AndiP Boeffla kernel v2.11 stable compiled for GT-I9305.
!! This kernel is intended for Samsung based ROMS 4.1.x (Until Samsung release 4.2.x source) !!
The kernel is recompiled with the required changes so it will work on our I9305.
Changes i made between the I9300 kernel.
No FM-radio
Removed CMA device memory allocation (We dont need that with 2gb ram)
Removed Load and flash kernel script from Boeffla site (The site doesn't have I9305 kernels atm)
Patched Boeffla_Sound driver to work with I9305 soc (Thank's to Andrei for his swithes to his code)
Compiled with stock ARM 4.7 toolchain
Based on latest Samsung Update 10 source code
Everything else is like the I9300 kernel.
.:The compile-port and tests made by me and only me:.
Please for any questions problems or anything else ask here and not on I9300 thread.
All credits for that kernel goes to AndiP for the work and updated sources also for allow me to release that port.
And also AndreiLux for help me understund a lot of thinks about compiling.
Important note copied pasted for AndiP's I9300 thread:
Is recommend strongly to reset all kernel configuration to default settings before flashing the new kernel (Tap "APP: Reset all settings" in Boeffla-Tweaks app) and configure your settings again after the flash. This procedure is required this time to avoid side effects.
Boeffla site:
http://www.boeffla-kernel.de
GT-I9300 Thread:
http://forum.xda-developers.com/showthread.php?t=1964572
Boeffla sound app:
https://play.google.com/store/apps/details?id=com.near.boefflasound
Source code
Thank's
Thank you
Thanks once again
I'll test this a test drive
Very nice kernel, very flexible and I LOVE the sound mods.
Just a quick question, I noticed that there are Boeffla sound settings in the Boeffla Tweaks app.
Do we stll we both the Tweaks and Sound app?
Can I ask a small favour and get somebody to post some good CPU / GPU settings to get me started with some good tweaking / overclocking?
This is one thing I dont really know a hell of a lot about lol
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
So this is the beta version of 2.10 not the stable version?
Sent from my GT-I9305 using XDA Premium HD app
Απ: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
Obagleyfreer said:
So this is the beta version of 2.10 not the stable version?
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
It is a test version.
Did anyone found any problem??
Try to read the boeffla site to see the diff..
I found it stable. If not i can also compile and upload the 2.9 version.
Thank's
ausdim said:
It is a test version.
Did anyone found any problem??
Try to read the boeffla site to see the diff..
I found it stable. If not i can also compile and upload the 2.9 version.
Thank's
Click to expand...
Click to collapse
It worked for me, the Boeffla Sound tweaks are amazing !!
Still don't know enough about setting up a decent overclocking on the CPU and GPU tweaks.
If someone can give me the setting for a basic overclocking on CPU / GPU I can give it a good test with benchmarks, games, apps etc.
The latest release would be nice though however, and include the Boeffla Sound App if its required please
TIA...
EDIT: Found this page: HERE
Seems to be very explanatory...
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
It runs great, for now. Thanks!
Sent from my GT-I9305 using Tapatalk 2
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
Loving this kernel
Sent from my GT-I9305 using xda premium
Thanks ausdim, you rock
ausdim said:
It is a test version.
Did anyone found any problem??
Try to read the boeffla site to see the diff..
I found it stable. If not i can also compile and upload the 2.9 version.
Thank's
Click to expand...
Click to collapse
Hi
i got problem with galery
galery full ,not enough space deleted unnecessary items
i use ripper rom ,before use yank kernel do not have this galery problem
i have use extsdcard2 internal
my memory card still have more free space
br
awesome kernel...
Love it,
Any way of dual booting on this? so I can run paranoid android and my current ripper rom? if not no worries... just curious.
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
Hey guys can I apply this kernel to my i9305 via cwm & after install do I have to do anything else? I'm running CM 10.1 nightly.
Thanks in advance.
Sent from my GT-I9305 using xda premium
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
occtec said:
Hey guys can I apply this kernel to my i9305 via cwm & after install do I have to do anything else? I'm running CM 10.1 nightly.
Thanks in advance.
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
NO! This kernel is for 4.1 stock based ROMs. IIRC CM 10.1 is based on 4.2 android.
Sent from my GT-I9305 using Tapatalk 2
This kernel gets the thumbs up from me, FINALLY a good customisable kernel with good sound features.
I'm running this kernel on both my phone and my partner's phone (as she really needed a good fix for USB Charging), and we both couldn't be happier with the performance improvements. Two nice changes noticeable were in games, plus the sound quality when we plug the phone into our car via the headphone socket.
This is the config I used for both phones, any options not mentioned were left as default.
Boeffla Sound
- Advanced Tuning -> Speaker Tuning ON
- Tuning -> HW Equalizer ON
- Tuning -> Graphical Equalizer -> Presets -> Bass+Treble Balance
Boeffla Tweaks
- CPU Max Frequency: 1500mhz
- GPU Frequencies: 266/350/440/533
- Sharpness Fix: ON
- AC Charge Rate: 1200mA
- USB Charge Rate: 900mA
I still don't know a lot about the Boeffla Tweaks, but this seems to be a good starting point. Maybe some other people can share their configurations as well...
Re: [Kernel][GT-I9305][Update 9]--Boeffla-Kernel 2.10b2 ported!
I have noticed that hotpluging of cpu cores doesn't work nice with this kernel. I had similar but different issue with perseus kernel.
With boeffla three cores are always active. After reboot there are 4 cores and after a couple of minutes or less third core goes off, and it stays like that. Changing governor doesn't help.
Anyone else with this problem?
Sent from my GT-I9305 using Tapatalk 2
Awesome job on the Kernel!
And thank you for all your porting efforts
Any chance you could port the latest stable version of this kernel?
Or maybe a port of the 4.2.1 Android Revolution 30.5 Rom?
Obagleyfreer said:
Any chance you could port the latest stable version of this kernel?
Click to expand...
Click to collapse
Yes i can port also the 2.9 stable but i dont find any reason for that because i see the 2.10 is also stable.
Obagleyfreer said:
Or maybe a port of the 4.2.1 Android Revolution 30.5 Rom?
Click to expand...
Click to collapse
As you know Samsung doesnt release the sources for 4.2.x kernel so i cant work on that part.
Until samsung release the sources then i can port it to I9305.
Thank's
After wipe cache and wipe dalvik cache the microfone dosen't work, only flash an other kerne (perseus) sloved this problem!...i Flash back to this kernel and 1st all works fine, after wipe microfone is broken again
Sonic76
Related
Dear all,
The v1.8.1 kernel is ready!
I have been working hard these days to study on the touch panel source code and the auto-brightness source codes.
Progresses on the touch panel to make it more sensitive & a fix on auto-brightness are the major features of this v1.8.1 kernel. Below lists out the detailed features:
v1.8.1 (based on newest ZSLE6 kernel source)
==================================
- Support for all ROMs (including ZSKK5, ZSLE6, etc...)
- This kernel is not overclocked. In other words, stock frequencies are used
- Touch panel fully support 10 points multi-touch with better sensitivity
- Touch panel gets better performance under moisture & water drops
- Auto-brightness finally fine tune to an appropriate brightness level. Try it out!
- Doesn't support 2-way voice recording & off-machine alarm
- All features of v1.7 are kept, including Voodoo sound enhancements
Please kindly download the kernel below and flash through CWM recovery:
File: ardatdat_9103_kernel_v1.8.1_1G.zip
Link: http://www.mediafire.com/download.php?lbplsm7shse6f3c
Mirror: http://115.com/file/e7ym8ypx#ardatdat-9103-kernel-v1.8.1-1G.zip
MD5: 5E5F1EE84F295748CC167E3BFD6A52A4
Next step: OC version will be released after 1-2 weeks
v1.7 could be found there:
http://forum.xda-developers.com/showthread.php?t=1633345
Finally, flash at your own risk! Please feed back how you feel and don't hesitate to give me a 'thank' & donations if the kernel works great for you
(Please refer attached images for the explanations on the auto-brightness fine tune logic. According to the chart, this kernel will not go extremely dark nor extremely bright. Thus making a comfortable brightness adjustment. Please try it out!)
Is sound output is same as unknownzd kernel?
Sent from my GT-I9103 using Tapatalk 2
reserved...
xlm13x said:
Is sound output is same as unknownzd kernel?
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Sound quality is the same as my v1.7 kernel
Can u improve it as unknownzd kernel, ur kernel is smooth and have more features that him but sound effect have huge differences
Sent from my GT-I9103 using Tapatalk 2
xlm13x said:
Can u improve it as unknownzd kernel, ur kernel is smooth and have more features that him but sound effect have huge differences
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried my v1.7 kernel? It already included the Voodoo sound improvement that makes a huge difference when comparing with my older kernel versions.
Of course, the newest v1.8.1 kernel has also included Voodoo sound as well! Try it out!
Testing will report back soon.
Sent from my GT-I9103 using Tapatalk 2
Bass output is lilbit weak than unknownzd kernel. If possible look after it and try to improve it from unknownzds sources.
Don't wanna say anything just see the attached pic
Sent from my GT-I9103 using Tapatalk 2
Installed... Brightness is superb...
Sent from my GT-I9103 using xda app-developers app
xlm13x said:
Bass output is lilbit weak than unknownzd kernel. If possible look after it and try to improve it from unknownzds sources.
Don't wanna say anything just see the attached pic
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
wowo! great! you should include your fingers in the screen capture
Actually, I am already using the Voodoo sound enhancements from unknownzd kernel in my v1.7 kernel!!! You should download the Voodoo sound apk to control the base level, and etc. Thanks!
karthik050782 said:
Installed... Brightness is superb...
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Yes, I can say that the auto-brightness level is far more comfortable & reasonable than the stock one
I flashed the v1.8.1 kernel over ZSLE5 with Neo Rom v2.1 but I cant find any difference.. First of all it took a lot of time to boot.. Secondly, my overclock freq doesnt exceed 1ghz. Prev it was 1.3ghz... Third I cant find any new app or any thing.. is that ok??
kunaal2580 said:
I flashed the v1.8.1 kernel over ZSLE5 with Neo Rom v2.1 but I cant find any difference.. First of all it took a lot of time to boot.. Secondly, my overclock freq doesnt exceed 1ghz. Prev it was 1.3ghz... Third I cant find any new app or any thing.. is that ok??
Click to expand...
Click to collapse
Have you seen my #1 post first? Before flashing the kernel?
As I said, this time, I do not do any overclock, so the frequency is stock.
Second, it takes time to boot is the normal behavior that also happens on v1.7 because I have also cleared the cache & dv-cache during flashing.
Please read thoroughly at post #1 before flashing any things. Thanks.
Waiting for OC version ; any chance of GPU/RAM OC as in Cranium kernel ? I've also noticed that Nexus scores higher than GSII and GR mostly because of RAM speed.
I'm trying this new kernel, I installed it two hours ago, everything's fine for the moment.
I'm afraid of the problems I had with 1.7b2, the sleep of the death. At night, while it was recharging, it used to enter to a state where it wasn't possible to wake it up. I hope that's solved
The speed is very good and also the sound, if you use poweramp and increase the preamp level a bit, you'll not miss unkn music.
Auto brightness is much better.
Thanks ardatdat, very nice work!
Sent from my GT-I9103 using xda premium
ardatdat said:
- Doesn't support 2-way voice recording & off-machine alarm
Click to expand...
Click to collapse
Thanks once again for the new kernel buddy.
Any chance to enable Call Recording in future updates ? It's very useful.
Will I flash it over the v1.6? I want to upgrade it to v1.8.1
Please tell me how to do upgrade.
slyzzz said:
Will I flash it over the v1.6? I want to upgrade it to v1.8.1
Please tell me how to do upgrade.
Click to expand...
Click to collapse
AFAIK there's no need to flash v1.7 of the kernel you can directly flash the 1.8.1.
Hope this helps
ardatdat said:
wowo! great! you should include your fingers in the screen capture
Actually, I am already using the Voodoo sound enhancements from unknownzd kernel in my v1.7 kernel!!! You should download the Voodoo sound apk to control the base level, and etc. Thanks!
Click to expand...
Click to collapse
If I had two more fingers to take screenshot I would have surely done it.
I already have voodoo app and I m using settings which is perfect for me. Believe me buddy on same settings unknown kernel provides lil better results than urs. Maybe because of other tweaks u applied to kernel causing this
Sent from my GT-I9103 using Tapatalk 2
dragosh01x said:
Waiting for OC version ; any chance of GPU/RAM OC as in Cranium kernel ? I've also noticed that Nexus scores higher than GSII and GR mostly because of RAM speed.
Click to expand...
Click to collapse
I don't think we need gpu/ram oc we already have very powerfull deviice and by doing oc damaging hardware is not a good idea.
Sent from my GT-I9103 using Tapatalk 2
Dear all,
The v1.8.3 kernel is ready!
Special thanks to Adi_Pat for the ram hack coding!
So, if you are worry that this kernel will brick your machine or not stable, you are suggested not to flash this kernel. And if you have flashed it, you can always go back to previous kernel.
v1.8.2 is a private beta, in order to avoid confusion, I mark up the public release version to v1.8.3.
The major updates are listed below:
v1.8.3 (based on newest ZSLE6 kernel source)
==================================
- Support for all ROMs (including ZSKK5, ZSLE6, etc...)
- Available RAM increases to 853MB (increased by 129MB when comparing with stock)
- This kernel can support OC to 1320Mhz. By default, it is not OC, you need to OC using software like SetCPU
- Touch panel revert back to 5 points multi-touch as it is more stable
- Support EFS auto backup! EFS is auto backup to /data/.ardatdat/
- TCP/IP & SD Card tweaks are applied
- All features of v1.8.1 are kept, including Voodoo sound enhancements, auto-brightness control and etc
Please kindly download the kernel below and flash through CWM recovery:
File: ardatdat-9103-kernel-v1.8.3-1.32G(136-8-8).zip
Link: http://www.mediafire.com/?1iq7x046yxno24x
Mirror: http://115.com/file/e75txw3m#ardatdat-9103-kernel-v1.8.3-1.32G(136-8-8).zip
MD5: 00361D7AD9548ED3CFD0D6E03C22D537
v1.7 could be found there:
http://forum.xda-developers.com/showthread.php?t=1633345
v1.8.1 could be found there:
http://forum.xda-developers.com/showthread.php?t=1736389
Finally, flash at your own risk! Please feed back how you feel and don't hesitate to give me a 'thank' & donations if the kernel works great for you
Best Regards,
ardatdat
reserved...
I hit the first thank
Thanks a lot buddy for all ur efforts. Now as the cm devlopment already started for our device. Y don't u join epsy, adam77 and work for making cm better. u r one of the best devs for sgr and currently our one and only kernel expert ur help is appreciated to make cm better.
| Galaxy R | CM7 Nightlie 18 July | XWLA4 |
This was sent from Tapatalk 2.
Thanks for the new version, but please consider adding HOTPLUG to the next one so that the battery will last even longer.
Thanks alot..
Downloading ASAP..
If you can, please help Epsy,Adam to port CM Dude. You are one of the finest devs here.
dragosh01x said:
Thanks for the new version, but please consider adding HOTPLUG to the next one so that the battery will last even longer.
Click to expand...
Click to collapse
Any source codes for reference? Thanks.
For HOTPLUG, check TITANIUM kernel.
If you're also interested in GPU OC check CRANIUM kernel.
And I was just wondering; there is a guy on Antutu Benchmark that has Android 2.3.7 - 1920 MHz - 4841 (score). How's that possible ?
downloading!! huhuh..
yeah very much appreciate if CM release for this device. and your help would be greater in the development.
Thank man.... Great job...
You are truly awesome.....
The other features that can be from CRANIUM kernel.... Can u kindly add a moderate cpu clock like 1200 or 1150....
downloaded... And, will see.... How greatly it performs like all your other older kernels.....
Sent from my GT-I9103
Wuhuuu flashed right now
Sent from my Big R 6363Antutu
If I flash this, my ram increases. Now if I go back to 1.8.1, I get the same 724 mb ram and rest again gets allocated to graphics, right?
Btw thanks for your work
ICS = I SEE ASS Lol
Sent from my GALAXY R using XDA
Been awesome. Battery life is great for past 8 hrs.
Just one suggestion dude, Please add an intermediate freq between 1000 and 1320. Like 1160/1200 So that we can get best of both Worlds(Improved Battery life + OC)
F3niX said:
Been awesome. Battery life is great for past 8 hrs.
Just one suggestion dude, Please add an intermediate freq between 1000 and 1320. Like 1160/1200 So that we can get best of both Worlds(Improved Battery life + OC)
Click to expand...
Click to collapse
Agreed.......
Sent from my GT-I9103 using xda premium
Switched from CM to Neo ROM just for this....
Big games (like GTA 3 & 9 MM) are working fine, brightness is much better compared to your V 1.7 .....
Thank you Ardatdat for making such a good kernel :good:...
Can any one tell me what r tcp/ip tweaks, that ardat mention in op......???????
Sent from my GT-I9103 using xda premium
hey buddy, can we flash 1.8.3 kernels with XWLA4 2.3.6 version..??
kataria.vikesh said:
hey buddy, can we flash 1.8.3 kernels with XWLA4 2.3.6 version..??
Click to expand...
Click to collapse
Yup ardat clearly state that this in op kernel will work with all rom
Sent from my GT-I9103 using xda premium
gitanshu said:
If I flash this, my ram increases. Now if I go back to 1.8.1, I get the same 724 mb ram and rest again gets allocated to graphics, right?
Click to expand...
Click to collapse
ICS = I SEE ASS Lol
Sent from my GALAXY R using XDA
how to download mediafire things on smartphone?
Sent from my GT-I9103 using xda premium
gitanshu said:
If I flash this, my ram increases. Now if I go back to 1.8.1, I get the same 724 mb ram and rest again gets allocated to graphics, right?
Btw thanks for your work
ICS = I SEE ASS Lol
Sent from my GALAXY R using XDA
Click to expand...
Click to collapse
Yes RAM gets allocated according to the kernel version you flash. So if 1.8.1 did not have RAM hack GPU would get the default allocation and you'll get 724MB free RAM.
After flashing 1.8.1 check the Task Man what you see there is what you get.
Hope this helps.
Birki96 said:
how to download mediafire things on smartphone?
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Set the user agent of your mobile's browser as 'Desktop' then you can download data from mediafire.
Here's how to do it:
Change stock browser's user agent:
Type 'about:useragent' in the stock browser to select 'Desktop' from a list of user agents available.
You can find the other tricks here: http://forum.xda-developers.com/showthread.php?t=1583928
Hope this helps.
Hi Friends,
Was Roaming around all over Tamil nadu and with my Nikon taking precedence over mobile, was away from laptop for few weeks. Now am Back with a kernel. With JB development going in photon speed, it may luk odd with a development work in ICS. But for those who are still persisting in ICS, it may matter. It is still a beta version. It has only the features that are listed below. Planning to add more features soon.Test and let me know on Battery drain, Performance and Deep sleep.
Features:
Based on Samsung ICS Update 2 Source
eMMC brick bug disabled
Pre-rooted
Overclocked - Currently added 1.2 Ghz alone
RAM Hack - Thanks to Adi_Pat
Governors - Conservative, Interactive and Performance
Schedulers - Noop, Deadline and CFQ
BLN Support with liblights - Thanks to Adam77Root
Custom Boot Animation Supported
Few Ramdisk tweaks
Auto-brightness fix - Thanks to Ardatdat
Voodoo sound patch
Download - Dropbox
Features working on:
Intermediate frequencies for OC
Custom Voltage
Memory Management and Misc tweaks
Kernel Source - Github
reserved
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Just flashed the kernel. For some reason unable to use WiFi. Not being detected. Initial reactions: pretty smooth. I'm on bb rom. Will test for a while and update.
Sent from my GT-I9103 using xda app-developers app
drarunmmc said:
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Click to expand...
Click to collapse
it can be used on any ice based rom:screwy:
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
---------- Post added at 07:40 AM ---------- Previous post was at 07:33 AM ----------
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Thank you selva for the effort buddy:beer: so
used the kernel for a while.
Pros
1. Deep sleep perfect
2. Zero game lag. Tried with Subway surfers
3. Silky smooth
Cons
1. WiFi not working/connecting even after wiping cache/dalvik.
As I don't have much 2g data left for this month reverting back to ardatdat beta 6.
Sent from my GT-I9103 using xda app-developers app
@amar I set the set cpu to 1ghz only and rebooted buddy. It did not go to 1.2
Sent from my GT-I9103 using xda app-developers app
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
amar1548 said:
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
Click to expand...
Click to collapse
amar1548 said:
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
Click to expand...
Click to collapse
Battery Life, yes it may be terrible as its only beta version. Its not because of OC. Its because i have not included all the tweaks needed for battery life. Still its in testing stage. Reason for including OC and having only 1.2 ghz is to test whether its preventing the game lag. Generally when i OC with limits and intermediate ranges as 1.1, 1.2 and 1.3, mostly the mobile clock in 1.1 ghz and very rarely going to 1.2 ghz. So i skipped 1.1 and included only 1.2 ghz.. Just a testing.
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Adam77Root said:
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Have not thought about it. Will check on it once im done with other basic stuffs. Surely will get in touch with u when including the scheduler.
MaZel Kernel v1.0 Beta-2
MaZel Kernel Beta-2 has been uploaded in dropbox.
Features added:
Auto Brightness fix
Voodoo Sound patch
Few tweaks
Please test and let me know guys.
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
dragosh01x said:
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
Click to expand...
Click to collapse
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
selva.simple said:
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
Click to expand...
Click to collapse
Let's try again : http://forum.xda-developers.com/showthread.php?t=1950052 - it's a "fixed" kernel by codeworkx for the Galaxy Tab 2 10.1, my other device, which also had serious lags and freezes in ICS as our Galaxy R. Hope there is magic you can add from that to your kernel.
Ok now..included intermediate freq of 1100 and then the BFQ scheduler as suggested by Adam. Getting few compiler errors for BFQ. Will check it tomorrow.
And finally setup the environment for AOSP build. As Ubuntu 12.04 was not supporting all the branches to do AOSP build (though its gud for kernels), now setup a diff environment using 10.04. Will Start init/sync tomorrow.
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Adam77Root said:
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Click to expand...
Click to collapse
Thanks a lot buddy. I surely need tat because of my poor data bandwidth.
Testers needed for CM10 kernel
Friends,
Need some testers for a new CM10 kernel. I have not even tried it as im doing some testing with ICS kernel in my device. So those who are about to test, have a back-up and then test this kernel. No special features added yet. Just wanna check whether its boots-up in cm10.
Link - MaZel CM10 Kernel
Sooo...did you find anything useful in that blamesamsung kernel : http://forum.xda-developers.com/showthread.php?t=1950052 ?
******************Sources up at https://github.com/AKToronto/Canuck ********************************
****currently working off the testing branch I created****************
Hi folks,
Im posting this kernel because there might be a number of people who want to use a custom CM10 base ROM and just want to get some better battery life. Basically its for someone who would be interested in a kernel synced with the latest CM10 sources for 4.1.2 JB and who doesn't want to go to CM10.1 ROMS yet until they become more stable.
Huge thanks goes out to Zarboz as well as ShowP1984
ShowP1984 and Zarboz are real kernel masters. I am still just a simple padawan learner, lol.
Most of the custom source code for this kernel is either cherry-picked, merged or inspired by their work.
For more information on custom kernel settings, governors, schedulers, modules, etc, please check out:
http://forum.xda-developers.com/showthread.php?t=1369817
Please let me know if anything doesn't work! ie reboots or other programs not working. Give the kernel some time to settle too before reporting.
And dont blame me if your device gets borked, lol. "Insert standard disclaimer here"
v1.0 Canuck Kernel
-CM10 JB Kernel sources synced 3.0.61 linux
-Governors included (and code cleaned up a bit) - brazilianwax, intellidemand, SavagedZen, interactiveX, smartass, smartassV2, lagfree, interactive, conservative, userspace, powersave, Lionheart, ondemand, performance (originally from klin's source)
-mpdecision using ShowP's code from Zarboz's AOZP source added
-Force MHL @720p60hz (also from Zarboz's AOZP)
-regular 4.6 eabi toolchains for now
v1.1
Synced with latest 3.0.62 linux
**GPS appears to be fixed and locking properly
v1.2
-Added Undervolting and Overclocking to 1.89gz (1.89 seems the most stable for folks) (taken from Zarboz Beastmode Bricked sources)
v1.3
-various fixes to undervolting, gpu overclock and to default on demand governor (also removed 2 phase on it for now).
v1.4
-removed some more problematic governors (that I also noticed were not compiled in Beastmode)
-enabled two phase ondemand
-added badass governor and cleaned up some of the badass code so that default phase frequency settings stick
v1.5
-thermald added to userspace (allows user to configure settings for when the device gets hot! ie lower cpu clock speed, etc)
-added lower default values to badass governor
**an experimental 2.1 ghz overclock version is also compiled, but that is experimental***
v1.6
-Wheatley governor added (likely the last governor I will add)
-enabled xz compression
-Fixed GPU OC so that settings stick (i recommend 266 for 2d and 320 or 400 for 3d)
-both 1.89 and 2.1 ghz versions added 2.1 ghz seems stable, just make sure you are undervolting correctly (dont undervolt a lot at the higher frequencies)
v2.0 ***Huge update thanks to Zarboz
-Rebuilt with Linaro 4.7 toolchains with -O3 compression flags
-Updated ThermalD and mpdecision source code (hot off the press stuff here!)
-Latest sweep 2 wake added
-various other fixes
v2.1
-Real -O3 compression this time ( on v2.0 it was really only -O compression)
-updated to latest CM10 sources and 3.0.63 linux
v2.2
-Added force mhl to ville defconfig for compile (feel free to test)
-Synced with 3.0.66 linux sources
v2.3
-Faux tweaked intellidemand
-Dynamic fsync enabled (by faux)
-Fastcharge enabled
v2.4
-Removed faux tweaked intellidemand (I didnt like the faux tweaks personally. Im just not sure that governors that try tie in to GPU clocks have
the right default settings to work well on the One S, regular intellidemand could be combined with other the other governors and not introduce instability. I had issues with tweaked plus smartass v2 for example)
-rebuilt using rmbq's cortex-a15 optimized toolchain (this seemed pretty cool, and I thought I would try it out. Seems like the device boots faster now too)
To use sweep to wake, when your screen is off, put your finger on the back button, then sweep all the way to the right in one motion. It works best when you do it fast. To turn the screen off, sweep in the opposite direction.
Compatible ROMs currently include (all CM10 base, not CM10.1):
-Latest CM10 nightlies http://goo.im/devs/cm/ville/nightly
-Latest PAC Man ROM
-Latest AOKP http://forum.xda-developers.com/showthread.php?t=2141549
-Latest Dark Jelly (I think)
-Any other CM10 AOSP ROM that is synced with the latest jellybean branch (not the old jellybean-stable branch) of https://github.com/CyanogenMod/android_kernel_htc_msm8960
Install instructions:
1. Navigate to your /system/bin folder and rename the file mpdecision to something else like mpdec_backup (IMPORTANT)
2. Navigate to your /system/bin folder and rename the file thermald to something else like therm_backup (IMPORTANT)
2. Fastboot flash the boot image from your bootloader
*step one and two is needed because the kernel uses its own mpdecision and thermald controls and the ones included in your ROM are not needed and can only cause problems.
DOWNLOAD LOCATION:
http://www.androidfilehost.com/?a=show&w=files&flid=3192
****BE CAREFUL WITH UNDERVOLTING... Just want to give a fair warning... Undervolting too much, especially below 900, etc on the low end is not recomended. Read up on undervolting before doing too much more. In fact, if you are experienceing issues, try increasing the voltages.
Also recommend using kernel tuner to tweak (found in the app store), following Zarboz's suggestion. It's a good program and let's you set governors for individual cpus, tweak governors, mpdecision, gpu overclock and thermald, and settings tend to stick well.
hello there i was just going to tell you i fastbooted the kernel and it does not go past the splash screen.
Nerd019 said:
hello there i was just going to tell you i fastbooted the kernel and it does not go past the splash screen.
Click to expand...
Click to collapse
Interesting. What ROM are you on? Seems to work just fine with latest PAC Man ROM on my HTC One S. Again, not much was edited at all from the CM10 Jelly Bean source. If stock AOSP JB doesnt boot for you, then neither would this. But it should work just fine on ROMs like JellyBam and PACMan, etc, etc... If it still doesnt work I will double check my upload and the boot.img.
Also, not sure if legacy files from other kernels are causing issues for folks switching over... Using http://forum.xda-developers.com/showthread.php?t=2121584 might help too....
Re: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
I'm on Baked Blackbean 7.1 im actually building the rom as we speak
Sent from my HTC One S using xda app-developers app
Nerd019 said:
I'm on Baked Blackbean 7.1 im actually building the rom as we speak
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Ahhh theres the answer (I think). I think 7 and 7.1 of your awesome baked ROM already use the CM10.1 base.
This kernel was not built off of the CM10.1 base, but just the straight up CM10 Jellybean. It should work with 4.1.2, but no guaruntees on 4.2.1. Does that make sense?
Re: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
yes it does as well i want to thank you for a new kernel
Sent from my HTC One S using xda app-developers app
AW: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
Always nice to see some new things here in the one s forum.
Gesendet von meinem Nexus 7 mit Tapatalk 2
support mhl ?
Re: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
Good to see a new face around man don't hesitate to reach out if you need anything
And who cares who else is building kernels ate fun
Sent from my HTC One XL using xda app-developers app
Re: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
Very pleased to see this new development after Klin announced his fusion kernel obsolete today!
I have recently switched to a sense based ROM to satisfy my need for custom kernels, but can't wait to switch back to CM10 once you get this up and running.
I will be following this thread closely
Sent from my HTC One S using xda app-developers app
Successful boot on Jellybam 4.1.0! Govs and SIO showing up properly, going to start testing them individually.
For a first step, you've done an awesome job! I'm really looking forward to more releases from you. You have some serious potential. I'd be happy to test anything you need tested!
Edit: Still testing, so far so good. No broken governors!
Protip: Change your title up a bit. Replace "first build" with V1.0 and throw in an [AOSP] to draw attention.
awesome job got it to boot with jellybam 4.1.0.
Everything seemed fine but i couldnt get the Wifi to turn on.
Re: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
Hmm interesting with the wifi... Did you have those issues with the stock CM10 kernel too? Wifi seems to work just fine on PACMan Rom for me and worked when I tried Jellybam too... I wonder if the kernel cleaner app would help you, if you had been flashing lots of other kernels on your Rom build?
Sent from my HTC One S using xda premium
With the latest nightly WiFi works fine. 2 days of use with out any problems . Thanks you for your work
Re: [KERNEL][JB 4.1.2][AKToronto][First build, Feb 3, 2013]
AKToronto said:
Hmm interesting with the wifi... Did you have those issues with the stock CM10 kernel too? Wifi seems to work just fine on PACMan Rom for me and worked when I tried Jellybam too... I wonder if the kernel cleaner app would help you, if you had been flashing lots of other kernels on your Rom build?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I actually only tried out the kernel with the jellybam ROM I had installed already.
kernel cleaner? I'm going to check that out when I have time.
and i did do a couple of flashes before trying out your kernel.
I'm going to try it out on a clean install of jellybam and PAC man and I'll let you know what works for me. thanks for the response
No wifi problems here, it's likely caused by legacy kernel files. Try out the solution in Post #3 before you wipe everything. If that doesn't work, post what HBOOT you're device has.
Very nice. Thanks.
Is there a chance of getting s2w?
Kernel updated. Main update was some cleanup of some code around the governors and adding of kernel based mpdecision. This is mainly off of Zarboz's work and of course ShowP and his awesome mpdecision coding.
I know folks will want sweep to wake and a few other settings too im sure. Those things will come in time. Any other governors that people find useful? I have heard badass can be pretty good too...
Re: [KERNEL][JB 4.1.2][AOSP][Canuck][v1.0][3.0.61 linux]
can i use it on baked rom?
Sent from my HTC One S using xda app-developers app
Nerd019 said:
can i use it on baked rom?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
depends on what version of baked. If your already at CM10.1 or v 4.2.1 of Android then no. You should go for one of the other two new kernels floating around for CM10.1 They look promising.
Boeffla Samsung Kernel by AndiP
Ported and compiled by Hbohd and P$T
For i9305
Introduction
Note: The 4.x kernels are only for Samsung based 4.1.x roms!!! Do not install it on CM or AOSP based roms!!!
The 5.x kernels are only for Samsung based 4.3 roms!!! Also do not install it on CM or AOSP based roms!!!
After ausdim's contribution to porting variety of kernels to our phone, I am here to continue his work (he won't maintain it any longer because he simply doesn't own this phone now). Updates will be made as soon as Andi will push them to github.
Here is original thread of i9300 boeffla kernel - CLICK
Here is thread with boeffla ported by ausdim - CLICK
Info
Kernel is compiled using Linaro 4.9.1 with some required changes for our i9305:
No FM radio
No CMA_DMA
No flash and load in Boeffla App
New 'Hbohd preset' and 'PST preset' which are just our everyday use settings.
New 'Hbohd' and 'PST' equalizer preset - just our favorite.
Apart from that, everything is same as in i9300 version.
Please for any questions problems or anything else ask here and not on I9300 thread.
Credits
P$T (for helping hand with compiling and endless patience and time)
Ausdim (basing on his work and he always gives helping hand)
Yank (his endless patience and knowledge to help with any issue)
AndiP (for kernel base and another kind help)
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash a new kernel.
Source:
Here it is, github link! - CLICK
5.2 STABLE compiled with linaro 4.8.3 toolchain -->HERE
Newest version 5.3-beta7 compiled with linaro 4.9.1 toolchain (new ramdisk NE4) --> HERE
Camera bug info:
It appears that some people (like me) have problem with camera. In exactly THIS situation: do full wipe, flash sammy rom+boeffla kernel, reboot and launch camera. Effect? Camera closes with "camera failed" popup.
Possible solution:
1. Read this thread and follow steps --> click
2. Flash Sammy Rom with stock Sammy kernel, run the camera, take a photo, then reboot to recovery and flash my ported kernel
3. Flash Sammy Rom with stock Sammy kernel, run the camera, take a photo, grab file (SlimISP_XX.bin, where XX differs between phones) from /data/cfw/ and backup it where you want. Then if you can always copy it to /data/cfw if your camera doesn't work with my ported kernel. (ATTENTION: Unfortunately this file does not always appear - still don't know why )
Possible explanation, my own research:
I found out that people with ZD and GD will have camera working always. Why? Because these (SlimISP_XX.bin, where XX differs between phones) files are packed within kernel (zImage exactly) and ONLY THESE two are provided by Samsung in their opensource release... Interesting, isn't it? For example, I have GH version, which I may add to zImage manually, however adding more of them breaks the size limit for boot partition, so it's impossible to have all these versions together. However, stock kernel somehow has them, don't know how because zImages aren't extractable.
And just to confirm my theory, I've compiled a kernel with mine version of camera firmware, made full wipe, installed sammy rom+my kernel, rebooted, launched camera and voila - it worked
Thus, we has to live with this bug unless Samsung do something about it or someone else proves me that I'm wrong
Hbohd said:
I compiled it after adding my own script for zzmoove 0.5 settings, so you all have them in boeffla app. Therefore I need to explain what i changed (it is just for testing purposes, I don't know yet if it is better/worse etc).
I enabled early demand (new feature from 0.5 version):
And also enabled lcdfreq scaling with standard values:
Click to expand...
Click to collapse
Installed let see how it goes...
Good work
Tank's
Sent from my GT-I9305 using Tapatalk 2
Hbohd said:
I compiled it after adding my own script for zzmoove 0.5 settings, so you all have them in boeffla app. Therefore I need to explain what i changed (it is just for testing purposes, I don't know yet if it is better/worse etc).
I enabled early demand (new feature from 0.5 version):
And also enabled lcdfreq scaling with standard values:
Click to expand...
Click to collapse
Thanks.
Do you have any link or something where we can read about zzmoove governor tunables? I was searching, and searching and nowhere have I found a good explanation of all parameters.
I should probably look into sources you just gave a link for, but I am too tired atm.
Edit:
Oh that wasn't link to sources, but it doesn't matter, there has to be one somewhere in Boeffla thread.
Sent from my GT-I9305 using Tapatalk 2
My 'sources' are only one file - defconfig. The rest is completely same as Andi's sources
And for any explanation of zzmoove configurables - there is some documentation, quite well explained: https://github.com/andip71/boeffla-...48257af1b13/drivers/cpufreq/cpufreq_zzmoove.c
Cheers
Thanks for the port.
Over night I find this one better on battery than the last port. See how it goes with a bit of heavy usage today.
Sent from my GT-I9305 using Tapatalk 2
Hi Hbohd. So, let me see if I get it: this port will no longer be updated, and you are now the good guy that will continue to update Boeffla kernel to our beloved I9305?
kazoum said:
Hi Hbohd. So, let me see if I get it: this port will no longer be updated, and you are now the good guy that will continue to update Boeffla kernel to our beloved I9305?
Click to expand...
Click to collapse
Yes, you are completely right Ausdim has even mentioned in his thread that he no longer owns our device (i9305) so I decided to ask for his permission to continue his job here !
I am quite in love with usage results of Boeffla kernel, therefore you do not have to worry about frequent updates
Hbohd it will continue the port of the boeffla kernel since i moved to the i9505.
Also i see Andip make some changes to the boeffla sound driver so it will work better.
Thank's
After 1 day with new kernel I can say the battery improve are the best an till now. Great job
Sent from my GT-I9305 using Tapatalk 4 Beta
Nice.. good job man..
Sent from my GT-I9305
Hbohd said:
Yes, you are completely right Ausdim has even mentioned in his thread that he no longer owns our device (i9305) so I decided to ask for his permission to continue his job here !
I am quite in love with usage results of Boeffla kernel, therefore you do not have to worry about frequent updates
Click to expand...
Click to collapse
Well, I'm sad that a developer leaves this phone, but it is awesome to know that Boeffla will continue to be ported to I9305! The best part is the frequent updates Thumbs up!
I'm gonna try your port and will say something later.
beta6
I found 2.12beta6 very smooth on my wife's s3 (i9300) - is it possible to have beta6 for our device? (i9305)
dyy said:
I found 2.12beta6 very smooth on my wife's s3 (i9300) - is it possible to have beta6 for our device? (i9305)
Click to expand...
Click to collapse
What if I told you...
Beta7 is better than beta6
Thanks for your work.
Do you have any information about problems with distorted sound? It happens randomly here, and someone else reported the same here in this thread.
Have you used Perseus kernel? What do you think about 'Master sequence', that is calibrated colors? I am missing that feature (well, that colors.) a little, so I'm just asking if there is any chance we get it too, or you plan to stay strictly with pure Boeffla source?
Sent from my GT-I9305 using Tapatalk 2
kazoum said:
What if I told you...
Beta7 is better than beta6
Click to expand...
Click to collapse
Beta7 is with zmoove 0.5 which is unstable at the moment - beta6 with 0.3
Besides beta6 is so great on my wife's phone that I'm afraid of changing anything
Sent from my GT-I9305 using Tapatalk 2
!crazy said:
Thanks for your work.
Do you have any information about problems with distorted sound? It happens randomly here, and someone else reported the same here in this thread.
Have you used Perseus kernel? What do you think about 'Master sequence', that is calibrated colors? I am missing that feature (well, that colors.) a little, so I'm just asking if there is any chance we get it too, or you plan to stay strictly with pure Boeffla source?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Sincerely, I haven't experienced any random distortions of sound, everything works great. Obviously, if you raise headphone or speaker volume too high, it may be distorted, but it is understandable.
Or did you want to mention the problem with distorted/freezing/stuttering audio on screen-off? That was discussed and it might be caused due to too low screen-off frequency or too high sampling_rate and sampling_rate_sleep_multiplier. If it's the problem, try to change to zzmoove-optimised as it has this values changed a little bit.
About Perseus' screen calibration settings... As for now, introducing such thing would require adding multiple scripts to support variety of configurations for it (in boeffla app), change app to stweaks (which is quite tough task) or wait for new app which will come in some time, made by Andi (and in my opinion, will let us easily configure what we want).
What's more, personally I liked these calibrated colours, however, original colours also seem good to me So nowadays, I do not need it, although I might look at it in my free time and see what can I achieve
dyy said:
Beta7 is with zmoove 0.5 which is unstable at the moment - beta6 with 0.3
Besides beta6 is so great on my wife's phone that I'm afraid of changing anything
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
The fact is, that ausdim released beta4 or 5, I don't remember exactly, and then was my release beta7. And we somehow skipped beta6, you are right! However if I were you, I wouldn't take zzmoove 0.5 as 'unstable'. It introduces a great deal of new configurables that, I suppose will be really beneficiant in the future (when we all will learn what they mean ).
Version 0.5 is ONLY unstable when you are changing governors frequently. Otherwise, it is really efficient and bettery-friendly one (same as 0.3). In addition, it's my beloved governor since its start
Furthermore, new betas always consist of other updates (like Linux kernel upstream to 3.0.82, fixes, optimizations) so it is always worth to use the newest one!
As for now, you may stay with your actual beta version or wait for next update. Andi is testing comparison between zzmoove 0.3 and 0.5 right now, so he haven't pushed any sources, therefore I can't release any new update We are all impatiently waiting for the results i think!
Anybody experienced a problem when the phone CPU is stuck in the max CPU frequency when the phone is plugged in to the PC using USB connection?
I'm using zzmoove battery profile..
Sent from my GT-I9305 using xda app-developers app
inzomnia said:
Anybody experienced a problem when the phone CPU is stuck in the max CPU frequency when the phone is plugged in to the PC using USB connection?
I'm using zzmoove battery profile..
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Have the same problem, no matter the governor i choose.
I try zzmove battery and pegasusq boeffla battery saving
!crazy said:
Thanks for your work.
Do you have any information about problems with distorted sound? It happens randomly here, and someone else reported the same here in this thread.
Have you used Perseus kernel? What do you think about 'Master sequence', that is calibrated colors? I am missing that feature (well, that colors.) a little, so I'm just asking if there is any chance we get it too, or you plan to stay strictly with pure Boeffla source?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
I had this issue with boeffla but only when i used rxtreme rom, i never have it with ripper rom!