Hello.
My English is quite bad, and I'm sorry for that. Anyway, I hope that someone of you can help me with my problem, and will understand what I wanted to say.
So, at first I unlocked bootloader. After that, with InsecureBootandRoot script I wanted to root phone. When I did it, in "cmd" it stuck on "Daemon started successfully".
From then, I can't run my phone. Bootloader is working, fastboot USB aswell. I tried to install few recoverys, but none of them were working. ADB is also not working, it can't see my device(Probably because it's not working in fastboot. And if my phone is not in fastboot, computer don't recognise my device). Also, I can't "throw" any files to phone because computer see my device only in fastboot.
I tried to use HTC ONE S AIO kit . It show me my CID(HTC 0_32) and version(3.16.401.8), but that's all. Other commands are not working at all.
I also installed sdk and all drivers. That didn't help, meh.
Any ideas what should I do to have my phone working again? :c
Pisay said:
Hello.
My English is quite bad, and I'm sorry for that. Anyway, I hope that someone of you can help me with my problem, and will understand what I wanted to say.
So, at first I unlocked bootloader. After that, with InsecureBootandRoot script I wanted to root phone. When I did it, in "cmd" it stuck on "Daemon started successfully".
From then, I can't run my phone. Bootloader is working, fastboot USB aswell. I tried to install few recoverys, but none of them were working. ADB is also not working, it can't see my device(Probably because it's not working in fastboot. And if my phone is not in fastboot, computer don't recognise my device). Also, I can't "throw" any files to phone because computer see my device only in fastboot.
I tried to use HTC ONE S AIO kit . It show me my CID(HTC 0_32) and version(3.16.401.8), but that's all. Other commands are not working at all.
I also installed sdk and all drivers. That didn't help, meh.
Any ideas what should I do to have my phone working again? :c
Click to expand...
Click to collapse
There is no matching RUU, but i will upload you the matching boot+recovery. Will take some minutes. Download both files and flash them via fastboot.
DOWNLOAD
I should add that my phone is S3.
Anyway thanks for the answer, didn't knew someone is going to help me so fast :3.
pisay said:
i should add that my phone is s3.
Anyway thanks for the answer, didn't knew someone is going to help me so fast :3.
Click to expand...
Click to collapse
then dont flash the files. I'll have a look for the matching files.
Are you sure you have a ville c2 (S3) ??? Because 3.16.401.8 is the official EU S4 Jellybean release...
---------- Post added at 09:26 PM ---------- Previous post was at 09:17 PM ----------
LS.xD said:
then dont flash the files. I'll have a look for the matching files.
Are you sure you have a ville c2 (S3) ??? Because 3.16.401.8 is the official EU S4 Jellybean release...
Click to expand...
Click to collapse
You can see your model ID here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whats your MID??
oh well, I'm quite shocked.
When I bought this phone, they told me that it's 560e.
But I looked now, and it's Z520e.
Sorry for that, didn't knew that I have S4. Can you upload files for S4 again?
Pisay said:
oh well, I'm quite shocked.
When I bought this phone, they told me that it's 560e.
But I looked now, and it's Z520e.
Sorry for that, didn't knew that I have S4. Can you upload files for S4 again?
Click to expand...
Click to collapse
You're lucky LINK S4 files
If you say so ._.
I flashed them, what should I do now?
Pisay said:
If you say so ._.
I flashed them, what should I do now?
Click to expand...
Click to collapse
Phone should be fine again
Well, I still can't turn it on.
My computer still can't see him.
I can't describe it as "working phone" ;_;
Recovery also still not working.
Pisay said:
Well, I still can't turn it on.
My computer still can't see him.
I can't describe it as "working phone" ;_;
Recovery also still not working.
Click to expand...
Click to collapse
May you post a link to the software you have flashed to your phone?
Have you already tried PhilZ recovery? --> LINK
Dunno if I can paste links here.
Anyway I was trying to root my phone with this tutorial: http://theunlockr.com/2012/04/22/how-to-root-htc-one-x/ .
*Yeah, I'm stupid and I thought my phone is HTC ONE X, not HTC ONE S*
@edit
This recovery is also not working.
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 <- I have this RUU on PC. Will it work on my phone?
You have the wrong CID for the RUU.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
---------- Post added at 09:55 PM ---------- Previous post was at 09:55 PM ----------
Did you perform "factory reset" in bootloader Mode already?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Yeah, I already tried that. It stuck on logo then, like with recovery.
Pisay said:
Yeah, I already tried that. It stuck on logo then, like with recovery.
Click to expand...
Click to collapse
I have checked the link. The script "only" flashes a kernel (boot.img) + Superuser app. Flashing a new kernel should work for you. What command did you use to flash the boot.img ??
fastboot flash boot boot.img and then fastboot flash boot recovery.img
I'll try uninstalling sdk and all drivers, and then install them using tutorial from this forum. Maybe it will be easier, when adb will work .-.
Pisay said:
fastboot flash boot boot.img and then fastboot flash boot recovery.img
I'll try uninstalling sdk and all drivers, and then install them using tutorial from this forum. Maybe it will be easier, when adb will work .-.
Click to expand...
Click to collapse
Did you restart the bootloader after flashing? Have you cleared caches via fastboot also??
BTE adb will not help you without at least a working recovery...
Which command I should use to restart it?
And yeah, I cleared caches.
And thanks for trying to help me, I really appreciate it. U're wasting your time because some teenager destroyed his phone ._. . Oh god, I'm stupid.
@edit
When I tried to run bootloader, it showed me this:
Thats PhilZ CWM Perfect, you have a working recovery I'm off for 30 minutes. I can assisst you via Teamviewer when i'm back, if you want.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Not at all, these commands under it mean that anything in recovery won't work.
Also, from now I can't even start bootloader ._. .
Oh well, I'll just give this phone to the service. If they can't turn it on, and also turn on bootloader, can they say to me something like "Hey, you tried to change system of this phone so we won't give you another one"?. :c
Pisay said:
Not at all, these commands under it mean that anything in recovery won't work.
Also, from now I can't even start bootloader ._. .
Oh well, I'll just give this phone to the service. If they can't turn it on, and also turn on bootloader, can they say to me something like "Hey, you tried to change system of this phone so we won't give you another one"?. :c
Click to expand...
Click to collapse
Philz has a option to boot into bootloader. Have you tried it? If you give it to service they'll recognize that you have modified thze phone. As you were able to flash philz, you should also be able to flash boot+recovery image. Then you'll have to perform "factory reset + clear storage" to fix the sd card issue. I'm sure its possible! Once done you can install a rom manually or change the CID to run a stock RUU EU unbranded.
As your warranty is void I'd suggest to fix it o ya own
Related
Ok so i followed all instructions on a few different pages on using odin to flash in stock, but nothing i do seems to work, every time i try using odin it fails, ive tried using different usb cords, redownloading the files, downloading them from different sources, nothing seems to work, it was bricked when i tried to flash in cwm, i dont know if i was supposed to root first, but that aside, nothing seems to be working.
jimmy2989 said:
Ok so i followed all instructions on a few different pages on using odin to flash in stock, but nothing i do seems to work, every time i try using odin it fails, ive tried using different usb cords, redownloading the files, downloading them from different sources, nothing seems to work, it was bricked when i tried to flash in cwm, i dont know if i was supposed to root first, but that aside, nothing seems to be working.
Click to expand...
Click to collapse
can you still get into download mode?
jimmy2989 said:
Ok so i followed all instructions on a few different pages on using odin to flash in stock, but nothing i do seems to work, every time i try using odin it fails, ive tried using different usb cords, redownloading the files, downloading them from different sources, nothing seems to work, it was bricked when i tried to flash in cwm, i dont know if i was supposed to root first, but that aside, nothing seems to be working.
Click to expand...
Click to collapse
What are you using? Gingerbread or ICS? Remember there are two different ways to root this device. One for each version as mentioned earlier. What did you flash in CWM? Superuser? Need to be more specific..
woodzx67 said:
can you still get into download mode?
Click to expand...
Click to collapse
im_awesome_right? said:
What are you using? Gingerbread or ICS? Remember there are two different ways to root this device. One for each version as mentioned earlier. What did you flash in CWM? Superuser? Need to be more specific..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2269071
He forgot to unclick "repartition" in Odin.
OP, Have you tried removing and reinstalling the drivers? It might not help, but it can't hurt.
Romman0 said:
http://forum.xda-developers.com/showthread.php?t=2269071
He forgot to unclick "repartition" in Odin.
OP, Have you tried removing and reinstalling the drivers? It might not help, but it can't hurt.
Click to expand...
Click to collapse
i was on stock gingerbread, the first time when i was trying to root and i flashed in cwm i didnt forget to unclick the repartition, it was the last time. Yes i can get into download mode, but its the firmware upgrade fail download mode
Anyway, ive used different usb cords, tryed different downloads, different versions of odin, is it possible to just install a custom rom from soft brick as it is now?
follow this
http://forum.xda-developers.com/showthread.php?p=41446107#post41446107
jparnell8839 said:
follow this
http://forum.xda-developers.com/showthread.php?p=41446107#post41446107
Click to expand...
Click to collapse
It fails at nand write start when trying to install clockworkmod the same as flashing to stock
jimmy2989 said:
It fails at nand write start when trying to install clockworkmod the same as flashing to stock
Click to expand...
Click to collapse
are you on windows? in your device manager, do you see this when plugged in and in download mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if not, download and install the samsung drivers
jparnell8839 said:
are you on windows? in your device manager, do you see this when plugged in and in download mode?
if not, download and install the samsung drivers
Click to expand...
Click to collapse
i comes up as samsung usb composite device, but its there
jimmy2989 said:
i comes up as samsung usb composite device, but its there
Click to expand...
Click to collapse
download this, uninstall what you see there in device management (right click, uninstall device) and run the executable. go back into download mode, try again
jparnell8839 said:
download this, uninstall what you see there in device management (right click, uninstall device) and run the executable. go back into download mode, try again
Click to expand...
Click to collapse
Did that and it just shows the exact same thing, doing the exact same thing.
jimmy2989 said:
Did that and it just shows the exact same thing, doing the exact same thing.
Click to expand...
Click to collapse
Give me a little bit to research... sounds like NAND rw corruption... I'll see if I can find stock everything to see if we can fix it.
---------- Post added at 02:01 PM ---------- Previous post was at 01:57 PM ----------
jparnell8839 said:
Give me a little bit to research... sounds like NAND rw corruption... I'll see if I can find stock everything to see if we can fix it.
Click to expand...
Click to collapse
you dont happen to have Kies installed do you? If so, KILL IT WITH FIRE!
jparnell8839 said:
Give me a little bit to research... sounds like NAND rw corruption... I'll see if I can find stock everything to see if we can fix it.
---------- Post added at 02:01 PM ---------- Previous post was at 01:57 PM ----------
you dont happen to have Kies installed do you? If so, KILL IT WITH FIRE!
Click to expand...
Click to collapse
First, no kies isnt installed, kies is the devil, and i believe i figured out what the major problem is, according to the box that the phone was in, its a galaxy s blaze 4g, but i was doing some searching online and it looks like the phone is just a galaxy s 4g, sgh-t959v is on the phone, not sgh-t959, i might be wrong but it looks like ive been using the wrong software for the problem.
jimmy2989 said:
First, no kies isnt installed, kies is the devil, and i believe i figured out what the major problem is, according to the box that the phone was in, its a galaxy s blaze 4g, but i was doing some searching online and it looks like the phone is just a galaxy s 4g, sgh-t959v is on the phone, not sgh-t959, i might be wrong but it looks like ive been using the wrong software for the problem.
Click to expand...
Click to collapse
For this particular forum, only the SGH-T769 will work with our Odin methods/downloads. You still probably corrupted the NAND rw flashing ours, but at least you know what to do from here on out
Go here http://forum.xda-developers.com/showthread.php?t=1480418 and you should be good to go. remember to download the Odin there, I'm pretty sure each version is phone specific to a small degree. and let us know how it goes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
General Info
Hello all. I had some cm code lying around a couple months ago, so decided to try to compile twrp for the desire. I ended up failing miserably, however what i got out of this was a decently working build of ClockworkMod touch. All credits go to Koush and the rest of cm team who worked on originally creating cwm. All i did was compile it using the latest code (at the time) and run it through the cm jenkins build server to get the touch functionality. It honestly wasnt very hard, so dont thank me too much Anyways, this probably wont be the most popular due to the fact that 4ext seems to be the go-to recovery for the desire, but i thought I'd share anyways rather than leaving it on my desktop for the rest of eternity. Some people might actually like it as afaik the latest available version for the desire is 5.8.0.2 (feel free to correct me if im wrong) so this is a pretty nice upgrade i guess. Enjoy
Downloads
CWM Touch 6.0.3.5
-Dev-Host
-Mediafire
-md5 checksum: dc4a4067ae7fc8456034293cad5cc76a
CWM 6.0.4.5 with Touch Swipe Controls
-Dev-Host
-md5 checksum: e5308a41d96a4cd94c97a07ad83ed223
Bugs
-When you boot into it, you get a message saying "Warning: no file_contexts" for a couple of seconds before the recovery menu comes up. This seems to be harmless.
-Let me know if you find anything else
Instructions
1. Setup fastboot and install these drivers.
2. Download the provided recovery.img file and put it on your desktop. Check that the md5 checksum is correct.
3. Turn your phone off. Boot it into fastboot using back button + power button, then plug it into your computer. On your phone it should now say "FASTBOOT USB".
4. Open command prompt and enter the following commands:
Code:
fastboot devices
If your phone (serial number) shows up continue. If not, it means that your drivers aren't installed correctly and your computer cannot recognize the phone. Do not continue until you are able to get fastboot devices to return the serial number of your phone.
Code:
cd Desktop
Code:
fastboot flash recovery FilenameOfRecovery.img
After the installation is finished, proceed to the next step. (it should only take a few seconds to install)
5. Unplug the phone, and go back into the bootloader. From there you can scroll down to RECOVERY, and boot into it.
Thats great
I think it was possible to create spare backups (or whatrver its called, it just backups changed files) with that version, right?
I will try it later @home.
Tapatalked... just Tapatalked...
---------- Post added at 05:37 PM ---------- Previous post was at 04:37 PM ----------
I tested and it cant mount my sdext
I am back on 4ext for now, but will test it again when thats fixed
Tapatalked... just Tapatalked...
Nice one Chromium!
Challenge: Port 4ext to the Nexus 4
abaaaabbbb63 said:
Nice one Chromium!
Challenge: Port 4ext to the Nexus 4
Click to expand...
Click to collapse
Yea that'd be cool. Is it open source?
Sent using xda-developers app
Chromium_ said:
Yea that'd be cool. Is it open source?
Sent using xda-developers app
Click to expand...
Click to collapse
Sadly, nope.
abaaaabbbb63 said:
Sadly, nope.
Click to expand...
Click to collapse
Aww thats unfortunate. I thought i read somewhere that with the next generation of 4ext there would be plans to add support for newer devices such as the n4, but the developer seems to have slowed down.
I just realized that this actually has a decent amount of downloads considering how dead this thread is.
Is anyone interested in the latest cwm (6.0.4.5) with swipe controls?
Sent using xda-developers app
Chromium_ said:
I just realized that this actually has a decent amount of downloads considering how dead this thread is.
Is anyone interested in the latest cwm (6.0.4.5) with swipe controls?
Sent using xda-developers app
Click to expand...
Click to collapse
Me! I always welcome new things for my desire
Sent from my HTC Desire using xda app-developers app
siavash2death said:
Me! I always welcome new things for my desire
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Cool. Here it is: http://www.mediafire.com/download/13ewob2hhhdfiri/recovery6.img
Currently the swipe controls are only working with up/down (scrolling), but swiping left/right isnt working so you need to use the trackpad to select.
it doesnt work for me (see attachment) what i should do? :/ please, i would like to install 4.4 android
PS: i have rooted phone and i have USB debugging ON
Thank you
t0msk said:
it doesnt work for me (see attachment) what i should do? :/ please, i would like to install 4.4 android
PS: i have rooted phone and i have USB debugging ON
Thank you
Click to expand...
Click to collapse
Do you have s-off?
Sent using xda-developers app
Chromium_ said:
Do you have s-off?
Sent using xda-developers app
Click to expand...
Click to collapse
no i have S-ON but i have root and i flashed lot of ICS roms
So my question how can i easily turn S-ON to S-OFF?
If u have a time u can contact me on skype... my skype is tomsk123 it can be faster
Thx
t0msk said:
no i have S-ON but i have root and i flashed lot of ICS roms
So my question how can i easily turn S-ON to S-OFF?
If u have a time u can contact me on skype... my skype is tomsk123 it can be faster
Thx
Click to expand...
Click to collapse
http://revolutionary.io/
MarekAG said:
http://revolutionary.io/
Click to expand...
Click to collapse
how can i get beta key from my serial number
t0msk said:
how can i get beta key from my serial number
Click to expand...
Click to collapse
Please stop being noob and start to read
"Run the Revolutionary utility; that will give you all the information needed to fill in the form below."
MarekAG said:
Please stop being noob and start to read
"Run the Revolutionary utility; that will give you all the information needed to fill in the form below."
Click to expand...
Click to collapse
Yea thx its done i had disabled javascript
THX!
V6.0.3.5 was fine, but V6.0.4.5 was not that great, you must select options and zips with trackpad, I always felt like I'm working with amon ra recovery or rmd recovery. CWm recovery was normal, but for having more features, I prefer 4ext recovery, rmd recovery (to flash hboot and other images through recovery that is very useful) and twrp, that is very easy to use. I found a bug (I think) in V6.0.4.5 that was unable to detect and wipe sd-ext.(error: something like wrong path(sd-ext). One error that is annoying in trwp (maybe only for me) is that it hasn't the yes or no feature. For example: wifix, that when you want to flash, you don't see the option to choose yes or no. By the way, thank you chromium. Very good effort.
Sent from my HTC Desire using xda app-developers app
Hey guys, i just compiled TWRP 2.6.3.0 and it boots successfully, touch is working, and all the basic stuff seems fine. If anyone would like to help me thoroughly test it out (ie: flashing zips, wiping, nandroids, etc.) send me a PM and ill give you the image.
Thanks
Chromium_ said:
Hey guys, i just compiled TWRP 2.6.3.0 and it boots successfully, touch is working, and all the basic stuff seems fine. If anyone would like to help me thoroughly test it out (ie: flashing zips, wiping, nandroids, etc.) send me a PM and ill give you the image.
Thanks
Click to expand...
Click to collapse
Anyone?
Sent using xda-developers app
i can't find a methood that can help me to install the TWRP recovery.
i triend anything but nothing helps.
can someone help me with it? with how to install TWRP recovery?
i have nexus 5 5.0.1 stock without root and open bootloader
Someone should really take the time to write helpful guides and make them sticky threads.
ohad123454 said:
i can't find a methood that can help me to install the TWRP recovery.
i triend anything but nothing helps.
can someone help me with it? with how to install TWRP recovery?
i have nexus 5 5.0.1 stock without root and open bootloader
Click to expand...
Click to collapse
@jd1639 "fastboot boot twrp.img. It'll work. Then flash supersu, then fastboot flash recovery twrp.img. Don't ask me why this works because I don't know. But it works everytime with lollipop"
This is it.
Ye but i should open a promt command window? I meam where do i put this command?
Amd by the way i didn't gst it, after i put the first comman i have the recocery and then via the recovery i flash Supersu and then im going on flash mode again and put the second command?
ohad123454 said:
Ye but i should open a promt command window? I meam where do i put this command?
Amd by the way i didn't gst it, after i put the first comman i have the recocery and then via the recovery i flash Supersu and then im going on flash mode again and put the second command?
Click to expand...
Click to collapse
Ah. That's the problem. @pepdavies "Someone should really take the time to write helpful guides and make them sticky threads."
This is it.
You still didn't help me, it's been a while since i did all the root and flashing and i forgot, can you help me Or not?
zagorteney said:
Ah. That's the problem. @pepdavies "Someone should really take the time to write helpful guides and make them sticky threads."
This is it.
Click to expand...
Click to collapse
pepdavies said:
Someone should really take the time to write helpful guides and make them sticky threads.
Click to expand...
Click to collapse
The thing is that when i try to do the commands i get this picture:
and by the way my phone is got stucked [i put the command and then on the phone it says "downloading..." and get stuck] i tried it multiple times
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ohad123454 said:
You still didn't help me, it's been a while since i did all the root and flashing and i forgot, can you help me Or not?
Click to expand...
Click to collapse
I can, but I won't. This will: http://forum.xda-developers.com/showthread.php?t=2588979
zagorteney said:
I can, but I won't. This will: http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
Already did it, it does'nt help either
I know many here at XDA frown on using toolkit's, but if you having problems try
Wug's Nexus Root Toolkit. Its free and works fantastic.
http://forum.xda-developers.com/showthread.php?t=1766475
It will install custom recovery. Just install the toolkit, select your phone model and let it download the needed dependency's then click the advanced button,
then look under Fastboot Flash for the recovery button and follow the prompts to install TWRP.
Best of Luck
---------- Post added at 07:34 AM ---------- Previous post was at 07:18 AM ----------
One other thought.
Because It looks like you are doing things correctly.
Sometimes changing your USB cable to Hi quality one will help
as cables can sometimes work fine for charging but not work well for flashing.
joegestes said:
I know many here at XDA frown on using toolkit's, but if you having problems try
Wug's Nexus Root Toolkit. Its free and works fantastic.
http://forum.xda-developers.com/showthread.php?t=1766475
It will install custom recovery. Just install the toolkit, select your phone model and let it download the needed dependency's then click the advanced button,
then look under Fastboot Flash for the recovery button and follow the prompts to install TWRP.
Best of Luck
---------- Post added at 07:34 AM ---------- Previous post was at 07:18 AM ----------
One other thought.
Because It looks like you are doing things correctly.
Sometimes changing your USB cable to Hi quality one will help
as cables can sometimes work fine for charging but not work well for flashing.
Click to expand...
Click to collapse
It's not the destination, it's the journey that counts.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
It's not the destination, it's the journey that counts.
Click to expand...
Click to collapse
You Sir, are correct.
I just knew I would take some heat for suggesting the sacrilegious toolkit :laugh:
flame away LOL
Hi, sorry if this is a stupid question, but I just noticed Sprint pushed an OTA for 6.0.1 to my stock rooted device (S-on) and I'm just trying to figure out what the best way to get this OTA is going to be. I'm assuming I shouldn't download and install the OTA as-is due to the TWRP recovery and root.
After looking around a bit, it seems like the only option available is to use a stock 6.0.0 RUU file in the bootloader and basically reset the entire device back to factory settings (losing all apps and data in the process presumably), installing the OTA, then re-flashing TWRP and re-rooting.
I guess what I'm asking is - 1. is this the correct way to go about doing this? and 2. is there any better alternative perhaps that doesn't involve losing my data?
Thanks in advance guys.
Been googling around for the last few days and scouring this board for just as long and still haven't come to a definitive conclusion. From what little I've seen the documentation on this seems kind of spotty and I'm just wondering which direction to head in. Any help on this would be much appreciated.
Safest way.. ruu back to stock everything take ota and re root/download apps etc...
Thanks for the reply, man.. Thats kind of what I had gathered pouring over all these articles and board posts. I went ahead and RUU'd back to 1.10.651.1 for sprint.. Literally just moments ago though I downloaded the OTA and hit install and got presented with an error screen during the update. Phone rebooted back into the system normally, and I went to check the version # only to see it unchanged, along with a prompt to install the OTA for 1.57.651.1 again.
Any idea why this might've happened or how to remedy it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wonders_Never_Cease said:
Safest way.. ruu back to stock everything take ota and re root/download apps etc...
Click to expand...
Click to collapse
What was the error? You may have to relock bootloader to accept the ota...unsure of how they are with their device,GSM device I have doesnt need relocked...(S-Off as well so)
---------- Post added at 12:50 AM ---------- Previous post was at 12:47 AM ----------
Also the 1.57.651.1 RUU is available... Why not use it?
http://dl3.htc.com/application/RUU_HIA_AERO_WHL_M60_SENSE7GP_SPCS_MR_Sprint_WWE_1.57.651.1_R2.exe
Thats the weird part, it didnt give an error message, just that icon in the image I added to my last post. forelock the bootloader would be kind of surprising... Might give that a try in the morning after I find out if it can be re-unlocked.
EDIT: Ohhh I just saw your last edit, i didnt see that before, i'll use that then. Thank you!!!
Wonders_Never_Cease said:
What was the error? You may have to relock bootloader to accept the ota...unsure of how they are with their device,GSM device I have doesnt need relocked...(S-Off as well so)
---------- Post added at 12:50 AM ---------- Previous post was at 12:47 AM ----------
Also the 1.57.651.1 RUU is available... Why not use it?
http://dl3.htc.com/application/RUU_HIA_AERO_WHL_M60_SENSE7GP_SPCS_MR_Sprint_WWE_1.57.651.1_R2.exe
Click to expand...
Click to collapse
Download the .651 ruu,reboot phone into download mode and run it... Should be up to date after that for a bit id think
---------- Post added at 12:58 AM ---------- Previous post was at 12:53 AM ----------
How did you unlock it to begin with? HTC Dev site? If so then should be able to use the same unlocktoken.bin from before... Or can resubmit and get another one...
txag2011 said:
Thats the weird part, it didnt give an error message, just that icon in the image I added to my last post. forelock the bootloader would be kind of surprising... Might give that a try in the morning after I find out if it can be re-unlocked.
EDIT: Ohhh I just saw your last edit, i didnt see that before, i'll use that then. Thank you!!!
Click to expand...
Click to collapse
Thats precisely what I did. Unlocked it with the HTC Dev Token. I gotta admit, I was pretty surprised that I had an OTA so soon after getting the phone and unlocking / rooting it. Just when I had everything set up how I liked it
I just finished flashing the 651 RUU and its just optimizing the apps now, but looks like it should do it!
Wonders_Never_Cease said:
Download the .651 ruu,reboot phone into download mode and run it... Should be up to date after that for a bit id think
---------- Post added at 12:58 AM ---------- Previous post was at 12:53 AM ----------
How did you unlock it to begin with? HTC Dev site? If so then should be able to use the same unlocktoken.bin from before... Or can resubmit and get another one...
Click to expand...
Click to collapse
Cool glad got it sorted...
txag2011 said:
Thats precisely what I did. Unlocked it with the HTC Dev Token. I gotta admit, I was pretty surprised that I had an OTA so soon after getting the phone and unlocking / rooting it. Just when I had everything set up how I liked it
I just finished flashing the 651 RUU and its just optimizing the apps now, but looks like it should do it!
Click to expand...
Click to collapse
Actually.. I've hit another wall now tryign to achieve root with this. I've got TWRP back on the device, and I'm using WinDroid Toolkit to flash SuperSU to it. It'll show that it's pushing it, then drop into recovery and naturally ask for me to wipe the /data partition since it's encrypted, before proceeding to install the supersu.zip package.
The only problem is, there doesn't appear to be any supersu.zip anywhere on the device once it gets into recovery, either before or after the data wipe. Any idea where it's going?
Wonders_Never_Cease said:
Cool glad got it sorted...
Click to expand...
Click to collapse
First thing ya need to do is read how to install adb and fastboot and get away from toolkits... Download 2.67 from this thread...copy to device flash through twrp...
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
txag2011 said:
Actually.. I've hit another wall now tryign to achieve root with this. I've got TWRP back on the device, and I'm using WinDroid Toolkit to flash SuperSU to it. It'll show that it's pushing it, then drop into recovery and naturally ask for me to wipe the /data partition since it's encrypted, before proceeding to install the supersu.zip package.
The only problem is, there doesn't appear to be any supersu.zip anywhere on the device once it gets into recovery, either before or after the data wipe. Any idea where it's going?
Click to expand...
Click to collapse
And didnt mean that in a snotty,sarcastic way... Those tools sometimes cause issues that could be avoided is all I was getting at...
I want to join this conversation.
The A9 of my mom got is a Vodaphone UK version (cid: vodap001) and got the update message to version 1.62.161.2
I've rooted the device and installed TWRP.
So now i relocked the bootloader, installed the firmware.zip that was inside the OTA Download which i've copied from Update-App Path.
If i now want to manualy update the OTA-zip with fastboot in download-mode, i got Error 7.
If i want to update with original OTA updater Up, it stops at 25% with the red cross.
So what should i do now?
There is noch previous RUU-file for this firmware-version thats why i've already updated to the recovery from this OTA-update.
I hope someone can help with it.
Thanks,
Bond
txag2011 said:
Actually.. I've hit another wall now tryign to achieve root with this. I've got TWRP back on the device, and I'm using WinDroid Toolkit to flash SuperSU to it. It'll show that it's pushing it, then drop into recovery and naturally ask for me to wipe the /data partition since it's encrypted, before proceeding to install the supersu.zip package.
The only problem is, there doesn't appear to be any supersu.zip anywhere on the device once it gets into recovery, either before or after the data wipe. Any idea where it's going?
Click to expand...
Click to collapse
I have to agree with Wonders_never_cease about the toolkits. I have used many different ones and they are great from a few things but not all things go right using them unlike adb/fastboot. You should have better results from using adb/fastboot here.
That being said.....it would be easier to achieve root by simply going to full stock using RUU or system/boot.img in fastboot, flashing TWRP, format data, reboot into TWRP, flash supersu 2.74 from your SD card either by itself to obtain normal root or follow steps here http://forum.xda-developers.com/showpost.php?p=63197935&postcount=2 for systemless root. it's that simple...or at least was for me. I never could get pushing supersu through adb right or to work really.
---------- Post added at 10:12 AM ---------- Previous post was at 09:59 AM ----------
Bond246 said:
I want to join this conversation.
The A9 of my mom got is a Vodaphone UK version (cid: vodap001) and got the update message to version 1.62.161.2
I've rooted the device and installed TWRP.
So now i relocked the bootloader, installed the firmware.zip that was inside the OTA Download which i've copied from Update-App Path.
If i now want to manualy update the OTA-zip with fastboot in download-mode, i got Error 7.
If i want to update with original OTA updater Up, it stops at 25% with the red cross.
So what should i do now?
There is noch previous RUU-file for this firmware-version thats why i've already updated to the recovery from this OTA-update.
I hope someone can help with it.
Thanks,
Bond
Click to expand...
Click to collapse
You will not be able to apply the OTA update if you are not completely stock including being with stock recovery. Having your bootloader unlocked will not be an issue so no need to relock it like you did. Use a system/boot/recovery.img to restore stock completely, or whatever RUU need. Then accept the OTA or flash it manually, then reroot. Thats really the only way you will be able to get that to work.....
mcbright80 said:
You will not be able to apply the OTA update if you are not completely stock including being with stock recovery. Having your bootloader unlocked will not be an issue so no need to relock it like you did. Use a system/boot/recovery.img to restore stock completely, or whatever RUU need. Then accept the OTA or flash it manually, then reroot. Thats really the only way you will be able to get that to work.....
Click to expand...
Click to collapse
Thanks for your answer.
But how to get complete stock without nandroid or RUU?
The Firmware.zip of the 1.62.161.2 OTA Update was installed without Errors. But as i already mentioned i Need stock System/boot-files of my last Version (1.62.161.1) to get this partitions to stock. And they are not available anywhere.
Bond246 said:
Thanks for your answer.
But how to get complete stock without nandroid or RUU?
The Firmware.zip of the 1.62.161.2 OTA Update was installed without Errors. But as i already mentioned i Need stock System/boot-files of my last Version (1.62.161.1) to get this partitions to stock. And they are not available anywhere.
Click to expand...
Click to collapse
Ah so sorry, it was 4 am when i was replying so i missed that part on it installing correct, or confused it with the other question i was replying to at that same time haha......anyhoo....i looked for you as well and nothing was found on my end as well so I think you may be in the exact situation i was in when i bought the sprint variant of the A9. HTC has faults like all companies but the one that really pisses me off is their lack of proper support on ALL variants especially concerning firmware. The phone was released and i found NO RUU on their site or anywhere online and of course not many people had my specific variant which meant no one on here or anywhere had the means to get me the stock firmware i too needed to restore my phone.
The ONLY reason anyone here, who has SPRINT US VERSION, is able to then and NOW get the RUU on the HTC website is directly due to my incessant badgering and yelling at HTC damn near daily about having a handset on the market for sale but no firmware for it in case of tech service needs. You may have to do the same thing sadly.
I assume you have checked htc UK site for the rom downloads......contact their tech support and see whats up. Till then, like i had to when the sprint version came out....you'll have to just keep checking back on here and anywhere online for someone else who may post what you need or some other kind of solution.
Thanks mcbright80,
as you already said, HTC resists and says RUUs are only available in the US. I'm excited on their reaction that there are still lower RUU-versions of my UK-edition.
It is an annoying mess with all these different versions for tons of carriers, countrys and so on.
SU4TL-49 Stock Image for XT1254: https://mega.nz/#!TwYShBCb!OFxwiUnUO2MiOHEVc8XluNP1uPSf5tTBaVdmyZ-mwSA
This package will flash every image in the SU4TL-49 firmware package except for recovery. It should bring your phone to almost 100% stock. The only image that is not included is the recovery image, because that would overwrite TWRP. If you need the stock recovery, download this: https://mega.nz/#!LwhxyCaZ!NZVi3pA77t7Qlxm1gFQr340SHurOAJEhDQsiR8QFbMc. Install it using the Install Image option in TWRP.
Yes, it does include modems.
No, it will not re-lock your bootloader.
No, it won't erase your data, but you should do a factory reset in TWRP after flashing this. You might be able to get away without it if you're coming from a modified stock rom, but if you leave out the factory reset after coming from a CM-based rom, you're gonna have a bad time.
Deodexed version here for those who may want it: https://mega.nz/#!zxAEHJjS!hqNDjOGJoE3eI3rwL48h45Lovj764quxFsWP9IsN_Z4
If you need the full, non-TWRP version, here it is: https://mega.nz/#!ao4zmQQB!T2VClxKcTb-ePAhHotvlSR3NCxG0tRY1YEhMtti_H3k
If you get errors while flashing this, try using TWRP Mod 3 instead of Mod 4.
Used this today. Was coming from CM 13. Only notes I had are:
1. Make sure you use the Wipe from the main menu of TWRP and not just the available wipe after you install.
a. Caused my phone to boot but go black after this first half of the boot animation.
2. It asks to uninstall some Motorola services and that will persist. Not sure why but, I did uninstall them.
Overall, it works very well (only up and running 2.5 hours now so I'll have to wait and see if anything happens over the next day or so)
Thanks for this package and all your work...
Nice! Thanks a lot!
rjansen110 said:
Used this today. Was coming from CM 13. Only notes I had are:
1. Make sure you use the Wipe from the main menu of TWRP and not just the available wipe after you install.
a. Caused my phone to boot but go black after this first half of the boot animation.
2. It asks to uninstall some Motorola services and that will persist. Not sure why but, I did uninstall them.
Overall, it works very well (only up and running 2.5 hours now so I'll have to wait and see if anything happens over the next day or so)
Thanks for this package and all your work...
Click to expand...
Click to collapse
1. Yeah, that's kind of what I meant by the last sentence of the OP.
2. That always happens whenever you go from CM to stock. It's harmless.
So when I try to install this, it keeps coming back to me saying no OS is installed. I'm using twrp and have followed the instructions. Should I redownload the zip?
Sent from my XT1254 using XDA-Developers mobile app
joeriv5692 said:
So when I try to install this, it keeps coming back to me saying no OS is installed. I'm using twrp and have followed the instructions. Should I redownload the zip?
Sent from my XT1254 using XDA-Developers mobile app
Click to expand...
Click to collapse
I've seen that message before. I just rebooted to system anyway, and it booted just fine. Not sure why it shows up.
TheSt33v said:
I've seen that message before. I just rebooted to system anyway, and it booted just fine. Not sure why it shows up.
Click to expand...
Click to collapse
Ok, Ill give it a try. I was just afraid of moving forward and soft bricking my phone. Thanks alot.
---------- Post added at 07:56 PM ---------- Previous post was at 07:11 PM ----------
One more thing, If i flash the stock recovery for this....will it take TWRP off my phone? I cracked the **** out of my screen and having a replacement come in from Asurion tomorrow. And would this relock my bootloader? Im trying to make this phone bare stock the day I bought it with out going through computer. Is this possible?
Glad to see the return of @TheSt33v !! Thank you for your work!!
joeriv5692 said:
Ok, Ill give it a try. I was just afraid of moving forward and soft bricking my phone. Thanks alot.
---------- Post added at 07:56 PM ---------- Previous post was at 07:11 PM ----------
One more thing, If i flash the stock recovery for this....will it take TWRP off my phone? I cracked the **** out of my screen and having a replacement come in from Asurion tomorrow. And would this relock my bootloader? Im trying to make this phone bare stock the day I bought it with out going through computer. Is this possible?
Click to expand...
Click to collapse
the answers to "one more thing":
1) yes, if you flash stock recovery it will take TWRP off. 2) it will not relock your bootloader.
edit: ****** 3) it will *not* take away all traces you have modded/hacked/rooted
Stock.
NEXT DAY EDIT: i just restored pretty much stock 5.1 su-44. after all the uninstall crud there, i booted to twrp, and flashed this. all went perfectly. Thank you @TheSt33v !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[emoji92] [emoji95] [emoji95] [emoji95] [emoji95] [emoji109]
edit again: same line added to build.prop enables tethering on this build too.
net.tethering.noprovisioning=true
kitcostantino said:
Glad to see the return of @TheSt33v !! Thank you for your work!!
Click to expand...
Click to collapse
Haha the return? I didn't know I left. There just hasn't been all that much for me to do. Then again, the latest Witcher 3 expansion was running my life for the past few weeks, so maybe I did disappear.
TheSt33v said:
Haha the return? I didn't know I left. There just hasn't been all that much for me to do. Then again, the latest Witcher 3 expansion was running my life for the past few weeks, so maybe I did disappear.
Click to expand...
Click to collapse
TheSt33v said:
Now that we've got some Sunshine in our lives, sadly (not really) it is time for Turboid to be retired. We don't need it anymore.
I think that about covers it. Go forth and flash! Thanks for letting me play dev for a few months
Click to expand...
Click to collapse
Ha ha, brother. I guess i just took this post in the Turboid thread wrong.
-King of Unsolicited Advice
I did a system-only backup in TWRP after updating, so I don't think I need this, buuuut, never hurts to have a 2nd option! 44 did save my bacon so update was possible. ?
Thank you for the De-Odexed build!!!
-King of Unsolicited Advice
Has anyone had issues w this ROM or is it all good?
its all good.
-King of Unsolicited Advice
No luck with de-odexed version
De-odexed version seems to be causing Google Drive to fake load randomly. It'll be doing something, see it flash to Drive at the top with a blank page, then it goes back to what it was before. Was coming from a CM rom, but did do a factory reset via TWRP after installing the rom. Currently trying the non de-odexed version, just waiting for the install to finish.
yeah, i can confirm. same issue. the fix was wiping data for the app via TiBup. i use a transparent google drive, though, and had presumed it was just me.
sgeek7 said:
De-odexed version seems to be causing Google Drive to fake load randomly. It'll be doing something, see it flash to Drive at the top with a blank page, then it goes back to what it was before. Was coming from a CM rom, but did do a factory reset via TWRP after installing the rom. Currently trying the non de-odexed version, just waiting for the install to finish.
Click to expand...
Click to collapse
Weird. I forget, is Drive a system app in the stock rom? If so, maybe try removing it altogether with TiBu and reinstalling it from the play store?
It might be. The non de-odexed version is having no issues on my phone. Thanks for the idea just in case.
Hi, is this include the new .49 bootloader and radio package? or should I install it manually after flashing this rom?
Is anyone having issues with the play store crashing everything you start it up? I flashed the de-odexed and non-de-odexed but play store keeps crashing every time. Any ideas?
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
snugroho3 said:
Hi, is this include the new .49 bootloader and radio package? or should I install it manually after flashing this rom?
Click to expand...
Click to collapse
It's included