Dear all,
Today I dropped my one S on the ground...
Result: a broken front lens glass.
The digitizer is working well, the LCD panel is intact (I think) and the phone is working 100%.
Only the front glass is broken and scratched heavily.
I asked a price for repair on an official repair center: around 200$ (reconverted from EUR).
The repair center told me it is impossible to replace the glass without replacing the whole LCD and digitizer.
I searched the internet and I came on this page: http://www.etradesupply.com/oem-htc-one-s-glass-lens.html
Price: around 15 $ including shipping.
My question is: how is this 'front lens glass' mounted in the phone? Is it mounted with glue?
Or is this just 'pressed' in the case? I don't know exactly how to say it in English, but I think you understand me: just opening the case and replacing it, and the screwes of the case are responsible for the place of the lens glass?
Can I do it by myself?
Does any1 have experience with this?
Is it difficult?
I have a little experience with repairing phones: i repaired a Desire Z with new camera module and LED module, but neither I am an expert.
Thx 4 all!
Pieter
If the digitiser breaks, since our phone is LED you have to replace the screen as well. No two ways about it.
However, if you have the right tools for the job, it shouldn't be overly difficult. Obviously, it goes without saying, your warranty is 100% gone the second you open it up.
Maybe this can help you.
Related
Hello XDA,
My T-Mobile Nexus 5 fell out of my pocket and landed straight on it's face, shattering the screen. It still works, I still use it, but the screen will now need to be replaced.
I am very handy and can do this job myself - if the cost is reasonable. My question is, do I need just the screen which is just $5.95 for a "Black LG Google Nexus 5 D820 D821 Front Screen Glass Lens Replacement Part" on eBay or do I need the whole digitizer assembly, which is $99+ on eBay. I hope it is the former since the screen is still responsive to touch.
Look at your phone closely. Is it just front mirror that's broken? Digitizer screen is behind the front screen. I would post some pictures to see how bad it is.
I would disassemble it and see if it's broken to if you have an extra phone you can use until you get your parts
You should be able to just replace the "front" glass. But I'll pick up something of about 20/30$. I think 6$ is definitly too poor to be a good glass..
Charlus97 said:
You should be able to just replace the "front" glass. But I'll pick up something of about 20/30$. I think 6$ is definitly too poor to be a good glass..
Click to expand...
Click to collapse
There's no way anyone is replacing just the glass and not having a horrible deformed or otherwise irregular phone after gluing or taping it back together again.
Short answer: You need at least the glass + digitizer. Preferably the frame as well to make it easier on yourself.
bblzd said:
There's no way anyone is replacing just the glass and not having a horrible deformed or otherwise irregular phone after gluing or taping it back together again.
Short answer: You need at least the glass + digitizer. Preferably the frame as well to make it easier on yourself.
Click to expand...
Click to collapse
^this. And don't buy the non oem one for 99 bucks. It will be garbage in so many possible ways. Pay the 150 dollars and send it to lg. Replacing the glass only is not easy at all either research loca glue and you'll see. Or read my other posts on why not to do screen repairs yourself with a n5. Trust me pay lg to fix it, you'll save time, headaches, and money.
Unfortunately I crashed display on moto x play...so if anybody now trusted site to buy new one....tnx
Anyone found a display replacement that includes the front cover? Without it, it should be nearly impossible, am I right?
Gesendet von meinem XT1562 mit Tapatalk
I haven't seen any.
I tried combining the components and failed. Broke the circuitry in the LCD when trying to mount the frame...
I asked Motorola what i should do when i dropped my phone and the glas got broken. They told i should send it to their repair service, it was datrepair in Germany maybe its another in other countries. They Arranged everything for me and i paid 120€ for the replacement, just the glass maybe touch but idk, screen was ok when i was sending it in. They even took care of shipping without any cost for me.
Normaly i repair devices by myselfe but in fact the phone was only 1 Month old i refused to it.
If you have a heat gun (or hair dryer) and a set of torx screwdrivers, you should be able to fix it at home. If something is tight, never force it. Use plastic tools to pry open the case, usually comes together with the screwdriver set if you buy them online
pijes said:
If you have a heat gun (or hair dryer) and a set of torx screwdrivers, you should be able to fix it at home. If something is tight, never force it. Use plastic tools to pry open the case, usually comes together with the screwdriver set if you buy them online
Click to expand...
Click to collapse
For that, you would need the lcd including the frame which is nicht available yet...
So atm nearly impossible.
I managed to get some tiny cracks on the edge near the front camera (it fell onto metal from my jacket, i was bending over). Thankfully it's not the touch area, but i now somehow understand why so many people have cracked phones. It happens so quickly. And i was treating it like a raw eggshell, too.
I dropped mine as I was getting out of the car.It cost me R1500 (R is for South African Rand) to replace the screen.The guys who repaired it had to crack the plastic frame to get the screen out .They used glue to keep the new screen in place.I dont think they knew what they were doing,but it was the only repair center that was in the same province as me.
http://www.ebay.com/itm/LCD-Screen-...Assembly-For-Moto-X-Play-XT1562-/351672097858
Finally a full assembly, actually think I am going to try AGAIN. maybe I will make a video on it
There is also a full assembly available on aliexpress. http://www.aliexpress.com/item/5-5-...-1&btsid=5347749e-d1d5-4871-a4c2-dafc85fd700d
I should have checked ebay prior as that one ships from the states and would have got here way quicker.
Jeklund said:
There is also a full assembly available on aliexpress. http://www.aliexpress.com/item/5-5-...-1&btsid=5347749e-d1d5-4871-a4c2-dafc85fd700d
I should have checked ebay prior as that one ships from the states and would have got here way quicker.
Click to expand...
Click to collapse
NewAndreas said:
http://www.ebay.com/itm/LCD-Screen-...Assembly-For-Moto-X-Play-XT1562-/351672097858
Finally a full assembly, actually think I am going to try AGAIN. maybe I will make a video on it
Click to expand...
Click to collapse
Yeah, please make a video it'll help many.
https://www.youtube.com/watch?v=5_yzMPWCQOM This video shows the whole process with a complete display assembly. Its incredibly more difficult if you get the screen without the frame as the screen is affixed to the frame with some sort of adhesive foam.
I also broke my screen and ordered a replacement. Unfortunately I broke the frame in the process of removing the old screen.
Luckily I got my hands on a replacement frame and some 3M 2 milimeters adhesive strips. Praying for everything to work out put together..
Crizzl said:
I also broke my screen and ordered a replacement. Unfortunately I broke the frame in the process of removing the old screen.
Luckily I got my hands on a replacement frame and some 3M 2 milimeters adhesive strips. Praying for everything to work out put together..
Click to expand...
Click to collapse
Best of luck, if you can document the process as there isn't much info out on screen replacements where you affix a new frame to a screen. My frame broke when I dropped my phone which is why I just got the whole unit. Cost me about $62 CAD shipped for the whole unit.
Has anyone here tried a replacement? Any tips?
So is it possible to change just the glass without the whole display unit?
I'm talking bout this part: Outer Screen Glass Replacement
apokolok said:
So is it possible to change just the glass without the whole display unit?
I'm talking bout this part: Outer Screen Glass Replacement
Click to expand...
Click to collapse
So, I tried for myself with my old display after I got a replacement new display including a new frame.
It is absolutely impossible to separate the front glass from the digitizer and display without destroying all three.
I think even a professional wouldn't be able to do it. Display and digitizer are very flexible while the screen is glued really really good to them
I heated it up to no avail. Maybe some glue remover would have helped, but I don't think it would get between the glass and the digitizer.
These phones are just not build to be repared, they are build to be thrown away.
Exchanging the new frame including display was no easy job too, but it can be done.
Be sure to have a high quality Torx T3 screwdriver or bit, the cheap china ones will do nothing but destroy the tiny screws.
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
SolarisSixth said:
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
Click to expand...
Click to collapse
According to this: Ali Express
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the LCD image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
According to that; If the glass is cracked, I only need the Digitizer replaced.
I am happy to get the whole thing, its just I have already ordered a Digitizer and thought this was all I needed. I could be wrong.
Any recommendation on the type of screen I should purchase for best results?
Ali Express Search
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi there
I got the same Problem. Screen and Touch and everything is OK. Did you manage to replace the broken glas? Was the Ebay thing okei or did u buy something different?
Cheers
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Any update on this? I'm in the same situation, front glass is cracked but phone otherwise fine. Replacement is only $10, but can just the glass even be replaced?
I just bought the whole LCD/Digitizer for $60, not even going to attempt to separate just the glass
emanuel.caesar said:
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Click to expand...
Click to collapse
Hey emanuel.caesar,
thanks for your helpful post. A few further questions from my side:
which lcd did you choose exactly? Are you still satisfied with the quality? And the last question Does the video guide for the Mi Mix 2 work for the Mi Mix 2s as well or are many things different? Thank you in advance for a short reply.
Hello,
Is not a good idea to try to just replace de LCD screen. I did this operation many times in the past and I can confirm that's a long operation (~1h30), there's a lot of risks that you break the digitizer and for a good result, you need LCD glue and a UV machine.
So, I think it's a better idea to replace all the screen: LCD + Digitizer.
Any suggested YouTube videos to replace the glass + LCD + digitizer?
Looking at a used phone with broken glass. It's like $10 for glass or $32 for the whole set and if I recall last time I had glass swapped it was like $60 labor and no guarantee the LCD wouldn't break. I'm pretty technical have repaired plenty of phones Android and iPhone. Anyone have a good link for removing the LCD / digitizer / glass unit? Is this like the Samsung where you need to use a blow dryer to heat the adhesive to get it off? Or like an iPhone where you just take screws out and pry the panel out? Much appreciated
Dopped my Ultra yesterday which has a case fitted but it fell on a stone which penetrated the 5x zoom glass (pic attached). A bit gutted as I've only had the phone a few weeks.
Just wondering if you think it can be repaired by a local phone repairer?
As this is a China only phone, do you think that they will be able to get the parts needed for a repair?
Thanks in advance
Surprisingly it can still take images using the 5x lens even though it looks like below. I assume there is some loss of clarity as I took this images right after the accident
Smashed my camera too!
As it's the transparent glass back, there is only one facility that can repair it. Luckily I'm in China so I can send it back to Xiaomi. If you are outside China you might be SOL.
That glass broke way to easily!
You can find the camera module here. But not sure about the back glass. You can mail them and ask. Maybe they can help.
https://www.vopmart.com/xiaomi-mi-10-ultra-replacement-parts.html
I found a site called, "cellspare". They have the whole rear glass. However, they're $100. As far as repair goes, the Mi 10 Ultra is no different than a Samsung to replace the rear glass.
Heat it up, make a small gap, and separate the adhesive. Any competent tech should be able to do it. It might even be something you could do on your own.
Hello,
Unfortunately my front glass broke. Touch display and everything still works.
That's why I didn't want to replace the entire digitizer, just the glass.
Has anyone of you ever done this? It would be important to know whether the entire display is covered with adhesive or only part of it.
The glass that you can only get in China comes with 2 strips. I had already dismantled a number of smartphones, but if the entire Gals is glued over the entire surface, I am missing the equipment
Thanks in advance