Database Info

[2G/3G/3.5G] Preferred Network Types Explained & How To Change It Easily

I'm noticing most of us are on the AT&T Network, yet there are those that do not want or need 3G/3.5G and want to use 2G or have another carrier so they cant take advantage of the speeds because they are on a Network such as T-Mobile.
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).

My Samsun S does not recognise my sim.The sim works in another phone. I tried to change the preferred networkto CDMA preferred, as it is on "unknown". It does not allow me to change it. Please help, as this new phone is now doorstopper.

Azizj said:
My Samsun S does not recognise my sim.The sim works in another phone. I tried to change the preferred networkto CDMA preferred, as it is on "unknown". It does not allow me to change it. Please help, as this new phone is now doorstopper.
Click to expand...
Click to collapse
Go to your devices section, seriously...
Sent from Team Pirate! Using Tapatalk 2

legend221 said:
I'm noticing most of us are on the AT&T Network, yet there are those that do not want or need 3G/3.5G and want to use 2G or have another carrier so they cant take advantage of the speeds because they are on a Network such as T-Mobile.
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).
Click to expand...
Click to collapse
This option has not worked on any Sense ROM I have tried for the HTC Inspire. It works great on CM7 but does nothing but stay on 3G on sense.

For sense Rom if you are rooted this is how you do it
From today screen
1. Hit menu
2. Click settings
3. Click wireless and networks
4. Scroll down to mobile networks
5. Choose network mode
6. Change to gsm
This will lock you into edge only. Even after reboot settings will stay phone must be rooted or it does not hold settings
If you want 3g/4g only. Set tab to wcdma only
I am running coredroid 9.4
Sent from my Inspire 4G using xda app-developers app

insanenyc said:
For sense Rom if you are rooted this is how you do it
From today screen
1. Hit menu
2. Click settings
3. Click wireless and networks
4. Scroll down to mobile networks
5. Choose network mode
6. Change to gsm
This will lock you into edge only even after reboot settings will stay phone must be rooted or it does not hold settings
If you want 3g/4g only set tab to wcdma only
I am running coredroid 9.4
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
I have tried this on CoreDroid and ARHD and no luck. Went through settings menu and used the *#*#4636#*#* options and neither one sticks. Could it be my radio and hboot and the interface with Sense?
EDIT: Going to try ARHD again and see. If not, I will try CoreDroid.
EDIT: Still a no go for either ROM...ClearDroid included. So far, I have only been able to do this via either method (plus a built in toggle) via CM7. This begs the question of whether this is a software issue with HTC Sense.

Strange I remember when I was on stock sense Rom the settings wouldn't stick. But as soon as I rooted and downloaded a custom Rom it did stick sorry you are having trouble. Here is my complete rom/radio/kernal
Coredroid 9.4 = Rom
12.56.60.25u_26.10.04.03m=radio
Lordmod 5.0 is the kernal
I also changed my build.prop settings to enable real 4g and tweaked gsm gprs umits huspa hsdpa I do not know if this had any effect on making settings stick
Sent from my Inspire 4G using xda app-developers app

Build.prop tweaks
insanenyc said:
Strange I remember when I was on stock sense Rom the settings wouldn't stick. But as soon as I rooted and downloaded a custom Rom it did stick sorry you are having trouble. Here is my complete rom/radio/kernal
Coredroid 9.4 = Rom
12.56.60.25u_26.10.04.03m=radio
Lordmod 5.0 is the kernal
I also changed my build.prop settings to enable real 4g and tweaked gsm gprs umits huspa hsdpa I do not know if this had any effect on making settings stick
Click to expand...
Click to collapse
Thank you for the feedback. I am running the same radio. I will revisit CoreDroid again. Perhaps editing the build prop is the way to go in this case. It is the one thing I have not tried on any of the ROMs for this phone other than to rename my phone from Desire HD to Inspire (which was only on one or two ROMS). Would you mind sharing your build.prop settings and tweaks so that I can have a baseline to work with? I'll tweak from there as necessary to meet my wants.

I edited only these in build.prop
ro.ril.gprsclass=10
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.hsxpa=2
Reboot twice and don't forget to backup your settings
I used prop editor to edit build.prop its easier but I don't have a link for it but I think there is a link in that thread I posted below
All info can be found here
http://forum.xda-developers.com/showthread.php?t=982082
Sent from my Inspire 4G using xda app-developers app

Give build.prop change a try
insanenyc said:
I edited only these in build.prop
ro.ril.gprsclass=10
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.hsxpa=2
Reboot twice and don't forget to backup your settings
I used prop editor to edit build.prop its easier but I don't have a link for it but I think there is a link in that thread I posted below
All info can be found here
http://forum.xda-developers.com/showthread.php?t=982082
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
Thanks. I will give this a shot. I have edited the build.prop before but only for the purpose of changing device id name. I don't remember what I used to edit it but I am sure I can find it again. No worries about the backups. I kept copies of original build.prop saved plus did a nandroid right before making the changes. Never can be too careful. Will post results later tonight on whether this was success or not for locking in the ability to switch between bands.

In that thread I posted is the build.prop app 8th or 9th post down. That tweak is just for faster data speeds and I do not think it will lock u on to 2 g or 3g but who knows
Sent from my Inspire 4G using xda app-developers app

insanenyc said:
In that thread I posted is the build.prop app 8th or 9th post down. That tweak is just for faster data speeds and I do not think it will lock u on to 2 g or 3g but who knows
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
No go for 2g/3g options. Have not been able to really say about faster data speeds but definitely something I will keep notes on. Back to where I started. Looks like CM will remain my ROM of choice for now.

Preferred network type set to unknown
Hi frnds.. i had accidently set preferred network type to unknown by going in secret setting by using the code *#*#4636#*#* in my Micromax A54 and now my real imei number is changed into 00000000. My mobile is not recognizing any sim and on notification bar it says ''searching for service''. I am not able to reset previous setting i.e. unknown to gsm auto(prl) or gsm only or wcdma only. Please help me how can i resolve my problem.
Your help will be appreciated. thnx in advance..

hi i have samsung note2 my network show unknow but every thing is ok call sms is fine how to i fix it to my network when i restart it they show gprs but when i call some one they going to unknow

Turns out the device has two SIM card slots - one strictly for GSM, another with WCDMA support. If this is the same for you, change SIMcard slot and the preferred network type will change

legend221 said:
I'm noticing most of us are on the AT&T Network, yet there are those that do not want or need 3G/3.5G and want to use 2G or have another carrier so they cant take advantage of the speeds because they are on a Network such as T-Mobile.
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).
Click to expand...
Click to collapse
Hi, here's a tutorial on how to change network modes using AT commands: http://www.josemauricio.net/?p=486

When i try to change my network it automatic changes to wcdma preferred.
When i try to change my network it automatic changes to wcdma preferred

lock your infuse to cdma

Dial *#*#4636#*#* go into phone information scroll down and choose wcdma only and your done default is GSM/WCDMA auto (PRL)

samsungcaptivates said:
Dial *#*#4636#*#* go into phone information scroll down and choose wcdma only and your done default is GSM/WCDMA auto (PRL)
Click to expand...
Click to collapse
please excuse my ignorance, but what would be the purpose of this?

so that it dosent jump around from 3g 2g if its auto and your not using data it automatically defaults to 2g i think to save battery then switches to 3g oir hsdpa 3.5g or what att calls 4g on demand this keeps it locked on wcdma or 4g to my knowledge

samsungcaptivates said:
so that it dosent jump around from 3g 2g if its auto and your not using data it automatically defaults to 2g i think to save battery then switches to 3g oir hsdpa 3.5g or what att calls 4g on demand this keeps it locked on wcdma or 4g to my knowledge
Click to expand...
Click to collapse
seems like it reverts back to auto after a reboot

This makes the phone work on Verizon, right?

MikeyMike01 said:
This makes the phone work on Verizon, right?
Click to expand...
Click to collapse
See that's what I thought too. ATT = GSM, Verizon/Sprint = CDMA.

kwaalude said:
seems like it reverts back to auto after a reboot
Click to expand...
Click to collapse
Mine goes back to auto as soon as I back out of the menu. Am I doing something wrong by using the back button?

wouldn't this, by locking it, render the phone useless when traveling out of area that support that network?

MikeyMike01 said:
This makes the phone work on Verizon, right?
Click to expand...
Click to collapse
roflmao 10char

vbanh said:
Mine goes back to auto as soon as I back out of the menu. Am I doing something wrong by using the back button?
Click to expand...
Click to collapse
Mine does the same thing. did you figure out how to do it? I have been trying but I couldn't do it

I found this here in the forum someone posted and it worked for me thanks for him.
champoux said:
Here's an alternate method I puzzled out (and then afterward discovered it was already posted in thread 751237. It's a bit faster and has the advantage of surviving flight mode; still gets reset upon restart.
Dial *#*#2263#*#* (mnemonic: *#*#BAND#*#*).
This brings up the Band selection menu which you can also access from the above method by dialing *#*#197328640#*#* then going into DEBUG SCREEN > PHONE CONTROL > NETWORK CONTROL.
Select [3] GSM BAND
Select [1] GSM ALL
Select "Select GSM All Bands"
Menu key > END
To switch back, go to *#*#2263#*#* and select [1] AUTOMATIC > Select GSM &WCDMA All Bands > Menu key > END.
Something else I'm trying out is switching the acquisition order so when it is in "dual" mode, it'll try GSM first. Even so, it will still switch to 3g if there's enough signal. Seems to help keep it on 2G though, when it would otherwise cling to a faint 3g signal with 0-1 bars.
To do that, go into the NETWORK CONTROL menu (see above) then
Select [4] AQUISITION ORDER (yes they misspelled it)
Select [2] GSM->UMTS
Select "Select ACQ_ORDER_GSM_FIRST" (at least they abbreviated it correctly)
Menu key > END
This option does not get reset upon phone restart.
Click to expand...
Click to collapse

I did this and now my sms or text messaging don't work help

I had this happen too, but I didn't use the above method. Don't know what happened, but when I checked message settings, I had no number under "Message Center" did a quick google search and found an ATT number "+13123149810"...now it works again.

Did u call the number

Never mind i fixed it.but now in my network type it says umts is that faster then hsdpa and are there any other number sequences i can use to tweak my phone

I'm getting RAT restricted, which I got on my Vibrant but never my Captivate...
How can I change to show the different bands?
Sent from my Samsung Infuse 4G

wcdma and cdma have nothing to do with each other. wcdma is also known as umts, the base part of 3g (and 4g when hspa+). hspa is a protocol that runs on top of this cell technology providing higher data speeds. gprs (known as edge, and some times called gsm) is 2g. you can turn one or another off so the phone does not seek and connect to both services, which could save battery life. even though ive yet to see my phone find less than 3g/4g in houston, i still dont turn it off, just in case.

The Jack of Clubs said:
wcdma and cdma have nothing to do with each other. wcdma is also known as umts, the base part of 3g (and 4g when hspa+). hspa is a protocol that runs on top of this cell technology providing higher data speeds. gprs (known as edge, and some times called gsm) is 2g. you can turn one or another off so the phone does not seek and connect to both services, which could save battery life. even though ive yet to see my phone find less than 3g/4g in houston, i still dont turn it off, just in case.
Click to expand...
Click to collapse
Thanks, John Madden.

How to Fix AT&T Data Throttle Your 4G - Your Data Usage is Among The Top 5% Of Users

How to Fix AT&T Data Throttle Your 4G - Your Data Usage is Among The Top 5% Of Users
There is a nice little APN fix. Just change the APN to Phone and force your phone to use HSPA in your phone's settings. I have instructions with a screenshot...
http://www.traemcneely.com/2011/12/...rottle-4g-data-anti-throttling-trick-for-att/

How do you perform the first step on the skyrocket?
1. Go to Settings > Wireless and Network > Mobile Networks > Click Network Mode and force your phone to use GSM/HSPA (Auto mode).
I don't see "network mode".

Click Access Point Name..
I am now getting 512k vs 150k.
Sent from my SAMSUNG-SGH-I727 using Tapatalk

Found another trick.
I named the access point the same ATT pta, then I put Phone under the APN setting.
Put your phone into GSM/HSPA (auto mode) let it connect to the network,
then go back and put it as HSPA only.....I'm getting 1-2g+ bypassing the throttle using HSPA+ works like a charm.

Att Throttle Samsung Skyrocket
i did all when i click on Mobile networks i see access point names and network operators and use packet data. When i click on network operators is says Default setup doesnt allow me to do anything. Please help

Same here. Don't see 'network.mode' selection. Please help. Does it have to be rooted?
Sent from my SAMSUNG-SGH-I727 using XDA App

I understand there are alot of threds pertaing to this throttling issue. I was given a warning text from att about a week ago now when ever i run my speed test i am only getting around 50kbs thats crazy. I live in pittsburgh which is not an LTE area yet am i screwed? or is there a work around for me????????

there is no network mode on a stock rom.. i posted workarounds on another thread which I started but can't find link now on my phone.. check my profile for my posts
Sent from my SAMSUNG-SGH-I727 using xda premium

*#*#4635#*#*

ajdrausal said:
*#*#4635#*#*
Click to expand...
Click to collapse
*#*#4636#*#*
---------- Post added at 11:36 PM ---------- Previous post was at 11:17 PM ----------
I am still not sure where/how to pick "GSM/HSPA (Auto mode)" on stock rom. Thats not an option.
What I have are:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
(Cut n paste from another thread, dont know if these are applicable to Skyrocket/LTE)

http://forum.xda-developers.com/showthread.php?t=1342111

Thanks for the pointer to the thread but my whole point is that I dont see those options and for some reason my network mode changes dont stick.
So if I disable packet network, switch the APN, change the network mode and then enable the network again, I see that it has gone back to GSM?WCDMA/LTE auto mode again.
So for some reason my network mode changes dont stick. Also, I am on stock rom, could that be the reason!

activemind said:
Thanks for the pointer to the thread but my whole point is that I dont see those options and for some reason my network mode changes dont stick.
So if I disable packet network, switch the APN, change the network mode and then enable the network again, I see that it has gone back to GSM?WCDMA/LTE auto mode again.
So for some reason my network mode changes dont stick. Also, I am on stock rom, could that be the reason!
Click to expand...
Click to collapse
Custom ROMS give you the options you are looking for.

I am confused ! If the stock radio is *locked* to use LTE if available, why are some people reporting to lock onto HSPA+ network with stock ROM. Are they exploiting some bug?
I have tried various things but I cant switch my radio to anything except GSM/WCDMA/LTE auto mode. It seems to come back to that mode.
Do I need a reboot after changing the mode.
I am using *#*4636#*#* to switch the mode.

Switching APN 's worked like a charm ;o)

TE TOQUE said:
Switching APN 's worked like a charm ;o)
Click to expand...
Click to collapse
Over a year since last post and you decide to necro for no good reason smh.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Help 3G, 4G/LTE Not Working on Cyanogenmod 13

I am using cynogenmod 13 latest build all things working perfectly but I'm unable to change connection type to 3G or LTE if selected 2G I have to go to flight mode and then I can change the connection type to LTE only still can't change it to 3G. When it's selected LTE as default even that time also the data connection work still as 2G sign showing as E even if I select LTE never get the H/H sign on my service provider Vodafone India please help me... and sorry for my bad english.

I had a similar problem with CM 12.1, but I solved it changing the APN. My phone has 2 APN available, I just selected the one it wasn't using and I got 4G and 3G again after some minutes.
Hope it helps.

animeshrock said:
I am using cynogenmod 13 latest build all things working perfectly but I'm unable to change connection type to 3G or LTE if selected 2G I have to go to flight mode and then I can change the connection type to LTE only still can't change it to 3G. When it's selected LTE as default even that time also the data connection work still as 2G sign showing as E even if I select LTE never get the H/H sign on my service provider Vodafone India please help me... and sorry for my bad english.
Click to expand...
Click to collapse
Try changing the APN as Secuential said. For Vodafone India, I think it says 'www'.
If that doesn't work, try manually changing it.
Enter *#*#4636#*#* in your dialer.
In the 'Testing' window that appears, go to Phone Information.
Scroll down to Set preferred network type: (The default is LTE/GSM auto (PRL))
Change it to WCDMA only.
It should show H sign after a while.
Good luck.
(Though, keeping WCDMA only can increase battery usage. Change it to 'WCDMA preferred' later)

HTC U11 Drop 4G Network { Latest Android 8 Stock}

Hi
I just got an HTC U11 (128 GB/6 GB) and I updated it to the latest Android Oreo Software No: 2.33.401.19 /Stock No Root
And after update I deleted cash and hard reset the device.
My problem is 4G network drop ....... when I go to the basement the network drop from 4G to 3G, and when I go back upstairs or out of my home, where the 4G network coverage is available the phone keep with 3G network .
Nothing change until I change the network mode say for 2G and get it back to 2G/3G/4G Auto then I will get a 4G or 4G + for a while then it will drop again to H and 3G network !!!
Any fix for this issue ?!
Any body face such an issue ?!
Regards,

Update
After trying the code { *#*#4636#*#* } then phone information then Set Preferred Network Type: according to my Mobile service Support I have to select LTE/CDMA/GSM auto but that option is not available in the list instead there is another select menu item LTE/CDMA/UMTS auto, after selecting this there is no way to save it even after restart.
the selected item by default is LTE/UMTS auto (PRL) ...... and there is no way to change it !!!!
any idea guys

one-option said:
Update
After trying the code { *#*#4636#*#* } then phone information then Set Preferred Network Type: according to my Mobile service Support I have to select LTE/CDMA/GSM auto but that option is not available in the list instead there is another select menu item LTE/CDMA/UMTS auto, after selecting this there is no way to save it even after restart.
the selected item by default is LTE/UMTS auto (PRL) ...... and there is no way to change it !!!!
any idea guys
Click to expand...
Click to collapse
Have you look at settings
dual sim manager
Preferred network mode
Sent from my HTC U11 using XDA Labs

snoopyhaeckers said:
Have you look at settings
dual sim manager
Preferred network mode
Sent from my HTC U11 using XDA Labs
Click to expand...
Click to collapse
The settings is fine
but I believe that it's some power saving thing implemented in the firmware where changing networks take some time longer than other smartphones.