Having problems on flashing my lumia 710

Having problems on flashing my lumia 710 - General Topics

Hi all i have some problems during my phone re-flash...
I passed from the qualcomm bootload (cause i mounted a ROM), to the dload one with the hex edit but, after i've done this step, when i tried to reflash my lumia 710 with NCS (to change the bootload into the qualcomm one), NCS recognizes my lumia as a RM-809, but if i open my phone and i pull out the battery, the signature on the back says RM-803...
And there are no qualcomm bootload's roms for the RM-809; but i think that is impossible to flash my phone(wich is a RM-803) as a RM-809.
HOW CAN I SOLVE IT?
Sent from my Lumia 710 using Board Express

Related

Nokia Lumia 710 dload

Hi i need help to try and flash a custom rom to my lumia 710 whenever i try to enter dload windows wont load the driver and i get the double ding that is hardware failed in windows 7 please can someone point me to where i can download a driver

Maybe try posting this in the Lumia 710 section?
Oh, just noticed there isn't one I would say, disconnect and try again after a reboot of the phone and PC. Also, try updating it manually through device manager in Windows 7.

Lumia 710 info is in the Lumia 800 forum.

[Q] Lumia 820 qith Qualcomm MSM

Hi,
When i connect my phone by pressing power and volume up, i get into diagnostics mode and the driver comes up Qualcomm MSM Device. I've tried flashing but i feel maybe this is newer and is blocked from loading new firmware.
(flashing using care suite latest version)
Anyone else had issues with this?
I seem to recall the qualcomm bootloader on the lumia 800 was able to flash custom rom, could this be the case on this lumia 802?

nokia x hard brick

i have a Nokia x which i was trying to install the new update via the Stock Recovery after flashing the file i click reboot system now but my phone never turned on and i also tried to boot in twrp but still do not start up and not even charging and nokia care suite does not detects it but the pc detects it in the Device Manager/ports.
how do i fix my phone
thank you,

Lumia 1020 is on Windows 10 - Bootloader death & Recovery file signature failure

Hi,
I have been searching far and wide to try to restore my Lumia 1020 (RM-875 059T655 - Singapore CV Variant).
It was running Windows 10 Phone, with approximately 3 updates on the Windows 10 Slow Ring, where all of a sudden while I was using it, it hung/froze and restarted (screen briefly flashed) and now after the Nokia logo shows, the infamous "ERROR: Unable to find a bootable option. Press any key to shut down." displays upon attempt to boot.
I have tried from the Nokia Care Suite (even the ones predating the name, called Ovi Suite), to Lumia Device Recovery Tool, Windows Device Recovery Tool and of course WPInternals 1.2.
The hex method I tried also, returning the same error of "THOR2_ERROR_FA_SIGNATURE_FAIL", where WDRT says the same like the file isn't signed for the phone, etc. This is a Secure Boot thing, I know.
WDRT also says that the phone model is "unknown", so it's not liking Windows 10 being on it obviously.
WPInternals (as does WDRT) manages to switch the phone to the firmware loading stage (with the slightly larger Nokia logo). That's where WDRT mismatches the file Signature.
The problem is that to do the Secure Boot "thing", you need the version of windows that is on the phone (currently Windows 10).
WPInternals won't unlock the bootloader with the Windows 8(.1?) ffu from the selected variant. Error: "Try an FFU that matches the phone." when trying to flash with Unlock Bootloader method (even with engineering SBL3).
WPInternals does show the efuses blown (my guess is going to the Windows Insider preview blows this) and also manages to show some phone hex/hash IDs among other information.
Some more information or help would be appreciated.
Maybe someone has Windows 10 ffu(s)?
I'm not fussed which version of Windows I have, 8.1 or 10, so long as I can revive this phone again, as I still prefer it over Android. So much less hype in Australia!
All I really wanted to see was if I could try out 3CX on the windows phone TBH
Cheers

DEAD Lumia 1020 (RM-875) from failed flash (WPinternals v2.3 crashed mid flash)

Hi all,
I had hoped that my 1st post on here would be rather more positive than my current situation. Having refurbished my old Lumia 1020 for my son as his 1st mobile I decided to push my luck and try to install Windows 10. From looking at numerous guides it seemed that any failures should be recoverable via WDRT or WPinternals etc.
Unfortunately I killed my phone at the 1st stage :crying: (attempting to unlock the bootlocker using WPinternals v2.3), WPinternals v2.3 crashed mid flash. The phone, which was working perfectly beforehand now refuses to show any signs of life other than if I disconnect the battery and then plug in the charger I get a quick flash from the Windows button. I've tried the various methods for hard and soft resets but the phone fails to response, it is also not picked up by WDRT or WPinternals v2.3.
I'm confident the motherboard hasn't physically failed as it hadn't shown any signs of the eMMC issue where it gradually gets slower and slower before finally dying and returning the infamous "ERROR: Unable to find a bootable option" error. Assuming the hardware is okay, are there any further options I can try before letting a repair centre with JTAG facilities loose on it?
Thanks in advance for any suggestion/help etc.
EDIT - Trying to hard reset does generate a small sign of life in that periodically the Windows logo will illuminate for approximately 2 seconds whilst the volume down and power buttons are being pressed.

Send it to me, i need camera lens as mine is broken
I use latest win 10 on my lumia 1020.

Have you tried downloading the the ffu file and flashing it using the command prompt? see this link forum.xda-developers.com/showthread.php?t=2515453

Have you found a solution? I experienced the same issue and still didn't find a local service place to handle JTAG solution...i'm little stuck and i know the phone doesn't have any physical damage. I will try following the tutorial below...but not sure if it will work

1979Damian said:
Unfortunately I killed my phone at the 1st stage :crying: (attempting to unlock the bootlocker using WPinternals v2.3), WPinternals v2.3 crashed mid flash.
Click to expand...
Click to collapse
Hello!
Hope you still have your phone.
Don`t panic. Had the same situation yesterday.
When it was 30 seconds for ending unlock, WPinternals 2.4 just crashed. Twice (Tried this again after flashing orig FFU file).
WPinternals v2.3 and 2.4 don`t work correctly with WP 8.1 (as I understood).
verdugon said:
Have you found a solution?
Click to expand...
Click to collapse
How to recover phone:
1. Download WPinternals 1.2 here https://www.wpinternals.net/index.php/downloads.
2. Download original FFU file (firmware) from here http://www.lumiafirmware.com/ser/RM-875/guid/059T1G8.
3. Run WPinternals 1.2 and go to "Flash" section.
4. Scroll to "Flash original FFU" section.
5. Select the original FFU file, downloaded in step 2.
6. Flash it.
7. Then wait.
Worked for me. Maybe WPinternals v2.4 can flash correctly too, but don`t experiment with that.
To unlock bootloader on Lumia 1020 with WP8.1 you need WPinternals 1.2.
And this guide https://forum.xda-developers.com/windows-10-mobile/guide-unlock-lumia-x2x-enable-mass-t3369360.
Hope this post will help anybody.

Well i pass the other day from the service center and incredible, but they didn't even try to fix it...i hope they didn't steal anything from it. They didn't quote a mainboard replacement even!!! crazy. I've the phone back and i will try the "dmkovtun" suggestion. The condition is the same...phone looks dead and after cable connection window logo turns on briefy and then nothing. If this time try outs doesn't end well i guess the only solution for me here would be to do a MB replacement since i lack the tools for a JTAG intervention...
---------- Post added at 09:39 PM ---------- Previous post was at 09:38 PM ----------
jaspi72 said:
Send it to me, i need camera lens as mine is broken
I use latest win 10 on my lumia 1020.
Click to expand...
Click to collapse
In case i cannot restore it i would definetly consider to get the most of it. i will take it into account.

Recover your bricked Lumia 1020 (If it has signs of life)
If you're able to see signs of life "like partial Windows Logo" or even worst Blank (bricked) phone- Nothing on screen, no vibrations, etc. But you're able to hear USB connection sounds in PC when connecting.
Then this will work.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In my case, device was blank but I was able to see in Device Manager>Ports>QHS_USB_DLoad (COM19) when I connected my bricked Lumia 1020.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I guess you are already having Windows Device Recovery Tool (earlier called Windows Phone Recovery tool). If you've used it earlier..then I guess you might already have got Firmware Files.
You can find them by default at: "C:\ProgramData\Microsoft\Packages\Products\ or your custom download location.
Additionally, you need to download Emergency Files for your Lumia. It must be exactly for your Product Variant (or Model).
You can download Emergency Files from lumiafirmware.com/ (You can ask for help if confused there.)
Also, if you think you're not having Firmware files..then you can get them from that same website also. (Infact, on the very page of your Emergency files)
Place Emergency files (".mbn" and "".hex") you downloaded in same folder . (eg: under....\Products\RM-875\ALL FILES HERE)
---------------------------------------------------
Now, all you need to do is....launch WDRT and choose "My phone is not detected". You'll see RM-875_blah-blah..select and follow-up!
*****Make sure to charge your device for atleast 1-hour before attempting WDRT operations. Even if you can't see it charging.*****

1979Damian said:
Hi all,
I had hoped that my 1st post on here would be rather more positive than my current situation. Having refurbished my old Lumia 1020 for my son as his 1st mobile I decided to push my luck and try to install Windows 10. From looking at numerous guides it seemed that any failures should be recoverable via WDRT or WPinternals etc.
Unfortunately I killed my phone at the 1st stage :crying: (attempting to unlock the bootlocker using WPinternals v2.3), WPinternals v2.3 crashed mid flash. The phone, which was working perfectly beforehand now refuses to show any signs of life other than if I disconnect the battery and then plug in the charger I get a quick flash from the Windows button. I've tried the various methods for hard and soft resets but the phone fails to response, it is also not picked up by WDRT or WPinternals v2.3.
I'm confident the motherboard hasn't physically failed as it hadn't shown any signs of the eMMC issue where it gradually gets slower and slower before finally dying and returning the infamous "ERROR: Unable to find a bootable option" error. Assuming the hardware is okay, are there any further options I can try before letting a repair centre with JTAG facilities loose on it?
Thanks in advance for any suggestion/help etc.
EDIT - Trying to hard reset does generate a small sign of life in that periodically the Windows logo will illuminate for approximately 2 seconds whilst the volume down and power buttons are being pressed.
Click to expand...
Click to collapse
Thanks for posting this. You described exactly what I am experiencing on my Lumia 1020 (RM-877). My device was like this for several months and I gave up on it until recently when my Lumia 950XL appears to have died. I have tried Windows Device Recovery Tool (3.14) numerous times and for some reason it lists all sorts of other Lumias (including the Icon & 930) but there is no listing for the Lumia 1020 (RM875 or 877). I'll share what I've tried in this thread and hope you can find the fix for your device.
---------- Post added at 10:40 PM ---------- Previous post was at 10:27 PM ----------
jis.s said:
If you're able to see signs of life "like partial Windows Logo" or even worst Blank (bricked) phone- Nothing on screen, no vibrations, etc. But you're able to hear USB connection sounds in PC when connecting.
Then this will work.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In my case, device was blank but I was able to see in Device Manager>Ports>QHS_USB_DLoad (COM19) when I connected my bricked Lumia 1020.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I guess you are already having Windows Device Recovery Tool (earlier called Windows Phone Recovery tool). If you've used it earlier..then I guess you might already have got Firmware Files.
You can find them by default at: "C:\ProgramData\Microsoft\Packages\Products\ or your custom download location.
Additionally, you need to download Emergency Files for your Lumia. It must be exactly for your Product Variant (or Model).
You can download Emergency Files from lumiafirmware.com/ (You can ask for help if confused there.)
Also, if you think you're not having Firmware files..then you can get them from that same website also. (Infact, on the very page of your Emergency files)
Place Emergency files (".mbn" and "".hex") you downloaded in same folder . (eg: under....\Products\RM-875\ALL FILES HERE)
---------------------------------------------------
Now, all you need to do is....launch WDRT and choose "My phone is not detected". You'll see RM-875_blah-blah..select and follow-up!
*****Make sure to charge your device for atleast 1-hour before attempting WDRT operations. Even if you can't see it charging.*****
Click to expand...
Click to collapse
Thanks for sharing this. My device issues are identical to 1979damian. I've followed all the steps you provided including placing the necessary FFU, emergency and support files in c:\ProgramData\Microsoft\Packages\Products\rm877 folder.. When I run WDRT, the following occurs:
* My device wasn't detected
* I click on LUMIA
* A list of multiple Lumia devices appears from the 435, 1520, Icon & 930. No sign of Lumia 1020 (RM-875 or 877)
* I click on My device is not on the list
* I receive the message "The connected device cannot be recovered"
This occurs even after I have cleaned up the application logs,packages & report files or if I toggle between the "Care Suite Emergency Connectivity aka QHSUSBZ_DLOAD" or the "Qualcomm HS-USB QDLoader 9008 aka QualcommHS-USB QDLoader9008(COM10)" driver.
Would you have any thoughts on additional steps to fix this issue?

dmkovtun said:
Hello!
Hope you still have your phone.
Don`t panic. Had the same situation yesterday.
When it was 30 seconds for ending unlock, WPinternals 2.4 just crashed. Twice (Tried this again after flashing orig FFU file).
WPinternals v2.3 and 2.4 don`t work correctly with WP 8.1 (as I understood).
How to recover phone:
1. Download WPinternals 1.2 here https://www.wpinternals.net/index.php/downloads.
2. Download original FFU file (firmware) from here http://www.lumiafirmware.com/ser/RM-875/guid/059T1G8.
3. Run WPinternals 1.2 and go to "Flash" section.
4. Scroll to "Flash original FFU" section.
5. Select the original FFU file, downloaded in step 2.
6. Flash it.
7. Then wait.
Worked for me. Maybe WPinternals v2.4 can flash correctly too, but don`t experiment with that.
To unlock bootloader on Lumia 1020 with WP8.1 you need WPinternals 1.2.
And this guide https://forum.xda-developers.com/windows-10-mobile/guide-unlock-lumia-x2x-enable-mass-t3369360.
Hope this post will help anybody.
Click to expand...
Click to collapse
This post did it! Thanks @dmkovtun!
@1979Damian... Prior to running the above steps, I ran a boot restore pointing to the FFU file (RM877_3051.50009.1424.0000_RETAIL_nam_canada_234_00_442472_prd_signed.ffu for me) & the folder where the emergency flash loader was stored. Once the bootloader was restored, I had a red screen with a white Nokia logo. I was then able to run the steps that dmkovtun provided. My 1020 is now running updates. Good luck to you!

I have this problem
Afther use wpinternals software crashed and my lumia 1020 completely dead
Afther reboot phone via volume down+power and conect usb to pc nothing connection........
Only shot vibrale to phone and dark screen
Please help me i loved lumia 1020

Hamed_republic said:
I have this problem ?
Afther use wpinternals software crashed and my lumia 1020 completely dead?
Afther reboot phone via volume down+power and conect usb to pc nothing connection........
Only shot vibrale to phone and dark screen
Please help me i loved lumia 1020?
Click to expand...
Click to collapse
My device fixed via jtag tool

Hamed_republic said:
My device fixed via jtag tool
Click to expand...
Click to collapse
Please provide steps to do that I'm considering using jtag also
Enviado desde mi Redmi Note 4 mediante Tapatalk

verdugon said:
Please provide steps to do that I'm considering using jtag also
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
My phone completely was dead went to the boot repair store and they Rebuilt the boot with the hardware atf jtag tool BOX
Cost 40$

Hamed_republic said:
My phone completely was dead went to the boot repair store and they Rebuilt the boot with the hardware atf jtag tool BOX
Cost 40$
Click to expand...
Click to collapse
I tried that but in my country no one wanted to do that either because of lack of tools or non profit investment...so I have to do it.myself...still I would've paid for it's solution but I don't see option other than sending the phone to some one
Enviado desde mi Redmi Note 4 mediante Tapatalk

verdugon said:
I tried that but in my country no one wanted to do that either because of lack of tools or non profit investment...so I have to do it.myself...still I would've paid for it's solution but I don't see option other than sending the phone to some one
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
ATF jtag tools exist in most countries
you can search in mobile Repair store(or the stores that Substitute and repair emmc)
and asked Have an ATF jtag tool box?
i can share solution and boot file for repair your phone
you only need atf jtag hardware
lumia 1020 jtag file.zip

Hamed_republic said:
ATF jtag tools exist in most countries
you can search in mobile Repair store(or the stores that Substitute and repair emmc)
and asked Have an ATF jtag tool box?
i can share solution and boot file for repair your phone
you only need atf jtag hardware
lumia 1020 jtag file.zip
Click to expand...
Click to collapse
Thx for the reply and help.
Let me see if I can find a hardware solution. In the mean time perhaps you can point me out someone able to receive the MB (board) in order to apply the "treatment".
I remember a Samsung innov8 I had and I start playing with and ended up sending it for repair after a bad flash to Ukraine...and returned flawlessly...so that's what I considering at this time knowing that locally no one has the hardware tools and time to.do.what I need.
Enviado desde mi Redmi Note 4 mediante Tapatalk

verdugon said:
Thx for the reply and help.
Let me see if I can find a hardware solution. In the mean time perhaps you can point me out someone able to receive the MB (board) in order to apply the "treatment".
I remember a Samsung innov8 I had and I start playing with and ended up sending it for repair after a bad flash to Ukraine...and returned flawlessly...so that's what I considering at this time knowing that locally no one has the hardware tools and time to.do.what I need.
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
Do you see anything when you connect the phone to a computer in device manager?
hold volume down +power butoon 10 secend

Hamed_republic said:
Do you see anything when you connect the phone to a computer in device manager?
hold volume down +power butoon 10 secend
Click to expand...
Click to collapse
Yes it appears as HID device....I remember I read about that but found a dead end. according to the ID in devices manager meant about discharged battery or broken bootloader. mines seems to be option 1. Besides that if you plug the charger...win logo blinks a few seconds and then nothing.
Enviado desde mi Redmi Note 4 mediante Tapatalk

verdugon said:
Yes it appears as HID device....I remember I read about that but found a dead end. according to the ID in devices manager meant about discharged battery or broken bootloader. mines seems to be option 1. Besides that if you plug the charger...win logo blinks a few seconds and then nothing.
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
If the device detects QHSUB_DLOAD in the device manager after cnonect to pc it is good
try use this metod
UNDBRICKED LUMIA PHONES [NO JTAG] [Only for QHSUSB_DLOAD lumia (black screen, no vibration)]
http://ronhks.hu/2016/02/28/fix-your-hardbricked-lumia-phones-no-jtag-only-for-qhsusb_dload-lumia-black-screen-no-vibration/
or
translated by google orginal languege persian
https://translate.google.com/translate?sl=fa&tl=en&u=http%3A%2F%2Fwinphone.ir%2Funbrick-lumia-phones-without-using-jtag%2F

Database Info

welcome