Related
This will flash the stock kernel, modem, system, dbdata and cache. There's no need for a pit since we do not have any other OS versions to flash yet that would re-partition your device.
Instructions:
1) Make sure the drivers for the Infuse 4G are installed.
2) Please unzip the .zip file.
3) Run Odin3 v1.81.exe (as administrator if you are on Windows 7)
4) Place your phone into download mode (pull battery, press and hold both Volume keys, put battery in and plug the USB cable in)
5) Make sure your phone shows up in Odin as COM##
5) Click the PDA button and choose the .tar.md5 file in the .zip.
6) Press Start.
7) After it completes, it will reboot your device and should boot up like normal. If it fails on flash see FAQ Question 4 below!
There is ALWAYS risk when flashing your device. Unfortunately, I will not be held responsible. Please use this as a means to get back to stock if something happens.
* DO NOT FLASH PIT (PIT not included).
* DO NOT CHECK ANYTHING IN ODIN EXCEPT "AUTO-REBOOT" AND "F. RESET TIME" (should be checked by default)
FAQ:
Question 1: Why does it have .md5 at the end?
Answer: Its in md5 format so in case your download is corrupted, you dont brick your phone.
Question 2: Can I rename it to just .tar and flash?
Answer: DO NOT rename it from md5 format. If it says the md5 sum is invalid, then it will not flash. Just re-download again and try again.
Question 3: Why does it give an error if i try to open in in 7zip/WinRAR/WinZip?
Answer: It should! Windows doesn't recognize when an md5sum is written to the end of a file. Don't panic!
Question 4: It passed the md5sum check, but failed writing on factoryfs. What do I do?!?
Answer: This is exactly what happened to me. Don't panic. Follow these steps exactly:
* Hold the power button to turn off.
* Make sure Odin is still open.
* Plug the USB cable in and hold the volume keys down at the same time. You will be on the screen with a "Phone ! PC" screen.
* Press Start on Odin.
* Once it completes, it will boot up into recovery. Don't worry about wiping cache or user data. Just choose "Reboot Device".
This flash takes quite a long period of time due to the size of the files. I'd say it took me 5 - 10 minutes for the flash to complete. Be patient! Afterwards it booted up with recovery, and chose Reboot Now.
Thanks:
* codeworkx - for the advice and assistance!
* beatblaster - First tester after a bad framework-res update.
* Realityfalse - Second tester
* dotsad - Third tester
* imnuts - Very Helpful advice and instructions for Odin installations!
* My Infuse - Fourth and final tester (thought I lost her for a minute there!)
Download Links:
UCKD5 Stock + Root + 3e Modded Recovery
UCKD5 100% Stock (no root, no 3e Modded Recovery)
What a life saver
I second that, up and running again
Sent from my SAMSUNG-SGH-I997 using XDA App
not working
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837
Though it's too late for me to try it myself, I'm sure this will be a great help to everyone! Thanks so much!
Sent from my SAMSUNG-SGH-I997 using XDA App
Dani897 said:
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837
Click to expand...
Click to collapse
same thing what i have to do ?
well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.
Dani897 said:
well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.
Click to expand...
Click to collapse
did you fix your phone and work fine now or still his lock Bootloader ?
no it was someone else. i have fixed my captivate many time though. that would have normally been my next step if it didnt work the first time.
rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using XDA App
Can you wipe all user data and wipe cache from recovery (power phone off via power button or battery pull, hold both volune keys down, then hold power down until samsung appears on the screen and let go of ONLY power)? That should get you to boot.
This happened to beatblaster when we tested. Then he did the data wipes in recovery and booted up fine.
cant get recovery at all. tried all above. pit doesnt work
Thanks
Thanks for doing this, I am trying to learn how to dev on android and Ubuntu and was installing and also waiting for a way back before doing anything.
rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Have you tried to wipe data and cache yet?
rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Was your phone bricked before trying this? If so, how did you brick it?
Sent from my SAMSUNG-SGH-I997 using XDA App
wasnt bricked. wanted to try odin restore.
how can I clear data and cache without recovery? is there a way in ODIN?
rblankman said:
how can I clear data and cache without recovery? is there a way in ODIN?
Click to expand...
Click to collapse
TO get into recovery to wipe data and cache, unplug your phone from the USB cable then make sure the phone is powered off. While the device is powered off press and hold the 2 volume buttons then while holding those 2 volume buttons down press and hold the power button. That will get you into recovery. WHile in there, you can wipe user data and wipe cache. Give that a go.
understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.
rblankman said:
understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.
Click to expand...
Click to collapse
Whoa. The only thing I can recommend from here is to try to flash via ODIN again or take the brick back to the store and swap for new. Next time, I'd recommend not fixing anything unless it's broken
Hello
I was using my infuse running REMICS 1.2a custom rom perfectly fine. In fact, it was so nice that I decided to make a backup of it. I went to rom manager, selected backup, the phone restarted in blue CMW recovery and did the job (supposedly)... but right after that it just reboots into recovery. ALWAYS.
Tried to restore using the backup I just made but it still boots into recovery. Wiped data, cache, devik cache, etc... tried reinstalling the rom using "install zip from sd card".... it clearly installed just fine but it still reboots on blue CWM recovery. Tried many other roms, no luck.
Tried using Heimdall one click, it recognizes the phone but fails. After that when I try to put the phone in download mode it now shows a phone, a yellow triangle and a monitor on the screen and says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Now I can't even go into recovery mode. As soon as I start the phone it shows me that message. Opened Kies but I'm not sure what to do.
Downloaded Odin, tried to flash several md5 images (as an administrator) and it fails: "Complete write operation failed".
please help! don't know what to do!
That is another form of download mode...try another usb run the one click again...
domenicostorino said:
Hello
I was using my infuse running a REMICS 1.2a custom rom perfectcly. In fact, it was so nice I decided to make a backup of that rom. I went to rom manager, selected backup, it restarted in blue CMW recovery and did the job (supposedly)... after that it just reboots into recovery. ALWAYS.
Tried to restore using the backup I just made but it still boots into recovery. Wiped data, cache, devik cache, etc... tried reinstalling the rom using "install zip from sd card".... it clearly installed just fine but it still reboots on blue CWM recovery. Tried many other roms, no luck.
Tried using Heimdall one click, it recognizes the phone and but fails. After that when I try to put the phone in download mode it now shows a phone, a yellow triangle and a monitor on the screen and says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Now I can't even go into recovery mode. As soon as I start the phone it shows me that message. Opened Kies but I'm not sure what to do.
Downloaded Odin, tried to flash several md5 images (as an administrator) and it fails: "Complete write operation failed".
please help! don't know what to do!
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using xda premium
I've always heard that Rom manager is known for bricks...next time just back it up in cwm...hope you get heimdal working-like bigjoe said, your just entering a different form of download mode.
Sent from my HTC PH39100 using xda app-developers app
This happened to me once.. I was able to use Odin and got it working. Hope you get it working
Sent from my SAMSUNG-SGH-I997 using xda premium
HI,
i've been wanting to root and install custom roms on the i9003. i finally got the courage to try to root and do all these things recently, so i rooted the phone using superoneclick.. but i didnt know what to do next, because i wanted to try out custom roms because of what i have been reading on the forums.
so i followed the instructions here: http://forum.xda-developers.com/showpost.php?p=19442301&postcount=1 and flashed the bagaria.tar found here using ODIN.
but it started looping and kept rebooting over and over again. and got stuck in bootloop. eventually it came up and would respond a bit before going back to the booting sequence, and i noticed that opening CWM automatically sent the phone to booting.
thinking that i did something wrong and afraid that i bricked the device i went to this thread and looked for the dxkp9 stock and used odin with it (http://forum.xda-developers.com/showthread.php?t=1004647)
it just is stuck on boot loop now.
i've tried removing the battery and trying holding the VOLup home and power to no avail.
its just stuck in boot loop.
It is currently stuck in boot loop and wont do anything. i am really hoping it can still be fixed.. a bit of a sentimental value since this was a phone given to me by my dad, and first smartphone as well..
i would be very grateful for any kind of help.
getlucky88 said:
HI,
i've been wanting to root and install custom roms on the i9003. i finally got the courage to try to root and do all these things recently, so i rooted the phone using superoneclick.. but i didnt know what to do next, because i wanted to try out custom roms because of what i have been reading on the forums.
so i followed the instructions here: http://forum.xda-developers.com/showpost.php?p=19442301&postcount=1 and flashed the bagaria.tar found here using ODIN.
but it started looping and kept rebooting over and over again. and got stuck in bootloop. eventually it came up and would respond a bit before going back to the booting sequence, and i noticed that opening CWM automatically sent the phone to booting.
thinking that i did something wrong and afraid that i bricked the device i went to this thread and looked for the dxkp9 stock and used odin with it (http://forum.xda-developers.com/showthread.php?t=1004647)
it just is stuck on boot loop now.
i've tried removing the battery and trying holding the VOLup home and power to no avail.
its just stuck in boot loop.
It is currently stuck in boot loop and wont do anything. i am really hoping it can still be fixed.. a bit of a sentimental value since this was a phone given to me by my dad, and first smartphone as well..
i would be very grateful for any kind of help.
Click to expand...
Click to collapse
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down+home then power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
hard lesson learned
wee2wee said:
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down,+menu+power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
Click to expand...
Click to collapse
:good:
thanks a lot for helping out the newbies like myself.
t is working again and i used the superoneclick method to root my phone.
is there like a recommended "rom" sli9003 users can start with as far as trying things out that arent touchwiz?
i tried (http://forum.xda-developers.com/showthread.php?t=1894737) but i would appreciate it if someone can point me to the right direction. as i am looking forward to learn more
thanks a lot!
getlucky88 said:
:good:
thanks a lot for helping out the newbies like myself.
t is working again and i used the superoneclick method to root my phone.
is there like a recommended "rom" sli9003 users can start with as far as trying things out that arent touchwiz?
i tried (http://forum.xda-developers.com/showthread.php?t=1894737) but i would appreciate it if someone can point me to the right direction. as i am looking forward to learn more
thanks a lot!
Click to expand...
Click to collapse
Make sure you know what you are doing before trying anything....try this http://forum.xda-developers.com/showthread.php?t=1492113
wee2wee said:
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down,+menu+power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
Click to expand...
Click to collapse
Sir in my case everything goes well but after flashing with step 2 as mentioned above i get an error saying "E does not exist/ not possible" and the phone gets stuck in boot loop again where as after flashing the step 1 it was asking for password.
Pls help
rss31183
rss3183 said:
Sir in my case everything goes well but after flashing with step 2 as mentioned above i get an error saying "E does not exist/ not possible" and the phone gets stuck in boot loop again where as after flashing the step 1 it was asking for password.
Pls help
rss31183
Click to expand...
Click to collapse
After flashing step 1, did your phone restart/reboot normally?..what was asking for password? "everything goes well" for step1?
after flashing the files (pda modem etc.) the phone rebooted. but now is asking for a password go further. and when i tried to enter recovery and set it to factory settings it also asks for password before wiping the divice. tried a few times but with no success.
manu2002 said:
the password is maybe : samfirmware.com ............. maybe i saw it on http://forum.xda-developers.com/showthread.php?p=12310841#post12310841 below every rom
Click to expand...
Click to collapse
Greetings;
I didnt read all the stuff before...
So my answer may not be the best or accurate. (I'm almost out of time - sorry for that).
Either ways this happens to me when you don't perform a clean Flash (Formating Partitions before Flashing, wiping dalvik and cache) and after Flashing; performing a Factory Reset).
After the last step (Factory Reset) it should boot properly.
If not: Remove Battery, place it back and test if it boots.
From my experience: Downgrading ROM also do this issue. But i fix it by Flashing FULL DDLF2 (always with "clean flash") and then after my ROM Boots; Flashing the ROM i want to use.
Hope this helps.
When i flashed the first step my gt i9003 sl went completely blank except a bright light. Any solution or suggestiom
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.
MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.
mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient
Hi,
I'm having hard times trying to fix my tablet. Here are the specs:
Model: GT-P3100
Android: 4.2.2
Kernel: 3.0.31-CM
Cyanogenmod v.: 10.1.2-p3100
Recovery: 6.0.1.0
OEM Data Cable
The problem is: The tablet is randomly restarting. So I've tried to flash some roms (Cyanogen12, 13, STOCK Rom) via External SD Card. None of them worked. (Installation aborted, no error messages). Whenever I uninstall any app using the Android App Manager, it uninstalls but then installs again after a few seconds. I already did factory reset, wipe cache, dalvik, .. and even wipe /system, /sd, .. partition didn't work. It always boots on Cyanogen with the same apps installed. Inside the '0' folder there are other folders just like an infinite loop(the same folders I have in the root folder, I have inside the '0' folder, and inside that folder, another '0' folder containing the same files.
Then I did install TWRP using Odin, the device was recognized and the PASS message appeared sucessfully. After the reboot, CWM was still installed and I couldn't load the TWRP Recovery.
Whenever I try to use Kies, a connecting message appears but never ends.
Can anybody help?
my beloved friend,
in odin options remove the Auto reboot option
then flash the twrp
( the device wont reboot)
when it goes PASS
remove the battery and put it back
press the buttons to go to twrp
-Hope- said:
my beloved friend,
in odin options remove the Auto reboot option
then flash the twrp
( the device wont reboot)
when it goes PASS
remove the battery and put it back
press the buttons to go to twrp
Click to expand...
Click to collapse
Still got CWM installed...
It seems my SD is somehow write-protected. I've tried to do a "NAND erase all" but it fails after the "erase..." message.
When I connect the tablet to my Notebook, I can delete/write files. in the Internal Storage. Very weird
ccmkbr said:
Still got CWM installed...
It seems my SD is somehow write-protected. I've tried to do a "NAND erase all" but it fails after the "erase..." message.
When I connect the tablet to my Notebook, I can delete/write files. in the Internal Storage. Very weird
Click to expand...
Click to collapse
there is no need to nand erase, mate make sure you are doing it right.
-Hope- said:
there is no need to nand erase, mate make sure you are doing it right.
Click to expand...
Click to collapse
I've done the following steps:
1 - Turned the Tablet On in Download Mode.
2 - Unticked Auto Reboot.
3 - Selected the TWRP file in "AP".
4 - Plugged the USB Cable.
5 - Clicked on Start.
6 - Waited for the "Pass" message.
7 - Unplugged the USB Cable.
8 - Removed the battery plug.
9 - Waited 10 seconds and plugged in again.
10 - Restarted in Recovery mode.
But I still got the CWM installed.
The pictures of the procedures that I did are attached.
ccmkbr said:
I've done the following steps:
1 - Turned the Tablet On in Download Mode.
2 - Unticked Auto Reboot.
3 - Selected the TWRP file in "AP".
4 - Plugged the USB Cable.
5 - Clicked on Start.
6 - Waited for the "Pass" message.
7 - Unplugged the USB Cable.
8 - Removed the battery plug.
9 - Waited 10 seconds and plugged in again.
10 - Restarted in Recovery mode.
But I still got the CWM installed.
The pictures of the procedures that I did are attached.
Click to expand...
Click to collapse
if you are rooted, try to use the twrp app from playstore
-Hope- said:
if you are rooted, try to use the twrp app from playstore
Click to expand...
Click to collapse
Yes, I'm rooted. Sadly, the tablet reboots whenever I try to install an Application (Via Playstore or Apk).
I already did try installing TWRP using ADB Shell(direcly inside the mmc block) but CWM keeps being the recovery.
Trying to do a Nand erase, I've got an error, as you can see in the attachment.
ccmkbr said:
Yes, I'm rooted. Sadly, the tablet reboots whenever I try to install an Application (Via Playstore or Apk).
I already did try installing TWRP using ADB Shell(direcly inside the mmc block) but CWM keeps being the recovery.
Trying to do a Nand erase, I've got an error, as you can see in the attachment.
Click to expand...
Click to collapse
Why did you check repartition?
-Hope- said:
Why did you check repartition?
Click to expand...
Click to collapse
To avoid any more trouble in the future, I was sending the PIT file as well.
ccmkbr said:
To avoid any more trouble in the future, I was sending the PIT file as well.
Click to expand...
Click to collapse
Mate, pit may kill your device or mess up the phone it it was lucky to boot.
To let you know, nand erase will require you to load the firmware
Please don't do an erase, lucky that your phone booted, please uncheck repartition
And band erase
You said you are having problem installing apps,
When did this happen?
After flashing pit?
-Hope- said:
Mate, pit may kill your device or mess up the phone it it was lucky to boot.
To let you know, nand erase will require you to load the firmware
Please don't do an erase, lucky that your phone booted, please uncheck repartition
And band erase
You said you are having problem installing apps,
When did this happen?
After flashing pit?
Click to expand...
Click to collapse
No, it was included in the initial problem(random reboots), that's why I'm trying to recovery the Tab. This is my uncle's tablet, he said he didn't do anything unusual lately. The cyanogen mod was installed by a technician, a long time ago.
I'm 99% sure it's EMMC problem related, as -Hope- told me via Discord.
For more information, see: https://forum.xda-developers.com/galaxy-tab-2/general/discussion-alternative-tab-2-emmc-bug-t3306862
I would like to thanks -Hope- for all the efforts trying to revive my Tablet . I said before and I'll say again, you are a GREAT person!! Really thanks buddy!