Related
i am a dangerous noob =(
i am trying to flash my skyrocket to [ROM][RADIO]UCLA3 2.3.6 STOCK ROM(NOciq)/UCLA3 Modem/FEB 24
i know how to boot to recovery mode so far...
i got the rom and radio downloaded....
can anyone suggest a good tutorial? i tried youtubing skyrocket custom rom installation and i see mostly s2 w/ the middle button that i don't have.
also, how to i not trip the flash counter as someone said it was very annoying to have that on the phone?
and yes this will be my first time flashing my phone. i don't want to have a expensive brick in the end
unlockingsky said:
i am a dangerous noob =(
i am trying to flash my skyrocket to [ROM][RADIO]UCLA3 2.3.6 STOCK ROM(NOciq)/UCLA3 Modem/FEB 24
i know how to boot to recovery mode so far...
i got the rom and radio downloaded....
can anyone suggest a good tutorial? i tried youtubing skyrocket custom rom installation and i see mostly s2 w/ the middle button that i don't have.
also, how to i not trip the flash counter as someone said it was very annoying to have that on the phone?
and yes this will be my first time flashing my phone. i don't want to have a expensive brick in the end
Click to expand...
Click to collapse
As long as you don't flash via Odin you will not increment the counter. Flashing via clockworkmod recovery is safe.
The first post of the thread where u downloaded from has instructions on how to flash. Please read it again.
Sent via smoke signal
unlockingsky said:
i am a dangerous noob =(
i am trying to flash my skyrocket to [ROM][RADIO]UCLA3 2.3.6 STOCK ROM(NOciq)/UCLA3 Modem/FEB 24
i know how to boot to recovery mode so far...
i got the rom and radio downloaded....
can anyone suggest a good tutorial? i tried youtubing skyrocket custom rom installation and i see mostly s2 w/ the middle button that i don't have.
also, how to i not trip the flash counter as someone said it was very annoying to have that on the phone?
and yes this will be my first time flashing my phone. i don't want to have a expensive brick in the end
Click to expand...
Click to collapse
I assume your phone is rooted and CWM installed.
1. Reboot in CWM ( turn off your phone , then press both volume keys and press power wait for samsung logo and relese all buttons)
2. go to backup and restore and buckaup your phone just in case go back
3. Wipe data/factory reset
4. Wipe cache partition
5. go to mount and storage and format system go back to main menu
6. install zip from sdcard
7. choose zip from sdcard
8. flash rom
10 . go back to to main menu and go to advance wipe there Dalvik Cache
11. back to main menu and reboot system now.
Wait for full reboot setup whatever you need to setup. If after rom and modem flash you will have no mobile data reflash rom again.
Good luck
6.
my phone is root on stock firmware.
cwm = clockworkmod?
i see cwm on the market.. which version i should use?
https://market.android.com/search?q=clockworkmod
unlockingsky said:
my phone is root on stock firmware.
cwm = clockworkmod?
i see cwm on the market.. which version i should use?
https://market.android.com/search?q=clockworkmod
Click to expand...
Click to collapse
Download the rom manager app from the market. There is an option to flash cwm from there. Flash the one for the T-Mobile skyrocket.
Sent via smoke signal
Use this one https://market.android.com/details?...yLDEsImNvbS5rb3VzaGlrZHV0dGEucm9tbWFuYWdlciJd
thank you all, i have successfully upgrade to 2.3.6 stock... i will play with custom roms later.
Noob question
cdshepherd said:
ok folks we finally made it. silver has been busting his butt for the past three days, mucho thanks to him.
STOCK ZIPALIGNED UCLA3 2.3.6 ROM---https://www.sugarsync.com/pf/D7693548_2736667_990900
Rom mirror---http://hotfile.com/dl/147732791/c4551c4/UCLA3_2.3.6_rom.zip.html
Wipe data/factory reset
Wipe cache/dalvik
Format /system(under mounts and storage in cwm)
Flash rom
Reboot
Enjoy
Carrier IQ is not present in the stock rom
2.3.6 UCLA3 Stock kernal included in zip
STOCK UCLA3 MODEM --- http://www.mediafire.com/?h7bnu7kvpw7dqtg
Modem mirror https://www.sugarsync.com/pf/D7693548_2736667_990795
Wipe cache partition
Wipe dalvik cache
Reboot
Enjoy
NOTE: Many people have already experienced better signal/data speeds with the stock 2.3.6 UCLA3 Modem/kernal combo. Personally my data speeds went from 3-4mbs up to 8-9mbs after flashing UCLA3 Modem/Kernal combo. The more feedback on this the better.
Good Luck! Look forward to hearing your feedback
Click to expand...
Click to collapse
Sorry for the noob question but are we suppose to flash both files? The ROM and MODEM ?
desilva79 said:
Sorry for the noob question but are we suppose to flash both files? The ROM and MODEM ?
Click to expand...
Click to collapse
You can flash/run various modems, kernels, and rom combinations depending on your particular wants and needs. If you want to stay close to stock, and take advantage of the symbiotic relationship between the UCLA3 rom, kernel, radio, then yes flash both UCLA3 files in cdshepherd's OP. (his ROM has the kernel included). I would suggest flashing modem (radio) first... reboot.. then boot back into CWM to flash rom. For me (and others) when the modem is flashed after rom, the data connection is lost. Follow the install instructions in the OP of the rom. Also, take a look at silver03wrx's Silver_Rom... it's stock UCLA3 but he'll be theming/deodexing it going forward. By the way, I found my HPSA+ speeds significantly increase using the combination of the UCLA3 kernel and modem. Good luck... hope this helped.
Thanks a lot DoctorQMM. That helps a lot . I think I want to stay as close to stock as possible right now while waiting for ICS. I just took the plunge and rooted my phone for the first time so I'm learning as much as I can via google/xda but sometimes I need reassurance just to make sure I don't brick the phone while doing something stupid.
Hi Friends,
My phone keeps rebooting, its my mistake.
I had installed RemICS (Custom ROM), without doing wipe cashe and wipe data i tried to install
GB 2.3.6 via Odin.
My even after tring multiple times my devies is rebooting.
Please help me how to recover.
Also i am not able to reach recover mode via Volume Up+Home Key+Power.
Is there any other method to reach into recovery mode.
Kindly help.
Thanks,
Koolanil
U don't need the recovery mode.enter download mode n flash xxkpe with pit twice then flash 2.3.6
sent from my sidelined phone
Will XXKPE fix the problem?
loneagl said:
U don't need the recovery mode.enter download mode n flash xxkpe with pit twice then flash 2.3.6
sent from my sidelined phone
Click to expand...
Click to collapse
I read in some link, that i had to clear cache before downloading is this not required???
If i install XXKPE will this fix the problem?
Thanks for reply.
When u flash a custom Rom the file partition is usually converted to ext.to flash stock u need to convert it back to rfs.so flash xxkpe first
sent from my sidelined phone
I did flash XXKPE twice but still same issue, Boot Looping.
I found two things here,
1. Should i uncheck "Re-Partion"?
2. After installation, mobile went to recovery mode (both time) but i could see error while wiping data.
Did i do all things correctly? Or did i miss something?
oh God, here we go again.
sorry for being rude but here you go:
http://forum.xda-developers.com/showthread.php?t=1133787
please try using that tiny search button again, please.
and..
i think you did not read the instructions carefully before flashing, have you?
anyways, cheers and welcome in here.
:angel:
Could not get help via searching
ibaz said:
oh God, here we go again.
sorry for being rude but here you go:
http://forum.xda-developers.com/showthread.php?t=1133787
please try using that tiny search button again, please.
and..
i think you did not read the instructions carefully before flashing, have you?
anyways, cheers and welcome in here.
:angel:
Click to expand...
Click to collapse
My Fault, i did not read the instructions before downloading into GB version.
I have done all these things written in the post. In some other link http://forum.xda-developers.com/showthread.php?t=1457458
I got to know my problem is similar to the one displayed in the link above. But i could not find these things for Galaxy SL,
Recovery Package/ROM
Kernel and
BootLoader for my phone.
I tried searching but not much useful though.
I'll try to explain how to go to CM9A11. Once you get there, set up your phone the way you want it and make sure it works fine. Then take a nandroid backup (do a search if you don't know how, or send me a pm like a lot of people do). Make a copy of that backup folder to your pc, so you can go back to that if something goes wrong. Then it would be the time to try out different CM9 based ROMs.
=========
Downloads
First download xxkpe firmware package from http://forum.xda-developers.com/showthread.php?t=1004647
Also download ddlf2 firmware from http://forum.xda-developers.com/showthread.php?t=1741370
Plus download DDLF2_CFROOT-05-07-2012.tar from http://forum.xda-developers.com/showthread.php?t=1331253
Finally download cm9a11 and "google apps" package from http://forum.xda-developers.com/showthread.php?t=1449649
Copy cm9a11 and google apps zip file to external sd card, as you'll be flashing them using cwm recovery. Leave the other files on your computer.
Guides
1) Read and follow instructions to flash xxkpe using odin from http://forum.xda-developers.com/showthread.php?t=1133787
2) Repeat steps starting from 9 again.
3) Turn on the phone and make sure its working fine
4) Go back to download mode and flash ddlf2 also using odin exe (provided in xxkpe package)
5) Go back to download mode and flash cf-root for ddlf2 again using odin
6) Turn on the phone and make sure its working fine
7) go to cwm recovery menu and flash cm9a11 using "install zip file from sd card" option. Make sure you religiously follow all instructions on
http://forum.xda-developers.com/showthread.php?t=1449649. I cannot emphasize the importance of following 3-7 steps enough.
========
Hope this helps.
Thanks all, it worked
Thank you all.
I am back on XXKPE right now. I will upgrade to DDLF2 in some time.
How is performance of CM9?
Is it better than RemICS 1.5.3?
I was on RemICS 1.5.3 felt phone is becoming slower and slower thus wanted to shift back to DDLF2.
Right now il be on DDLF2 and will upgrade to CM9 (if its really very good).
Once again thanks all. XXKPE worked
No problems. BTW, I've posted the above help quite a few times in the last month.
If problem is solved, add solved to thread topic to avoid unnecessary subsequent posts.
koolanil81 said:
Thank you all.
I am back on XXKPE right now. I will upgrade to DDLF2 in some time.
How is performance of CM9?
Is it better than RemICS 1.5.3?
I was on RemICS 1.5.3 felt phone is becoming slower and slower thus wanted to shift back to DDLF2.
Right now il be on DDLF2 and will upgrade to CM9 (if its really very good).
Once again thanks all. XXKPE worked
Click to expand...
Click to collapse
Due the least u can do is hit that thanks button for hetalk.he obviously went out of his way to write such a huge guide
sent from my sidelined phone
How did i recover (with help )
Yes i must say Thanks...and i did it.
I would like to write the steps i followed to get out of it so that in future it might help someone else....
1. I followed ibaz and Hetalk's reply downloaded XXPKE from http://forum.xda-developers.com/show....php?t=1133787
2. Installed this using new Odin.
3. Installed DDLF2 on XXKPE
Now my phone is working fine, in some time il update to CM9.
Thanks,
Anil
Just
But ma mobile based on ddkp3 and imu written ddfl2 than what can i do
Sent from my GT-I9003 using xda app-developers app
^^ What exactly do you need to do? Do you want to go to cm9 (ICS rom)?
If yes, it would be better if you follow steps that i mentioned earlier in this thread.
general error after flashing ner ROM..
Hetalk said:
^^ What exactly do you need to do? Do you want to go to cm9 (ICS rom)?
If yes, it would be better if you follow steps that i mentioned earlier in this thread.
Click to expand...
Click to collapse
hallo guys..I NEED UR HELP please...
I have samsung SL 9003 error after i change ROM many time from xxkpe to xxkpQ,,then i flash again to xxkpe,,,Poseidon,,CM9 alpha 9..MUI..now my phone stuck in bootloop..sometime go to normal menu,,but in normal menu sometime restarting again without any button i touch!!,,more worse I click play store app didnt open stuck in white screen,,gmail also i click doesnt work,,some other apps also like facebook force closed..etc,,etc..this happens after i change ROM many time..please could u tell me to recover my 9003 to normal condition again..?
I really apreciate if you could help me//..!
thx..
^^ 1st of all dont panic and reflash xxkpe using http://forum.xda-developers.com/showpost.php?p=30336871&postcount=8
ANd then report back if things work ok. Dont proceed to next step till you verify it working ok.
nandroid backup
Hi, Can you please me how to backup all the contents through nandroid backup before rooting my Samsung Galaxy SL i9003?
Hetalk said:
I'll try to explain how to go to CM9A11. Once you get there, set up your phone the way you want it and make sure it works fine. Then take a nandroid backup (do a search if you don't know how, or send me a pm like a lot of people do). Make a copy of that backup folder to your pc, so you can go back to that if something goes wrong. Then it would be the time to try out different CM9 based ROMs.
=========
Downloads
First download xxkpe firmware package from http://forum.xda-developers.com/showthread.php?t=1004647
Also download ddlf2 firmware from http://forum.xda-developers.com/showthread.php?t=1741370
Plus download DDLF2_CFROOT-05-07-2012.tar from http://forum.xda-developers.com/showthread.php?t=1331253
Finally download cm9a11 and "google apps" package from http://forum.xda-developers.com/showthread.php?t=1449649
Copy cm9a11 and google apps zip file to external sd card, as you'll be flashing them using cwm recovery. Leave the other files on your computer.
Guides
1) Read and follow instructions to flash xxkpe using odin from http://forum.xda-developers.com/showthread.php?t=1133787
2) Repeat steps starting from 9 again.
3) Turn on the phone and make sure its working fine
4) Go back to download mode and flash ddlf2 also using odin exe (provided in xxkpe package)
5) Go back to download mode and flash cf-root for ddlf2 again using odin
6) Turn on the phone and make sure its working fine
7) go to cwm recovery menu and flash cm9a11 using "install zip file from sd card" option. Make sure you religiously follow all instructions on
http://forum.xda-developers.com/showthread.php?t=1449649. I cannot emphasize the importance of following 3-7 steps enough.
========
Hope this helps.
Click to expand...
Click to collapse
^^ Not possible(as far as i know). You need to be rooted to install clockwork recovery. And then you'll be able to take a nandroid backup.
Bootloop, NAND corruption most prob, help?
Hi, I need help for the following if anyone can guide me.
My i9003 was working fine with REMICS 1.6 and then i tried flashing REMICS-JB ontop of it via CVM.
Halfway through the installation, the phone went black and refused to boot. I pulled battery and tried flashing XXPE.
It was successful in ODIN but on boot, gave me the following error
---------------------
E:failed to mount /data (No such file or directory)
--Copying media files...
E:failed to mount /sdcard (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, please use UI menu for format and reboot actions,Meida files copy failed
--Installing Package
Finding update Package
opening update Package
verifying update Package
Installing update
Successfully installed package
--Wiping data...
formatting /data
E:format_volume:rfs format failed on /dev/block/mmcblk0p3
formatting /dbdata...
Formatting /cache
Data wipe failed.
---Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/XEG/system' .
Successfully applied multi-CSC.
------------------------------------
I have gotten my phone to boot via KPE - KPQ - CF-root - MIUI via CWM. But I cannot download apps or receive sms as the phone will say "insufficient memory". Is there any way to recover my phone to minimum function for a few months before I re-contract for a new phone?
There's a thread (http://forum.xda-developers.com/showthread.php?t=1757849) that has a solution which needs me to remove my NAND, I have tried but it's physically difficult to remove the memory, is that the only way? If so, is there anyone who can teach me how to remove the NAND?
Recently I hard-bricked my Tab whilst installing a Rom on it (Brick Bug). Now I have a replacement, and it's about time I replaced the HC with something else.
I plan to use the 'Singha ROM ICS P6800DXLP7' ROM and ' Dedraks' GT-P6800' kernel. I'm guessing installation for both is via CWM, but that is how I bricked my tab last time. How can I work around this as to not brick it again? Odin? Which do I install first? Any guidance would really be appreciated!
Thanks
Which cwm you using that cause it to brick?
Share some detail procedure...wipe on stock rom, custom rom, kernel...etc which end with brick?
For now I believe safe atm..
- From stock ICS
- Root with this method: http://forum.xda-developers.com/showthread.php?t=1849235
- Install cwm using Mobile Odin
- Boot to cwm recovery
- Flash custom rom and custom kernel
- Reboot recovery NOT reboot system.
- Full wipe and fix permission
- Reboot system to home screen
That what I always do
Here's what works for me
first, d/l CWM to SD card.
then power down.
reboot into download mode ,PC Odin is my install of choice for the roms...
then power down again after the new rom installs and re-boots
re-boot into recovery and choose install zip from SD and choose CWM (which is a temporary install)
dont wipe anything, just choose to install zip and then choose your new kernel.
After kernel (a safe one) installs, then re-boot system.
Ive never bricked this tab or my GN7000 Note
good luck
correct me if im wrong, but as long as you do not factory reset in stock ics recovery you are okay. Right?
Some Note GT 7000 guys reported that they bricked their phablets by copping large files (being on ICS). If this doesn't affect our P6800s, then you are not wrong.
I had installed LQ2 without wiping anything. But had many Screen Offs and Shut Downs, so I considered to risk the clean install.
Did it with Mobile Odin Pro, but first
Ensured that I already have CWM 6.0.0.1
Flashed Dedraks Kernel.
In Mobile Odin chosen "open file..." and then the particular md5 file,
BUT EXCLUDED:
1. Kernel
2. Recovery
Then I selected "wipe" and "clean", crossed my fingers and everything went OK.
Not quite everything, because I lost root, although I am pretty sure that I did not unselect "everroot'.
It was not a big issue. Installed again "root.zip" via CWM recovery.
Its about a week since then and I have nothing to complain.
...
Thanks for the responses guys.
Does this sound safe?:
Flash LQ2 via PC Odin
Root from universal recovery
Flash CWM 6.0.11 via PC Odin
Flash Dedraks Kernel via CWM
Then root again if needed.
Thanks
rumpypumpy said:
Thanks for the responses guys.
Does this sound safe?:
Flash LQ2 via PC Odin
Root from universal recovery
Flash CWM 6.0.11 via PC Odin
Flash Dedraks Kernel via CWM
Then root again if needed.
Thanks
Click to expand...
Click to collapse
Yeah, with these steps you should be safe.
Happy flashing
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
anoopgkris said:
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
Click to expand...
Click to collapse
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Will try this
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
Thanks, will try this tonight
I already took the Nandroid backup before flashing CM10 Beta 4. But was not able to go into it after my phone was soft-bricked.
Solved - booted into 2.3.6 !!!
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
A million thanks!! It somehow started now into the 2.3.6.
Flashing the recovery-clockwork-5.5.0.4-ariesve.tar.md5 did not solve the bootloop. Then i flashed the Boot_loader.tar. That too did not solve the bootloop. Tried Recovery mode again but the SAMSUNG logo kept coming and going until i released my fingers after a full two minutes. Then before the android-out-of-the-box icon came it went straightaway into Recovery .
Wiped Data and Cache and rebooted. After a very very long time it started and asked if im okay with the Google data collection policy asked in Polish language.
Wow, going to update to 4.1.2 Release 2.5 in some time.
Thanks again man. :good:
Got CM10 Beta 4 again !
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
anoopgkris said:
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
Click to expand...
Click to collapse
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
[SOLVED] Bootloop problem after soft-brick
parkourkarthik said:
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
Click to expand...
Click to collapse
Sure, thanks !!
Also pasting here an easter egg that i saw after loading Gingerbread 2.3.6 before this CM10.
Putting this because i tried this for the first time in GB (the seven times click on android version)
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Backup
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
roshan77ss said:
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
Click to expand...
Click to collapse
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
I also tried the fast team one, without any success, when the rom is installed and the device is rebooted, this time the screen stay blocked on "samsung galaxy tab3" for years!!!
sorry, i meant the fast dream rom
I just tried to Flash three roms from sammobile.com (one from hong-kong, one from spain and one from germany) through Odin.
Everytime I get I click on AP to load the rom on odin, I get this message:"md5 error! Binary is invalid".
Since I have rooted the tablet using odin to instal CWM, when I boot the tablet in download mode, I can see:
- PRODUCT NAME: SM-T311
- CURRENT BINARY: Cusom
- SYSTEM STATUS: Custom
Is it related? Someone help plz...
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
anthony239 said:
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
Click to expand...
Click to collapse
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
The Dork Knight Rises said:
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
Click to expand...
Click to collapse
Yea im able to post over there now, thx
backup
anthony239 said:
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
Click to expand...
Click to collapse
dont you have cwm backup? if not then flash stock firmware ,find proper odin flashable packages for your device.
always make backup before flashing any rom.
anthony239 said:
Yea im able to post over there now, thx
Click to expand...
Click to collapse
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
The Dork Knight Rises said:
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
Click to expand...
Click to collapse
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
anthony239 said:
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
Click to expand...
Click to collapse
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
The Dork Knight Rises said:
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
Click to expand...
Click to collapse
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
Try fix or patch.
Or come back to stock rom.
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
Yup, I think you'd better to start over again. Try take a look at this : http://forum.xda-developers.com/showthread.php?t=2401901
It works well for my SM-T311 :good: Then you can reroot and make a backup from TWRP easily.
I also suggest you to take a look at this too : http://forum.xda-developers.com/showthread.php?t=2522091 From there, you can get PhilZ touch recovery based on CWM v.6.0.4.5
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
That's right, look at @Ferris Cruiser's post above. Should help.
(<---Remember to thank him and me if this helps.:good
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
anthony239 said:
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
Click to expand...
Click to collapse
Glad to help! :good:
HELP
I bought a Samsung Galaxy Tab 3 SM-T311 in Mainland China last month and I cannot install google play can anyone help.