Ok so i followed all instructions on a few different pages on using odin to flash in stock, but nothing i do seems to work, every time i try using odin it fails, ive tried using different usb cords, redownloading the files, downloading them from different sources, nothing seems to work, it was bricked when i tried to flash in cwm, i dont know if i was supposed to root first, but that aside, nothing seems to be working.
jimmy2989 said:
Ok so i followed all instructions on a few different pages on using odin to flash in stock, but nothing i do seems to work, every time i try using odin it fails, ive tried using different usb cords, redownloading the files, downloading them from different sources, nothing seems to work, it was bricked when i tried to flash in cwm, i dont know if i was supposed to root first, but that aside, nothing seems to be working.
Click to expand...
Click to collapse
can you still get into download mode?
jimmy2989 said:
Ok so i followed all instructions on a few different pages on using odin to flash in stock, but nothing i do seems to work, every time i try using odin it fails, ive tried using different usb cords, redownloading the files, downloading them from different sources, nothing seems to work, it was bricked when i tried to flash in cwm, i dont know if i was supposed to root first, but that aside, nothing seems to be working.
Click to expand...
Click to collapse
What are you using? Gingerbread or ICS? Remember there are two different ways to root this device. One for each version as mentioned earlier. What did you flash in CWM? Superuser? Need to be more specific..
woodzx67 said:
can you still get into download mode?
Click to expand...
Click to collapse
im_awesome_right? said:
What are you using? Gingerbread or ICS? Remember there are two different ways to root this device. One for each version as mentioned earlier. What did you flash in CWM? Superuser? Need to be more specific..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2269071
He forgot to unclick "repartition" in Odin.
OP, Have you tried removing and reinstalling the drivers? It might not help, but it can't hurt.
Romman0 said:
http://forum.xda-developers.com/showthread.php?t=2269071
He forgot to unclick "repartition" in Odin.
OP, Have you tried removing and reinstalling the drivers? It might not help, but it can't hurt.
Click to expand...
Click to collapse
i was on stock gingerbread, the first time when i was trying to root and i flashed in cwm i didnt forget to unclick the repartition, it was the last time. Yes i can get into download mode, but its the firmware upgrade fail download mode
Anyway, ive used different usb cords, tryed different downloads, different versions of odin, is it possible to just install a custom rom from soft brick as it is now?
follow this
http://forum.xda-developers.com/showthread.php?p=41446107#post41446107
jparnell8839 said:
follow this
http://forum.xda-developers.com/showthread.php?p=41446107#post41446107
Click to expand...
Click to collapse
It fails at nand write start when trying to install clockworkmod the same as flashing to stock
jimmy2989 said:
It fails at nand write start when trying to install clockworkmod the same as flashing to stock
Click to expand...
Click to collapse
are you on windows? in your device manager, do you see this when plugged in and in download mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if not, download and install the samsung drivers
jparnell8839 said:
are you on windows? in your device manager, do you see this when plugged in and in download mode?
if not, download and install the samsung drivers
Click to expand...
Click to collapse
i comes up as samsung usb composite device, but its there
jimmy2989 said:
i comes up as samsung usb composite device, but its there
Click to expand...
Click to collapse
download this, uninstall what you see there in device management (right click, uninstall device) and run the executable. go back into download mode, try again
jparnell8839 said:
download this, uninstall what you see there in device management (right click, uninstall device) and run the executable. go back into download mode, try again
Click to expand...
Click to collapse
Did that and it just shows the exact same thing, doing the exact same thing.
jimmy2989 said:
Did that and it just shows the exact same thing, doing the exact same thing.
Click to expand...
Click to collapse
Give me a little bit to research... sounds like NAND rw corruption... I'll see if I can find stock everything to see if we can fix it.
---------- Post added at 02:01 PM ---------- Previous post was at 01:57 PM ----------
jparnell8839 said:
Give me a little bit to research... sounds like NAND rw corruption... I'll see if I can find stock everything to see if we can fix it.
Click to expand...
Click to collapse
you dont happen to have Kies installed do you? If so, KILL IT WITH FIRE!
jparnell8839 said:
Give me a little bit to research... sounds like NAND rw corruption... I'll see if I can find stock everything to see if we can fix it.
---------- Post added at 02:01 PM ---------- Previous post was at 01:57 PM ----------
you dont happen to have Kies installed do you? If so, KILL IT WITH FIRE!
Click to expand...
Click to collapse
First, no kies isnt installed, kies is the devil, and i believe i figured out what the major problem is, according to the box that the phone was in, its a galaxy s blaze 4g, but i was doing some searching online and it looks like the phone is just a galaxy s 4g, sgh-t959v is on the phone, not sgh-t959, i might be wrong but it looks like ive been using the wrong software for the problem.
jimmy2989 said:
First, no kies isnt installed, kies is the devil, and i believe i figured out what the major problem is, according to the box that the phone was in, its a galaxy s blaze 4g, but i was doing some searching online and it looks like the phone is just a galaxy s 4g, sgh-t959v is on the phone, not sgh-t959, i might be wrong but it looks like ive been using the wrong software for the problem.
Click to expand...
Click to collapse
For this particular forum, only the SGH-T769 will work with our Odin methods/downloads. You still probably corrupted the NAND rw flashing ours, but at least you know what to do from here on out
Go here http://forum.xda-developers.com/showthread.php?t=1480418 and you should be good to go. remember to download the Odin there, I'm pretty sure each version is phone specific to a small degree. and let us know how it goes.
Related
Hello! I started this thread as it seems it's too hard for lot of people to search for guides about flashing. This is a way to get rid of useless posts like: "What is flashing?" "How to flash?" "Can I haz a cheezeburger?" Be grateful
DISCLAIMER: I am not responsible of any issues you might have by using my guide. Flashing always includes a risk of bricking your device. Dont come to cry. You've been warned!
The list of ROMs can be found HERE
-Download ODIN Multidownloader 4.43. Link: http://www.megaupload.com/?d=W6CMP1LA
-After it has downloaded, extract it anywhere u want (i suggest desktop, easier)
-RUN ODIN.
-Power off your phone.
-Put your phone into downloading mode. Hold together: Power+Volume Down+Home (phone boots to Downloading mode)
-Connect your phone to PC via USB cable.
-Wait for the drivers to install. After that, in ODIN, one of the top line "bars" should turn yellow and some text should appear there.
-Download the AriesVE.ops file and check it as OPS. Link to download (attached, scroll down the first post, credits goes to manveru0): http://forum.xda-developers.com/showthread.php?t=1331164
-Then check the 'one package' from the top left
-The ROM you've downloaded, check it as one package. If it's MD5 file. Then click flash.
-Flashing will take about 9 minutes.
-When you see "Close serial port and wait until rebooting" in odin, you can unplug your phone.
-Enjoy!
-If the flashing doesn't complete. Or you face some other problems, just try another USB port, or computer if possible
NOTE: If the ROM includes several files you should check them all. For example XXKP4 2.3.4 Rooted, screen shot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for guide...finally someone made it.
May i add... if flashing gets stuck somewhere... try another usb-cable and/or usb-port. If possible another computer.
mal13 said:
Thanks for guide...finally someone made it.
May i add... if flashing gets stuck somewhere... try another usb-cable and/or usb-port. If possible another computer.
Click to expand...
Click to collapse
Yes, thanks for reminding.
Thanks.Very useful.
Odin Link doesnt work bro....
Whats their Official Site anyways ? cant find via google
---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------
Okay got it, I downloaded the I9001ZSKP6 ROM but theres no .OPS file, what to do now ?
Thanks for this mate :0)
Gramrock said:
Odin Link doesnt work bro....
Whats their Official Site anyways ? cant find via google
---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------
Okay got it, I downloaded the I9001ZSKP6 ROM but theres no .OPS file, what to do now ?
Click to expand...
Click to collapse
I've included the .ops file in the first post. Just open the link and scroll down the first post.
awesome thanks, got the .OPS
Okay man, ur Guide is Great, I'm a beginner and the describtion is very nice, very precise step by step orders.
u got a thanks, and hope u will keep up the helpful work !
Would be good to make this thread sticky!
nikagl said:
Would be good to make this thread sticky!
Click to expand...
Click to collapse
That's why all thanks are appreciated
Thanks!
well im well chuffed, i just flashed to 2.3.6.
is this the same procedure for all roms ?
this version is so much better than my stock 2.3.3, its so much more responsive.
BackDaws said:
well im well chuffed, i just flashed to 2.3.6.
is this the same procedure for all roms ?
this version is so much better than my stock 2.3.3, its so much more responsive.
Click to expand...
Click to collapse
For all stock ROMs yes. CWM for custom ROMs when they start to appear
One noob question. Can I flash this stock ROM from recovery mode, meaning without ODIN. Just to reboot to recovery and than update from zip ?
kabadahija said:
One noob question. Can I flash this stock ROM from recovery mode, meaning without ODIN. Just to reboot to recovery and than update from zip ?
Click to expand...
Click to collapse
What ROM ur talking about ?
Gramrock said:
What ROM ur talking about ?
Click to expand...
Click to collapse
maybe a typical typo these=this . answer to the question. No you cant
Gramrock said:
What ROM ur talking about ?
Click to expand...
Click to collapse
Any of these (yes it is typo), but actually I was thinking about KG3 v2.3.3 ROM ?
Edit: I just see you wrote that i can't flash from recovery.
Do you know why? What is needed to flash from recovery ?
kabadahija said:
Any of these (yes it is typo), but actually I was thinking about KG3 v2.3.3 ROM ?
Edit: I just see you wrote that i can't flash from recovery.
Do you know why? What is needed to flash from recovery ?
Click to expand...
Click to collapse
through cwm Flashable boot.img and correct signing. AFAIK. im not a dev so dont blame me giving incorrect info. Thats for sure you cant flash .smd and .md5 files by cwm
Maybe an idea to remove the actual ROMs mentioned in the first post and refer to the ROM list:
http://forum.xda-developers.com/showthread.php?t=1346245
(btw. some ROM downloads also contain ODIN and AriesVE)
Regards,
Nika.
Hello.
My English is quite bad, and I'm sorry for that. Anyway, I hope that someone of you can help me with my problem, and will understand what I wanted to say.
So, at first I unlocked bootloader. After that, with InsecureBootandRoot script I wanted to root phone. When I did it, in "cmd" it stuck on "Daemon started successfully".
From then, I can't run my phone. Bootloader is working, fastboot USB aswell. I tried to install few recoverys, but none of them were working. ADB is also not working, it can't see my device(Probably because it's not working in fastboot. And if my phone is not in fastboot, computer don't recognise my device). Also, I can't "throw" any files to phone because computer see my device only in fastboot.
I tried to use HTC ONE S AIO kit . It show me my CID(HTC 0_32) and version(3.16.401.8), but that's all. Other commands are not working at all.
I also installed sdk and all drivers. That didn't help, meh.
Any ideas what should I do to have my phone working again? :c
Pisay said:
Hello.
My English is quite bad, and I'm sorry for that. Anyway, I hope that someone of you can help me with my problem, and will understand what I wanted to say.
So, at first I unlocked bootloader. After that, with InsecureBootandRoot script I wanted to root phone. When I did it, in "cmd" it stuck on "Daemon started successfully".
From then, I can't run my phone. Bootloader is working, fastboot USB aswell. I tried to install few recoverys, but none of them were working. ADB is also not working, it can't see my device(Probably because it's not working in fastboot. And if my phone is not in fastboot, computer don't recognise my device). Also, I can't "throw" any files to phone because computer see my device only in fastboot.
I tried to use HTC ONE S AIO kit . It show me my CID(HTC 0_32) and version(3.16.401.8), but that's all. Other commands are not working at all.
I also installed sdk and all drivers. That didn't help, meh.
Any ideas what should I do to have my phone working again? :c
Click to expand...
Click to collapse
There is no matching RUU, but i will upload you the matching boot+recovery. Will take some minutes. Download both files and flash them via fastboot.
DOWNLOAD
I should add that my phone is S3.
Anyway thanks for the answer, didn't knew someone is going to help me so fast :3.
pisay said:
i should add that my phone is s3.
Anyway thanks for the answer, didn't knew someone is going to help me so fast :3.
Click to expand...
Click to collapse
then dont flash the files. I'll have a look for the matching files.
Are you sure you have a ville c2 (S3) ??? Because 3.16.401.8 is the official EU S4 Jellybean release...
---------- Post added at 09:26 PM ---------- Previous post was at 09:17 PM ----------
LS.xD said:
then dont flash the files. I'll have a look for the matching files.
Are you sure you have a ville c2 (S3) ??? Because 3.16.401.8 is the official EU S4 Jellybean release...
Click to expand...
Click to collapse
You can see your model ID here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whats your MID??
oh well, I'm quite shocked.
When I bought this phone, they told me that it's 560e.
But I looked now, and it's Z520e.
Sorry for that, didn't knew that I have S4. Can you upload files for S4 again?
Pisay said:
oh well, I'm quite shocked.
When I bought this phone, they told me that it's 560e.
But I looked now, and it's Z520e.
Sorry for that, didn't knew that I have S4. Can you upload files for S4 again?
Click to expand...
Click to collapse
You're lucky LINK S4 files
If you say so ._.
I flashed them, what should I do now?
Pisay said:
If you say so ._.
I flashed them, what should I do now?
Click to expand...
Click to collapse
Phone should be fine again
Well, I still can't turn it on.
My computer still can't see him.
I can't describe it as "working phone" ;_;
Recovery also still not working.
Pisay said:
Well, I still can't turn it on.
My computer still can't see him.
I can't describe it as "working phone" ;_;
Recovery also still not working.
Click to expand...
Click to collapse
May you post a link to the software you have flashed to your phone?
Have you already tried PhilZ recovery? --> LINK
Dunno if I can paste links here.
Anyway I was trying to root my phone with this tutorial: http://theunlockr.com/2012/04/22/how-to-root-htc-one-x/ .
*Yeah, I'm stupid and I thought my phone is HTC ONE X, not HTC ONE S*
@edit
This recovery is also not working.
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 <- I have this RUU on PC. Will it work on my phone?
You have the wrong CID for the RUU.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
---------- Post added at 09:55 PM ---------- Previous post was at 09:55 PM ----------
Did you perform "factory reset" in bootloader Mode already?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Yeah, I already tried that. It stuck on logo then, like with recovery.
Pisay said:
Yeah, I already tried that. It stuck on logo then, like with recovery.
Click to expand...
Click to collapse
I have checked the link. The script "only" flashes a kernel (boot.img) + Superuser app. Flashing a new kernel should work for you. What command did you use to flash the boot.img ??
fastboot flash boot boot.img and then fastboot flash boot recovery.img
I'll try uninstalling sdk and all drivers, and then install them using tutorial from this forum. Maybe it will be easier, when adb will work .-.
Pisay said:
fastboot flash boot boot.img and then fastboot flash boot recovery.img
I'll try uninstalling sdk and all drivers, and then install them using tutorial from this forum. Maybe it will be easier, when adb will work .-.
Click to expand...
Click to collapse
Did you restart the bootloader after flashing? Have you cleared caches via fastboot also??
BTE adb will not help you without at least a working recovery...
Which command I should use to restart it?
And yeah, I cleared caches.
And thanks for trying to help me, I really appreciate it. U're wasting your time because some teenager destroyed his phone ._. . Oh god, I'm stupid.
@edit
When I tried to run bootloader, it showed me this:
Thats PhilZ CWM Perfect, you have a working recovery I'm off for 30 minutes. I can assisst you via Teamviewer when i'm back, if you want.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Not at all, these commands under it mean that anything in recovery won't work.
Also, from now I can't even start bootloader ._. .
Oh well, I'll just give this phone to the service. If they can't turn it on, and also turn on bootloader, can they say to me something like "Hey, you tried to change system of this phone so we won't give you another one"?. :c
Pisay said:
Not at all, these commands under it mean that anything in recovery won't work.
Also, from now I can't even start bootloader ._. .
Oh well, I'll just give this phone to the service. If they can't turn it on, and also turn on bootloader, can they say to me something like "Hey, you tried to change system of this phone so we won't give you another one"?. :c
Click to expand...
Click to collapse
Philz has a option to boot into bootloader. Have you tried it? If you give it to service they'll recognize that you have modified thze phone. As you were able to flash philz, you should also be able to flash boot+recovery image. Then you'll have to perform "factory reset + clear storage" to fix the sd card issue. I'm sure its possible! Once done you can install a rom manually or change the CID to run a stock RUU EU unbranded.
As your warranty is void I'd suggest to fix it o ya own
Here is much faster alternative to the current Odin Tar that is hanging around. Not to diss anyone but putting an important file on a server that makes you pay for high speed access is LAME. This took over 3 hours to download from that server...
This takes you back to: G920VVRU1AOC3, Wipes everything! Like a new phone
Here it is on AFH.com
Fast for every one!
ALL_VZW_G920VVRU1AOC3_G920VVZW1AOC3_CL4318389_QB4424773_REV02_user_low_ship.zip
Latest Odin for this file....
How to use!
Load Samsung Mobile Drivers
Connect Phone while in download mode (Hold Power, Home and Volume down to get there)
Unzip Odin to desktop
Unzip Odin Tar from post #1 to desktop
Open Odin
Select AP and load Odin Tar
Wait a few seconds (depending on PC Speed)
Hit Start then wait until its done.
Do NOT touch the phone while this is in process!
When completed phone will reboot to recovery, do some "stuff" then boot up fresh like out of the box new!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
I've seen you on a lot of my Samsung devices and HTC devices. Glad to have you here. So glad I decided to buy/keep this phone
Sent from my SM-G920V using Tapatalk 2
hopesrequiem said:
I've seen you on a lot of my Samsung devices and HTC devices. Glad to have you here. So glad I decided to buy/keep this phone
Sent from my SM-G920V using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I have been around a while, lol. Im old!
Don't make it too easy, lol.
I get a warm, fuzzy feeling when I see scrosler post in a dev section for a phone I want. Now I have to get this phone.
xdadevnube said:
Don't make it too easy, lol.
I get a warm, fuzzy feeling when I see scrosler post in a dev section for a phone I want. Now I have to get this phone.
Click to expand...
Click to collapse
Get it. That it is all.
scrosler said:
Yeah, I have been around a while, lol. Im old!
Click to expand...
Click to collapse
You've been around more times than the ice cream truck in the second week of July. And that's a HOT week! Lol. Thanks for all your hard work sir! Looking forward to seeing what happens and it's good to know that a lot of us here "know you" and your credibility/reputation for producing great work. Keep it up buddy! =)
Having trouble ladies and gents. Hoping for help.
I am soft-bricked ATM.
I was running fine, rooted, and have paid for Flashfire.
I downloaded our friend scrosler's flashable rom with root and I somehow soft-bricked my phone on the first try.
So....I downloaded Odin and the stock rom from this thread, even got the latest drivers just to be sure.
no matter what I do, Odin reports: "complete ( Write) operation failed." and "all threads completed, (succeed 0, failed 1)"
Have tried it multiple times, even switched to S6 factory USB cord and moved around to different prts on my system, all are motherboard driven USB ports.
Any ideas?
Cant get MD5's to match. Have downloaded multiple times, have tried multiple programs to unzip....no luck.
Never mind...was checking MD5 against unzipped file. Zipped MD5 is correct.
Going to try Odin again.
Nope.....Odin still fails.
Would love some ideas of what to try next.
Rafael4096 said:
Cant get MD5's to match. Have downloaded multiple times, have tried multiple programs to unzip....no luck.
Never mind...was checking MD5 against unzipped file. Zipped MD5 is correct.
Going to try Odin again.
Nope.....Odin still fails.
Would love some ideas of what to try next.
Click to expand...
Click to collapse
Screenshot the fail and post it
I thought stock unmodified Roms/source files belonged in the general section? not really development lol
Sent from my SM-G925V using XDA Free mobile app
---------- Post added at 12:22 AM ---------- Previous post was at 12:21 AM ----------
Rafael4096 said:
Cant get MD5's to match. Have downloaded multiple times, have tried multiple programs to unzip....no luck.
Never mind...was checking MD5 against unzipped file. Zipped MD5 is correct.
Going to try Odin again.
Nope.....Odin still fails.
Would love some ideas of what to try next.
Click to expand...
Click to collapse
try selecting only auto reboot in options and report back here
Sent from my SM-G925V using XDA Free mobile app
Using Odin with only Auto-reboot checked yields the same result.
Here is pic.
Rafael4096 said:
Here is pic.
Click to expand...
Click to collapse
Ok, you are failing on the very first step. Make sure you dont have KIES running on your PC, make sure you are in download mode and make sure you are using factory cable.
Let us know.
elliwigy said:
I thought stock unmodified Roms/source files belonged in the general section? not really development lol
Click to expand...
Click to collapse
Your not that guy who put the files on a server that serves 100K per second unless you pay are you? lol
PS: Why didint you ask the same question in this thread: [Root/Guide] How-to Root (Simplified)
Never had Kies on this machine. In download mode (press and hold down-vol and button at bottom of face of phone, and power).
Screen is light blue and says "Downloading..." with a big down arrow. Of course, Odin doesn't see the phone until I hit vol-up button.....and I am doing that. Factory cable. Have tried it in multiple motherboard ports....not an add-on card. I have used Odin on my S4 from this machine without problems.
Any other ideas? Thanks for trying to help me.
Rafael4096 said:
Never had Kies on this machine. In download mode (press and hold down-vol and button at bottom of face of phone, and power).
Screen is light blue and says "Downloading..." with a big down arrow. Of course, Odin doesn't see the phone until I hit vol-up button.....and I am doing that. Factory cable. Have tried it in multiple motherboard ports....not an add-on card. I have used Odin on my S4 from this machine without problems.
Any other ideas? Thanks for trying to help me.
Click to expand...
Click to collapse
Can I ask what version of Odin you are using?
3.10.6
Downloaded it from your link in this thread.
jparasita said:
Can I ask what version of Odin you are using?
Click to expand...
Click to collapse
Hopefully the one in the OP but that is a good question as well.
Hello everybody!
My S7 is hard bricked after me restore it by Odin
I have tried in many ways but not sucess!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm happy when you care my threads.
Did you verified your Usb drivers, or tried a different port oj your computer? Try unistalling drivers completely and try again
atrix_noob said:
Did you verified your Usb drivers, or tried a different port oj your computer? Try unistalling drivers completely and try again
Click to expand...
Click to collapse
I tried, but it not work!
Hiep2409 said:
Hello everybody!
My S7 is hard bricked after me restore it by Odin
I have tried in many ways but not sucess!
I'm happy when you care my threads.
Click to expand...
Click to collapse
What files did you use to restore from odin? What version was you phone on and what versi9n was the firmware you flashed? Also where did you download it from? (Check for the obvious, like deleting drivers and installing the correct ones or just reinstalling them. Or just use a different computer) Let us know as much as you do, so we can help you out
Looks to me like you have A LOT of driver compatibility issues on your computer. I see some that have to do with HTC.. Do you have an HTC phone as well?
Try these steps:
1. In device Manager, double click on one of the devices with the exclamation mark
2. Click on the "Details" tab
3. Under the "Property" drop down, look for "Hardware Ids" and click on it
Highlight the first thing you see under "Value" right click on it and copy it.
Mine says: USB\VID_04E8&PID_6860&REV_0400
And it's for the SAMSUNG Mobile USB Composite Device
4. Try googling that value. You should find compatible drivers for it.
I'm attaching the USB drivers I'm using.
Hope this helps.
my question is why are you flashing your S7 with tools other than Odin? those tools are not meant to flash the S7
micallan_17 said:
my question is why are you flashing your S7 with tools other than Odin? those tools are not meant to flash the S7
Click to expand...
Click to collapse
As i can see you did not read the first post!
"My S7 is hard bricked after me restore it by Odin"
Basically this means: flash memory is not good for booting divice, so it stays in Qualcomm's Snapdragon USB serial bootloader/flash mode.
These are qualcomm tools.
Grow up!
PadsPCB said:
As i can see you did not read the first post!
"My S7 is hard bricked after me restore it by Odin"
Basically this means: flash memory is not good for booting divice, so it stays in Qualcomm's Snapdragon USB serial bootloader/flash mode.
These are qualcomm tools.
Grow up!
Click to expand...
Click to collapse
Without an unlocked bootloader, it's nearly impossible to brick our S7 unless you try super hard to do so. Instead of getting snappy with people here, giving us information would help.
Can you put the phone into download mode? (power off, hold vol down, home, power until a blue screen appears, then press vol up)
What exactly did you flash with Odin?
Was the flash interrupted? can you provide a log?
Whatever you did to your phone, YOU did it. So dont come here, ask for help, and then tell the people trying to help to "Grow up".
I am having the same issue, except I didn't do anything wrong with Odin, I was a just reflashing, and it broke. How can I fix this?
If you can link the xml files, i can try from my end
anyone fix this have the same issue with a s8 +
[email protected] said:
anyone fix this have the same issue with a s8 +
Click to expand...
Click to collapse
My recommendation is to go on the s8/s8+ forums, hopefully someone had the same issue and resolved it there...
unbrick hardbricked
hi,guys i'm new at this but i found this files on the web that works for me like a charm no configuration needed only double click on file recover.bat and buala.
https:// mega.nz/ #!UyQ11ZIA
Can i have the password for the file
PLZ
carlitossatan said:
hi,guys i'm new at this but i found this files on the web that works for me like a charm no configuration needed only double click on file recover.bat and buala.
https:// mega.nz/ #!UyQ11ZIA
Click to expand...
Click to collapse
decryption key PLEASE
I want this file, too
---------- Post added at 03:56 AM ---------- Previous post was at 03:50 AM ----------
My S7 edge has also become brick. Can you send repair methods and tool files to my Google mail? Thank you!([email protected])
Guys, OP posted 6 months ago and has not posted again since, unlikely they will post the file now
Im on it...
*Detection* said:
Guys, OP posted 6 months ago and has not posted again since, unlikely they will post the file now
Click to expand...
Click to collapse
Here File without password work only with old binary Like 4 But New Binary Not work I have G930V Bricked After Flash Downgrade Companion file From 8.0 I hope any one can share or make file with new binary
G930XU5
https://mega.nz/#!6NEz2I7Q!df-ITxjS0w7YZJmn1_dSoqil7KWgzYmuvLNss-qTePg
G935XU5
https://mega.nz/#!GIkh0DQD!mKb2vR6p6ivYKofhFXl9iT7DAkIg04qn-Nk32VuTHqk
g955u bit5
gonnaneedaburnheal said:
If you can link the xml files, i can try from my end
Click to expand...
Click to collapse
if you need g955u bit5 unbrick solution
whatsapp+2348067369016
I've got a Galaxy S5 that I purchased from someone earlier today and it worked well until I did some type of software update, it went well but then restarted and it's been messed up since. Now, whenever I boot up the phone it boots fine all the way too the Sprint Spark screen and it just hangs, and hangs and then restarts again, and goes through the same process. I've tried reflashing the device using Odin but I keep getting an error "SW REV CHECK FAIL" with some other stuff. I've tired to do so much, I tried resetting the device and the cache using the options. Please, can someone offer me some help. It's a 900P and it's a Sprint device. I just got back from a funeral a little bit ago so I'd love to get this thing working finally, I've been working on it all night.
Can you check the model number under the battery?
I think Sm-g900m is the South America version, and Sm-g900p should be the North America sprint version.
tys0n said:
Can you check the model number under the battery?
I think Sm-g900m is the South America version, and Sm-g900p should be the North America sprint version.
Click to expand...
Click to collapse
Yes, that's correct my bad. It's the 900P. I'll correct the thread.
nulledbyme said:
Yes, that's correct my bad. It's the 900P. I'll correct the thread.
Click to expand...
Click to collapse
Ok, good The "SW REV CHECK FAIL" is probably caused by secure bootloader which won't allow downgrade.
Have you tried to flash the latest firmware?
tys0n said:
Ok, good The "SW REV CHECK FAIL" is probably caused by secure bootloader which won't allow downgrade.
Have you tried to flash the latest firmware?
Click to expand...
Click to collapse
Could you link me a GOOD site that doesn't require me to pay to get fast downloads? Haha I'll try it in the morning if you send me a link.
nulledbyme said:
Could you link me a GOOD site that doesn't require me to pay to get fast downloads? Haha I'll try it in the morning if you send me a link.
Click to expand...
Click to collapse
Sure! This should be the latest firmware available. http://updato.com/firmware-archive-select-model?record=281516900A1911E7963AFA163EE8F90B
Hope it will work to get you up and running.
tys0n said:
Ok, good The "SW REV CHECK FAIL" is probably caused by secure bootloader which won't allow downgrade.
Have you tried to flash the latest firmware?
Click to expand...
Click to collapse
tys0n said:
Sure! This should be the latest firmware available. http://updato.com/firmware-archive-select-model?record=281516900A1911E7963AFA163EE8F90B
Hope it will work to get you up and running.
Click to expand...
Click to collapse
It goes fine all the way till the system.img.ext4 part and it just sits there. I tried letting it sit last night for 4+ hours on a different firmware and it just sat there. Any thoughts?
EDIT: So, I reflashed it, it was successful but my device still hangs at the Sprint screen..
nulledbyme said:
It goes fine all the way till the system.img.ext4 part and it just sits there. I tried letting it sit last night for 4+ hours on a different firmware and it just sat there. Any thoughts?
EDIT: So, I reflashed it, it was successful but my device still hangs at the Sprint screen..
Click to expand...
Click to collapse
Hmm, I have no idea why it won't boot properly. This "stuck on bootlogo" seems to be a common problem on todays samsung models.
Have you tried factory reset in recovery after flash?
Only other thing I can think of is if some other partition got messed up during the software update.
Maybe can be fixed with a 4-file "repair firmware" with BL/AP/CP/CSC-parts. I'll see if I can find one.
tys0n said:
Hmm, I have no idea why it won't boot properly. This "stuck on bootlogo" seems to be a common problem on todays samsung models.
Have you tried factory reset in recovery after flash?
Only other thing I can think of is if some other partition got messed up during the software update.
Maybe can be fixed with a 4-file "repair firmware" with BL/AP/CP/CSC-parts. I'll see if I can find one.
Click to expand...
Click to collapse
I've heard of that before but I've never really looked into it much. Do you by any chance have a Skype or a Discord link I could join so I could talk to you more direct?
nulledbyme said:
I've heard of that before but I've never really looked into it much. Do you by any chance have a Skype or a Discord link I could join so I could talk to you more direct?
Click to expand...
Click to collapse
Sorry, I don't. Maybe it's better if you ask for more help in S5 forum on how to go on with this, as I don't own this device myself. I will probably find that thread if you do, and be able to help futher if needed
Otherwise there's plenty of tutorials on how to flash 4-files with odin.
I did find one and uploaded it to mega in case you want to grab it. G900PVPS3CQB3_CSC_SPT_CL10090296_QB12576102_REV00_user_low_ship_MULTI_CERT.tar.zip
I've used those kind of firmwares on various devices for all kind of problems where official firmware wasn't enough to fix it, and it always worked without problems.
tys0n said:
Sorry, I don't. Maybe it's better if you ask for more help in S5 forum on how to go on with this, as I don't own this device myself. I will probably find that thread if you do, and be able to help futher if needed
Otherwise there's plenty of tutorials on how to flash 4-files with odin.
I did find one and uploaded it to mega in case you want to grab it. G900PVPS3CQB3_CSC_SPT_CL10090296_QB12576102_REV00_user_low_ship_MULTI_CERT.tar.zip
I've used those kind of firmwares on various devices for all kind of problems where official firmware wasn't enough to fix it, and it always worked without problems.
Click to expand...
Click to collapse
I'll try that so, with those files I just put them all into Odin?
nulledbyme said:
I'll try that so, with those files I just put them all into Odin?
Click to expand...
Click to collapse
Yes exactly. This is what you'll find once it's unzipped.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First make sure your battery is well charged (we don't want it to die during flash)
Just put the files in their boxes in odin, connect your phone in download mode and flash.
Hopefully it will now boot past that bootlogo. If not...there must be some hardware problem.
tys0n said:
Yes exactly. This is what you'll find once it's unzipped.
View attachment 4098803
First make sure your battery is well charged (we don't want it to die during flash)
Just put the files in their boxes in odin, connect your phone in download mode and flash.
Hopefully it will now boot past that bootlogo. If not...there must be some hardware problem.
Click to expand...
Click to collapse
Well, it looks like Odin is just sitting at the "aboot.mbn" part of the flashing process :L thoughts?
nulledbyme said:
Well, it looks like Odin is just sitting at the "aboot.mbn" part of the flashing process :L thoughts?
Click to expand...
Click to collapse
It just sits there? No errors? Maybe you should try a different version of odin, like Odin 3.09
You could also try another usb port and/or different cable. Those are the most common problems when flash won't start.
tys0n said:
It just sits there? No errors? Maybe you should try a different version of odin, like Odin 3.09
You could also try another usb port and/or different cable. Those are the most common problems when flash won't start.
Click to expand...
Click to collapse
I'll give those tips a try I'm also trying Samsung Smart Switch to see if it'll do something.
nulledbyme said:
I'll give those tips a try I'm also trying Samsung Smart Switch to see if it'll do something.
Click to expand...
Click to collapse
Yeah you can do that too. Another thing you've reminded me of now when talking about smart switch...Go to your task manager on pc and make sure that no smart switch or kies is running in background before open odin. It may interfere with odin connection.
I remember it was a common problem with kies/odin.
tys0n said:
Yeah you can do that too. Another thing you've reminded me of now when talking about smart switch...Go to your task manager on pc and make sure that no smart switch or kies is running in background before open odin. It may interfere with odin connection.
I remember it was a common problem with kies/odin.
Click to expand...
Click to collapse
I'll try that, I'm still so confused by this. I flash it, and then ODIN says "RESET" in blue, it resets the device and it hangs at the Sprint logo..
nulledbyme said:
I'll try that, I'm still so confused by this. I flash it, and then ODIN says "RESET" in blue, it resets the device and it hangs at the Sprint logo..
Click to expand...
Click to collapse
Yeah, it's a mystery. If it flash and pass without errors it should work. Can't figure out why it doesn't
tys0n said:
Yeah, it's a mystery. If it flash and pass without errors it should work. Can't figure out why it doesn't
Click to expand...
Click to collapse
Well guess what, I ****in fixed it haha. I just reset after the flash and it's working now! Thanks for all your help man!
nulledbyme said:
Well guess what, I ****in fixed it haha. I just reset after the flash and it's working now! Thanks for all your help man!
Click to expand...
Click to collapse
That's awesome! Glad I could help.