduler...
about to run program [/tmp/scheduler.sh] with 1 args
Repack boot.img with Bricked &
changing the cmdline of the kernel...
Installing kernel...
about to run program [/tmp/mkbootimg.sh] with 1 args
cat: can't open '/tmp/boot.img-base': No such file or directory
usage: mkbootimg
--kernel <filename>
--ramdisk <filename>
[ --second <2ndbootloader-filename> ]
[ --cmdline <kernel-commandline> ]
[ --board <boardname> ]
[ --base <address> ]
-o|--output <filename>
run_program: child exited with status 1
Flashing New boot.img...
script aborted: assert failed: write_raw_image("/tmp/newboot.img", "boot")
assert failed: write_raw_image("/tmp/newboot.img", "boot")
Installer Error (Status 7)

Did you try a fresh download? First download could have gotten corrupted? This happened to me once when flashing a Rom , installation was aborted. I did another download of the file, flashed the new download and it worked perfectly then. You can give it a try and see. If that helps at all. It worked for me when my installation was aborted. For me, something corrupted my first download. Perhaps this also happened to you? It wouldn't hurt to try. If you continue to get the error after the fresh download then It's a different issue . Best of luck to you and I hope you get your issue resolved Best wishes.
Sent from my HTC Sensation 4G using xda premium

xoresiesi said:
Hey. Im trying to install any Sense based kernel but everytime I'm getting an error.
My Sensation is S-OFF and I'm on newest firmware 3.33.401.106. 4EXT is 1.0.0.5 RC5
It seems that is a problem since MIUI 2.7.13 and there is the same error on 2.7.20.
OK, is there any solution for this ?
Log from Bricked kernel 1.4 Aroma installer via 4EXT:
Cheers!
Code:
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : Bricked-Kernel-3.0
ROM Version : 1.4
ROM Author : show-p1984\bricked.de
Device : HTC Sensation (pyramid)
Start at : Tue Jul 31 13:51:11 2012
-Checking Model ID
-Success!
-Model ID - HTC Pyramid
-Ok to proceed
Welcome to Bricked-3.0 by show-p1984
Extracting files ...
Extract: /tmp/badass.sh
Extract: /tmp/cmdline.sh
Extract: /tmp/compatibility.sh
Extract: /tmp/dd
Extract: /tmp/mkbootimg
Extract: /tmp/mkbootimg.sh
Extract: /tmp/modclean.sh
Extract: /tmp/reboot.sh
Extract: /tmp/scheduler.sh
Extract: /tmp/sweep2wake.sh
Extract: /tmp/unpackbootimg
Extract: /tmp/zImage
Deleting Old Modules...
about to run program [/sbin/busybox] with 3 args
about to run program [/tmp/modclean.sh] with 1 args
Copying New Modules
Copying thermald.conf
Copying post_boot.sh...
Copying ZRAM enabler...
Setting permissions...
Extract: /system/etc/init.d/90zram
Extract: /system/etc/init.d/91tun
Extract: /system/etc/init.qcom.post_boot.sh
Extract: /system/lib/modules/bcm4329.ko
Extract: /system/lib/modules/bcmdhd.ko
Extract: /system/lib/modules/cifs.ko
Extract: /system/lib/modules/kineto_gan.ko
Extract: /system/lib/modules/msm-buspm-dev.ko
Extract: /system/lib/modules/spidev.ko
Extract: /system/lib/modules/tun.ko
Running compatibility checks...
about to run program [/tmp/compatibility.sh] with 1 args
Setting badass configuration...
about to run program [/tmp/badass.sh] with 1 args
Pull the boot.img from your phone...
about to run program [/tmp/dd] with 3 args
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.550293 seconds, 29.1MB/s
Extract boot.img...
about to run program [/tmp/unpackbootimg] with 3 args
BOARD_KERNEL_CMDLINE çąˆÜh!śv®Ů‘â.9îŢFqîüąK·ˇç–´
BOARD_KERNEL_BASE 647dc77e
PAGE_SIZE -1901623691
Error: wrong pagesize: -1901623691
run_program: child exited with status 1
Searching for this zip on the sdcard...
(this may take a few seconds)
about to run program [/tmp/cmdline.sh] with 1 args
sed: /tmp/boot.img-cmdline: No such file or directory
cat: can't open '/tmp/boot.img-cmdline': No such file or directory
cat: can't open '/tmp/boot.img-cmdline': No such file or directory
Activating sweep2wake...
Deactivating HTC screenshot (PWR+HOME)...
(Use AOSP instead: Hold Vol.down+PWR for about a second)
about to run program [/tmp/sweep2wake.sh] with 1 args
Setting chosen scheduler...
about to run program [/tmp/scheduler.sh] with 1 args
Repack boot.img with Bricked &
changing the cmdline of the kernel...
Installing kernel...
about to run program [/tmp/mkbootimg.sh] with 1 args
cat: can't open '/tmp/boot.img-base': No such file or directory
usage: mkbootimg
--kernel <filename>
--ramdisk <filename>
[ --second <2ndbootloader-filename> ]
[ --cmdline <kernel-commandline> ]
[ --board <boardname> ]
[ --base <address> ]
-o|--output <filename>
run_program: child exited with status 1
Flashing New boot.img...
script aborted: assert failed: write_raw_image("/tmp/newboot.img", "boot")
assert failed: write_raw_image("/tmp/newboot.img", "boot")
Installer Error (Status 7)
Click to expand...
Click to collapse
You will get error status 7 with every kernel out there for the sensation if you're running MIUI 2.6.13 or above, after trying them all I have yet to find one that works.

I've tried many kernels I have with the same result. There is for sure no download/CRC error. It's an action that MIUI took to "secure" boot.img but I don't know why. This needs deeper investigation what exactly is changed and causing the problem.
There is the same on MIUI 2.8.3 and probably will be the same with new version. I wrote to MIUI about this and I mention this problem is discussed on forums worldwide but probably this will change nothing. So, it's on us to find the solution I think.

Guys.
There is a very simple way to get rid of this f*** secured boot.img in new MIUI.
I am right now on MIUI 2.8.10 and Bricked kernel 1.4 with lovely Sweep2Wake and Badass governor. Take a look at the screenshot.
[sorry, I can't post outside links, <10 posts ]
Code:
s12.postimage.org/jp3yctvd9/Screenshot_2012_08_10_20_10_07.png
How to do it?
1. Download boot.img from there ->
Code:
sendspace.com/file/y9olql
[sorry, I can't post outside links, <10 posts ]
2. Install 4EXT Recovery
3. Replace original boot.img in your MIUI Rom .zip package by the one you donwloaded.
4. Flash ROM file with replaced boot.img
5. Run your ROM/reboot - it will reboot again to flash update for boot partition.
6. GO back to 4EXT Recovery.
7. Flash your Sense kernel (I've used bricked 1.4)
8. Have fun
Hope this helps, it is really simple.

[Q] Not able to install Kernel 3.3 -assert failed: write_raw_image("/tmp/newboot.img)

[Q] Not able to install Kernel 3.3 -assert failed: write_raw_image("/tmp/newboot.img)
Hi There,
I am a new member to this forum and not as much techie as you guys.
I have HTC sensation 4g rooted and unlocked bootloader. I am getting error while flashing the latest Kernel 3.3, below is the error.
assert failed: write_raw_image("/tmp/newboot.img", "boot")
E:Error in /sdcard/(pfad zur kernel.zip)
(Status 7)
My current stock Android version Ice Cream 4.03 is upgraded to CM10. After upgrade display is stuck at logo for forever.
Kernel Version - 3.0.16-gc764fb
Babse Band 11.69A
Sensation Version 3.6
Appreciate your any kind help

I think thats firmware , not kernel...
And for flashing firmware u need to s off
Sent from my Sensation using xda app-developers app

no it is not firmware do this first.see here
http://forum.xda-developers.com/showthread.php?t=1556620
after flash the kernel

rzr86 said:
no it is not firmware do this first.see here
http://forum.xda-developers.com/showthread.php?t=1556620
after flash the kernel
Click to expand...
Click to collapse
Thanks for your reply.
I just followed the above link and flashed the "insercure-kernel.zip" followed by Bricked-3.0-aosp kernel. I am still getting the same error during flashing. Just to let you know I have S ON, is that stopping me?

rohit.prakash said:
Thanks for your reply.
I just followed the above link and flashed the "insercure-kernel.zip" followed by Bricked-3.0-aosp kernel. I am still getting the same error during flashing. Just to let you know I have S ON, is that stopping me?
Click to expand...
Click to collapse
what recovery do you have?
i recommend to flash 4ext recovery and then follow the rest procedure

rzr86 said:
what recovery do you have?
i recommend to flash 4ext recovery and then follow the rest procedure
Click to expand...
Click to collapse
I have ClockworkMod Recovery v5.8.0.9

rohit.prakash said:
I have ClockworkMod Recovery v5.8.0.9
Click to expand...
Click to collapse
I am still getting the same error after installing the recovery Ext4.
Here is the error log
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : Bricked-Kernel-3.0
ROM Version : 1.31 aosp
ROM Author : show-p1984\bricked.de
Device : HTC Sensation (pyramid)
Start at : Fri Jan 2 00:05:12 1970
-Checking Model ID
-Success!
-Model ID - HTC Pyramid
-Ok to proceed
Welcome to Bricked-3.0-aosp by show-p1984
Extracting files ...
Extract: /tmp/badass.sh
Extract: /tmp/cmdline.sh
Extract: /tmp/compatibility.sh
Extract: /tmp/dd
Extract: /tmp/mkbootimg
Extract: /tmp/mkbootimg.sh
Extract: /tmp/modclean.sh
Extract: /tmp/reboot.sh
Extract: /tmp/scheduler.sh
Extract: /tmp/sweep2wake.sh
Extract: /tmp/unpackbootimg
Extract: /tmp/zImage
Deleting Old Modules...
about to run program [/sbin/busybox] with 3 args
about to run program [/tmp/modclean.sh] with 1 args
Copying New Modules
Copying thermald.conf
Copying post_boot.sh...
Copying ZRAM enabler...
Setting permissions...
Extract: /system/etc/init.d/90zram
Extract: /system/etc/init.d/91tun
Extract: /system/etc/init.qcom.post_boot.sh
Extract: /system/lib/modules/bcmdhd.ko
Extract: /system/lib/modules/cifs.ko
Extract: /system/lib/modules/tun.ko
Running compatibility checks...
about to run program [/tmp/compatibility.sh] with 1 args
Setting badass configuration...
about to run program [/tmp/badass.sh] with 1 args
Pull the boot.img from your phone...
about to run program [/tmp/dd] with 3 args
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.574096 seconds, 27.9MB/s
Extract boot.img...
about to run program [/tmp/unpackbootimg] with 3 args
BOARD_KERNEL_CMDLINE 蠨﹎諒���╪槬玟C蚓菼愔只
BOARD_KERNEL_BASE 177074b3
PAGE_SIZE -315069624
Error: wrong pagesize: -315069624
run_program: child exited with status 1
Searching for this zip on the sdcard...
(this may take a few seconds)
about to run program [/tmp/cmdline.sh] with 1 args
Activating sweep2wake...
Deactivating HTC screenshot (PWR+HOME)...
(Use AOSP instead: Hold Vol.down+PWR for about a second)
about to run program [/tmp/sweep2wake.sh] with 1 args
Setting chosen scheduler...
about to run program [/tmp/scheduler.sh] with 1 args
Repack boot.img with Bricked &
changing the cmdline of the kernel...
Installing kernel...
about to run program [/tmp/mkbootimg.sh] with 1 args
cat: can't open '/tmp/boot.img-base': No such file or directory
usage: mkbootimg
--kernel <filename>
--ramdisk <filename>
[ --second <2ndbootloader-filename> ]
[ --cmdline <kernel-commandline> ]
[ --board <boardname> ]
[ --base <address> ]
-o|--output <filename>
run_program: child exited with status 1
Flashing New boot.img...
script aborted: assert failed: write_raw_image("/tmp/newboot.img", "boot")
assert failed: write_raw_image("/tmp/newboot.img", "boot")
Installer Error (Status 7)
End at : Fri Jan 2 00:05:15 1970

i don't know why it's telling you that but when i flashed the insecure.img and after sebastianFM 's kernel all went well
it is suppose to work(status 7)
i can't think something else
if you want wait for someone else to tell you what to do

Have you checked to make sure your download is not corrupt? MD5 sums?
Could be a corrupt download. Do another download then check the MD5 sums before trying to install.
Sent from my HTC Sensation using xda premium

Your kernel cmdline is messed up = you need to flash a boot.img manually or it wont work

Thanks everyone for your kind suggestion. I am finally able to flash CM10 ROM on my phone . It worked fine after installing 4EXT recovery and also enabled the smart flash option in 4EXT before flashing as same as some other member on this thread suggested the work around for the same.

Yes if you are S ON you will need to enable SMARTFLASH EVERY time you flash a rom, unless you have it enabled permanently.
Sent from my DKOSP using xda premium

[help] Maj Team venom

Hi
i wanted to try the new update but the aroma don't want to flash th rom....
For information i downgraded my hboot to 1.06
Can anyone help me ?
there is my log files :
Code:
AROMA INSTALLER version 2.56
© 2012 by amarullz xda-developers
ROM Name : ViperOneS
ROM Version : 1.2.1
ROM Author : Team Venom
Device : HTC One S
Start at : Fri Dec 7 17:01:51 2012
===========================================
| ViperOneS By Team Venom |
| Be patient - 1st boot may take a while |
===========================================
-Checking Model ID
-Success!
-Model ID - HTC One S
-Ok to proceed
>>> Writing Data
mount: failed to mount /dev/block/mmcblk0p35 at /data: Device or resource busy
Extract: /data/app/com.adobe.air-1.apk
Extract: /data/app/com.adobe.flashplayer-1.apk
Extract: /data/app/com.adobe.reader-1.apk
Extract: /data/app/com.dropbox.android-1.apk
Extract: /data/app/com.estrongs.android.pop-1.apk
Extract: /data/app/com.facebook.katana-1.apk
Extract: /data/app/com.google.android.apps.books-1.apk
Extract: /data/app/com.google.android.apps.maps-1.apk
Extract: /data/app/com.google.android.apps.plus-1.apk
Extract: /data/app/com.google.android.gm-1.apk
Extract: /data/app/com.google.android.marvin.talkback-1.apk
Extract: /data/app/com.google.android.street-1.apk
Extract: /data/app/com.google.android.videos-1.apk
Extract: /data/app/com.google.android.youtube-1.apk
Extract: /data/app/com.keramidas.TitaniumBackup-1.apk
Extract: /data/app/com.melodis.midomiMusicIdentifier.freemium-1.apk
Extract: /data/app/com.twitter.android-1.apk
Extract: /data/app/org.adaway-1.apk
Extract: /data/app/tunein.player-1.apk
Extract: /data/app/uk.co.sevendigital.android-1.apk
Creating filesystem with parameters:
Size: 1744829440
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 6656
Label:
Blocks: 425983
Block groups: 13
Reserved block group size: 103
Created filesystem with 11/106496 inodes and 13971/425983 blocks
error: file_write: write: I/O error
Installer Error (Status 1)
End at : Fri Dec 7 17:01:56 2012

Anybody know how to fix that?and sorry for my english but i'm french

I just ran into the same issue.
I solved it by flashing clockworkmodrecovery (dunno why, never had any issue with previous version of venom roms...)

MrLuje said:
I just ran into the same issue.
I solved it by flashing clockworkmodrecovery (dunno why, never had any issue with previous version of venom roms...)
Click to expand...
Click to collapse
CWM isn't supported officially for our device. I recommend using TWRP, or you might run into problems later on.
Sent from my HTC One S using Tapatalk 2

There are several possibilities:
- Did you use the latest version of TWRP? Reflash/flash it.
- Did you perform a full wipe before installing v1.2.1? Just do so.
- Redownload v.1.2.1 and install it again due to possible download errors.
I downgraded as well to 1.06 some weeks ago. Installation of v1.2.1 was successful on the first try. Never experienced problems since the downgrade.
Do these problems occur with other roms as well?

i've the latest TWRP recovery
and i performed a factory reset before flashing
i checked the md5 sum too
i 'll test later with the CWM recovery
now i'm on CM10

HTC Amaze 4G (Mobilicity)

Hello, All:
I am having MAJOR problem with almost custom ROM's for my HTC Amaze 4G (Mobilicity) Phone.
I am trying to install Nightmare Sense 1.6, and the installer quits prematurely (usually at 7%), flags the installation as "SUCCESSFUL" but it did not install anything.
I tried installing Cyogenmond 10.1. Although it installs successfully, but it is not usable at all because immediately after loading OS, there is the infinite repeated message: "Unfortunately, com.android.telephone has stopped working." It keeps coming up with "OK" button, making the phone useless.
Even for Cyagenmond 10, the drivers are not built properly. (No WiFi and No Bluetooth). I have to overwrite "lib" and "etc" folders from an old CM 10 experimental build (December-12-2012 build) to get the WiFi and Bluetooth working on the updated CM 10 releases.
The phone is S-ON, but unlocked bootloader via HTC Developer portal.
I just need a working Sense-based ROM (Camera buttons & voice mail notification icon that is long gone), which has the proper drivers for WiFi and Bluetooth. (overwriting etc & lib folders did not work on CM 10.1 update as it did not boot at all).
Any help is much appreciated. Sorry if the posting is a bit long!
Thank you.
sportsstar89 said:
You guys know the deal
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
NightmareSensev1.6.zip.log.txt
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : NightmareRom 4.0
ROM Version : 1.6
ROM Author : Team Nightmare
Device : HTC Amaze 4G
Start at : Sun Apr 28 10:29:22 2013
===========================================
| NightmareRom By Team Nightmare |
| Be patient - 1st boot may take a while |
===========================================
-Checking Model ID
-Success!
-Model ID - HTC Amaze 4G
-Ok to proceed
>>> Writing Data
Extract: /data/app/com.adobe.reader-1.apk
Extract: /data/app/com.dropbox.android-1.apk
Extract: /data/app/com.facebook.katana-1.apk
Extract: /data/app/com.google.android.apps.books-1.apk
Extract: /data/app/com.google.android.apps.docs-1.apk
Extract: /data/app/com.google.android.apps.maps-1.apk
Extract: /data/app/com.google.android.apps.plus-1.apk
Extract: /data/app/com.google.android.music-1.apk
Extract: /data/app/com.google.android.street-1.apk
Extract: /data/app/com.google.android.youtube-1.apk
Extract: /data/app/com.googlecode.android.wifi.tether-1.apk
Extract: /data/app/com.melodis.midomiMusicIdentifier.freemium-1.apk
Extract: /data/app/com.twitter.android-1.apk
Creating filesystem with parameters:
Size: 1610611712
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 6144
Label:
Blocks: 393215
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/98304 inodes and 12897/393215 blocks
error: file_write: write: I/O error
Installer Error (Status 1)
End at : Sun Apr 28 10:29:31 2013

Successfully flashed a ROM but stuck on HTC Logo

i know there are a lot of threads out there having the same problem as mine, but i think my situation is different, so need help on this.
Here it goes:
After i flashed my unlocked S-On HTC Sensation 4G T-Mobile back to Stock, i experienced wifi problem so i decided to flash again a rom compatible with my handset. After flashing Android_Revolution_HD-Sensation_1.2.2_T-Mobile, it's stuck on HTC Logo, so i decided to flash the Rom again. Now it can't seem to find my system and data partition, it says E: Format_volume: make_extf4fs failed. I solved the problem by partitioning my external sd card as system and data and installing another rom with the updater-script configured. Now the installer says it is sucessful but after i reboot, it's still stuck in the HTC logo. What should i do? I'm really desperate for help. Hope you can rescue me in this situation.
HEre is the installation Log (i have to delete the extract logs since it's too long):
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : Revelation
ROM Version : 1.0.3
ROM Author : SebastianFM
Device : HTC Sensation/XE/4G
Start at : Fri Jan 2 00:11:37 1970
Preparing partitions
Formatting cache partition
unmount of /cache failed; no such volume
[Creating filesystem with parameters]:---
Size: 125784064
Block size: 4096
Blocks per group: 32768
Inodes per group: 7680
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 30709
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/7680 inodes and 1518/30709 blocks
warning: wipe_block_device: Discard failed
error: file_write: write: I/O error
E:make_ext4fs failed (1) on /dev/block/mmcblk0p24format: Can not format_ext4 emmc partition named "/dev/block/mmcblk0p24"ui_print
Installing system
Mounting system on sd-ext
about to run program [/sbin/busybox] with 6 args
Mounting Data on sd-ext2
about to run program [/sbin/busybox] with 6 args
Copying files
Setting permissions
Installing kernel
Copying kernel modules
Mounting /system on sd-ext
about to run program [/sbin/busybox] with 6 args
Extract: /system/lib/modules/bcmdhd.ko
Extract: /system/lib/modules/cdc-acm.ko
Extract: /system/lib/modules/option.ko
Extract: /system/lib/modules/pl2303.ko
Extract: /system/lib/modules/usb_wwan.ko
Writing boot image
Flashing Boot.img...
Kernel imaged flashed...
Finished
script result was [@Finished]
Installer Sucessfull (Status 0)
End at : Fri Jan 2 00:16:12 1970

did u flash boot.img after u flashed the rom?

jmcclue said:
did u flash boot.img after u flashed the rom?
Click to expand...
Click to collapse
no, how do i do that? if from fastboot, i don't think that's posible, adb can't detect my device.

iameg said:
no, how do i do that? if from fastboot, i don't think that's posible, adb can't detect my device.
Click to expand...
Click to collapse
adb & fastboot setup
http://www.google.ie/url?q=http://f...Z1GBjE&usg=AFQjCNG5wlDp1B-QvlsXu3HOD2a01TSDgw
plenty of guides here on xda for u to read if not sure of fastboot commands.
and u can always flash latest 4ext recovery and enable smart flash in settings, it flashes boot.img for s-on users.

HELP!
jmcclue said:
adb & fastboot setup
http://www.google.ie/url?q=http://f...Z1GBjE&usg=AFQjCNG5wlDp1B-QvlsXu3HOD2a01TSDgw
plenty of guides here on xda for u to read if not sure of fastboot commands.
and u can always flash latest 4ext recovery and enable smart flash in settings, it flashes boot.img for s-on users.
Click to expand...
Click to collapse
hi, after a few days of not having been able to attend to my htc sensation, now it doesn't charge (no led light indicator) and doesn't power on nor go to bootloader. how do i fix this? please help me.