i have jelly been on canvas 2 and i have sucessfully rooted it and now am not able to start my phone at all please help me now how to start my phone:crying::crying::crying::crying::crying:
dont worry .. tell me first what you have done with your device .. have you installed cmw recovery before rooting ?
if yes then try to go into cmw .. if ur device is dead then .. install apx drivers in your computer and vonnect your device through usb ( remove battery first brfore connecting the device and press + - and power keys ) a found new hardware will be show your device has been detected .. now install bootloader and afyer that install cmw and rom .. thats it .. hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )
This is a duplicate thread and was closed. It was not deleted because someone may find the answer helpful.
Related
Hi guys i need some help please i rooted my sgs2 gt-19100g using odin1.38 and its all work just fine but when i tried to install a rom for my devise the phone wont start on the recover mode neither downloading mode and i have an image shownc phone try to connect to pc and in the middle of the a yellow triangle
Moved to General Q&A.
DUDE u Bricked ur phone !!!
It seems u made some mistake while flashing ur ROM but dnt worry . IF u have any nanodroid backup restore it or else download any stable ROM for ur device u will find many on xda and jst get a good guide on how to flash a rom and every thing will b all right u will also need to replace ur stock recovery with CWM just search on xda "How to install CWM on ur model no "
HOPE this HELPS
PRESS THANKS PLZZ
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..
yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?
Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:
I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
i think i might have done something wrong
i guess i did format first by using SP FLASH .... please someone provide me files that i need to install using SP FLASH
prakash001 said:
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
Click to expand...
Click to collapse
Proper drivers were not installed while flashing... Install the drivers and try again, else directly flash the stock rom using this guide www.droidarena.in/Thread-Stock-ROM-for-Micromax-Canvas-2-Plus-A110Q
Even I had bricked my phone partitioning once because of no proper driver...
IF nothing helps service centre is always there Good Luck
Hello,
My qmobile i9 was stuck on a bootloop due to flashing a wrong boot.img . i cannot even go to recovery mode . It just can go to the options of recovery mode | Factory Mode . when i select anyone of them the bootloop starts again . Seems Like the firmware has been corrupted . When i connect phone to pc it connects and disconnect simultaneously . Because of this i can't install the driver of the fone . And at while connected to pc it show that my device is offline . I'm so fed up ! Searching on the internet and forums here didn't helped me for the solution . Please ! help me out
Thank You.
SyedFaiz said:
Hello,
My qmobile i9 was stuck on a bootloop due to flashing a wrong boot.img . i cannot even go to recovery mode . It just can go to the options of recovery mode | Factory Mode . when i select anyone of them the bootloop starts again . Seems Like the firmware has been corrupted . When i connect phone to pc it connects and disconnect simultaneously . Because of this i can't install the driver of the fone . And at while connected to pc it show that my device is offline . I'm so fed up ! Searching on the internet and forums here didn't helped me for the solution . Please ! help me out
Thank You.
Click to expand...
Click to collapse
Try asking here [How to] [Root] Qmobile i9
or
because there is not a specific forum for your device, you can start your own thread here general/help
No reply, thread will be closed.
first i have an old micromax a111 which didnt had battery in it.so when i took it to the shop I got the battery but the android was not booting.at repair shop he installed a rom but it came with issues.
phone freezes when activating wifi
pressing the power button once freezes and restarts phone
phone does not shut down stuck at canvas logo
so i want to install another rom which works fine[please if you know about a rom best with a111 please tell me]
i dont know how to root.tried many menthods but none worked
cant install a custom recovery
i am dumb at mobiles so please can anybody give me a tutorial on my situation step by step
pls pls pls pls help me guys
sorry for my bad english