I was unhappy with the ICS, kept crashing my phone. So I decided to flash to stock with these instructions:
---------------------------------
Extract the contents of SGH-T769-UVLB7-k0nane.7z to your computer. You’ll get a file named SGH-T769-UVLB7-hitsquad.tar.
Extract Odin-185.zip to your computer. You’ll get two files: Odin3.ini and Odin 1.85.exe.
Double-click on Odin 1.85.exe to launch Odin3.
Turn off your phone completely.
Put your phone in Download Mode by pressing the Volume Up, Volume Down, and the Power buttons at the same time.
In Odin3, make sure that all the options are unchecked except for “Auto Reboot”.
Click on the PDA tab and select SGH-T769-UVLB7-hitsquad.tar.
Click on the PIT tab and choose the blaze.pit file which you downloaded earlier.
Connect your phone to your computer using a USB cable. Odin3 should recognize it when it displays “Added!” on the message box at the bottom.
Hit the Start button in Odin3 to start the procedure.
Once the procedure is done, your phone will reboot.
Close Odin3 and disconnect your phone to your computer.
Congratulations! You’ve successfully reverted to stock factory firmware and unbricked your Samsung Galaxy S Blaze 4G SGH-T769.
-----------------------------------------
So it said it was a success in Odin, then when restarted I was stuck in the setup wizard. It would always pop up errors:
"the application google services framework has stopped unexpectedly, please try again."
What can I do - PLEASE HELP!
Thanks
Mirc
Related
I Wont Take Any Responsible for any Damage on your Phone.
1.Restore to Stock Recovery
If possible, put your phone into USB Debugging mode (Go to Settings>Applications>Development and check USB Debugging
Be sure your computer has the drivers installed for your Samsung Captivate and is recognized by your computer. You can do this by connecting your device to the computer via USB and allowing the drivers to install automatically. If they will not install, you can download drivers below.
Download Odin3 One-Click and unzip
Open Odin (the only file there)
Put your phone into Download Mode by powering off the device, hold down both volume up and volume down buttons at the same time, and plug the USB from the computer into the phone.
Odin should recognize your phone
Click Start Be patient, this will take several minutes and then your Samsung Captivate will be up and running on the stock rom the factory.
now your captivate is in 2.1-update1
2.Installing CWM on Captivate
Go to the download folder and rename clockworkrecovery.zip to update.zip. Mount your phone and drag the update.zip file into the root directory. It is ok to overwrite the update.zip you used before. When it is done copying turn off your phone.
Unplug your phone and hold down both volume buttons and the power button until a strange menu with blue items pops up. This is called the recovery menu.
Scroll using the volume buttons to the menu item titled "reinstall packages" and press the power button to select. (you may have to do this twice to get it to work)
Your phone should restart and you should be at a green menu.Thats CWM
Download Links
ClockWorkRecovery http://www.mediafire.com/?ve234hbg64ctcu0
Odin 1-Click http://www.digitaltweaker.com/downloads.php?filename=samsung_captivate_stock21
Samsung Drivers
^
Hey OP,
What tha .... ?!?! Where have u been for the past 2 1/2 years ??
:what::beer::what:
Lol. Thanks for offering help. But we are waaaay past the methods u outlined.
Sent from my SAMSUNG-SGH-I777 using xda premium
^^ Agreed ^^
Fundamental Knowledge is Fundamental.
Thread Closed
Hello,
I have tried many many system in my tablet and there is nothing working on with me i need someone who can help me to get the tablet back to default system i have tried cyanogenmod all version my tablet is p6200 and i tried everything now its not working anymore , i need some steps to get it back guys
if you want to go stock rom use Odin and download stock rom for you're country from http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=0&os=1&type=3#firmware
when i connect the usb in laptop its shown
USB Device Not Recolonize what shall i do to get the tablet to default and i have tried many things like i root the tablet and i try manyyyyyy roms so please can you tell me what to do exactly i download the kies program in my laptop what i have to do else ?
Not kies but use Odin and put you're tablet in download mode (power + vol down)
explain please give me the link of odin because i dont know it and when i press in power and volume up its shown
Warning
A custom OS can cause critical problems in tablet and installed applications. if you want to download a custom OS, press the voume up key.
otherwise, press the volume down key to cancel
Volume up : Continue
Volume down: Cancel ( restart tablet )
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
NightZeus said:
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
Click to expand...
Click to collapse
What To Do:
- Make sure Kies is Closed
- Disconnect the Tab from your PC
- Restart your Tab in Download Mode (Power Off Tab then Hold Volume - & Power Button)
- Open Odin , do not change any checkbox items
- Click the PDA button and find the Stock ROM .md5 file and select it (DO NOT HIT START YET)
- Plug in your Tab to the PC at which point the first "ID:COM" box should turn yellow and the Message windows should read "Added"
- Now, Hit Start
- When Completed the "ID:COM" Box should turn Green and right above it it should say "Pass"
The tablet should reboot,
- Disconnect the Tab from your PC
How can i go to download mode if i press on power and volume - its turn to recovery mode how can i go to download mode now
I find how to go to download mode
i open the odin and put the file on PDA and i saw its became yellow and added fine and then i hit start
its not sucess i got faild
what can i do now
try to find a tar.md5 package with a .pit file specifically for your device..,
alternately try flashing a stock Honeycomb ROM.. and booting into recovery and factory reset.
Most importantly research and read, If you can get into Download mode you're 90%+ will be OK
Get ClockworkMod recovery from here
http://forum.xda-developers.com/showthread.php?t=2112667
Use odin to flash it
boot to recovery
wipe system and cache
use odin to install your stock rom again
boot
Hey guys, my friend just gave me his phone model Gt-i5800 to fix, and it stuck in boot (startup). First, I though that just a simple flash will be enough, but it didn't work, I tried to flash it with Odin, but doesn't download all files it stuck there too, can't access recovery as well.
you will be able to tell from this picture.
any ideas?
and thanks.
Plug the device in and charge to 100% on wall outlet.
Download and install Kies 2.6 onto you Windows PC. (While the device charges.)
Open Kies and update if necessary.
When Charged, Plug the device into the PC using OEM cord. Press the "Home" button and make sure battery reads 100%.
Place device into ODIN Download mode. (Press and "HOLD" the Volume Down, and Home buttons. Then "Press and Release" the Power button for 1 second. KEEP holding the two buttons until the warning message or Android appear.)
Inside the Kies Software, select "Tools", then "Update and Initialize Device" follow instructions on the screen.
Note: Once Kies is showing that it is downloading, it would be good to browse to your TEMP folder (Located in Windows 7 @ C:\Users\*Your User Name on Computer*\Local\Temp) and COPY the "Tmp.***.zip" file that will appear to you "Desktop" while the device is reprogrammed. This is the complete factory image of your device, and may be needed later to ODIN Flash if Kies fails!
I don't know much about Android. But recently I bought a DoCoMo S4. When I upgraded it to lollipop I encountered a problem that soft keys were not functional. I tried to get help from different sites and followed the step. But was unable to get that issue resolved. Then I tried the following method and it worked. I am sharing my experience here.
1. Download odin 3.10 to your computer running ms Windows
2. Download latest stock rom from Sam mobile site.
3. It will be a zip file, extract it in a folder.
4. Open odin on your computer and attached your phone via USB cable.
5. Be sure that USB drivers are installed.
6. In odin click on BL and there access the file you extracted at step 3
7. Once file is loaded. Bring your phone to download mode. To do so. Press volume down key, home key simultaneousl. While holding the two keys press the power button. When phone turn on leave the keys. After that press volume key up.
8. Now press start button on odin.
9. Wait for the process to get finished.
10. Enjoy
Hello,
My friend gave me a Samsung Galaxy SM-J100H because it wouldn't go past the Samsung Logo so I tried to root it. I used Odin and everything seemed to be going well until it restarted. When it restarted it said there was a problem with the USB connection. A window appeared with 3 different device drivers and the first two checked with a green tick and the 3rd the Samsung one gave me a red cross. I quickly tried to reinstall the USB driver but to no avail.
Now, I can't get into the Power+Home+Volume Up menu, all I can get is the Power+Home+Volume Down to work which brings up Press Volume Up to Continue. When I do that, even without the USB plugged in it just says Downloading.... Do not turn off target!! I left this overnight in case it somehow cached the root but to no avail.
Have I bricked it totally? Is there any way I can recover this? Is there a program that will wipe everything completely so I can start from Scratch? I refuse to believe that I can't solve a software issue with software. Is there something in the hardware I can do that would wipe everything like using a Jumper to clear the CMOS and BIOS for a PC, is there anything like that I could do? I know there would be any jumpers but maybe connecting certain connections it could effectively wipe it?
Even when I try to start again with Odin I can't since it will just go straight to Downloading.... Do not turn off target!! as soon as I press Volume Up.
Is there ANYTHING I can do?
Hi there and welcome to assist,
If you can enter in download mode using combo Power+Home+Volume Down then you can flash stock firmware. Search with google for this firmware and flash thru Odin.
Flashing instructions:
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
You'll have to create an account to post in the main forums if you have any other questions.
Good luck