Database Info

[Q] Best rom for O3D?

Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out

niko22225 said:
Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out
Click to expand...
Click to collapse
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.

p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
well said sir.

Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2

If i install the bootloader will it work better? The worst problem was that when phone freezed even when trying to play youtube video and I needed to take out battery 4 times a day because of freezes. And If I install all the things which are needed with ROM which would be better xbsall's rom or cm10 / or ThiaiZO3D? I will not act like I know these things I am total noob at this . And Can I brick my phone by changing bootloader or baseband?
Sent from my LG-P920 using xda app-developers app

p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app

Kodaro said:
Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2
Click to expand...
Click to collapse
And what is point of bootloader?
Sent from my LG-P920 using xda app-developers app

niko22225 said:
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Questions should be posted in general section or in a thread about a Rom.
Sent from my LG-P920 using xda app-developers app

Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app

niko22225 said:
Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app

Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.

linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I have installed Cyanogenmod on Multiple Devices not once has it ever bricked a device infact you're more likely to brick your device flashing official updates xbsall has a a guide to recover from a brick so its not even an issue. please do some more reading ics has root . it has recovery just not a Custom one (CWM/TWRP)thats why wkparks Bootloader exists.
IF you Ain't Devi'N Don't a Start A thread in Dev Section.
@Mod Close thread or move it to General.

actually the root doesn't work because you can't get into recovery.
'waiting for device.'

linuxlol said:
actually the root doesn't work because you can't get into recovery.
'waiting for device.'
Click to expand...
Click to collapse
actually, you should read more carefully

tang097 said:
actually, you should read more carefully
Click to expand...
Click to collapse
nope says 'waiting for device.'
it flashes ICS properly but not recovery.
Power + Vol Down + 3d button does nothing but boot phone normally.

berni987654321 said:
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Is there any guide to set up dualboot? and can I brick my phone with it and does It make phone slow ? I heard about xbsalls rom but it is saying that I first need to install different kernel but I dont know how to do that because my recovery doesnt have that option. And Which 4.1 or 4.2 would you recommend? I already used jb. but camera doesnt work and It would be really pain if I want to take a quick picture and I would need to reboot my phone for different rom with working camera. And If I install kernel will it be set on both of the roms? or I can set different for both of them?. btw Thanks for reply

linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I alreaady tried CM both 7.2 and 10 both didnt bricked my phone and I had CWM recovery working with them...and root too...

CyanogenMod works fine - 100%. The reason it get bricked is BECAUSE whoever installed it didn't even pay attention.
And regarding the CWMR in CM10 - it works. I used ADB-flashable version of OMAP4 BIOS (wkpark V1.25a bootloader), and flashed CWMR at the same time as an option.
P.S. I used SuperSU as original Superuser wasn't properly installed in the nightly distro of CM10. Nevertheless, root works fine.
P.S.S. The reason I bricked my LG Thrill 4G was because I was trying too hard.
Sent from my LG-P920 using XDA

[Q] need help for rooting and customization...

i want to root my galaxy tab 2 with customized rom. can you guys plz help me.and tell me the process from the beginning coz im new to android...don't have much experience with it..my device is running android 4.1.2

drago989 said:
i want to root my galaxy tab 2 with customized rom. can you guys plz help me.and tell me the process from the beginning coz im new to android...don't have much experience with it..my device is running android 4.1.2
Click to expand...
Click to collapse
I would start reading some posts in the development forum, and other specific topics on the various steps you will need to take. But...
First you will need to install a custom recovery, like clockwork mod(cwm) or twrp.
Second, you will need to find a ROM specific to your device, making sure to check your model number and only installing a ROM if it is intended for your devices model.
Third, flash the rom .zip in the previously installed recovery.
That's really all you need to do, but you should read how to take those steps in the threads for them and your device.
Sent from my GT-P3110 using xda app-developers app

http://www.youtube.com/watch?v=pAvze-VNzj8
follow this for rooting. Then follow the instructions in the rom thread to flash a rom. if you need help pm me.

bluecarbon said:
I would start reading some posts in the development forum, and other specific topics on the various steps you will need to take. But...
First you will need to install a custom recovery, like clockwork mod(cwm) or twrp.
Second, you will need to find a ROM specific to your device, making sure to check your model number and only installing a ROM if it is intended for your devices model.
Third, flash the rom .zip in the previously installed recovery.
That's really all you need to do, but you should read how to take those steps in the threads for them and your device.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Should i have to change my karnel also?

No
Sent from my GT-P3110 using xda app-developers app

drago989 said:
i want to root my galaxy tab 2 with customized rom. can you guys plz help me.and tell me the process from the beginning coz im new to android...don't have much experience with it..my device is running android 4.1.2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1722745

can i go back to my stock rom, karnel and recovery? if so please give me those link.

drago989 said:
can i go back to my stock rom, karnel and recovery? if so please give me those link.
Click to expand...
Click to collapse
The link I provided you covers all that. Just read it 2 or 3 times and familiarise yourself with everything. :thumbup:
Sent from my GT-I9300 using xda premium

squ89r97 said:
The link I provided you covers all that. Just read it 2 or 3 times and familiarise yourself with everything. :thumbup:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thankx buddy.. but im still not sure abt stock recovery...can i go back to stock recovery as well?

drago989 said:
thankx buddy.. but im still not sure abt stock recovery...can i go back to stock recovery as well?
Click to expand...
Click to collapse
When you flash a stock firmware either from that link or (recommended) sammobile.com, its called stock for a reason it turns the firmware, recovery and kernel back to....err.....stock
Sent from my GT-I9300 using xda premium

squ89r97 said:
When you flash a stock firmware either from that link or (recommended) sammobile.com, its called stock for a reason it turns the firmware, recovery and kernel back to....err.....stock
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thankx mate.... u really help me a lot...:good::laugh:

[Q] 2 Important questions before flashing

Before I start I would like to thank you in advance for dedicating your time to help me here (assuming that you did).I couldn't find the answers on the forums even though I searched.
1. Is there any way to backup my 2.2.1 froyo rom along with the kernel and baseband and EVERYTHING to make sure that if I take it back for repairs they can't accuse me of anything?
2. I have P500H and not the normal P500 mentioned in these forums, is there any risk of brick by flashing another rom designed for P500? And if it does work, will all of my cellular connectivity (RIL, calls, sms, 3G) keep working?

Eden3319 said:
Before I start I would like to thank you in advance for dedicating your time to help me here (assuming that you did).I couldn't find the answers on the forums even though I searched.
1. Is there any way to backup my 2.2.1 froyo rom along with the kernel and baseband and EVERYTHING to make sure that if I take it back for repairs they can't accuse me of anything?
2. I have P500H and not the normal P500 mentioned in these forums, is there any risk of brick by flashing another rom designed for P500? And if it does work, will all of my cellular connectivity (RIL, calls, sms, 3G) keep working?
Click to expand...
Click to collapse
1. yes with LGMDP or KDZ, but you need the stock rom that can be found in general LG P500 http://forum.xda-developers.com/showthread.php?t=1824618
2 read here, it was discussed before http://forum.xda-developers.com/showthread.php?t=1830232
the answers are all in this forum, just try to search, read all sticky and FAQ threads and you should find all answers, but if you want to someone confirm you this, you can make a new thread like this just to be sure, cheers

This is all alittle bit complicated coming from the world of Samsung, is it possible to create a nandroid backup of froyo? is KDZ the equivilant of Odin?

Eden3319 said:
This is all alittle bit complicated coming from the world of Samsung, is it possible to create a nandroid backup of froyo? is KDZ the equivilant of Odin?
Click to expand...
Click to collapse
Having used Odin and kdz I can say that KDZ is *RISKY*
It is maybe equivalent to Odin by the reference to the work they both do
And yeah you can create a nandroid backup of froyo
Sent from my GT-I9082 using xda premium

akiratoriyama said:
Having used Odin and kdz I can say that KDZ is *RISKY*
It is maybe equivalent to Odin by the reference to the work they both do
And yeah you can create a nandroid backup of froyo
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
I would not want anything risky (everything is risky, but I prefer to take it to a minimum level ) as this is not my phone. Do you recommend flashing custom recovery through rom manager?

Eden3319 said:
I would not want anything risky (everything is risky, but I prefer to take it to a minimum level ) as this is not my phone. Do you recommend flashing custom recovery through rom manager?
Click to expand...
Click to collapse
ROM manager has resulted in 100s of bricks (maybe more)
Don't use ROM manager on LGp500
You can use https://play.google.com/store/apps/details?id=acr.recovery.installation.utility
Download amonra 3.06 and extract the recovery.IMG
Then use the above app
Sent from my GT-I9082 using xda premium

akiratoriyama said:
ROM manager has resulted in 100s of bricks (maybe more)
Don't use ROM manager on LGp500
You can use https://play.google.com/store/apps/details?id=acr.recovery.installation.utility
Download amonra 3.06 and extract the recovery.IMG
Then use the above app
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Can it be used on froyo? and do I get the recovery image from here http://www.clockworkmod.com/rommanager ?

Eden3319 said:
Can it be used on froyo? and do I get the recovery image from here http://www.clockworkmod.com/rommanager ?
Click to expand...
Click to collapse
Yes the app is compatible with froyo
But I had issues with clockworkmod recovery
Download amonra 3.06 recovery for LGP500
It is the most stable recovery for this phone according to me :thumbup:
Here is the file for your convenience
http://www.mediafire.com/download/iwoygujg0qztoof/AmonRa_3.06_Recovery_ThunderG.zip
Copy the recovery.IMG extracted from the above file to the phones SD card And use the app I gave
Sent from my GT-I9082 using xda premium

akiratoriyama said:
Yes the app is compatible with froyo
But I had issues with clockworkmod recovery
Download amonra 3.06 recovery for LGP500
It is the most stable recovery for this phone according to me :thumbup:
Here is the file for your convenience
http://www.mediafire.com/download/iwoygujg0qztoof/AmonRa_3.06_Recovery_ThunderG.zip
Copy the recovery.IMG extracted from the above file to the phones SD card And use the app I gave
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
For some reason I can't root my device via GingerBreak v1.2 :\ It appears to be stuck, or just rooting forever. USB debugging is on.

Eden3319 said:
For some reason I can't root my device via GingerBreak v1.2 :\ It appears to be stuck, or just rooting forever. USB debugging is on.
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=833953
Never used gingerbreak
Most say it works
***EDIT***
Just read that gingerbreak only supports 2.2.2 and not 2.2.1
Better use z4root i.e the from the above link
Sent from my GT-I9082 using xda premium

akiratoriyama said:
Try http://forum.xda-developers.com/showthread.php?t=833953
Never used gingerbreak
Most say it works
***EDIT***
Just read that gingerbreak only supports 2.2.2 and not 2.2.1
Better use z4root i.e the from the above link
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
z4root didn't work either, progressed alittle bit, then crashed to the launcher and the app became inaccessible. Tried twice.
EDIT: Superoneclick worked, proceeding now to recovery installation.

Eden3319 said:
z4root didn't work either, progressed alittle bit, then crashed to the launcher and the app became inaccessible. Tried twice.
EDIT: Superoneclick worked, proceeding now to recovery installation.
Click to expand...
Click to collapse
Good luck then
Sent from my GT-I9082 using xda premium

I'm sorry to bump this after so long, I just didn't have the courage to flash the recovery (when I got stuck on the fastboot screen I thought that the device is going to the trash can), I have now CWM v5.0.2.0 but I get a message:
E:Bad boot message
"recovery"
Is it safe to proceed? what does this message mean?

Eden3319 said:
I'm sorry to bump this after so long, I just didn't have the courage to flash the recovery (when I got stuck on the fastboot screen I thought that the device is going to the trash can), I have now CWM v5.0.2.0 but I get a message:
E:Bad boot message
"recovery"
Is it safe to proceed? what does this message mean?
Click to expand...
Click to collapse
That's a standard message which almost everyone gets on booting CWM recovery
Go forward and flash a ROM
Sent from my GT-I9082 using xda premium

akiratoriyama said:
That's a standard message which almost everyone gets on booting CWM recovery
Go forward and flash a ROM
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Do you recommend the builds from Jenkins site? Are they stable enough to flash? http://jenkins.androidarmv6.org/job/android/393/ This for example?

Eden3319 said:
Do you recommend the builds from Jenkins site? Are they stable enough to flash? http://jenkins.androidarmv6.org/job/android/393/ This for example?
Click to expand...
Click to collapse
I don't like *any* of the Jenkins builds as they are pathetically slow for me even on fresh installations
According to me you should either try Oxygen ICS or Rashed97's CM10
Remember the above ROMs are of my personal preference
And if you are inclined to use Jenkins build *try* them
Sent from my GT-I9082 using xda premium

akiratoriyama said:
I don't like *any* of the Jenkins builds as they are pathetically slow for me even on fresh installations
According to me you should either try Oxygen ICS or Rashed97's CM10
Remember the above ROMs are of my personal preference
And if you are inclined to use Jenkins build *try* them
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Isn't jenkins the only one that have 4.2.2? and soon maybe 4.3?

Eden3319 said:
Isn't jenkins the only one that have 4.2.2? and soon maybe 4.3?
Click to expand...
Click to collapse
There are some ROMs based on 4.2.2
One I like is
http://forum.xda-developers.com/showthread.php?t=2213967
Sent from my GT-I9082 using xda premium

akiratoriyama said:
There are some ROMs based on 4.2.2
One I like is
http://forum.xda-developers.com/showthread.php?t=2213967
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
I will use this http://forum.xda-developers.com/showthread.php?t=1811325 for now
And when this gets to the step that it's stable enough I'll use this http://forum.xda-developers.com/showthread.php?t=2382045 from the same developer.
I will let you know after I flash it, now I'm waiting for the battery to charge

Eden3319 said:
I will use this http://forum.xda-developers.com/showthread.php?t=1811325 for now
And when this gets to the step that it's stable enough I'll use this http://forum.xda-developers.com/showthread.php?t=2382045 from the same developer.
I will let you know after I flash it, now I'm waiting for the battery to charge
Click to expand...
Click to collapse
Best of luck
Do remember trimming the ROM before flashing gapps and then thanking my post otherwise you may get possible bootloop
And flash the oldBB fix after flashing the ROM (search it)
More info
http://forum.xda-developers.com/showthread.php?t=2149636
Sent from my GT-I9082 using xda premium

Flashoholics!!

Just trying to be helpful here, here is a faster way to get from stock one-click to JB goodness.....
After you flash to stock with antonx kernel reboot into recovery and flash bhundvens blastoff kernel, reboot recovery, now you should be in blue 5.0.2.8....flash the newest cm9, it will reboot automatically into recovery for you to flash a second time, but don't, instead flash a JB Rom, (I flashed chaos from dao) once it rebooted into recovery...jellybean recovery, I flashed the Rom plus gapps. Rom booted just fine.
So.....save a little time from completely flashing the whole rom, waiting for it to boot and rebooting into recovery just to do it again till you get where you want.....cheers
hopefully it saves you some time
************************just like everyone else says "I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE"*****************
just one-click back and start over hee hee!!!!

If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.

You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.

AnAznBoy9724 said:
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
Click to expand...
Click to collapse
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app

ArmyofTracy said:
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Getting back to stock and rooting are totally different subjects and shouldn't be asked in ROM threads anyways. Flashing the ROM are always in the OP.

I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app

limeaide said:
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
Click to expand...
Click to collapse
If you go back to our early JB ROMs
It was said to flash cm 9 or be on
a ICS ROM first if coming from GB.
Its said to be different now...
I still don't trust it..out of habit and
because it has always worked..
If I one-click back to stock I always
flash cm9 first then flash JB.
Sent from my SGH-T959V using xda premium

ArmyofTracy said:
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?

AnAznBoy9724 said:
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
Click to expand...
Click to collapse
Why do we need a mod
to clean up this thread...
Because you made a Remark
and he called you out.
He said thank you...
Relax its all good...
Sent from my SGH-T959V using xda premium

It's a useless arguement no one needs to see.

:banghead:

ArmyofTracy said:
:banghead:
Click to expand...
Click to collapse
\m/

[Q] How to install custom recovery after root?

first things first. I'm a noob. HAHA. but i'm willing to learn.
I recently rooted my phone by using chainfire's CF-AUTO-ROOT and it has stock recovery on it. Now, I want to install a custom recovery, specifically cwm recovery. How will be able to do this? Do I have to unroot then root again? a step by step info will be appreciated. thanks

First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app

Use the search function, read, profit.
Sent high from my SGH-M919

reply
vehvariya said:
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
done finding cwm file that's compatible with my tab
Flashing? not really that well with android terms yet. after clicking "pda" then selecting the cwm file, should I click start? is that what you meant by flashing?
I appreciate your help.

Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app

Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app

reply
vehvariya said:
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Got that! followed exactly what you said and poof - custom recovery. may i ask if you installed a custom rom in your tab 2? and if so, what rom is it?

reply
mymeatb18 said:
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?

My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app

rom?
vehvariya said:
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I also would like to install cm 10.2. is it stable? I tried searching and I found pac rom and if i'm not mistaken 3 custom roms are installed into 1 rom.
I also would like to ask if it is really necessary to wipe all data before installing a new rom? and if so, would apps like titanium backup pro would be able to backup every single app or information that is in my tab/

Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app

i use cm10.1.3rc2, it's good!
just release at 2013-9-5

cm10.1
impliu said:
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
Click to expand...
Click to collapse
I would like to give that a try. do you have any links on where I can find instructions on how to install that? also links on the files that are needed. thanks.

cm10.2
vehvariya said:
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
can you post a link on how to install cm10.2 along with the files that are needed to be downloaded. thanks.

Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app

superSUnoob said:
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
Click to expand...
Click to collapse
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.

ROMaholic
king200 said:
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
Click to expand...
Click to collapse
just noticed that my thread is changing direction
I would like to give that "sicked based ROM" a try. any links to those ROMs? and if im not contented, I can revert back to stock rom right? or can I try the "sicked based ROM" and stock ROM thru dual booting?

reply
vehvariya said:
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
thanks for this info. I will try this before I try the "sicked based ROM" (evil laugh) :laugh: