I have the latest unofficial cm-10 on my Burst. Overall it's great but I am having trouble with Att Lte network. I followed the instructions on the cm-10 porting thread to enable Lte but when phone connects to Lte I have no data. Phone calls work on Lte but no data. Has anyone encountered this problem and found a solution?
AT&T 4G LTE setup
Okay here's what I found out about using 4G LTE on the AT&T network. First of all 4G LTE is not enabled on cm 10 with default settings. You'll have to open settings menu/ wireless and networks/ more/ mobile networks/ Access Point names/ and then check the box for AT&T LTE. Then click back one page and open network selection. Choose GSM WCDMA automatic. Then open menu/ system/ notification drawer/ widgets buttons and enable LTE widget button. Now go to your widget buttons and enable LTE. Now check signal status bar. It should change to 4G if you in a 4G LTE area.You should now be able to use 4G LTE.
I am using it on T-Mobile and I have the same problem that it will not enable 4G LTE. I will check tomorrow when I am @ 4G LTE area.
jellybean59 said:
Okay here's what I found out about using 4G LTE on the AT&T network. First of all 4G LTE is not enabled on cm 10 with default settings. You'll have to open settings menu/ wireless and networks/ more/ mobile networks/ Access Point names/ and then check the box for AT&T LTE. Then click back one page and open network selection. Choose GSM WCDMA automatic. Then open menu/ system/ notification drawer/ widgets buttons and enable LTE widget button. Now go to your widget buttons and enable LTE. Now check signal status bar. It should change to 4G if you in a 4G LTE area.You should now be able to use 4G LTE.
Click to expand...
Click to collapse
It is not working for T-mobile 4G LTE. It seem like it disables. Is there any software or radio tweak to get it work?
whylessfone said:
I am using it on T-Mobile and I have the same problem that it will not enable 4G LTE. I will check tomorrow when I am @ 4G LTE area.
Click to expand...
Click to collapse
I have a question...in the information of the device appears only 795mb of ram after flash cm10...why? thanks
How to connect Pantech Burst/CM10 to 4G/LTE
whylessfone said:
It is not working for T-mobile 4G LTE. It seem like it disables. Is there any software or radio tweak to get it work?
Click to expand...
Click to collapse
Sorry if this is too late ... I just saw this thread ....
I made it work for me as follows:
Settings -> More -> Mobile Networks -> Access Point Names -> Some-APN-Name
Touch the APN that is displayed, and type in a new name for network: fast.t-mobile.com
Go back one page and Select Network Operators
This will take a while to display
Select T-Mobile/LTE
It should register your phone with 4G/LTE
Cheers!!!
JD
---------- Post added at 06:12 AM ---------- Previous post was at 06:03 AM ----------
I need to install latest CM on Pantech Burst.
My unlocked Burst is not with AT&T. It is with T-Mobile.
It is NOT rooted.
I have not been able to root it.
So, How do I install latest unofficial CM on it?
I do not even know where to download it from.
Thanx for any info.
Related
How to Fix AT&T Data Throttle Your 4G - Your Data Usage is Among The Top 5% Of Users
There is a nice little APN fix. Just change the APN to Phone and force your phone to use HSPA in your phone's settings. I have instructions with a screenshot...
http://www.traemcneely.com/2011/12/...rottle-4g-data-anti-throttling-trick-for-att/
How do you perform the first step on the skyrocket?
1. Go to Settings > Wireless and Network > Mobile Networks > Click Network Mode and force your phone to use GSM/HSPA (Auto mode).
I don't see "network mode".
Click Access Point Name..
I am now getting 512k vs 150k.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Found another trick.
I named the access point the same ATT pta, then I put Phone under the APN setting.
Put your phone into GSM/HSPA (auto mode) let it connect to the network,
then go back and put it as HSPA only.....I'm getting 1-2g+ bypassing the throttle using HSPA+ works like a charm.
Att Throttle Samsung Skyrocket
i did all when i click on Mobile networks i see access point names and network operators and use packet data. When i click on network operators is says Default setup doesnt allow me to do anything. Please help
Same here. Don't see 'network.mode' selection. Please help. Does it have to be rooted?
Sent from my SAMSUNG-SGH-I727 using XDA App
I understand there are alot of threds pertaing to this throttling issue. I was given a warning text from att about a week ago now when ever i run my speed test i am only getting around 50kbs thats crazy. I live in pittsburgh which is not an LTE area yet am i screwed? or is there a work around for me????????
there is no network mode on a stock rom.. i posted workarounds on another thread which I started but can't find link now on my phone.. check my profile for my posts
Sent from my SAMSUNG-SGH-I727 using xda premium
*#*#4635#*#*
ajdrausal said:
*#*#4635#*#*
Click to expand...
Click to collapse
*#*#4636#*#*
---------- Post added at 11:36 PM ---------- Previous post was at 11:17 PM ----------
I am still not sure where/how to pick "GSM/HSPA (Auto mode)" on stock rom. Thats not an option.
What I have are:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
(Cut n paste from another thread, dont know if these are applicable to Skyrocket/LTE)
http://forum.xda-developers.com/showthread.php?t=1342111
Thanks for the pointer to the thread but my whole point is that I dont see those options and for some reason my network mode changes dont stick.
So if I disable packet network, switch the APN, change the network mode and then enable the network again, I see that it has gone back to GSM?WCDMA/LTE auto mode again.
So for some reason my network mode changes dont stick. Also, I am on stock rom, could that be the reason!
activemind said:
Thanks for the pointer to the thread but my whole point is that I dont see those options and for some reason my network mode changes dont stick.
So if I disable packet network, switch the APN, change the network mode and then enable the network again, I see that it has gone back to GSM?WCDMA/LTE auto mode again.
So for some reason my network mode changes dont stick. Also, I am on stock rom, could that be the reason!
Click to expand...
Click to collapse
Custom ROMS give you the options you are looking for.
I am confused ! If the stock radio is *locked* to use LTE if available, why are some people reporting to lock onto HSPA+ network with stock ROM. Are they exploiting some bug?
I have tried various things but I cant switch my radio to anything except GSM/WCDMA/LTE auto mode. It seems to come back to that mode.
Do I need a reboot after changing the mode.
I am using *#*4636#*#* to switch the mode.
Switching APN 's worked like a charm ;o)
TE TOQUE said:
Switching APN 's worked like a charm ;o)
Click to expand...
Click to collapse
Over a year since last post and you decide to necro for no good reason smh.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Hello,
I recently bought a At&t HTX one X. It has a Unlocked Bootloader and i have also unlocked it so that i can use it with other Service Providers. But i found out that the 4g is always on and when i go into the network setting, the option Data Roaming is disabled.
I am loosing a lot of money because of this.
Under the mobile Network Settings i can only see 3 options .
1. Data Roaming [This option is disabled]
2. Access Point Names
3.Network operators
Can somebody please help me with finding a solution to get 4g disabled?
Thanks in advance
Go to dialer and dial *#*#4636#*#*. Go to phone information, and pick wcdma preferred.
Sent from my One XL
ok cool.. now i see 4 options
1. Phone information
2. Battery information
3. Usage statistics
4. Wifi information
I went to phone information : - set the preferred network type as GSM only
Now i can see the 4g symbol disabled... great
But now i see the "E" symbol on.
How do i get rid of that ?
"GSM only" is this the right option i selected ?
more info
WCDMA preferred option is keeping the 4g active. i am a GSM user so tried GSM only and it worked. but the E symbol is still on.
4g = hspa (3.5g) 4g LTE = LTE
So wcdma preferred = cell and 3g
GSM/wcdma/lte = cell, 3g, LTE
Sent from my HTC One X
PurpleFries said:
Go to dialer and dial *#*#4636#*#*. Go to phone information, and pick wcdma preferred.
Click to expand...
Click to collapse
This doesn't work on the AT&T version (and stock ROM), it will just go back to the default setting.
Only way to really shut it off is to flash a ROM with the LTE toggle.
thanks redpoint. can u suggest me a link where i can get step by step instructions to the rom you are referring to.
this has to get asked atleast 5 times a week since the phone came out
I buy Unlock Phone Samsung Galaxy s II i727r LTE Rogers from Canada right now iam in India my android version is 4.1.2
When i open Network Mode Its showing me
GSM/HSPA/LTE (Auto connect)
GSM/HSPA (auto connect)
GSM only
HSPA Only
1) When i select any of the above option except "GSM only" its showing me weak network signal only 2 to 3 point instead of 5 and its keep on changing frequently not stable and its shows 4G sign but internet speed is good but weak signal because 4g Won't support in india
2) when i select "GSM only" then its show full signal and its work fine but its show 'e' sign means 2g speed very slow internet speed
3) So i talk with Idea Operator they told you select WCDMA Option but that option is not available so how to bring that option in network mode
so please help me to solve this signal problem with 3g running right now weak signal with 4g
Thanks in advance
Hi
Your observation is true..I have Skyrocket,but the ATT Version,using with BSNL..
My network mode is not exactly the same...so..I have 'WCDMA Preferred'..and using it I get 4G(HSPA)..but with 1 or 2 signal bar at my home...but at some places I get good signal(4G is not avaialbale everywhere).Since I'm not a internet freak,i switched over to 'GSM Only'.in which I get at least 4bars..with good internet connectivity('Edge'!)
India is not truly a 3G place,leave alone 4G..Mind you this is the situation at 'India's so called silion valley'--Bangalore:highfive:
If the Rogers one don't have this,may be FLASH a ATT ROM---I use
HTML:
"SUPERLITE ATT JB 4.1.2 RooTeD ... By vincom "[URL="http://forum.xda-developers.com/showthread.php?t=2237940"]http://forum.xda-developers.com/showthread.php?t=2237940[/URL]
Good luk
nrvjain said:
I buy Unlock Phone Samsung Galaxy s II i727r LTE Rogers from Canada right now iam in India my android version is 4.1.2
When i open Network Mode Its showing me
GSM/HSPA/LTE (Auto connect)
GSM/HSPA (auto connect)
GSM only
HSPA Only
1) When i select any of the above option except "GSM only" its showing me weak network signal only 2 to 3 point instead of 5 and its keep on changing frequently not stable and its shows 4G sign but internet speed is good but weak signal because 4g Won't support in india
2) when i select "GSM only" then its show full signal and its work fine but its show 'e' sign means 2g speed very slow internet speed
3) So i talk with Idea Operator they told you select WCDMA Option but that option is not available so how to bring that option in network mode
so please help me to solve this signal problem with 3g running right now weak signal with 4g
Thanks in advance
Click to expand...
Click to collapse
I can't get lte on my nexus 5. I have lte as my preferred network type and i live in an lte coverage area. I have contacted my network service provider and they sent a configuration setting.. but still no lte..what can i do?
Are you using the right APN?
dannyella said:
I can't get lte on my nexus 5. I have lte as my preferred network type and i live in an lte coverage area. I have contacted my network service provider and they sent a configuration setting.. but still no lte..what can i do?
Click to expand...
Click to collapse
Enter *#*#4636#*#* on your dialer, tap Phone Information, scroll down to "Set preferred network type:", and make sure "LTE/GSM auto (PRL)" is selected. (If you're in the US)
Toggle to 3G and then back to LTE after you make sure your APN is correct. I had to do that on mine to get it to grab LTE initially, it's been fine ever since.
yesterday i flashed 23.0.A.2.93, to root and get recovery. when the flash was finished and it reboot, my 4g was gone, and i only got edge. i live in the woods, but i had 4g before. when i went to town, the E changed to H, but still slow, and no 4g. now i've flashed back to 23.1.A.1.28 (modded CE1) and still no 4g. why is this, and what can i do to fix this? i have the right APN
Did you check to make sure 4G is enabled? You can press the 4G switch from the quick settings menu or go into the settings app and then under Wireless and Networks ...More >Mobile Networks > Preferred Network type. Perhaps you have WCDMA (preferred/GSM selected, in which case you won't see the 4G icon come up even if you're in a 4G area. Switch to 4G (preferred/WCDMA/GSM and after a few minutes, your phone should switch to 4G. If it doesn't then tap on Network Operators and see if your network has a 4G signal in your area. You'll see an entry for each available 2G, 3G and 4G signal.
You can also change the preferred network type from the service menu. Dial *#*#SERVICE#*#* and then tap on Network Mode.
Hope that helps.
SF
it was on "WCDMA (preferred)/GSM", changed to "LTE (preferred)/WCDMA/GSM", now i have LTE, but thats not the same as 4g right? *#*#SERVICE#*#* > service settings the "Network Mode" option is grey and it says "N/A"
Suddenly, it started with 4g again, thanks