Hi
I have installed the JB version of TWRP 2.5.0.0 Touch Recovery! via fastboot. Before that, I had the latest Asus 4.2.1 rom installed.
Now it boots into TWRP but it can't mount anything.
Please help. Thank you very much.
ducmac said:
Hi
I have installed the JB version of TWRP 2.5.0.0 Touch Recovery! via fastboot. Before that, I had the latest Asus 4.2.1 rom installed.
Now it boots into TWRP but it can't mount anything.
Please help. Thank you very much.
Click to expand...
Click to collapse
Sounds like you flashed the incorrect twrp... AFAIK there is no fix for this. You should have actually read first.
You can try this fix http://forum.xda-developers.com/showthread.php?t=2254553
Sent from my Nexus 7 using xda app-developers app
Sh... true. Well actually I did read first. A lot. I flashed the TG version to a T tablet. Hmm no fix?
Many thanks.
markymark567 said:
Sounds like you flashed the incorrect twrp... AFAIK there is no fix for this. You should have actually read first.
You can try this fix http://forum.xda-developers.com/showthread.php?t=2254553
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
ducmac said:
Sh... true. Well actually I did read first. A lot. I flashed the TG version to a T tablet. Hmm no fix?
Many thanks.
Click to expand...
Click to collapse
Well you somehow missed this http://forum.xda-developers.com/showthread.php?t=2206566 which is pretty hard to miss considering its stickied... Anyways I have not heard of anyone being able to fix this but I've been wrong before... Good luck!! Sorry I can't be more help than that....
Sent from my Nexus 7 using xda app-developers app
Well but actually I have flashed a 4.2.1 version for my 4.2.1 bootloader. Only that it was the FT300TG version instead of the FT300T version. Still no fix?
ducmac said:
Well but actually I have flashed a 4.2.1 version for my 4.2.1 bootloader. Only that it was the FT300TG version instead of the FT300T version. Still no fix?
Click to expand...
Click to collapse
Hmmm interesting... Well have you even tried to flash a new recovery?? I haven't heard of anyone flashing the tg version on a t but theoretically you should be able to just overwrite it.. But I assume you've already tried this (I hope)..
Sent from my Nexus 7 using xda app-developers app
ducmac said:
Well but actually I have flashed a 4.2.1 version for my 4.2.1 bootloader. Only that it was the FT300TG version instead of the FT300T version. Still no fix?
Click to expand...
Click to collapse
That's not what you said in the OP. In the OP, you said you had the 4.2 bootloader and flashed a -JB recovery. The -JB recoveries are for the 4.1 bootloader. Your brick doesn't have as much to do with the T vs. TG mixup as it did with you missing the sticky thread that the warned against flashing -JB recoveries with the 4.2 bootloader.
Related
Here's a stock rooted clockworkmod update for 8.4.4.11 US users who want to upgrade to HC3.2 8.6.5.6
http://kan.gd/uyg
This is not for users of custom roms. STOCK only.
Roach2010 said:
Here's a rooted clockworkmod update for 8.4.4.11 US users who want to upgrade to HC3.2 8.6.5.6
http://kan.gd/uyg
Click to expand...
Click to collapse
Thanks so we could still keep your Prime 1.6 with this?
dazz87 said:
Thanks so we could still keep your Prime 1.6 with this?
Click to expand...
Click to collapse
No, this is for STOCK with root only
Awsome work again Roach2010. Thank you
That doesn't make sense to me. If its for rooted tf's, it shouldn't matter what rom you are running.
No? I'm no expert though.
Roach2010 said:
Here's a stock rooted clockworkmod update for 8.4.4.11 US users who want to upgrade to HC3.2 8.6.5.6
http://kan.gd/uyg
This is not for users of custom roms. STOCK only.
Click to expand...
Click to collapse
So is this 8.4.4.11 rooted or HC 3.2 rooted?
The title of the tread and ^^^^ got me confused....
Sent from my Transformer TF101 using XDA Premium App
slopokdave said:
That doesn't make sense to me. If its for rooted tf's, it shouldn't matter what rom you are running.
No? I'm no expert though.
Click to expand...
Click to collapse
It's patches rather than a full rom so it can only be successfully be applied over 8.4.4.11 stock.
DKM119 said:
So is this 8.4.4.11 rooted or HC 3.2 rooted?
The title of the tread and ^^^^ got me confused....
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Sorry, It upgrades stock 8.4.4.11 to 8.6.5.6 (3.2) and adds/keeps root. It also needs to be flashed with CWM recovery.
Roach2010 said:
Sorry, It upgrades stock 8.4.4.11 to 8.6.5.6 (3.2) and adds/keeps root. It also needs to be flashed with CWM recovery.
Click to expand...
Click to collapse
That didn't take long... Amazing work Roach, thank you!
Once someone applies this to a stock ROM, can't they remove all the patch files from the zip, copy the files from their 3.2 ROM into the zip, and update the updater-script to remove the patching instructions/replace with copy instructions? That would essentially give us a zip file that could update any version to 3.2, no?
Yeah this didn't work for me...it fails to install and got a message about tegra zone....
Sent from my Transformer TF101 using XDA Premium App
didn't work for me either, got error for kindle-oem.apk i removed kindle before and wheni put it back in still getting the same error, pls fix this can't wait to get to 3.2 lol
So this flashes 3.2? If I have Prime 1.6 now, and flash this, I'll have Stock 3.2?
SwiftLegend said:
So this flashes 3.2? If I have Prime 1.6 now, and flash this, I'll have Stock 3.2?
Click to expand...
Click to collapse
This is for stock rooted roms.
Read the first post.
Reading is fundamental.
Sent from my HTC Vision using XDA Premium App
david279 said:
This is for stock rooted roms.
Read the first post.
Reading is fundamental.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
I was confused.
Being a dickhead isn't fundamental.
Thanks Roach! Trying this now....Seems to be installing just fine atm.
Any idea when you'll have Prime updated for this? Can't wait for it.
Thanks again! I'd buy you a beer if my kid didn't cost so much.
EDIT: Flashing it in CWM worked just fine....taking a while to boot, but whatever. I'm sure it's all fine....
EDIT2: Just cause I'm wondering, should we be flushing our cache and data and such in CWM before rebooting? Just wondering.....
And just booted into 3.2. Works great!
SwiftLegend said:
I was confused.
Being a dickhead isn't fundamental.
Click to expand...
Click to collapse
It's a rite of passage, lol. Serioulsy though, he's right. It clearly states you've got to be on a STOCK Rom. You stated you were on 1.6 Prime, so there was no reason for you to think it would work directly without flashing back to stock. =\
It's meant to be flashed on top of Super's Stock Root Repack ROMs for example
dictionary said:
It's a rite of passage, lol. Serioulsy though, he's right. It clearly states you've got to be on a STOCK Rom. You stated you were on 1.6 Prime, so there was no reason for you to think it would work directly without flashing back to stock. =\
Click to expand...
Click to collapse
No actually, it only clearly states that you have to be on 8.4.4.11.
Sent from my PG86100 using Tapatalk
donatom3 said:
No actually, it only clearly states that you have to be on 8.4.4.11.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Title has been updated since you last looked. Now reflects "STOCK"
Hi,
I was wondering how to root my Asus tf300t WW (build number JRO03C.WW_epad-10.4.2.13-20120907), Android 4.1.1? All those that I found was on with US type firmware.
Cheers..
Tamaskan said:
Hi,
I was wondering how to root my Asus tf300t WW (build number JRO03C.WW_epad-10.4.2.13-20120907), Android 4.1.1? All those that I found was on with US type firmware.
Cheers..
Click to expand...
Click to collapse
I am in the same dilemma, I am using the TW build.
But I decided to unlocked the bootloader first. The APK for ICS works fine for JB.
lenrek said:
I am in the same dilemma, I am using the TW build.
But I decided to unlocked the bootloader first. The APK for ICS works fine for JB.
Click to expand...
Click to collapse
Haha, but i found this but it is US version and I dont know if it will work and I am not willing to risk my tab haha
http://forum.xda-developers.com/showthread.php?t=1845377&fb_source=message
Tamaskan said:
Haha, but i found this but it is US version and I dont know if it will work and I am not willing to risk my tab haha
http://forum.xda-developers.com/showthread.php?t=1845377&fb_source=message
Click to expand...
Click to collapse
Ya... Is essentially the same steps as I found. I have manage to unlock. Will try to flash recovery and root later. Wish me luck... :fingers-crossed:
What I have understood so far, the steps are affecting the recovery and install su into the /system partition (no wipe). It does not affect the kernel nor Android itself. So, technically, it should be generic for all build.
lenrek said:
Ya... Is essentially the same steps as I found. I have manage to unlock. Will try to flash recovery and root later. Wish me luck... :fingers-crossed:
What I have understood so far, the steps are affecting the recovery and install su into the /system partition (no wipe). It does not affect the kernel nor Android itself. So, technically, it should be generic for all build.
Click to expand...
Click to collapse
owh, so have u tried it? did it work?
Yes! It works!
Sent from my GT-N7000 using xda app-developers app
lenrek said:
Yes! It works!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
hmm i guess we they can close this topic now, knowing that we can root using those steps.
lenrek said:
Yes! It works!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Ok, I'm glad for you
But it will be better to explain how you have root your tf300 with this process.
Could you explain for other users.
Thanks
philos64 said:
Ok, I'm glad for you
But it will be better to explain how you have root your tf300 with this process.
Could you explain for other users.
Thanks
Click to expand...
Click to collapse
Mine TW build.
You can read about it here:
http://forum.xda-developers.com/showthread.php?t=1921229
lenrek said:
Mine TW build.
You can read about it here:
http://forum.xda-developers.com/showthread.php?t=1921229
Click to expand...
Click to collapse
Yes I can, but it was not for me if I have write this:
But it will be better to explain how you have root your tf300 with this process.
Could you explain for other users.
Click to expand...
Click to collapse
It's for the others members, not for me, If you have seen my sig
But still thanks
So my tablet is currently on the 10.4.2.17 firmware for the bootloader. I need to upgrade it to the latest. How would one go about doing that without flashing back to stock? I am currently on CM 10.1. Is there a way to only flash the bootloader to the tablet?
Well I flashed back to stock to upgrade. Oh well, haha
JBass said:
So my tablet is currently on the 10.4.2.17 firmware for the bootloader. I need to upgrade it to the latest. How would one go about doing that without flashing back to stock? I am currently on CM 10.1. Is there a way to only flash the bootloader to the tablet?
Click to expand...
Click to collapse
I think it was mentioned in the cm10.1 thread that flashing back to stock is the only way
Sent from my XT890 using xda premium
Correct, there was however a bootloader update that was standalone but it was an old version.
batwingnz said:
I think it was mentioned in the cm10.1 thread that flashing back to stock is the only way
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
I'm currently running Hyperdrive RLS 16 and want to know if it is possible to go to [Rom][d2vzw][Official][Kitkat - 4.4.2] - Gummy - Nightly's?
Do I just need to follow the instructions or is there more files I need to change within the phone? Basically, I want to know if it will be a simple transition.
Thank You!
:crying:
You should be just fine. Just install like any other ROMs. Don't forget to wipe Data. Make sure you update your recovery to the latest version first BEFORE FLASHING since gummy is Kitkat. This is very important.
Sent from my SCH-I535 using Tapatalk
Cool thanks a ton!
GlitchMob said:
Cool thanks a ton!
Click to expand...
Click to collapse
There are so many people saying different things. Im on 2.4.4.0 is that okay?
GlitchMob said:
There are so many people saying different things. Im on 2.4.4.0 is that okay?
Click to expand...
Click to collapse
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
GlitchMob said:
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
Click to expand...
Click to collapse
I'm mistaken...badly. You need to be on TWRP 2.6.3.1 in order to flash any KitKat rom. That's what I'm on. KitKat roms will not flash on anything before TWRP 2.6.3.1.
Sent from my SCH-I535 using Tapatalk 4
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
What about CWM can i use that and if so which ver.?
razorr69 said:
What about CWM can i use that and if so which ver.?
Click to expand...
Click to collapse
Yes, the latest is up on the Rom Manager website.
Sent from my SCH-I535 using Tapatalk 4
Funny I had the same question..
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
cjmcsw87 said:
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
Click to expand...
Click to collapse
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Ok cool thanks snoop, as always you da man ! I'm still on MB1 so I kind of thought so. I Guess I'll give it a whirl after a few and post my results (from philZ)
GlitchMob said:
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Click to expand...
Click to collapse
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
david_hume said:
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
Click to expand...
Click to collapse
That kind of sucks. I'll probably just stick with the most current nightly till they come out with an official one.
Thanks for the response.
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
razorr69 said:
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
Click to expand...
Click to collapse
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thats what i thought but wasn't %100 sure because mine is VRLHE. Should i flash it anyway to M1 modem only will i get better speeds and is the radio better. Eventually im going to flash 4.3 or 4.4 just waiting for a daily driver.
I'm trying to flash the latest nightly Omni KK 4.4.4 ROM onto my N8010 using TWRP recovery but keep getting a Fail. Can anyone offer a reason and a possible resolution to this?
Thanks
schrodinger56 said:
I'm trying to flash the latest nightly Omni KK 4.4.4 ROM onto my N8010 using TWRP recovery but keep getting a Fail. Can anyone offer a reason and a possible resolution to this?
Thanks
Click to expand...
Click to collapse
Are you using a newer version of TWRP 2.7+?
electrikjesus said:
Are you using a newer version of TWRP 2.7+?
Click to expand...
Click to collapse
Yes. v 2.7.1.0
schrodinger56 said:
Yes. v 2.7.1.0
Click to expand...
Click to collapse
Don't know what the issue could be. Was there any info in the log?
I'm sorry I don't know what that means.
What does TWRP say when it fails?
electrikjesus said:
What does TWRP say when it fails?
Click to expand...
Click to collapse
After I swipe to flash the ROM it comes up FAILED in red.
Sounds like a corrupted download.
Sent from my GT-N7105 using XDA Premium 4 mobile app