Related
Hi Friends,
Was Roaming around all over Tamil nadu and with my Nikon taking precedence over mobile, was away from laptop for few weeks. Now am Back with a kernel. With JB development going in photon speed, it may luk odd with a development work in ICS. But for those who are still persisting in ICS, it may matter. It is still a beta version. It has only the features that are listed below. Planning to add more features soon.Test and let me know on Battery drain, Performance and Deep sleep.
Features:
Based on Samsung ICS Update 2 Source
eMMC brick bug disabled
Pre-rooted
Overclocked - Currently added 1.2 Ghz alone
RAM Hack - Thanks to Adi_Pat
Governors - Conservative, Interactive and Performance
Schedulers - Noop, Deadline and CFQ
BLN Support with liblights - Thanks to Adam77Root
Custom Boot Animation Supported
Few Ramdisk tweaks
Auto-brightness fix - Thanks to Ardatdat
Voodoo sound patch
Download - Dropbox
Features working on:
Intermediate frequencies for OC
Custom Voltage
Memory Management and Misc tweaks
Kernel Source - Github
reserved
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Just flashed the kernel. For some reason unable to use WiFi. Not being detected. Initial reactions: pretty smooth. I'm on bb rom. Will test for a while and update.
Sent from my GT-I9103 using xda app-developers app
drarunmmc said:
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Click to expand...
Click to collapse
it can be used on any ice based rom:screwy:
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
---------- Post added at 07:40 AM ---------- Previous post was at 07:33 AM ----------
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Thank you selva for the effort buddy:beer: so
used the kernel for a while.
Pros
1. Deep sleep perfect
2. Zero game lag. Tried with Subway surfers
3. Silky smooth
Cons
1. WiFi not working/connecting even after wiping cache/dalvik.
As I don't have much 2g data left for this month reverting back to ardatdat beta 6.
Sent from my GT-I9103 using xda app-developers app
@amar I set the set cpu to 1ghz only and rebooted buddy. It did not go to 1.2
Sent from my GT-I9103 using xda app-developers app
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
amar1548 said:
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
Click to expand...
Click to collapse
amar1548 said:
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
Click to expand...
Click to collapse
Battery Life, yes it may be terrible as its only beta version. Its not because of OC. Its because i have not included all the tweaks needed for battery life. Still its in testing stage. Reason for including OC and having only 1.2 ghz is to test whether its preventing the game lag. Generally when i OC with limits and intermediate ranges as 1.1, 1.2 and 1.3, mostly the mobile clock in 1.1 ghz and very rarely going to 1.2 ghz. So i skipped 1.1 and included only 1.2 ghz.. Just a testing.
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Adam77Root said:
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Have not thought about it. Will check on it once im done with other basic stuffs. Surely will get in touch with u when including the scheduler.
MaZel Kernel v1.0 Beta-2
MaZel Kernel Beta-2 has been uploaded in dropbox.
Features added:
Auto Brightness fix
Voodoo Sound patch
Few tweaks
Please test and let me know guys.
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
dragosh01x said:
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
Click to expand...
Click to collapse
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
selva.simple said:
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
Click to expand...
Click to collapse
Let's try again : http://forum.xda-developers.com/showthread.php?t=1950052 - it's a "fixed" kernel by codeworkx for the Galaxy Tab 2 10.1, my other device, which also had serious lags and freezes in ICS as our Galaxy R. Hope there is magic you can add from that to your kernel.
Ok now..included intermediate freq of 1100 and then the BFQ scheduler as suggested by Adam. Getting few compiler errors for BFQ. Will check it tomorrow.
And finally setup the environment for AOSP build. As Ubuntu 12.04 was not supporting all the branches to do AOSP build (though its gud for kernels), now setup a diff environment using 10.04. Will Start init/sync tomorrow.
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Adam77Root said:
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Click to expand...
Click to collapse
Thanks a lot buddy. I surely need tat because of my poor data bandwidth.
Testers needed for CM10 kernel
Friends,
Need some testers for a new CM10 kernel. I have not even tried it as im doing some testing with ICS kernel in my device. So those who are about to test, have a back-up and then test this kernel. No special features added yet. Just wanna check whether its boots-up in cm10.
Link - MaZel CM10 Kernel
Sooo...did you find anything useful in that blamesamsung kernel : http://forum.xda-developers.com/showthread.php?t=1950052 ?
AndiP Boeffla kernel v2.11 stable compiled for GT-I9305.
!! This kernel is intended for Samsung based ROMS 4.1.x (Until Samsung release 4.2.x source) !!
The kernel is recompiled with the required changes so it will work on our I9305.
Changes i made between the I9300 kernel.
No FM-radio
Removed CMA device memory allocation (We dont need that with 2gb ram)
Removed Load and flash kernel script from Boeffla site (The site doesn't have I9305 kernels atm)
Patched Boeffla_Sound driver to work with I9305 soc (Thank's to Andrei for his swithes to his code)
Compiled with stock ARM 4.7 toolchain
Based on latest Samsung Update 10 source code
Everything else is like the I9300 kernel.
.:The compile-port and tests made by me and only me:.
Please for any questions problems or anything else ask here and not on I9300 thread.
All credits for that kernel goes to AndiP for the work and updated sources also for allow me to release that port.
And also AndreiLux for help me understund a lot of thinks about compiling.
Important note copied pasted for AndiP's I9300 thread:
Is recommend strongly to reset all kernel configuration to default settings before flashing the new kernel (Tap "APP: Reset all settings" in Boeffla-Tweaks app) and configure your settings again after the flash. This procedure is required this time to avoid side effects.
Boeffla site:
http://www.boeffla-kernel.de
GT-I9300 Thread:
http://forum.xda-developers.com/showthread.php?t=1964572
Boeffla sound app:
https://play.google.com/store/apps/details?id=com.near.boefflasound
Source code
Thank's
Thank you
Thanks once again
I'll test this a test drive
Very nice kernel, very flexible and I LOVE the sound mods.
Just a quick question, I noticed that there are Boeffla sound settings in the Boeffla Tweaks app.
Do we stll we both the Tweaks and Sound app?
Can I ask a small favour and get somebody to post some good CPU / GPU settings to get me started with some good tweaking / overclocking?
This is one thing I dont really know a hell of a lot about lol
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
So this is the beta version of 2.10 not the stable version?
Sent from my GT-I9305 using XDA Premium HD app
Απ: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
Obagleyfreer said:
So this is the beta version of 2.10 not the stable version?
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
It is a test version.
Did anyone found any problem??
Try to read the boeffla site to see the diff..
I found it stable. If not i can also compile and upload the 2.9 version.
Thank's
ausdim said:
It is a test version.
Did anyone found any problem??
Try to read the boeffla site to see the diff..
I found it stable. If not i can also compile and upload the 2.9 version.
Thank's
Click to expand...
Click to collapse
It worked for me, the Boeffla Sound tweaks are amazing !!
Still don't know enough about setting up a decent overclocking on the CPU and GPU tweaks.
If someone can give me the setting for a basic overclocking on CPU / GPU I can give it a good test with benchmarks, games, apps etc.
The latest release would be nice though however, and include the Boeffla Sound App if its required please
TIA...
EDIT: Found this page: HERE
Seems to be very explanatory...
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
It runs great, for now. Thanks!
Sent from my GT-I9305 using Tapatalk 2
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
Loving this kernel
Sent from my GT-I9305 using xda premium
Thanks ausdim, you rock
ausdim said:
It is a test version.
Did anyone found any problem??
Try to read the boeffla site to see the diff..
I found it stable. If not i can also compile and upload the 2.9 version.
Thank's
Click to expand...
Click to collapse
Hi
i got problem with galery
galery full ,not enough space deleted unnecessary items
i use ripper rom ,before use yank kernel do not have this galery problem
i have use extsdcard2 internal
my memory card still have more free space
br
awesome kernel...
Love it,
Any way of dual booting on this? so I can run paranoid android and my current ripper rom? if not no worries... just curious.
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
Hey guys can I apply this kernel to my i9305 via cwm & after install do I have to do anything else? I'm running CM 10.1 nightly.
Thanks in advance.
Sent from my GT-I9305 using xda premium
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
occtec said:
Hey guys can I apply this kernel to my i9305 via cwm & after install do I have to do anything else? I'm running CM 10.1 nightly.
Thanks in advance.
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
NO! This kernel is for 4.1 stock based ROMs. IIRC CM 10.1 is based on 4.2 android.
Sent from my GT-I9305 using Tapatalk 2
This kernel gets the thumbs up from me, FINALLY a good customisable kernel with good sound features.
I'm running this kernel on both my phone and my partner's phone (as she really needed a good fix for USB Charging), and we both couldn't be happier with the performance improvements. Two nice changes noticeable were in games, plus the sound quality when we plug the phone into our car via the headphone socket.
This is the config I used for both phones, any options not mentioned were left as default.
Boeffla Sound
- Advanced Tuning -> Speaker Tuning ON
- Tuning -> HW Equalizer ON
- Tuning -> Graphical Equalizer -> Presets -> Bass+Treble Balance
Boeffla Tweaks
- CPU Max Frequency: 1500mhz
- GPU Frequencies: 266/350/440/533
- Sharpness Fix: ON
- AC Charge Rate: 1200mA
- USB Charge Rate: 900mA
I still don't know a lot about the Boeffla Tweaks, but this seems to be a good starting point. Maybe some other people can share their configurations as well...
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
I have noticed that hotpluging of cpu cores doesn't work nice with this kernel. I had similar but different issue with perseus kernel.
With boeffla three cores are always active. After reboot there are 4 cores and after a couple of minutes or less third core goes off, and it stays like that. Changing governor doesn't help.
Anyone else with this problem?
Sent from my GT-I9305 using Tapatalk 2
Awesome job on the Kernel!
And thank you for all your porting efforts
Any chance you could port the latest stable version of this kernel?
Or maybe a port of the 4.2.1 Android Revolution 30.5 Rom?
Obagleyfreer said:
Any chance you could port the latest stable version of this kernel?
Click to expand...
Click to collapse
Yes i can port also the 2.9 stable but i dont find any reason for that because i see the 2.10 is also stable.
Obagleyfreer said:
Or maybe a port of the 4.2.1 Android Revolution 30.5 Rom?
Click to expand...
Click to collapse
As you know Samsung doesnt release the sources for 4.2.x kernel so i cant work on that part.
Until samsung release the sources then i can port it to I9305.
Thank's
After wipe cache and wipe dalvik cache the microfone dosen't work, only flash an other kerne (perseus) sloved this problem!...i Flash back to this kernel and 1st all works fine, after wipe microfone is broken again
Sonic76
Boeffla Samsung Kernel by AndiP
Ported and compiled by Hbohd and P$T
For i9305
Introduction
Note: The 4.x kernels are only for Samsung based 4.1.x roms!!! Do not install it on CM or AOSP based roms!!!
The 5.x kernels are only for Samsung based 4.3 roms!!! Also do not install it on CM or AOSP based roms!!!
After ausdim's contribution to porting variety of kernels to our phone, I am here to continue his work (he won't maintain it any longer because he simply doesn't own this phone now). Updates will be made as soon as Andi will push them to github.
Here is original thread of i9300 boeffla kernel - CLICK
Here is thread with boeffla ported by ausdim - CLICK
Info
Kernel is compiled using Linaro 4.9.1 with some required changes for our i9305:
No FM radio
No CMA_DMA
No flash and load in Boeffla App
New 'Hbohd preset' and 'PST preset' which are just our everyday use settings.
New 'Hbohd' and 'PST' equalizer preset - just our favorite.
Apart from that, everything is same as in i9300 version.
Please for any questions problems or anything else ask here and not on I9300 thread.
Credits
P$T (for helping hand with compiling and endless patience and time)
Ausdim (basing on his work and he always gives helping hand)
Yank (his endless patience and knowledge to help with any issue)
AndiP (for kernel base and another kind help)
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash a new kernel.
Source:
Here it is, github link! - CLICK
5.2 STABLE compiled with linaro 4.8.3 toolchain -->HERE
Newest version 5.3-beta7 compiled with linaro 4.9.1 toolchain (new ramdisk NE4) --> HERE
Camera bug info:
It appears that some people (like me) have problem with camera. In exactly THIS situation: do full wipe, flash sammy rom+boeffla kernel, reboot and launch camera. Effect? Camera closes with "camera failed" popup.
Possible solution:
1. Read this thread and follow steps --> click
2. Flash Sammy Rom with stock Sammy kernel, run the camera, take a photo, then reboot to recovery and flash my ported kernel
3. Flash Sammy Rom with stock Sammy kernel, run the camera, take a photo, grab file (SlimISP_XX.bin, where XX differs between phones) from /data/cfw/ and backup it where you want. Then if you can always copy it to /data/cfw if your camera doesn't work with my ported kernel. (ATTENTION: Unfortunately this file does not always appear - still don't know why )
Possible explanation, my own research:
I found out that people with ZD and GD will have camera working always. Why? Because these (SlimISP_XX.bin, where XX differs between phones) files are packed within kernel (zImage exactly) and ONLY THESE two are provided by Samsung in their opensource release... Interesting, isn't it? For example, I have GH version, which I may add to zImage manually, however adding more of them breaks the size limit for boot partition, so it's impossible to have all these versions together. However, stock kernel somehow has them, don't know how because zImages aren't extractable.
And just to confirm my theory, I've compiled a kernel with mine version of camera firmware, made full wipe, installed sammy rom+my kernel, rebooted, launched camera and voila - it worked
Thus, we has to live with this bug unless Samsung do something about it or someone else proves me that I'm wrong
Hbohd said:
I compiled it after adding my own script for zzmoove 0.5 settings, so you all have them in boeffla app. Therefore I need to explain what i changed (it is just for testing purposes, I don't know yet if it is better/worse etc).
I enabled early demand (new feature from 0.5 version):
And also enabled lcdfreq scaling with standard values:
Click to expand...
Click to collapse
Installed let see how it goes...
Good work
Tank's
Sent from my GT-I9305 using Tapatalk 2
Hbohd said:
I compiled it after adding my own script for zzmoove 0.5 settings, so you all have them in boeffla app. Therefore I need to explain what i changed (it is just for testing purposes, I don't know yet if it is better/worse etc).
I enabled early demand (new feature from 0.5 version):
And also enabled lcdfreq scaling with standard values:
Click to expand...
Click to collapse
Thanks.
Do you have any link or something where we can read about zzmoove governor tunables? I was searching, and searching and nowhere have I found a good explanation of all parameters.
I should probably look into sources you just gave a link for, but I am too tired atm.
Edit:
Oh that wasn't link to sources, but it doesn't matter, there has to be one somewhere in Boeffla thread.
Sent from my GT-I9305 using Tapatalk 2
My 'sources' are only one file - defconfig. The rest is completely same as Andi's sources
And for any explanation of zzmoove configurables - there is some documentation, quite well explained: https://github.com/andip71/boeffla-...48257af1b13/drivers/cpufreq/cpufreq_zzmoove.c
Cheers
Thanks for the port.
Over night I find this one better on battery than the last port. See how it goes with a bit of heavy usage today.
Sent from my GT-I9305 using Tapatalk 2
Hi Hbohd. So, let me see if I get it: this port will no longer be updated, and you are now the good guy that will continue to update Boeffla kernel to our beloved I9305?
kazoum said:
Hi Hbohd. So, let me see if I get it: this port will no longer be updated, and you are now the good guy that will continue to update Boeffla kernel to our beloved I9305?
Click to expand...
Click to collapse
Yes, you are completely right Ausdim has even mentioned in his thread that he no longer owns our device (i9305) so I decided to ask for his permission to continue his job here !
I am quite in love with usage results of Boeffla kernel, therefore you do not have to worry about frequent updates
Hbohd it will continue the port of the boeffla kernel since i moved to the i9505.
Also i see Andip make some changes to the boeffla sound driver so it will work better.
Thank's
After 1 day with new kernel I can say the battery improve are the best an till now. Great job
Sent from my GT-I9305 using Tapatalk 4 Beta
Nice.. good job man..
Sent from my GT-I9305
Hbohd said:
Yes, you are completely right Ausdim has even mentioned in his thread that he no longer owns our device (i9305) so I decided to ask for his permission to continue his job here !
I am quite in love with usage results of Boeffla kernel, therefore you do not have to worry about frequent updates
Click to expand...
Click to collapse
Well, I'm sad that a developer leaves this phone, but it is awesome to know that Boeffla will continue to be ported to I9305! The best part is the frequent updates Thumbs up!
I'm gonna try your port and will say something later.
beta6
I found 2.12beta6 very smooth on my wife's s3 (i9300) - is it possible to have beta6 for our device? (i9305)
dyy said:
I found 2.12beta6 very smooth on my wife's s3 (i9300) - is it possible to have beta6 for our device? (i9305)
Click to expand...
Click to collapse
What if I told you...
Beta7 is better than beta6
Thanks for your work.
Do you have any information about problems with distorted sound? It happens randomly here, and someone else reported the same here in this thread.
Have you used Perseus kernel? What do you think about 'Master sequence', that is calibrated colors? I am missing that feature (well, that colors.) a little, so I'm just asking if there is any chance we get it too, or you plan to stay strictly with pure Boeffla source?
Sent from my GT-I9305 using Tapatalk 2
kazoum said:
What if I told you...
Beta7 is better than beta6
Click to expand...
Click to collapse
Beta7 is with zmoove 0.5 which is unstable at the moment - beta6 with 0.3
Besides beta6 is so great on my wife's phone that I'm afraid of changing anything
Sent from my GT-I9305 using Tapatalk 2
!crazy said:
Thanks for your work.
Do you have any information about problems with distorted sound? It happens randomly here, and someone else reported the same here in this thread.
Have you used Perseus kernel? What do you think about 'Master sequence', that is calibrated colors? I am missing that feature (well, that colors.) a little, so I'm just asking if there is any chance we get it too, or you plan to stay strictly with pure Boeffla source?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Sincerely, I haven't experienced any random distortions of sound, everything works great. Obviously, if you raise headphone or speaker volume too high, it may be distorted, but it is understandable.
Or did you want to mention the problem with distorted/freezing/stuttering audio on screen-off? That was discussed and it might be caused due to too low screen-off frequency or too high sampling_rate and sampling_rate_sleep_multiplier. If it's the problem, try to change to zzmoove-optimised as it has this values changed a little bit.
About Perseus' screen calibration settings... As for now, introducing such thing would require adding multiple scripts to support variety of configurations for it (in boeffla app), change app to stweaks (which is quite tough task) or wait for new app which will come in some time, made by Andi (and in my opinion, will let us easily configure what we want).
What's more, personally I liked these calibrated colours, however, original colours also seem good to me So nowadays, I do not need it, although I might look at it in my free time and see what can I achieve
dyy said:
Beta7 is with zmoove 0.5 which is unstable at the moment - beta6 with 0.3
Besides beta6 is so great on my wife's phone that I'm afraid of changing anything
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
The fact is, that ausdim released beta4 or 5, I don't remember exactly, and then was my release beta7. And we somehow skipped beta6, you are right! However if I were you, I wouldn't take zzmoove 0.5 as 'unstable'. It introduces a great deal of new configurables that, I suppose will be really beneficiant in the future (when we all will learn what they mean ).
Version 0.5 is ONLY unstable when you are changing governors frequently. Otherwise, it is really efficient and bettery-friendly one (same as 0.3). In addition, it's my beloved governor since its start
Furthermore, new betas always consist of other updates (like Linux kernel upstream to 3.0.82, fixes, optimizations) so it is always worth to use the newest one!
As for now, you may stay with your actual beta version or wait for next update. Andi is testing comparison between zzmoove 0.3 and 0.5 right now, so he haven't pushed any sources, therefore I can't release any new update We are all impatiently waiting for the results i think!
Anybody experienced a problem when the phone CPU is stuck in the max CPU frequency when the phone is plugged in to the PC using USB connection?
I'm using zzmoove battery profile..
Sent from my GT-I9305 using xda app-developers app
inzomnia said:
Anybody experienced a problem when the phone CPU is stuck in the max CPU frequency when the phone is plugged in to the PC using USB connection?
I'm using zzmoove battery profile..
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Have the same problem, no matter the governor i choose.
I try zzmove battery and pegasusq boeffla battery saving
!crazy said:
Thanks for your work.
Do you have any information about problems with distorted sound? It happens randomly here, and someone else reported the same here in this thread.
Have you used Perseus kernel? What do you think about 'Master sequence', that is calibrated colors? I am missing that feature (well, that colors.) a little, so I'm just asking if there is any chance we get it too, or you plan to stay strictly with pure Boeffla source?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
I had this issue with boeffla but only when i used rxtreme rom, i never have it with ripper rom!
Hey Zup guys, i just updated my GREAT KERNEL FROM FRANCO I LOVE IT... Thanks for the Great Work, Only question.. . after r20 cant Over Clock and dont know if is somethng i got on my rom or i have to do something else.. im using Cataclysm and that combination ive been using for the las few weeks CANT COMPLAIN THAT ROM AND FRANCOS KERNEL IS LIKE BATMAN AND ROBIN... great team work..
Anybody else having the same issue.?? Thanks... in advanced
dominationk1 said:
Hey Zup guys, i just updated my GREAT KERNEL FROM FRANCO I LOVE IT... Thanks for the Great Work, Only question.. . after r20 cant Over Clock and dont know if is somethng i got on my rom or i have to do something else.. im using Cataclysm and that combination ive been using for the las few weeks CANT COMPLAIN THAT ROM AND FRANCOS KERNEL IS LIKE BATMAN AND ROBIN... great team work..
Anybody else having the same issue.?? Thanks... in advanced
Click to expand...
Click to collapse
If you can't overclock, then it means that franco didn't include that option in >r20.
Anyways, why would you want to overclock a 2.2 GHz quad core?
Thanks for the response
abaaaabbbb63 said:
If you can't overclock, then it means that franco didn't include that option in >r20.
Anyways, why would you want to overclock a 2.2 GHz quad core?
Click to expand...
Click to collapse
i just need it in some specifics moments not all the time but i just updated and this is the first thing i try when updated, franco mentiond on the changelog the update on the cpu.
sooooo my mum bought new phone and her old gt-s7500 is lying around not used. i want to play with it and probably compile custom kernel. so anyone wants custom gb kernel?
mdfzhi said:
sooooo my mum bought new phone and her old gt-s7500 is lying around not used. i want to play with it and probably compile custom kernel. so anyone wants custom gb kernel?
Click to expand...
Click to collapse
I think that it would appreciated :good:
anyone wants the gb custom kernel can pm me.
i'm using mb-14 source as base, overclockable upto 1,2ghz, i've backported interactive governor from kernel 3.4, added custom gpu table, added dynamic fsync, added logger control, compiled using gcc 4.4.3 with correct arm cortex-a5 for ace plus. 50mb zram. tested and running fine for two days now, stable and no reboot.
Could you give me a link to mb-14's sources? I can't seem to find traces of any GB kernel anywhere, even in Samsung's site. This could help me in building a new stable 3.4 kernel.
Thanks!
Liam D. said:
Could you give me a link to mb-14's sources? I can't seem to find traces of any GB kernel anywhere, even in Samsung's site. This could help me in building a new stable 3.4 kernel.
Thanks!
Click to expand...
Click to collapse
Are these?
AndroidVin said:
Are these?
Click to expand...
Click to collapse
Specifically, this, but thanks for the direction!
Liam D. said:
Specifically, this, but thanks for the direction!
Click to expand...
Click to collapse
glad to help a great developer like you ......good work, I will wait your next build, hoping that the kernel panic bug will be solved :fingers-crossed: