Database Info

[Q] How to install Kernels

I just rooted the G2x and I have the Weapon ROM installed. How do I use and install kernels. The G2x was the first android I had that I felt should be rooted.

You install them the same way you install any ROM, through recovery. Just make sure the kernel is compatible with your ROM.
Sent from my LG-P999 using xda premium

Alright thanks for your help!!!!!!

Don't forget to wipe cache and Dalvik cache

marquise10 said:
Alright thanks for your help!!!!!!
Click to expand...
Click to collapse
Fix permissions afterwards too
Sent from my LG-P999 using xda premium

When I do it. It just says like no such directory. Or install fail. I did it through Tom Manager and recovery. I'm trying to get FLUXI for Miui 112160. I'm dieing to get a better kernel BC it only lets me over clock it to 1000. On GB it let me do it to like... 1450 or something. But I need a better kernel. Please help me install this. Ill give the link I got the Kernel from.
Here it is right below this. All help is appreciated.
http://forum.xda-developers.com/showthread.php?t=1489470

9595jakob said:
When I do it. It just says like no such directory. Or install fail. I did it through Tom Manager and recovery. I'm trying to get FLUXI for Miui 112160. I'm dieing to get a better kernel BC it only lets me over clock it to 1000. On GB it let me do it to like... 1450 or something. But I need a better kernel. Please help me install this. Ill give the link I got the Kernel from.
Here it is right below this. All help is appreciated.
http://forum.xda-developers.com/showthread.php?t=1489470
Click to expand...
Click to collapse
Are you aware that the kernel from the link in your post is for the Samsung Galaxy S2? So, if you have the LG G2X for the sake of your device, please don't use that.
Sent from my LG-P999 using xda premium

DupleX01 said:
Are you aware that the kernel from the link in your post is for the Samsung Galaxy S2? So, if you have the LG G2X for the sake of your device, please don't use that.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Really!? Well...what is the best Kernel for my G2X Miui??? And please tell me how to install it.

9595jakob said:
Really!? Well...what is the best Kernel for my G2X Miui??? And please tell me how to install it.
Click to expand...
Click to collapse
Sorry for being absent.
First thing you need is to Nvflash clockworkmod(CWM) recovery. You can find it in the application and development section.
Then either choose faux kernel:
http://forum.xda-developers.com/showthread.php?t=1102720
Or the trinity(go for the T15 max for OC) kernel from this MIUI thread:
http://forum.xda-developers.com/showthread.php?t=1412046
Make a nandroid backup before you proceed flashing those kernels inn CWM. Read the instructions in both linked thread for the proper way of installing kernels/mods.
Good luck!
Sent from my LG-P999 using xda premium

DupleX01 said:
Sorry for being absent.
First thing you need is to Nvflash clockworkmod(CWM) recovery. You can find it in the application and development section.
Then either choose faux kernel:
http://forum.xda-developers.com/showthread.php?t=1102720
Or the trinity(go for the T15 max for OC) kernel from this MIUI thread:
http://forum.xda-developers.com/showthread.php?t=1412046
Make a nandroid backup before you proceed flashing those kernels inn CWM. Read the instructions in both linked thread for the proper way of installing kernels/mods.
Good luck!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Its ok, and i will try, mmm, so you perfer the Trinity T15 Max?
---------- Post added at 08:49 PM ---------- Previous post was at 08:44 PM ----------
9595jakob said:
Its ok, and i will try, mmm, so you perfer the Trinity T15 Max?
Click to expand...
Click to collapse
lol, stupid firefox, i got it. nvm, im attempting to flash right now
---------- Post added at 09:04 PM ---------- Previous post was at 08:49 PM ----------
9595jakob said:
Its ok, and i will try, mmm, so you perfer the Trinity T15 Max?
---------- Post added at 08:49 PM ---------- Previous post was at 08:44 PM ----------
lol, stupid firefox, i got it. nvm, im attempting to flash right now
Click to expand...
Click to collapse
OOOOOOOOOOOOh, Kay, i flashed it, but it still says a maximum of 1000 MHz.

try uninstalling your cpu controller and reinstalling it, it may have the old values still.

mt3g said:
try uninstalling your cpu controller and reinstalling it, it may have the old values still.
Click to expand...
Click to collapse
AWESOME! THANKS MAN! its now a max of 1560MHz. btw what do you advise me to be running it on? like the Max and Min.

9595jakob said:
AWESOME! THANKS MAN! its now a max of 1560MHz. btw what do you advise me to be running it on? like the Max and Min.
Click to expand...
Click to collapse
I never over clock the device if anything I underclock mine lol. When I do overclock it though I go to the max just to show off to my friends, I don't play games at all pretty much besides simple ones like draw something, and solitaire things like that.

9595jakob said:
Its ok, and i will try, mmm, so you perfer the Trinity T15 Max?
I prefer faux's kernel since i feel it consumes less juice. Same according as mtg3, i underclock/undervolt it to save battery juice. Happy that it is working for you!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse

[ROM] Cyanogenmod 7.2.0 for Samsung Epic 4G

CM7.2.0: Android 2.3.7 for the Samsung Epic 4g
Release Notes​
CM7 is still alive and kicking!
Please note: This is CM7.2, newer than the nightly builds (Which stopped at 45).
Aug 06 - 7.2.0 Released!
QBKing77 was kind enough to produce a couple of videos about Epic's CM7
Please note that these were done before WiMAX was released.
Download Links, Installation Instructions, and more!
Check the CM7 Status Page on the CM Blog for downloads! (Or the Get.cm link directly)
HOW TO REPORT BUGS OR PROBLEMS?
Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
Pastebin links preferred
Thanks to the community, and the developers!
Without them, this would not have been possible!
This rom is a result of many tiring hours from Decad3nce, noobnl, jt1134, Uberpinguin, nubecoder, mkasick, nullghost, dameon78, wispofattes, DRockstar, and many many other contributors.
Latest testing build

First and I'm on It already
So first there too...
Sent from my SPH-D700 using xda premium

had a feeling something to flash was coming tonight!

DrKaotica said:
had a feeling something to flash was coming tonight!
Click to expand...
Click to collapse
Last Test Release B4 RC Comes Out.
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
Big Goron said:
First and I'm on It already
So first there too...
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
For you to test battery i'd completely charge for an hour past 100% and while off and turn on and drain it however and till it actually dies out or very close to it. then re charge back up to 100% again and next cycle should be plenty better, im sure you know that, but just saying.
In attachments is from Nightly 45 1st pic is with airplane mode for about 5 hours or so, forgot to take pic of other screen that day

So we went back down from RC0 to Beta?

SpicyBurrito said:
So we went back down from RC0 to Beta?
Click to expand...
Click to collapse
never were in the RC0 stage we were never in alpha nor beta kind of confusing i know? but even though it was pretty much stable it wasn't 99-100% stable so no RC was ever released to the best of my knowledge of that case

XxLostSoulxX said:
never were in the RC0 stage we were never in alpha nor beta kind of confusing i know? but even though it was pretty much stable it wasn't 99-100% stable so no RC was ever released to the best of my knowledge of that case
Click to expand...
Click to collapse
[ROM] CyanogenMod 7.2.0 RC0 for Samsung Epic 4G SPH-D700 - Now with WiMAX!
Click to expand...
Click to collapse
I'm not going to argue about what version it was, but I'm just curious. That's all.

Technically, 7.2.0-RC0 was the full Cyanogenmod version. This is the beta 1 for the Epic, with CM7.2.0-RC1, I think.
So yes, its slightly confusing

SpicyBurrito said:
I'm not going to argue about what version it was, but I'm just curious. That's all.
Click to expand...
Click to collapse
Who said anybody was arguing? I'm explaining it, please re read what I'm actually saying. Sorry you feel that way that I may came off as arguing but surely I wasn't
Sent from my SPH-D700 using xda premium

XxLostSoulxX said:
Who said anybody was arguing? I'm explaining it, please re read what I'm actually saying. Sorry you feel that way that I may came off as arguing but surely I wasn't
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I wasn't either. I just didn't want it to turn to that
But regardless, it was explained. Thank you.

So we flash the 20110828 GAPPS?

stir fry a lot said:
So we flash the 20110828 GAPPS?
Click to expand...
Click to collapse
Good question was thinking the same thing, gr8 to see this moving forward!
..........sent from today's android = 4.0.3!

Edit: nevermind. Read the blog.
Sent from my SPH-D700 using XDA

I remember having so much trouble using an alternative kernel. I had to do this.
Flash cm9, gapps, samurai kernel. Boot.
Go back into cwm flash cm9 and kernel. Boot
Then one more time I went back into cwm and flashed the gapps.
Then I could install apps and everything would work . Now I remember how much a pain in arse this ROM was with another kernel.
Sent from my SPH-D700 using xda premium

Big Goron said:
I remember having so much trouble using an alternative kernel. I had to do this.
Flash cm9, gapps, samurai kernel. Boot.
Go back into cwm flash cm9 and kernel. Boot
Then one more time I went back into cwm and flashed the gapps.
Then I could install apps and everything would work . Now I remember how much a pain in arse this ROM was with another kernel.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
i had no problems all i did was wipe, then flash ROM, then Gapps, then kernel. then reboot and was completely fine. seeing how you had problems maybe you should've flashed rom > kernel> gapps
stir fry a lot said:
So we flash the 20110828 GAPPS?
Click to expand...
Click to collapse
yes

XxLostSoulxX said:
i had no problems all i did was wipe, then flash ROM, then Gapps, then kernel. then reboot and was completely fine. seeing how you had problems maybe you should've flashed rom > kernel> gapps
yes
Click to expand...
Click to collapse
I think that was him having to hit the stop sign before learning to stop lol. What I mean is, he forgot to flash gapps the first 2 times and now he knows that he needs to flash the gapps after the rom in order for everything to work right lol
Sent from my HP TouchPad on CM9 using Tapatalk

Quick Update On Battery!
Running On Samurai Tanto @ 100/1000 VR | Conservative w/UV. About medium brightness, no airplane mode probably would give me another hour or two on overall battery life and and probably another hour for screen on time.
I thought I could do much better but I guess if you drag it out with various usage all day it would last longer I got another screenie from 2 days ago I believe and got 4 Hours of screen on time but around a day for overall battery life and that was on Nightly 45 though
Sent from my SPH-D700 using xda premium

Okay so I'm soo lost and confused.. all I'm trying to figure out is is this rom and update to nightly 45 or is it a whole different thing? Does it work better than nightly 45 or is it kinda like a restart and has bugs again?
Sent from my SPH-D700 using XDA App

lilajrestnom said:
Okay so I'm soo lost and confused.. all I'm trying to figure out is is this rom and update to nightly 45 or is it a whole different thing? Does it work better than nightly 45 or is it kinda like a restart and has bugs again?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
very few bugs its an upgrade from Nightly 45 because it has some of the CM9 bugs worked out but fixed in here like audio issues, ringing of death, sd card ringtone fix as well

XxLostSoulxX said:
very few bugs its an upgrade from Nightly 45 because it has some of the CM9 bugs worked out but fixed in here like audio issues, ringing of death, sd card ringtone fix as well
Click to expand...
Click to collapse
Yupp I just opened the links in the op didn't notice them the first time but thank you for helping clear that for me I'm gonna flash =)
Sent from my SPH-D700 using XDA App

3.0.42 TAMCORE and sluggish chrome

I've been using opensensation for a while now and I've tried using the latest TAMCORE kernel but whenever I open chrome it becomes molasses. When I switch down to version .38 the slow down goes away. Does anyone one else experience this? Just trying to see if it is something on my end.
Sent from my HTC Sensation using xda app-developers app

This should be asked in questions and answers
Sent from my Sensation

Wrong section.ugh
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

dancnpete said:
I've been using opensensation for a while now and I've tried using the latest TAMCORE kernel but whenever I open chrome it becomes molasses. When I switch down to version .38 the slow down goes away. Does anyone one else experience this? Just trying to see if it is something on my end.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I have had nothing but problems with Tamcore on AOKP with my configuration, I think its more of a problem on my end than it is on his kernel. But I switched to CM9 and am running the stock kernel with no problems. My dad on the other hand can run AOKP with Tamcore fine, I don't know what the difference is. I've never tried open sensation so I can't vouch for that. What gov. are you using?
Ohh and BTW, if a mod doesn't get this thread moved soon, your going to get a new one ripped by all the 12 year old 'devs' who will yell at you because this is the Dev section, if they were a real dev they'd politley tell you "wrong section, try to post in the Q&A forum first, but heres the problem.." After doing so, they'll most likely refer you to their donate button in their signature in case one of their 13 posts have helped you or someone else.
- Just a heads up.

fandroid93 said:
I have had nothing but problems with Tamcore on AOKP. Thats why I switched to CM9 lol. My dad on the other hand can run AOKP with Tamcore fine, I don't know what the difference is. I've never tried open sensation so I can't vouch for that. What gov. are you using?
Ohh and BTW, if a mod doesn't get this thread moved soon, your going to get a new one ripped by all the 12 year old 'devs' who will yell at you because this is the Dev section, if they were a real dev they'd politley tell you "wrong section, try to post in the Q&A forum first, but heres the problem.." After doing so, they'll most likely refer you to their donate button in their signature in case one of their 13 posts have helped you or someone else.
- Just a heads up.
Click to expand...
Click to collapse
Thanks for the help, frankly I find it quite difficult to know where to start a discussion nowadays. I'm not a developer so I should have started this in the Q&A section (I know that now). thank you for politely showing me the way.

dancnpete said:
Thanks for the help, frankly I find it quite difficult to know where to start a discussion nowadays. I'm not a developer so I should have started this in the Q&A section (I know that now). thank you for politely showing me the way.
Click to expand...
Click to collapse
No problem man. I wish I could help more.

If you think it's a bug in my kernel (however, I don't have a device with this problem), create an entry in my bugtracker and provide real infos (every other report would get ignored and closed). Currently you tell us nothing about your settings.
Sent from my iPhone using Tapatalk 2

TamCore said:
If you think it's a bug in my kernel (however, I don't have a device with this problem), create an entry in my bugtracker and provide real infos (every other report would get ignored and closed). Currently you tell us nothing about your settings.
Sent from my iPhone using Tapatalk 2
Click to expand...
Click to collapse
I don't think my particular problems are with your kernel but I think they are from my configuration. Like I said, my dad runs your kernel just fine but whatever I must do with system kill must cause problems with your kernel. I should have been more specific before I said "I have nothing but problems with TamCore" because at one point TamCore was the only kernel I ran because it was so smooth and had no issues whatsoever, its definitely more of a problem on my end, not yours.

Maybe. But the OP is just asking. He could get more help if he would tell us a bit about his settings.

TamCore said:
Maybe. But the OP is just asking. He could get more help if he would tell us a bit about his settings.
Click to expand...
Click to collapse
and this is where my ignorance kicks in, what particular info would you like, I assume I'd have to do a logcat, but I've never done one before, should I reload the .42 kernel and try running chrome with a program like catlog running? thanks again for your work and your help,

dancnpete said:
and this is where my ignorance kicks in, what particular info would you like
Click to expand...
Click to collapse
Lets start with simple infos like CPU Settings. (Min/Max Freq, Governor, Scheduler, all you find)
dancnpete said:
I assume I'd have to do a logcat, but I've never done one before
Click to expand...
Click to collapse
blahbl4hblah made a nice guide for this http://forum.xda-developers.com/showthread.php?t=1616059
dancnpete said:
should I reload the .42 kernel and try running chrome with a program like catlog running?
Click to expand...
Click to collapse
Try to reproduce your problem with every release that is newer than the .38 one. This would help very much.

Thanks I will when I get back in front of a real computer.
Sent from my HTC Sensation using xda app-developers app

Is this fake?

Can someone tell me is this cm10 fake?
http://crackteam.crackflasher.com/edison/cm10/
Sent from my ME865 using xda premium

I think ist real ill try it...wish me luck lol
From my locked down superchargedV6 1.425ghz A "What tha duce?"

daavvis said:
I think ist real ill try it...wish me luck lol
From my locked down superchargedV6 1.425ghz A "What tha duce?"
Click to expand...
Click to collapse
please let us know if it works.if you can flash that,can you tell me is there a custom recovery(cm) included in that rom?thanks.(someone flashed this rom on ME865 and bricked his phone,i just want to tell you)
sorry for my bad english

sunnytse1 said:
please let us know if it works.if you can flash that,can you tell me is there a custom recovery(cm) included in that rom?thanks.(someone flashed this rom on ME865 and bricked his phone,i just want to tell you)
sorry for my bad english
Click to expand...
Click to collapse
so far no good it flashed but i got stuck on the cyanogen circle..... it may have been my fault for more than one reason
i DID NOT wipe cache, cause i was on magicmod and tried to just upgrade, prob the culprit
recovery locked up on me directly after i opened justinbeanaroma to install inverted g apps, but i didnt reboot first, so could have been that
i installed through cm10 recovery, and there was no recovery after i installed this rom, so i think the data files left from no wipe may have either messed with this cm10 recovery, or this one doesnt have one
i had to rds back to 2.3.6 and just got back to leak 1
im gonna root real quick and install through bootstrap and ill let u guys know whats up
hashcodes name is on this tho, so i think i messed up, and i think this might still work....
edit..... gotta charge up a bit first in case i gotta rds back again lol

hope you will success! waiting for your reply.

ok guys im stupid.... see the "kexec log" at the top? this is for safestrap, explains y theres no recovery and y im stuk on the cyanogen screen again.....
im gonna re rds again and try this with safestrap, only cause theres like 80 roms on this site lol
ill keep u guys updated

daavvis said:
ok guys im stupid.... see the "kexec log" at the top? this is for safestrap, explains y theres no recovery and y im stuk on the cyanogen screen again.....
im gonna re rds again and try this with safestrap, only cause theres like 80 roms on this site lol
ill keep u guys updated
Click to expand...
Click to collapse
Downloading now..
This is a bit weird,
There are cm9, aosp and one CNA rom, also theyve given logs for kexec version for cm10..
Have we got a kexec for our A2 ??
any luck daavis ??
EDIT:
The crackflasher forums dont show a Atrix 2 subforum

Do you guys know who make this rom
and why there is no thread about it in xda?
(I found that link in a chinese website.)
Sent from my ME865 using xda premium

sunnytse1 said:
Do you guys know who make this rom
and why there is no thread about it in xda?
(I found that link in a chinese website.)
Sent from my ME865 using xda premium
Click to expand...
Click to collapse
ok folks after a bunch of crap, feeling like a noob for a few hours, then cunsulting with the master of masters mr jimbridgman (next time i think of him or someone smarter than me first.... lol) heres the deal....
these roms are a test so to speak, and as far as i know none of them work, not cause they are faulty, but because kexec is not working properly on our phones, you can install it, you can wipe install and everything else really cool in a custom recovery, but the clincher is, when you try to boot the "safe system" the phone just hangs on a black screen.....
however.....
as a recovery tool only, safestrap isnt bad lol...
so the greatest question of all, can we port some of these to run without safestrap.... ill look into it.... must be possible...

daavvis said:
ok folks after a bunch of crap, feeling like a noob for a few hours, then cunsulting with the master of masters mr jimbridgman (next time i think of him or someone smarter than me first.... lol) heres the deal....
these roms are a test so to speak, and as far as i know none of them work, not cause they are faulty, but because kexec is not working properly on our phones, you can install it, you can wipe install and everything else really cool in a custom recovery, but the clincher is, when you try to boot the "safe system" the phone just hangs on a black screen.....
however.....
as a recovery tool only, safestrap isnt bad lol...
so the greatest question of all, can we port some of these to run without safestrap.... ill look into it.... must be possible...
Click to expand...
Click to collapse
It is possible, if you include kexec and the kernel files in the right location in the ROM that is built from this, then the phone will boot fully, and do a soft reset with the new kernel. I am not too sure that even that will work well. I have not had much luck with kexec in ICS yet. I had it working on GB and even was able to boot my early CM7 builds, but after an update in MAY that stopped working too. So.... good luck.

jimbridgman said:
It is possible, if you include kexec and the kernel files in the right location in the ROM that is built from this, then the phone will boot fully, and do a soft reset with the new kernel. I am not too sure that even that will work well. I have not had much luck with kexec in ICS yet. I had it working on GB and even was able to boot my early CM7 builds, but after an update in MAY that stopped working too. So.... good luck.
Click to expand...
Click to collapse
so.... um.... i kinda got it to boot..... forked the recovery from wangs cm10 and some other files and she lit up.... well it got as far as lighting up the soft keys lol...... im installing gapps now to see it that was the issue, may have forked some files that confused the ol girl, but hey, at least i have recovery lol
edit: ok so this time it made it through "android is upgrading, then it soft booted.... and got stuck at the cyanogenmod splash screen.... im close i can feel it lol

hey daavis, i had sent a mail asking whether this is in fact for the A2.. Got this reply..
Aniruddha:
My apologies for not having the appropriate threads set up ahead of time. CrackFlasher is still quite new, and the three users that moderate it, all have very busy schedules.
Please find the below threads that deal with your device. And yes, this is for the Atrix 2.
I believe you will need to use SafeStrap developed by Hashcode to flash these Roms, as for we just build them from source, but do not have a valid device to physically test on.
These Roms are development Roms, as in stock [branch] compile from source. Feel free to use these Roms as a base for Custom Rom Development. We would love to see your work, or other's, on CrackFlasher.com.
http://www.crackflasher.com/forumdisplay.php?47-Atrix-2-Development
Thanks again, and feel free to become a member and join the community. It's a slow building one, but we all do have one thing in common. We're all CrackFlashers.
Have a good day.
Click to expand...
Click to collapse
Theres an A2 development forum now.. and theyve posted nightlies for aosp, aokp, CNA and CM10.
have you tried the aosp or aokp builds yet ??
EDit: rather, is it possible to get them to work in any way ?

anikadam said:
hey daavis, i had sent a mail asking whether this is in fact for the A2.. Got this reply..
Theres an A2 development forum now.. and theyve posted nightlies for aosp, aokp, CNA and CM10.
have you tried the aosp or aokp builds yet ??
Click to expand...
Click to collapse
I ran out of time and had to stop but I was close, I'm going to get in touch with them and give it another go when I get my kitchen back up and running (upgraded fedora after I messed with the cm10 build.).
The latest cm10 was the only one I tried....
I'll keep u guys updated with progress reports...
Also anyone that wants to help pm me I have time issues cause I'm really just a nerdy Finish carpenter lol
Sent from my MB865 using xda app-developers app

daavvis said:
I ran out of time and had to stop but I was close, I'm going to get in touch with them and give it another go when I get my kitchen back up and running (upgraded fedora after I messed with the cm10 build.).
The latest cm10 was the only one I tried....
I'll keep u guys updated with progress reports...
Also anyone that wants to help pm me I have time issues cause I'm really just a nerdy Finish carpenter lol
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
haha.. a talented nerdy carpenter i must say
yeah u got it to boot.. thats quite a good amount of progress.. id help out if i knew more and had some more time..
Good to see some more potential ROMs for our beloved A2... looking forward to your progress daavvis.. :good:

This post from hashcode is talking about the crackflash ROMs for the a2, in our safestrap thread in the dev section:
http://forum.xda-developers.com/showthread.php?p=34555169

jimbridgman said:
This post from hashcode is talking about the crackflash ROMs for the a2, in our safestrap thread in the dev section:
http://forum.xda-developers.com/showthread.php?p=34555169
Click to expand...
Click to collapse
I read that too.... a very good warning for everyone to follow, they DEF don't work.... I'm still gonna try when I'm bored tho, cause I get bored lol
Sent from my MB865 using xda app-developers app

jimbridgman said:
This post from hashcode is talking about the crackflash ROMs for the a2, in our safestrap thread in the dev section:
http://forum.xda-developers.com/showthread.php?p=34555169
Click to expand...
Click to collapse
Yeah i read it too.. i thought this was some new development in kexec for our phone and therefore the aosp and aokp ROMs, since they showed a november build.. but then it wasnt

Can someone actually can use this rom?
Sent from my ME865 using xda premium

sunnytse1 said:
Can someone actually can use this rom?
Sent from my ME865 using xda premium
Click to expand...
Click to collapse
no, not yet, these build are not ready for users. Someone set these up for auto-builds, that works with hashcode. Hashcode said that they do not work as of yet. I would not use these or even try unless you have some dev experience.

jimbridgman said:
no, not yet, these build are not ready for users. Someone set these up for auto-builds, that works with hashcode. Hashcode said that they do not work as of yet. I would not use these or even try unless you have some dev experience.
Click to expand...
Click to collapse
im about to give her another whack, after finally ( fedora 17 doesnt speak well with my video card, ubuntu [eh' i know noob build, but lets face it it runs nice and has tons of documentation] decided it didnt like my wireless card [ ok so it decided to fail installing the firmware and after hours explained to me what was wrong] ) getting my m1330 back together, and running effin wicked fast again, i need to know what files i need to play with to get my little cm build booting....
jim what would you expect was the culprit if she soft boots after building any cache? the log wont show anything through cm recovery, is there a log i can pull through adb or something that will bring a beacon of light to my daavviscm10build dreariness?

[DEV-ONLY] Android L Port

Hi guys,
First I must begin by saying that I am not a developer. However, using this: (http://forum.xda-developers.com/showthread.php?t=1908008) thread, I have managed to "port" Android L to the One, though I have no clue if it even boots. There are a few problems that need to be discussed:
1) AOSP ROMs are around 400 mb? This one is 900+ mb.
2) When I was zipping the ROM, I saw Prism.apk was also in it, and a heck lot of other HTC related things.
3) Will the current kernel for KitKat work smoothly on L?
Anyway, this is my first step to being a potential developer and hope you all get excited for this. I do have one request though, if I can get a few devs to work with me on this, we can get to new heights on our One.
You can download the zip I created here: https://drive.google.com/file/d/0B4JA1Kc3xlxiZUw2XzNzM1NKMVU/edit?usp=sharing
DISCLAIMER:
I AM NOT RESPONSIBLE IF YOUR DEVICE GETS BRICKED.
Thanks in advance,
the playa!

Can you attach the Build.prop file?

If you're going to post it at least try it yourself first man, this could brick everyone's device.
Sent from my HTC One using XDA Premium 4 mobile app

jukiewalsh said:
If you're going to post it at least try it yourself first man, this could brick everyone's device.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you miss the [Dev-Only] in the title? Every flash on your device could brick it if you aren't careful, nothing unique with this build. If you don't want to risk it, don't flash. Simple as that.

eaglerazor123 said:
Can you attach the Build.prop file?
Click to expand...
Click to collapse
Sure: https://drive.google.com/file/d/0B4JA1Kc3xlxiWHJOV1JnS3FCRzg/edit?usp=sharing
But as far as I remember, I did not do anything to it. The base ROM that I used was a stock deodexed Sense 6 ROM and the port ROM I used was the system dump from Android L, if that helps.

Snusdus said:
Did you miss the [Dev-Only] in the title? Every flash on your device could brick it if you aren't careful, nothing unique with this build. If you don't want to risk it, don't flash. Simple as that.
Click to expand...
Click to collapse
Okay fine, all I'm saying is there's already a thread on this in the general section so its almost pointless to post something else if it hasn't even been tested or is just like the other. There's already work being done on this...
Sent from my HTC One using XDA Premium 4 mobile app

jukiewalsh said:
Okay fine, all I'm saying is there's already a thread on this in the general section so its almost pointless to post something else if it hasn't even been tested or is just like the other. There's already work being done on this...
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Whoops. Seems like I missed that. Mods please close this thread then.
Sent from my HTC One using XDA Free mobile app

http://forum.xda-developers.com/showthread.php?t=2799195
That's the other thread
Sent from my HTC One using XDA Premium 4 mobile app
---------- Post added at 04:34 PM ---------- Previous post was at 04:31 PM ----------
Im not a dev just a general user but I don't think we should be creating these types of threads if you don't know what you're doing. Let the real devs do their work if it was as easy as following a copy/pasting port guide every device would already have a l build. Just be patient and eventually a nice dev will maybe make some magic happen for us.
Sent from my HTC One using XDA Premium 4 mobile app

the playa! said:
Sure: https://drive.google.com/file/d/0B4JA1Kc3xlxiWHJOV1JnS3FCRzg/edit?usp=sharing
But as far as I remember, I did not do anything to it. The base ROM that I used was a stock deodexed Sense 6 ROM and the port ROM I used was the system dump from Android L, if that helps.
Click to expand...
Click to collapse
This ROM will not work, period. The reason is because you did not follow step 1 of the guide which states quite clearly:
"Take any clean CM9, AOSP, CM7, CM10, CM11 ROM which is running on your device as Base ROM."
Now, don't know about you but I do not think a stock deodexed Sense 6 ROM counts as any of those mentioned in step 1... that is why you are seeing HTC things in the ROM.

Jonny said:
This ROM will not work, period. The reason is because you did not follow step 1 of the guide which states quite clearly:
"Take any clean CM9, AOSP, CM7, CM10, CM11 ROM which is running on your device as Base ROM."
Now, don't know about you but I do not think a stock deodexed Sense 6 ROM counts as any of those mentioned in step 1... that is why you are seeing HTC things in the ROM.
Click to expand...
Click to collapse
Ah. Thanks for pointing that out. I will update the zip file today.

the playa! said:
Ah. Thanks for pointing that out. I will update the zip file today.
Click to expand...
Click to collapse
It will not work just by using that guide; The bases are just too different.

the playa! said:
Ah. Thanks for pointing that out. I will update the zip file today.
Click to expand...
Click to collapse
no man, you can not do this because we have not a base for L! so it should be ported compiling source and fixing bug and issues...is not a thing that you find in a guide

estabien said:
I think your best bet would be to download the Nexus 5 sources and then do some "patchwork" with HTC One libs and whatnot, when needed. The good thing is that they are both at the same resolution and have similar specs.
And after you're done with that, you should be able to build with a couple of adjustments to various build-related things.
EDIT: Also, there will probably be issues with kernels? so you'll have to work through that also.
Click to expand...
Click to collapse
You can't be patching and copy/pasting libs. No zip modding when it comes to porting big base changes
You'll need to decompile and redo your ramdisk etc. And like jonny said you can't be using sense and gpe parts
Sent from my HTC One using XDA Premium 4 mobile app

Android L Keyboard in Play Store
I just wanted to note that there's a third-party application "Android L Keyboard" by Shen Le in the Play Store which I've been using on the latest CM11 nightlies that works great.
I understand that's not the point of this project but I just wanted to make sure other users are aware. Also, it's kind of scary to have to trust that a keyboard from the Play Store isn't logging and reporting your keystrokes but that's another issue entirely... anyways I added a screenshot, good luck with the project!
:good:

Thread has been closed at OP's request,
Many thanks,
Ghost