Hi i need help to try and flash a custom rom to my lumia 710 whenever i try to enter dload windows wont load the driver and i get the double ding that is hardware failed in windows 7 please can someone point me to where i can download a driver
Maybe try posting this in the Lumia 710 section?
Oh, just noticed there isn't one I would say, disconnect and try again after a reboot of the phone and PC. Also, try updating it manually through device manager in Windows 7.
Lumia 710 info is in the Lumia 800 forum.
Related
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
Download and install Windows mobile device center
ducbinh.vn said:
Download and install Windows mobile device center
Click to expand...
Click to collapse
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
CAPHI said:
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
Click to expand...
Click to collapse
When i used xp mode i found that in order to have a successful flash you must hard reset your phone before you flash, mount the device with the RUU running from the desktop, and once the RUU begins you must remount your device once it gos into the boot screen(it shows up as unidentified...but its the one highest up in the list)then your device will do its thing and then you magically have a new ROM! Hope this helps, and yes obviously Windows XP is a better solution but the thread is updating a ROM on Windows 7...
OK, i got it... im downgrading my PC to Windows XP SP3...
Thanks guys
no need to downgrade OS, use vmware to install XP inside it
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
hi download windows mobile device center 6.1 from ms i have it much better then active syn no need to load xp or anything so the member thats said its incorrect is wrong
grtz cyber weesje
BASSMANBOB said:
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Click to expand...
Click to collapse
he is right your incorrect windows mobile device center 6.1 no need to downgrade or load the xp virtual unit for that i use it daily and many ohters active syn is old ms even stopt working on it
grtz weesje
tljubas said:
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
Click to expand...
Click to collapse
When your Wizard is starting up, there comes a screen with in the left up corner some info like CID etc. When your Wizard is CID unlocked, then there behind CID x.xx.olip.
I know that it works with a g4 version of the wizard. Look around for more info
Edit: This is only when you succesfully installed Hardspl
I just flashed a rom on my p3300 yesterday and I did it on Windows 7 ultimate.. For me it was working just like that..
Today I will try my fathers Wizard on it
**edit**
No luck on Windows 7 installing WM6.5 on the wizard..
I installed XP on VMware and that worked for me..
Used activesync 4.5 on it.. Installed the CR96 WM6.5 of Cracing
Works like a charm!!
So yeah... Install VMware, that will be the best way to flash your Wizard.
Holla!
Hi all i have some problems during my phone re-flash...
I passed from the qualcomm bootload (cause i mounted a ROM), to the dload one with the hex edit but, after i've done this step, when i tried to reflash my lumia 710 with NCS (to change the bootload into the qualcomm one), NCS recognizes my lumia as a RM-809, but if i open my phone and i pull out the battery, the signature on the back says RM-803...
And there are no qualcomm bootload's roms for the RM-809; but i think that is impossible to flash my phone(wich is a RM-803) as a RM-809.
HOW CAN I SOLVE IT?
Sent from my Lumia 710 using Board Express
Dear sir,
Im using nokia lumia 710 ,os ver 7.8 .Now my phone lockscreen does not work properly,i mean ,.when i lock the phone screen by lock button the screen not responding and some times it blinks (lock screen) more than 2 times,some times it asking for "Slide to switch off " .when i slide this, my phone turned off and again it will be automatically on.It never off it will automatically on after few seconds.,and also my phone lockscreen still not work properly ,but all of the functions of my phone is good not any problem expect this.I tried hard and soft reset but not useful still now the problem is continues .
And also i checked my phone by connecting it to my laptop (dell win8) .And i went through the "device and printers"section ,and i clicked my phone nokia lumia 710 it shows 1) "RM-803 driver was not installed", 2)"RM-803 driver was not installed" 3)"USB driver installed" .....what can i do now??? The" update" button was disable.Only "ok" button was visible .what can i do now .Ok button exit the section, i mean it goes back to nokia lumia 710 section which i came before...So please tell me bro what can i do now??? Please dont tell me that go to nokia care..I want solve this problem by myself....Please any of them tell me..I m waiting for ur solution.....
Thank u.
rockey rky said:
Dear sir,
Im using nokia lumia 710 ,os ver 7.8 .Now my phone lockscreen does not work properly,i mean ,.when i lock the phone screen by lock button the screen not responding and some times it blinks (lock screen) more than 2 times,some times it asking for "Slide to switch off " .when i slide this, my phone turned off and again it will be automatically on.It never off it will automatically on after few seconds.,and also my phone lockscreen still not work properly ,but all of the functions of my phone is good not any problem expect this.I tried hard and soft reset but not useful still now the problem is continues .
And also i checked my phone by connecting it to my laptop (dell win8) .And i went through the "device and printers"section ,and i clicked my phone nokia lumia 710 it 1) "RM-803 driver was not installed", 2)"RM-803 driver was not installed" 3)"USB driver installed" .....what can i do now??? The" update" button was disable.Only "ok" button was visible .what can i do now .Ok button exit the section, i mean it goes back to nokia lumia 710 section which i came before...So please tell me bro what can i do now??? Please dont tell me that go to nokia care..I want solve this problem by myself....Please any of them tell me..I m waiting for ur solution.....
Thank u.
Click to expand...
Click to collapse
I have a Nokia lumia 710 also on 7.8, if you go to settings.. About.. Their is a option to reset the phone this would reset it to factory settings, make sure that all you data is backed up just in case, after the phone is reset you should be able to plug in to computer and it will begin to instal the drivers I think
Or if you hold the volume up then plug in the usb it will install the driver, if you get format device always click cancel as clicking ok would be brick your device, hope I helped
bernarduk09 said:
I have a Nokia lumia 710 also on 7.8, if you go to settings.. About.. Their is a option to reset the phone this would reset it to factory settings, make sure that all you data is backed up just in case, after the phone is reset you should be able to plug in to computer and it will begin to instal the drivers I think
Or if you hold the volume up then plug in the usb it will install the driver, if you get format device always click cancel as clicking ok would be brick your device, hope I helped
Click to expand...
Click to collapse
Thank you sir,
Before this, i did this....I connected the phone to my pc like you said,and i went through the 'device and printers' in Control Panel. I checked my phone by doing troubleshoot .And it shows "nokia dload does not have a driver" .What can i do now??? Even i cnt update the driver.It only appears by 30 seconds after it will be became disappear .And normally shows my device nokia lumia 710 with the same problem ( I told in previous post) .If i reset my phone it will solve my all problem?
rockey rky said:
Thank you sir,
Before this, i did this....I connected the phone to my pc like you said,and i went through the 'device and printers' in Control Panel. I checked my phone by doing troubleshoot .And it shows "nokia dload does not have a driver" .What can i do now??? Even i cnt update the driver.It only appears by 30 seconds after it will be became disappear .And normally shows my device nokia lumia 710 with the same problem ( I told in previous post) .If i reset my phone it will solve my all problem?
Click to expand...
Click to collapse
I'm waiting for your reply................
i have problem with my bosses nokia 710 after instaling whatsapp i simply turned off than on and again off and on its all that is does pls tell me wath to do
thank you
I have a Lumia 520(RM-914 Indian version) with windows 8.1 developer preview. I wanted to install Lumia cyan upgrade so i used nokia software recovery tool to download the firmware version 3058.50000.1425.0001. The installation started and it showed an error at 1%. It showed an option to recover and i tried it but it couldn't. Now the phone is bricked and when connected to pc, it is shown as QHSUSB_DLOAD device.
In Nokia Care Suite PST it is shown as USB: Product in flash mode with Data package selection failed and product code reading failed error.
When I select Open Product, select the device and select data package, it tells me to hold Down+ Power button until it vibrates and then retry. When I try that there is no vibration just i could see that the usb disconnects and connects again.
Is there no way to recover it in my home using my pc and usb cable? My warranty has been void as I had replaced my broken screen earlier outside the Nokia Care.
HI,
Seeing your device listed as QHSUSB_DLOAD is usually a very bad sign I'm afraid.
Please ask for help here and hopefully someone who knows your device well can help sort it out,
>Windows Phone 8 Development and Hacking>Windows Phone 8 Q&A, Help & Troubleshooting
Good luck! Hope you fix it!
Hi,
I have been searching far and wide to try to restore my Lumia 1020 (RM-875 059T655 - Singapore CV Variant).
It was running Windows 10 Phone, with approximately 3 updates on the Windows 10 Slow Ring, where all of a sudden while I was using it, it hung/froze and restarted (screen briefly flashed) and now after the Nokia logo shows, the infamous "ERROR: Unable to find a bootable option. Press any key to shut down." displays upon attempt to boot.
I have tried from the Nokia Care Suite (even the ones predating the name, called Ovi Suite), to Lumia Device Recovery Tool, Windows Device Recovery Tool and of course WPInternals 1.2.
The hex method I tried also, returning the same error of "THOR2_ERROR_FA_SIGNATURE_FAIL", where WDRT says the same like the file isn't signed for the phone, etc. This is a Secure Boot thing, I know.
WDRT also says that the phone model is "unknown", so it's not liking Windows 10 being on it obviously.
WPInternals (as does WDRT) manages to switch the phone to the firmware loading stage (with the slightly larger Nokia logo). That's where WDRT mismatches the file Signature.
The problem is that to do the Secure Boot "thing", you need the version of windows that is on the phone (currently Windows 10).
WPInternals won't unlock the bootloader with the Windows 8(.1?) ffu from the selected variant. Error: "Try an FFU that matches the phone." when trying to flash with Unlock Bootloader method (even with engineering SBL3).
WPInternals does show the efuses blown (my guess is going to the Windows Insider preview blows this) and also manages to show some phone hex/hash IDs among other information.
Some more information or help would be appreciated.
Maybe someone has Windows 10 ffu(s)?
I'm not fussed which version of Windows I have, 8.1 or 10, so long as I can revive this phone again, as I still prefer it over Android. So much less hype in Australia!
All I really wanted to see was if I could try out 3CX on the windows phone TBH
Cheers