Database Info

PLSSSSSSSS HELPPPPPPPPPPPPPPPPPPPPPPP samsung gt i9003 galaxy s

I flashed my kernel to utterchaos v8 no oc a month ago. Today i wanted to flash it to a stock one and i screwed all things. I dont know why but i used odin with only laguna pit and my phone started into recovery mod. i couldnt recover it and i entered the download mode with 3 button after power off. Then i wanted to make this freakin phone work with flashing back to the stock firmware. But no use.I thought it worked as odin says it had passed but it stuck on welcome screen. Now it says only samsung and 1 step away from starting the phone. Pls help me. My phone was XXKPQ 2.3.6 Russian model.
now I want to flash to 2.3.6 model. PLS HELP ME....
This is my first android phone. Pls help me. I wanted to change things but i screwed everything. PLS HELP

Reshad127 said:
I flashed my kernel to utterchaos v8 no oc a month ago. Today i wanted to flash it to a stock one and i screwed all things. I dont know why but i used odin with only laguna pit and my phone started into recovery mod. i couldnt recover it and i entered the download mode with 3 button after power off. Then i wanted to make this freakin phone work with flashing back to the stock firmware. But no use.I thought it worked as odin says it had passed but it stuck on welcome screen. Now it says only samsung and 1 step away from starting the phone. Pls help me. My phone was XXKPQ 2.3.6 Russian model.
now I want to flash to 2.3.6 model. PLS HELP ME....
This is my first android phone. Pls help me. I wanted to change things but i screwed everything. PLS HELP
Click to expand...
Click to collapse
Try to reflash firmware using odin.

Maybe i do reflashing wrong.
I do
1) Going in to download mode
2) opening odin v 182
3) selecting pda xxkpq.tar.md5
4) unchecking repartition
5) start
then everything works and it says passed
but when it restarts it stucks in the startup samsung doing and doing the same startup screen with intervals

Reshad127 said:
Maybe i do reflashing wrong.
I do
1) Going in to download mode
2) opening odin v 182
3) selecting pda xxkpq.tar.md5
4) unchecking repartition
5) start
then everything works and it says passed
but when it restarts it stucks in the startup samsung doing and doing the same startup screen with intervals
Click to expand...
Click to collapse
After this, flash utterchaous v9 1009 and go to recovery and wipe all.
Then reflash.. Kpq using odin.

where can i find utterchaous v9 1009 ?
I said i am nooooooooooooobbbbbbbbbb))) i am stupid)))

Reshad127 said:
where can i find utterchaous v9 1009 ?
I said i am nooooooooooooobbbbbbbbbb))) i am stupid)))
Click to expand...
Click to collapse
In the android development section of i9003..

Bro first download XXKPE from here
http://forum.xda-developers.com/showthread.php?t=1004647
Then follow the guide to flash XXKPE here
http://forum.xda-developers.com/showthread.php?t=1133787
Then follow the guide to flash XXKPQ again from here
http://forum.xda-developers.com/showthread.php?t=1133787

just enter into download mode.then flash xxkpe (all options wid repartition checked)just allow it to be booted till the homescreen and then again go into diwnload mode and flash xxkpq(repartition unchecked)

I installed utterchaos v9 1009 and it worked. But it started with factory default settings. But the problem is everytime the phone turns on it starts with factory default settings. every time asks me to choose locale, languages and e.t.c.
I will try flashing to xxkpe

Are you sure that the Factory Settings issue wasn't caused by you flashing XXKPE first then XXKPQ?
Try reflashing again.

!n0x said:
Are you sure that the Factory Settings issue wasn't caused by you flashing XXKPE first then XXKPQ?
Try reflashing again.
Click to expand...
Click to collapse
No I hadn't flashed to XXKPE then.

THANKS TO ALL OF UUUUUUUUUUUUUUUUUUUUUUUUUUUUUU> U ARE GREAT)
THANK YOU devilhell007 for providing links, i am new to this forum.
I APPRECIATE IT)

@rsehad127
You will only get the select locale etc just once....
Do not factory reset everytime.

I know the problem here. You flashed from UC kernel , and you must have a partition that was converted to EXT4. you then flashed stock kernel but of course your phone will not boot after that, because stock kernel does not support EXT4 format. after you flashed stock kernel you should go into recovery menu and wipe/factory reset, so the partition will go back to default format, and you can still retain stock kernel.
Delete this message I dont know how I didnt read above that you already got your solution

BassBlaster said:
I know the problem here. You flashed from UC kernel , and you must have a partition that was converted to EXT4. you then flashed stock kernel but of course your phone will not boot after that, because stock kernel does not support EXT4 format. after you flashed stock kernel you should go into recovery menu and wipe/factory reset, so the partition will go back to default format, and you can still retain stock kernel.
Delete this message I dont know how I didnt read above that you already got your solution
Click to expand...
Click to collapse
Correct me if im wrong , but as far as i know every time you flash stock firmware through odin your partition is automatically converted to rfs format

devilhell007 said:
Correct me if im wrong , but as far as i know every time you flash stock firmware through odin your partition is automatically converted to rfs format
Click to expand...
Click to collapse
I guess if you repartition it will be reverted
Cheers
Sent from my GT-i9003 powered by MIUI

devilhell007 said:
Correct me if im wrong , but as far as i know every time you flash stock firmware through odin your partition is automatically converted to rfs format
Click to expand...
Click to collapse
Not until u use latona.pit file with xxkpe. To get back to rfs, u need to flash xxkpe.
Sent from my GT-I9003 using xda premium

SOLVED: Need urgent help, looks like My Samsung Galaxy SL is crashed

Hi Friends,
My phone keeps rebooting, its my mistake.
I had installed RemICS (Custom ROM), without doing wipe cashe and wipe data i tried to install
GB 2.3.6 via Odin.
My even after tring multiple times my devies is rebooting.
Please help me how to recover.
Also i am not able to reach recover mode via Volume Up+Home Key+Power.
Is there any other method to reach into recovery mode.
Kindly help.
Thanks,
Koolanil

U don't need the recovery mode.enter download mode n flash xxkpe with pit twice then flash 2.3.6
sent from my sidelined phone

Will XXKPE fix the problem?
loneagl said:
U don't need the recovery mode.enter download mode n flash xxkpe with pit twice then flash 2.3.6
sent from my sidelined phone
Click to expand...
Click to collapse
I read in some link, that i had to clear cache before downloading is this not required???
If i install XXKPE will this fix the problem?
Thanks for reply.

When u flash a custom Rom the file partition is usually converted to ext.to flash stock u need to convert it back to rfs.so flash xxkpe first
sent from my sidelined phone

I did flash XXKPE twice but still same issue, Boot Looping.
I found two things here,
1. Should i uncheck "Re-Partion"?
2. After installation, mobile went to recovery mode (both time) but i could see error while wiping data.
Did i do all things correctly? Or did i miss something?

oh God, here we go again.
sorry for being rude but here you go:
http://forum.xda-developers.com/showthread.php?t=1133787
please try using that tiny search button again, please.
and..
i think you did not read the instructions carefully before flashing, have you?
anyways, cheers and welcome in here.
:angel:

Could not get help via searching
ibaz said:
oh God, here we go again.
sorry for being rude but here you go:
http://forum.xda-developers.com/showthread.php?t=1133787
please try using that tiny search button again, please.
and..
i think you did not read the instructions carefully before flashing, have you?
anyways, cheers and welcome in here.
:angel:
Click to expand...
Click to collapse
My Fault, i did not read the instructions before downloading into GB version.
I have done all these things written in the post. In some other link http://forum.xda-developers.com/showthread.php?t=1457458
I got to know my problem is similar to the one displayed in the link above. But i could not find these things for Galaxy SL,
Recovery Package/ROM
Kernel and
BootLoader for my phone.
I tried searching but not much useful though.

I'll try to explain how to go to CM9A11. Once you get there, set up your phone the way you want it and make sure it works fine. Then take a nandroid backup (do a search if you don't know how, or send me a pm like a lot of people do). Make a copy of that backup folder to your pc, so you can go back to that if something goes wrong. Then it would be the time to try out different CM9 based ROMs.
=========
Downloads
First download xxkpe firmware package from http://forum.xda-developers.com/showthread.php?t=1004647
Also download ddlf2 firmware from http://forum.xda-developers.com/showthread.php?t=1741370
Plus download DDLF2_CFROOT-05-07-2012.tar from http://forum.xda-developers.com/showthread.php?t=1331253
Finally download cm9a11 and "google apps" package from http://forum.xda-developers.com/showthread.php?t=1449649
Copy cm9a11 and google apps zip file to external sd card, as you'll be flashing them using cwm recovery. Leave the other files on your computer.
Guides
1) Read and follow instructions to flash xxkpe using odin from http://forum.xda-developers.com/showthread.php?t=1133787
2) Repeat steps starting from 9 again.
3) Turn on the phone and make sure its working fine
4) Go back to download mode and flash ddlf2 also using odin exe (provided in xxkpe package)
5) Go back to download mode and flash cf-root for ddlf2 again using odin
6) Turn on the phone and make sure its working fine
7) go to cwm recovery menu and flash cm9a11 using "install zip file from sd card" option. Make sure you religiously follow all instructions on
http://forum.xda-developers.com/showthread.php?t=1449649. I cannot emphasize the importance of following 3-7 steps enough.
========
Hope this helps.

Thanks all, it worked
Thank you all.
I am back on XXKPE right now. I will upgrade to DDLF2 in some time.
How is performance of CM9?
Is it better than RemICS 1.5.3?
I was on RemICS 1.5.3 felt phone is becoming slower and slower thus wanted to shift back to DDLF2.
Right now il be on DDLF2 and will upgrade to CM9 (if its really very good).
Once again thanks all. XXKPE worked

No problems. BTW, I've posted the above help quite a few times in the last month.
If problem is solved, add solved to thread topic to avoid unnecessary subsequent posts.

koolanil81 said:
Thank you all.
I am back on XXKPE right now. I will upgrade to DDLF2 in some time.
How is performance of CM9?
Is it better than RemICS 1.5.3?
I was on RemICS 1.5.3 felt phone is becoming slower and slower thus wanted to shift back to DDLF2.
Right now il be on DDLF2 and will upgrade to CM9 (if its really very good).
Once again thanks all. XXKPE worked
Click to expand...
Click to collapse
Due the least u can do is hit that thanks button for hetalk.he obviously went out of his way to write such a huge guide
sent from my sidelined phone

How did i recover (with help )
Yes i must say Thanks...and i did it.
I would like to write the steps i followed to get out of it so that in future it might help someone else....
1. I followed ibaz and Hetalk's reply downloaded XXPKE from http://forum.xda-developers.com/show....php?t=1133787
2. Installed this using new Odin.
3. Installed DDLF2 on XXKPE
Now my phone is working fine, in some time il update to CM9.
Thanks,
Anil

Just
But ma mobile based on ddkp3 and imu written ddfl2 than what can i do
Sent from my GT-I9003 using xda app-developers app

^^ What exactly do you need to do? Do you want to go to cm9 (ICS rom)?
If yes, it would be better if you follow steps that i mentioned earlier in this thread.

general error after flashing ner ROM..
Hetalk said:
^^ What exactly do you need to do? Do you want to go to cm9 (ICS rom)?
If yes, it would be better if you follow steps that i mentioned earlier in this thread.
Click to expand...
Click to collapse
hallo guys..I NEED UR HELP please...
I have samsung SL 9003 error after i change ROM many time from xxkpe to xxkpQ,,then i flash again to xxkpe,,,Poseidon,,CM9 alpha 9..MUI..now my phone stuck in bootloop..sometime go to normal menu,,but in normal menu sometime restarting again without any button i touch!!,,more worse I click play store app didnt open stuck in white screen,,gmail also i click doesnt work,,some other apps also like facebook force closed..etc,,etc..this happens after i change ROM many time..please could u tell me to recover my 9003 to normal condition again..?
I really apreciate if you could help me//..!
thx..

^^ 1st of all dont panic and reflash xxkpe using http://forum.xda-developers.com/showpost.php?p=30336871&postcount=8
ANd then report back if things work ok. Dont proceed to next step till you verify it working ok.

nandroid backup
Hi, Can you please me how to backup all the contents through nandroid backup before rooting my Samsung Galaxy SL i9003?
Hetalk said:
I'll try to explain how to go to CM9A11. Once you get there, set up your phone the way you want it and make sure it works fine. Then take a nandroid backup (do a search if you don't know how, or send me a pm like a lot of people do). Make a copy of that backup folder to your pc, so you can go back to that if something goes wrong. Then it would be the time to try out different CM9 based ROMs.
=========
Downloads
First download xxkpe firmware package from http://forum.xda-developers.com/showthread.php?t=1004647
Also download ddlf2 firmware from http://forum.xda-developers.com/showthread.php?t=1741370
Plus download DDLF2_CFROOT-05-07-2012.tar from http://forum.xda-developers.com/showthread.php?t=1331253
Finally download cm9a11 and "google apps" package from http://forum.xda-developers.com/showthread.php?t=1449649
Copy cm9a11 and google apps zip file to external sd card, as you'll be flashing them using cwm recovery. Leave the other files on your computer.
Guides
1) Read and follow instructions to flash xxkpe using odin from http://forum.xda-developers.com/showthread.php?t=1133787
2) Repeat steps starting from 9 again.
3) Turn on the phone and make sure its working fine
4) Go back to download mode and flash ddlf2 also using odin exe (provided in xxkpe package)
5) Go back to download mode and flash cf-root for ddlf2 again using odin
6) Turn on the phone and make sure its working fine
7) go to cwm recovery menu and flash cm9a11 using "install zip file from sd card" option. Make sure you religiously follow all instructions on
http://forum.xda-developers.com/showthread.php?t=1449649. I cannot emphasize the importance of following 3-7 steps enough.
========
Hope this helps.
Click to expand...
Click to collapse

^^ Not possible(as far as i know). You need to be rooted to install clockwork recovery. And then you'll be able to take a nandroid backup.

Bootloop, NAND corruption most prob, help?
Hi, I need help for the following if anyone can guide me.
My i9003 was working fine with REMICS 1.6 and then i tried flashing REMICS-JB ontop of it via CVM.
Halfway through the installation, the phone went black and refused to boot. I pulled battery and tried flashing XXPE.
It was successful in ODIN but on boot, gave me the following error
---------------------
E:failed to mount /data (No such file or directory)
--Copying media files...
E:failed to mount /sdcard (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, please use UI menu for format and reboot actions,Meida files copy failed
--Installing Package
Finding update Package
opening update Package
verifying update Package
Installing update
Successfully installed package
--Wiping data...
formatting /data
E:format_volume:rfs format failed on /dev/block/mmcblk0p3
formatting /dbdata...
Formatting /cache
Data wipe failed.
---Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/XEG/system' .
Successfully applied multi-CSC.
------------------------------------
I have gotten my phone to boot via KPE - KPQ - CF-root - MIUI via CWM. But I cannot download apps or receive sms as the phone will say "insufficient memory". Is there any way to recover my phone to minimum function for a few months before I re-contract for a new phone?
There's a thread (http://forum.xda-developers.com/showthread.php?t=1757849) that has a solution which needs me to remove my NAND, I have tried but it's physically difficult to remove the memory, is that the only way? If so, is there anyone who can teach me how to remove the NAND?

[Q] Can I flash a custom ROM using Odin?

To start, I am a lower-than-a-beginner when it comes to this.
I was given a Samsung Galaxy SL i9003 that doesn't seem to function well and force closes all the time. I did a little reading and took a little action.
Here's what I have done so far:
- I tried to reset the phone to factory settings through the phone but to no avail. All apps, files and everything remained.
- I tried to reset the phone through recovery mode and wiped cache and data but got the same result.
- So I thought of rooting it and flashing a custom ROM.
- I flashed a stock ROM (not sure) I found which is a DDKP3 through Odin which went through OK but the phone is still malfunctioning.
- I rooted the phone through a rooting package I found for the DDKP3 through Odin which, again, went through OK.
- The apps are still force closing.
- I found a custom ROM which is a Paranoid Android JB ported for the Samsung Galaxy SL i9003 (not sure if it will work).
- http://forum.xda-developers.com/showthread.php?t=1918789
- Saved the ROM and the gapps zip file to the sdcard.
- Went to recovery mode.
- I am getting a message saying "E:/can't mount sdcard" when I tried to install from zip file.
- I was able to verify that the sdcard is working since I am able to read/write on it through the phone or PC.
Questions:
1. Am I doing the right thing?
2. What am I doing wrong?
3. How should I proceed?
4. Is it possible for me to flash the ROM through Odin since it is a zip file?
5. Do I even have the right ROM?
I am afraid that I might brick the phone.
Any help would be greatly appreciated.

dixtor said:
To start, I am a lower-than-a-beginner when it comes to this.
I was given a Samsung Galaxy SL i9003 that doesn't seem to function well and force closes all the time. I did a little reading and took a little action.
Here's what I have done so far:
- I tried to reset the phone to factory settings through the phone but to no avail. All apps, files and everything remained.
- I tried to reset the phone through recovery mode and wiped cache and data but got the same result.
- So I thought of rooting it and flashing a custom ROM.
- I flashed a stock ROM (not sure) I found which is a DDKP3 through Odin which went through OK but the phone is still malfunctioning.
- I rooted the phone through a rooting package I found for the DDKP3 through Odin which, again, went through OK.
- The apps are still force closing.
- I found a custom ROM which is a Paranoid Android JB ported for the Samsung Galaxy SL i9003 (not sure if it will work).
- http://forum.xda-developers.com/showthread.php?t=1918789
- Saved the ROM and the gapps zip file to the sdcard.
- Went to recovery mode.
- I am getting a message saying "E:/can't mount sdcard" when I tried to install from zip file.
- I was able to verify that the sdcard is working since I am able to read/write on it through the phone or PC.
Questions:
1. Am I doing the right thing?
2. What am I doing wrong?
3. How should I proceed?
4. Is it possible for me to flash the ROM through Odin since it is a zip file?
5. Do I even have the right ROM?
I am afraid that I might brick the phone.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hi there. You can go to this link: http://forum.xda-developers.com/showthread.php?t=1004647 and flashed kpe rom first. Follow the instructions there before flashing to other custom rom including the paranoid rom

icephatom said:
Hi there. You can go to this link: http://forum.xda-developers.com/showthread.php?t=1004647 and flashed kpe rom first. Follow the instructions there before flashing to other custom rom including the paranoid rom
Click to expand...
Click to collapse
Hello!
Thanks for the advice. May I know if I will lose my root access if I will flash the I9003XXKPE ROM?

dixtor said:
Hello!
Thanks for the advice. May I know if I will lose my root access if I will flash the I9003XXKPE ROM?
Click to expand...
Click to collapse
Yes you will lose it. KPE is a clean rom.

fossils deuton
Ditbardh said:
Yes you will lose it. KPE is a clean rom.
Click to expand...
Click to collapse
Thanks for the response.
May I know if this is the best method of rooting the KPE ROM?
http://forum.xda-developers.com/showthread.php?p=18237648
Do you recommend that I root and flash another ROM or stick with the KPE ROM?

dixtor said:
Thanks for the response.
May I know if this is the best method of rooting the KPE ROM?
http://forum.xda-developers.com/showthread.php?p=18237648
Do you recommend that I root and flash another ROM or stick with the KPE ROM?
Click to expand...
Click to collapse
No need to root kpe.its 2.3.4 .flash it twice and next flash a new 2.3.6 stock rom.I recommend ddlf2.its the latest.then you can root it

loneagl said:
No need to root kpe.its 2.3.4 .flash it twice and next flash a new 2.3.6 stock rom.I recommend ddlf2.its the latest.then you can root it
Click to expand...
Click to collapse
I am in the process of downloading the DDLF2 ROM.
But as of this moment I already have the phone rooted through SuperOneClick. Is it okay if I flash the ported ParanoidAndroid ROM along with the gapps zip file since the phone is still not working normally after flashing a stock ROM?
And thank you very much for the advise.

[Q] Stuck in endless Bootloop

i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!​3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!​4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)​

anoopgkris said:
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!​3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!​4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)​
Click to expand...
Click to collapse
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it

Will try this
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
Thanks, will try this tonight
I already took the Nandroid backup before flashing CM10 Beta 4. But was not able to go into it after my phone was soft-bricked.

Solved - booted into 2.3.6 !!!
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
A million thanks!! It somehow started now into the 2.3.6.
Flashing the recovery-clockwork-5.5.0.4-ariesve.tar.md5 did not solve the bootloop. Then i flashed the Boot_loader.tar. That too did not solve the bootloop. Tried Recovery mode again but the SAMSUNG logo kept coming and going until i released my fingers after a full two minutes. Then before the android-out-of-the-box icon came it went straightaway into Recovery .
Wiped Data and Cache and rebooted. After a very very long time it started and asked if im okay with the Google data collection policy asked in Polish language.
Wow, going to update to 4.1.2 Release 2.5 in some time.
Thanks again man. :good:

Got CM10 Beta 4 again !
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help

anoopgkris said:
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
Click to expand...
Click to collapse
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it

[SOLVED] Bootloop problem after soft-brick
parkourkarthik said:
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
Click to expand...
Click to collapse
Sure, thanks !!
Also pasting here an easter egg that i saw after loading Gingerbread 2.3.6 before this CM10.
Putting this because i tried this for the first time in GB (the seven times click on android version)

Galaxy Fit recovery problem, please help!!!!!!!

hello i am new to xda and just created a thread for help about my problem. I flashed razodroid v4 one day and thought of flashing jb 4.2.2 touchwiz rom. I flashed it and it worked fine for some days, then i thought of flashing sd-ext patch and it also worked fine with my ext4 sd card.
one day when i was tired of my slow phone, i installed the badass kernel and it installed succesfully and worked for some hours.....
after that the phone turned off suddenly and never went on always went to the text Galaxy Fit GT-S5670 and then nothing..
then i flashed the froyo official stock rom from odin it worked fine but there the recovery was showing the following problem and i was not able to flash any rom from recovery from that day.....
plzzz help me from this problem i want to upgrade to android 4.3 i am now having the gingerbread stock dxkt7 that i flashed from odin.

Reflash latest 2.3.6 [Gingerbread] firmware using odin --> Wipe everything --> Flash CWM --> Flash your desired ROM following all instructions perfectly..It should solve all problems..
Btw why you had flashed froyo firmware..?
Hit Thanx If I helped U
Bootanimations for MDPI Devices
http://forum.xda-developers.com/showthread.php?t=2126329

dindnt help!!!!!
it didnt help still stuck on the Galaxy Fit text. now I have to reflash gingerbread from odin

ritikbanga said:
it didnt help still stuck on the Galaxy Fit text. now I have to reflash gingerbread from odin
Click to expand...
Click to collapse
The first step I told you is that only..Reflash stock GB 2.3.6 using Odin..-_-
Hit Thanx If I helped U
Bootanimations for MDPI Devices
http://forum.xda-developers.com/showthread.php?t=2126329

that was the first step only......
i did followed the procedure by flashing gb from odin and wiping everything. but that didnt worked so i did flashed gb from odin once more.....................
thanks for your response but the problem is still there......

ritikbanga said:
i did followed the procedure by flashing gb from odin and wiping everything. but that didnt worked so i did flashed gb from odin once more.....................
thanks for your response but the problem is still there......
Click to expand...
Click to collapse
After flashing stock Gingerbread goto stock recovery, wipe data/factory reset and it will boot, have patience.
Flash the CWM v5 (via odin) by tj style, cwm v6 is slow and buggy

problem still persists......
thanks for the help but the problem is still in cwm v5. :crying:
lease help as i want to flash android 4.2 soon.........

ritikbanga said:
thanks for the help but the problem is still in cwm v5. :crying:
lease help as i want to flash android 4.2 soon.........
Click to expand...
Click to collapse
The certain errors u r seeing in cwm recovery will disappear when u flash ny custom rom. They r only visible under samsung official stock rom.
Edit: & do format /system b4 flashing custom rom for the 1st time over stock otherwise u will get hanged at the android-text/boot-up screen forever...remember that..!!

no luck yet!!!!!!!!!!
no method is working on my galaxy fit i try to flash custom roms everyday but it is always stuck on the Galaxy Fit tex. I did wiped system too this time but it didnt help.............

ritikbanga said:
no method is working on my galaxy fit i try to flash custom roms everyday but it is always stuck on the Galaxy Fit tex. I did wiped system too this time but it didnt help.............
Click to expand...
Click to collapse
Oh Bro!! Now I saw ur SS carefully (by zooming). Don't use this recovery by dany... Always use cwm recovery by tjstyles v5.0.2.7.
Now it should definitely work coz I have it already...:thumbup:
Hope this helps...!!!

not working.....
thanks for the reply but i did flashed it with cwm 5 by tj styles before.......
and it is not rebooting.
only able to flash through odin....

problem solved!!!!!!
problem is solved now